Resources

An analytical chemist titrates a 20.00 mL20.00\text{ mL} aliquot of an unknown diprotic acid (H2AH_2A) with 0.1500 M0.1500\text{ M} NaOH\text{NaOH}. The second equivalence point of the titration is reached upon the addition of 36.80 mL36.80\text{ mL} of NaOH\text{NaOH}. Determine the initial molar concentration of the diprotic acid solution.

Answer and steps

Final answer

0.1380 M0.1380\text{ M}

Steps

01

Write the balanced chemical equation

A diprotic acid (HX2A\ce{H2A}) possesses two titratable acidic protons. At the second equivalence point, both acidic protons have been completely neutralized by the sodium hydroxide (NaOH\ce{NaOH}):

HX2A(aq)+2 NaOH(aq)→NaX2A(aq)+2 HX2O(l)\ce{H2A(aq) + 2NaOH(aq) -> Na2A(aq) + 2H2O(l)}

From the stoichiometry of the reaction: Mole ratio=1 mol HX2A2 mol NaOH\text{Mole ratio} = \frac{1\text{ mol }\ce{H2A}}{2\text{ mol }\ce{NaOH}}


02

Calculate the moles of NaOH\ce{NaOH} added

Using the molarity (MM) and volume (VV) of the titrant added at the second equivalence point:

nNaOH=MNaOH⋅VNaOHn_{\ce{NaOH}} = M_{\ce{NaOH}} \cdot V_{\ce{NaOH}}

Convert the volume from milliliters to liters: VNaOH=36.80 mL=0.03680 LV_{\ce{NaOH}} = 36.80\text{ mL} = 0.03680\text{ L}

Substitute the values: nNaOH=0.1500 M⋅0.03680 L=5.520×10−3 moln_{\ce{NaOH}} = 0.1500\text{ M} \cdot 0.03680\text{ L} = 5.520 \times 10^{-3}\text{ mol}


03

Determine the moles of HX2A\ce{H2A} neutralized

Using the 1:21:2 stoichiometric ratio from the balanced equation:

nHX2A=nNaOH2=5.520×10−3 mol2=2.760×10−3 moln_{\ce{H2A}} = \frac{n_{\ce{NaOH}}}{2} = \frac{5.520 \times 10^{-3}\text{ mol}}{2} = 2.760 \times 10^{-3}\text{ mol}

Common Pitfall: Assuming a 1:11:1 stoichiometric ratio (M1V1=M2V2M_1V_1 = M_2V_2) is a frequent mistake. That relationship applies only to monoprotic acids or at the first equivalence point. For a diprotic acid reaching its second equivalence point, each mole of acid requires two moles of base.


04

Calculate the initial molar concentration of HX2A\ce{H2A}

The volume of the acid aliquot is 20.00 mL=0.02000 L20.00\text{ mL} = 0.02000\text{ L}. The initial molarity is:

MHX2A=nHX2AVHX2A=2.760×10−3 mol0.02000 L=0.1380 MM_{\ce{H2A}} = \frac{n_{\ce{H2A}}}{V_{\ce{H2A}}} = \frac{2.760 \times 10^{-3}\text{ mol}}{0.02000\text{ L}} = 0.1380\text{ M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes a 1:1 stoichiometric ratio between the acid and base instead of accounting for the two moles of NaOH required per mole of diprotic acid at the second equivalence point.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(NaOH)=0.1500 M×0.03680 L=0.005520 moln(\ce{NaOH}) = 0.1500\text{ M} \times 0.03680\text{ L} = 0.005520\text{ mol}

  2. Step 2

    n(HX2A)=n(NaOH)=0.005520 moln(\ce{H2A}) = n(\ce{NaOH}) = 0.005520\text{ mol}

    Correct

    n(HX2A)=12n(NaOH)=0.005520 mol2=0.002760 moln(\ce{H2A}) = \frac{1}{2} n(\ce{NaOH}) = \frac{0.005520\text{ mol}}{2} = 0.002760\text{ mol}

    At the second equivalence point of a diprotic acid titration, each mole of HX2A\ce{H2A} reacts with two moles of OHX−\ce{OH-}, giving the stoichiometric ratio 1 mol HX2A:2 mol NaOH1\text{ mol }\ce{H2A} : 2\text{ mol }\ce{NaOH}.

  3. Step 3

    M(HX2A)=0.005520 mol0.02000 L=0.2760 MM(\ce{H2A}) = \frac{0.005520\text{ mol}}{0.02000\text{ L}} = 0.2760\text{ M}

    Correct

    M(HX2A)=0.002760 mol0.02000 L=0.1380 MM(\ce{H2A}) = \frac{0.002760\text{ mol}}{0.02000\text{ L}} = 0.1380\text{ M}

    You correctly divided your calculated moles of acid by the aliquot volume, but the result is doubled due to the earlier stoichiometric error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of NaOH\ce{NaOH} used by converting milliliters to liters.

You correctly set up the final molarity calculation by dividing the moles of solute by the solution volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Ratio Error in Polyprotic Titration

You treated the neutralization as a 1:11:1 reaction instead of using the 1:21:2 ratio required for a diprotic acid at its second equivalence point.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating general titration formulas (M1V1=M2V2M_1V_1 = M_2V_2) with multi-proton equivalence stoichiometry, overlooking that reaching the second equivalence point requires neutralizing both ionizable protons.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Acid Proticity and Target Equivalence Point
  • For an acid HXnA\ce{H_nA}, the kk-th equivalence point requires kk moles of monoprotic base per mole of acid: HXnA+k OHX−→HXn−kAXk−+k HX2O\ce{H_nA + k OH- -> H_{n-k}A^{k-} + k H2O}.

  • Always write the balanced overall equation for the specific equivalence point before relating the moles of acid and base.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the balanced chemical equation at the second equivalence point: HX2A+2 NaOH→NaX2A+2 HX2O\ce{H2A + 2NaOH -> Na2A + 2H2O}.

  2. Determine the moles of HX2A\ce{H2A}: n(HX2A)=n(NaOH)2=0.005520 mol2=0.002760 moln(\ce{H2A}) = \frac{n(\ce{NaOH})}{2} = \frac{0.005520\text{ mol}}{2} = 0.002760\text{ mol}.

  3. Divide by the aliquot volume (0.02000 L0.02000\text{ L}): M(HX2A)=0.002760 mol0.02000 L=0.1380 MM(\ce{H2A}) = \frac{0.002760\text{ mol}}{0.02000\text{ L}} = 0.1380\text{ M}.

Final answer

0.1380 M0.1380\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the balanced chemical equation for the specific equivalence point before performing stoichiometric conversions.

  • Double-check whether the acid is monoprotic, diprotic, or triprotic whenever an equivalence point is specified.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies by 2 instead of dividing by 2 when converting moles of NaOH to moles of H₂A.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(NaOH)=0.1500 M×0.03680 L=0.005520 moln(\ce{NaOH}) = 0.1500\text{ M} \times 0.03680\text{ L} = 0.005520\text{ mol}

  2. Step 2

    n(HX2A)=0.005520 mol×2=0.01104 moln(\ce{H2A}) = 0.005520\text{ mol} \times 2 = 0.01104\text{ mol}

    Correct

    n(HX2A)=0.005520 mol×1 mol HX2A2 mol NaOH=0.002760 moln(\ce{H2A}) = 0.005520\text{ mol} \times \frac{1\text{ mol }\ce{H2A}}{2\text{ mol }\ce{NaOH}} = 0.002760\text{ mol}

    The neutralization equation is HX2A+2 NaOH→NaX2A+2 HX2O\ce{H2A + 2NaOH -> Na2A + 2H2O}, which means 1 mol of HX2A1\text{ mol of }\ce{H2A} reacts with 2 mol of NaOH2\text{ mol of }\ce{NaOH}. Therefore, the moles of HX2A\ce{H2A} must be half the moles of NaOH\ce{NaOH}, not twice as many.

  3. Step 3

    M(HX2A)=0.01104 mol/0.02000 L=0.5520 MM(\ce{H2A}) = 0.01104\text{ mol} / 0.02000\text{ L} = 0.5520\text{ M}

    Correct

    M(HX2A)=0.002760 mol0.02000 L=0.1380 MM(\ce{H2A}) = \frac{0.002760\text{ mol}}{0.02000\text{ L}} = 0.1380\text{ M}

    Your volume conversion and formula setup were correct, but the calculated molarity was off by a factor of 4 because of the inverted stoichiometric ratio from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted milliliters to liters properly for both the titrant and the acid aliquot.

You accurately computed the total moles of NaOH\ce{NaOH} added from its volume and molarity.

You used the correct definition of molarity to find the concentration in the final step.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Stoichiometric Ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recognized that a factor of 2 relates NaOH\ce{NaOH} and HX2A\ce{H2A}, but you inverted the dimensional analysis conversion factor, multiplying by 2 instead of multiplying by 1 mol HX2A2 mol NaOH\frac{1\text{ mol }\ce{H2A}}{2\text{ mol }\ce{NaOH}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the balanced chemical equation
  • Neutralization of a diprotic acid at the second equivalence point requires 2 equivalents of strong monoprotic base: HX2A+2 OHX−→AX2−+2 HX2O\ce{H2A + 2OH- -> A^{2-} + 2H2O}.

  • Always write out the balanced reaction so you can directly see the stoichiometric coefficient in front of each reactant.

Use dimensional analysis with explicit units
  • moles of unknown=moles of known×coefficient of unknowncoefficient of known\text{moles of unknown} = \text{moles of known} \times \frac{\text{coefficient of unknown}}{\text{coefficient of known}}.

  • Include chemical formulas in your conversion units (e.g., 1 mol HX2A2 mol NaOH\frac{1\text{ mol }\ce{H2A}}{2\text{ mol }\ce{NaOH}}) so that mol NaOH\ce{mol NaOH} cancels out cleanly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the stoichiometric ratio 1 mol HX2A2 mol NaOH\frac{1\text{ mol }\ce{H2A}}{2\text{ mol }\ce{NaOH}}: n(HX2A)=0.005520 mol NaOH×1 mol HX2A2 mol NaOH=0.002760 mol HX2An(\ce{H2A}) = 0.005520\text{ mol }\ce{NaOH} \times \frac{1\text{ mol }\ce{H2A}}{2\text{ mol }\ce{NaOH}} = 0.002760\text{ mol }\ce{H2A}.

  2. Divide by the aliquot volume (0.02000 L0.02000\text{ L}): M(HX2A)=0.002760 mol0.02000 L=0.1380 MM(\ce{H2A}) = \frac{0.002760\text{ mol}}{0.02000\text{ L}} = 0.1380\text{ M}.

Final answer

0.1380 M0.1380\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write full dimensional analysis labels with chemical formulas (like mol NaOH\text{mol }\ce{NaOH} and mol HX2A\text{mol }\ce{H2A}) rather than just bare numbers.

  • Perform a sanity check: since each acid molecule neutralizes two base molecules, there must be fewer moles of acid present than moles of base added.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the concentration using the total combined solution volume at equivalence instead of the initial volume of the acid aliquot.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(NaOH)=0.1500 M×0.03680 L=0.005520 moln(\ce{NaOH}) = 0.1500\text{ M} \times 0.03680\text{ L} = 0.005520\text{ mol}

  2. Step 2

    n(HX2A)=0.005520 mol2=0.002760 moln(\ce{H2A}) = \frac{0.005520\text{ mol}}{2} = 0.002760\text{ mol}

  3. Step 3

    Vtotal=20.00 mL+36.80 mL=56.80 mL=0.05680 LV_{\text{total}} = 20.00\text{ mL} + 36.80\text{ mL} = 56.80\text{ mL} = 0.05680\text{ L}

    Correct

    Valiquot=20.00 mL=0.02000 LV_{\text{aliquot}} = 20.00\text{ mL} = 0.02000\text{ L}

    You summed the acid and titrant volumes to get the total mixture volume. To find the initial concentration of the original acid solution, you must use only the initial aliquot volume (20.00 mL20.00\text{ mL}).

  4. Step 4

    M(HX2A)=0.002760 mol0.05680 L=0.04859 MM(\ce{H2A}) = \frac{0.002760\text{ mol}}{0.05680\text{ L}} = 0.04859\text{ M}

    Correct

    MHX2A=0.002760 mol0.02000 L=0.1380 MM_{\ce{H2A}} = \frac{0.002760\text{ mol}}{0.02000\text{ L}} = 0.1380\text{ M}

    Because you divided by the combined final volume instead of the original sample volume, your final concentration is too low.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted milliliters to liters when finding the titrant moles.

You identified the diprotic nature of the acid and applied the 1:21:2 mole ratio correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Volume in Initial Concentration Calculation

You found the total volume of the titration mixture at equivalence rather than the volume of the original acid aliquot.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the initial sample volume with the total diluted volume of the titration mixture at the endpoint.

REASONING PATH
Your ACEpath teacher’s suggested approach
Initial Concentration Definition
  • Initial molarity equals moles of solute divided by the original volume of that sample: M0=nVsampleM_0 = \frac{n}{V_{\text{sample}}}.

  • Always identify whether the question asks for the concentration in the original sample or in the mixture at equivalence.

Titration Volume Tracking
  • Titrant volume is used only to calculate moles added; it does not increase the initial volume of the analyte aliquot.

  • Keep VtitrantV_{\text{titrant}} and VanalyteV_{\text{analyte}} separate throughout your work.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the original aliquot volume of HX2A\ce{H2A}: Vinitial=20.00 mL=0.02000 LV_{\text{initial}} = 20.00\text{ mL} = 0.02000\text{ L}.

  2. Calculate initial molarity: MHX2A=nHX2AVinitial=0.002760 mol0.02000 L=0.1380 MM_{\ce{H2A}} = \frac{n_{\ce{H2A}}}{V_{\text{initial}}} = \frac{0.002760\text{ mol}}{0.02000\text{ L}} = 0.1380\text{ M}.

Final answer

0.1380 M0.1380\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between original sample volume and combined mixture volume.

  • Practice identifying the requested concentration (initial analyte vs. post-mixing) in multi-step titration problems.

Lock it in

Similar question

01

A 25.00 mL25.00\text{ mL} sample of an unknown diprotic acid solution requires 18.40 mL18.40\text{ mL} of 0.2000 M KOH0.2000\text{ M } \ce{KOH} to reach its first equivalence point. What is the initial molarity of the diprotic acid?

Answer

0.1472 M0.1472\text{ M}. Key steps: At the first equivalence point, the ratio is 1:11:1 (HX2A+OHX−→HAX−+HX2O\ce{H2A + OH- -> HA- + H2O}). n(KOH)=0.2000 M×0.01840 L=3.680×10−3 moln(\ce{KOH}) = 0.2000\text{ M} \times 0.01840\text{ L} = 3.680 \times 10^{-3}\text{ mol}. Thus, n(HX2A)=3.680×10−3 moln(\ce{H2A}) = 3.680 \times 10^{-3}\text{ mol}. M(HX2A)=3.680×10−3 mol0.02500 L=0.1472 MM(\ce{H2A}) = \frac{3.680 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.1472\text{ M}.

02

A 15.00 mL15.00\text{ mL} aliquot of citric acid, a triprotic acid (HX3A\ce{H3A}), is titrated with 0.1250 M NaOH0.1250\text{ M } \ce{NaOH}. The third equivalence point is reached after adding 31.20 mL31.20\text{ mL} of titrant. Calculate the molar concentration of the citric acid solution.

Answer

0.08667 M0.08667\text{ M}. Key steps: At the third equivalence point, HX3A+3 NaOH→NaX3A+3 HX2O\ce{H3A + 3NaOH -> Na3A + 3H2O}, so n(HX3A)=n(NaOH)3n(\ce{H3A}) = \frac{n(\ce{NaOH})}{3}. n(NaOH)=0.1250 M×0.03120 L=3.900×10−3 moln(\ce{NaOH}) = 0.1250\text{ M} \times 0.03120\text{ L} = 3.900 \times 10^{-3}\text{ mol}. n(HX3A)=3.900×10−3 mol3=1.300×10−3 moln(\ce{H3A}) = \frac{3.900 \times 10^{-3}\text{ mol}}{3} = 1.300 \times 10^{-3}\text{ mol}. M(HX3A)=1.300×10−3 mol0.01500 L=0.08667 MM(\ce{H3A}) = \frac{1.300 \times 10^{-3}\text{ mol}}{0.01500\text{ L}} = 0.08667\text{ M}.

03

A chemist mixes 0.245 g0.245\text{ g} of a solid unknown diprotic acid (molar mass =126.07 g/mol= 126.07\text{ g/mol}) in water and titrates it to the second equivalence point with a NaOH\ce{NaOH} solution of unknown concentration. If 28.35 mL28.35\text{ mL} of NaOH\ce{NaOH} is consumed, determine the molarity of the NaOH\ce{NaOH} solution.

Answer

0.137 M0.137\text{ M}. Key steps: n(HX2A)=0.245 g126.07 g/mol=1.943×10−3 moln(\ce{H2A}) = \frac{0.245\text{ g}}{126.07\text{ g/mol}} = 1.943 \times 10^{-3}\text{ mol}. At the second equivalence point, n(NaOH)=2×n(HX2A)=3.887×10−3 moln(\ce{NaOH}) = 2 \times n(\ce{H2A}) = 3.887 \times 10^{-3}\text{ mol}. M(NaOH)=3.887×10−3 mol0.02835 L=0.137 MM(\ce{NaOH}) = \frac{3.887 \times 10^{-3}\text{ mol}}{0.02835\text{ L}} = 0.137\text{ M}.

Loading workspace…