Resources
An aqueous beaker contains a saturated solution of calcium sulfate in equilibrium with solid: (, exothermic). A student proposes three separate actions to increase the mass of precipitate: (1) Adding ; (2) Heating the solution from to ; (3) Adding of pure distilled water. (a) For each action, predict whether the mass of solid precipitate increases, decreases, or remains unchanged, citing Le Chatelier's principle and solubility rules. (b) Explain the counter-intuitive effect observed in action (2) compared to typical solid dissolutions.
Answer and steps
Final answer
(a) Action (1): Mass of solid increases due to the common-ion effect ( increases, shifting equilibrium left); Action (2): Mass of solid increases because dissolution is exothermic (heat acts as a product, so increasing temperature shifts equilibrium left); Action (3): Mass of solid decreases as additional solvent allows more solid to dissolve until saturation is restored; (b) Unlike most solids whose dissolution is endothermic, exhibits retrograde solubility (exothermic dissolution), meaning heating forces additional precipitation.
Steps
Part (a): Predicting the Effect of Each Action
The dissolution equilibrium and its thermochemical equation are:
The solubility product quotient is given by .
-
Action (1): Adding
- Effect on solid mass: Increases
- Basis: Sodium sulfate () is a highly soluble salt that dissociates completely into and . Adding it abruptly increases the concentration of the common ion, , causing . By Le Chatelier's principle, the system shifts to the left to consume the excess sulfate ions, precipitating additional .
-
Action (2): Heating the solution from to
- Effect on solid mass: Increases
- Basis: Because the dissolution process is exothermic (), heat can be treated as a product on the right side of the equilibrium expression. According to Le Chatelier's principle, increasing the temperature adds thermal energy to the system, driving the equilibrium in the endothermic direction (to the left) to absorb heat. As a result, decreases, and more precipitates out of solution.
-
Action (3): Adding of pure distilled water
- Effect on solid mass: Decreases
- Basis: Adding pure solvent increases the total solution volume, immediately diluting the dissolved ions and lowering both and . This causes the reaction quotient to drop below the solubility product constant (). In response, Le Chatelier's principle dictates a shift to the right (the forward direction), dissolving some of the existing solid until the solution becomes saturated again.
Part (b): Explanation of the Counter-Intuitive Temperature Effect
- Typical Solid Dissolutions: For the vast majority of ionic salts (such as or ), the lattice energy required to break apart the ionic crystal is greater than the hydration energy released when ions interact with water. Consequently, the dissolution is endothermic (), and heating increases solubility.
- Calcium Sulfate Behavior: For , the hydration of the small, highly charged divalent ions ( and ) releases an unusually large amount of hydration energy that exceeds the lattice energy. Thus, the overall dissolution is exothermic (). This results in retrograde solubility (solubility decreases as temperature rises). Heating the mixture drives the reverse reaction, causing additional solid to precipitate rather than dissolve.
Common Pitfall to Avoid
Do not assume that all solids dissolve more readily at elevated temperatures. Always verify the sign of before applying Le Chatelier's principle to temperature shifts.
Typical errors
01 The student misapplies Le Chatelier's principle to exothermic dissolution by assuming heating always increases solubility like typical solids, concluding that solid mass decreases in Action (2).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Action 1: Increases, common ion shifts equilibrium left.
- Step 2
Action 2: Decreases, heating provides energy that breaks the lattice and dissolves more solid.
CorrectAction 2: Increases solid mass because dissolution is exothermic (); heating shifts equilibrium in the endothermic direction (left).
Because the dissolution is exothermic (), heat acts as a product. By Le Chatelier's principle, raising the temperature drives the equilibrium to the left, which precipitates more rather than dissolving it.
- Step 3
Action 3: Decreases, adding water dilutes the ions so more solid dissolves.
- Step 4
Dissolving solids is generally favored at higher temperatures because thermal energy helps break the crystal lattice, so the solid dissolves instead of precipitating.
CorrectMost salts dissolve endothermically (), so heating increases solubility. In contrast, dissolves exothermically () due to large hydration energy, resulting in retrograde solubility where heating forces precipitation.
You described the general intuition for typical endothermic dissolutions, but the prompt asked you to explain why exhibits the opposite (counter-intuitive) behavior: its exothermic dissolution means its solubility decreases with increasing temperature (retrograde solubility).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied Le Chatelier's principle to the common-ion effect in Action 1.
You correctly predicted that dilution drives the equilibrium forward to dissolve more solid in Action 3.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou relied on everyday intuition about thermal energy breaking lattices rather than checking the explicitly stated sign of , which makes heat a product rather than a reactant.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Enthalpy Sign First
Dissolution can be endothermic (, heat is a reactant) or exothermic (, heat is a product).
Always look for the sign of before predicting the temperature effect on solubility.
- Apply Le Chatelier's Principle to Heat
Adding heat to an exothermic equilibrium () shifts the reaction to the left, decreasing solubility.
Treat heat explicitly as a product on the right side when .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the thermochemical equilibrium: since .
Apply Le Chatelier's principle for a temperature increase (): the system consumes added heat by shifting left.
Conclude that shifting left increases the mass of precipitate.
Explain Part (b): while most salts have (lattice energy exceeds hydration energy), has (hydration energy exceeds lattice energy), giving it retrograde solubility.
(a) Action 1: Increases; Action 2: Increases; Action 3: Decreases. (b) Typical salts dissolve endothermically, so heating dissolves more solid; dissolves exothermically (retrograde solubility), so heating drives precipitation.
02 The student confuses adding water to a saturated solution with shifting the reaction to the left, incorrectly believing that increasing total volume pushes more solid out of solution.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Increases, adding shifts equilibrium left.
- Step 2
- Increases, reaction is exothermic so heating shifts equilibrium left.
- Step 3
- Increases, adding water expands the volume and forces more precipitate to form.
CorrectAction (3): Mass of precipitate decreases. Adding water dilutes the dissolved ions, lowering and so that . The equilibrium shifts right to dissolve more solid until saturation is re-established.
Adding pure water increases the solvent volume and lowers ion concentrations. To restore equilibrium, solid must dissolve, reducing the precipitate mass.
- Step 4
Most solids have endothermic dissolution where solubility rises with temperature, but calcium sulfate is exothermic, so solubility decreases as temperature increases.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly predicted and justified the common-ion effect when sodium sulfate is added.
You correctly used the negative enthalpy of dissolution to deduce that heating favors precipitation.
You clearly contrasted retrograde solubility with standard endothermic solid dissolution.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated expanding solution volume as a stress that squeezes or forces solid out of solution, confusing solvent dilution with a gas-phase volume decrease. Adding solvent dilutes aqueous species (), which drives further dissolution of the undissolved solid.
REASONING PATH
Your ACEpath teacher’s suggested approach- Evaluate Ion Concentration via Dilution
Adding pure solvent increases total volume , which immediately reduces ion molarities: .
Calculate or compare the new concentrations immediately after solvent addition before the system shifts.
- Compare $Q_{sp}$ with $K_{sp}$
If and drop, then .
Recognize that requires the forward reaction (dissolution) to proceed, consuming solid precipitate until again.
CORRECTED PATH
ACEpath Teacher's DemonstrationAdding of water increases the volume of the solution without adding any solute ions.
The concentrations of and immediately decrease upon dilution.
Because and decrease, the reaction quotient becomes less than the equilibrium constant: .
By Le Chatelier's principle, the system responds by shifting in the forward direction (to the right) to restore ion concentrations, dissolving additional .
The mass of solid precipitate decreases.
03 The student forgets that Na2SO4 is completely soluble and dissociates to supply the common ion SO4²⁻, concluding that Action (1) has no effect on the equilibrium.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Remains unchanged, contains spectator ions that do not participate in the equilibrium.
CorrectMass of solid increases: soluble dissociates to increase , shifting equilibrium left via the common-ion effect.
You treated all ions in as spectator ions. Because is highly soluble, it fully dissociates into and . The added is a common ion that raises , driving the equilibrium to the left and increasing the mass of precipitate.
- Step 2
Increases, because , heat acts as a product and increasing temperature shifts equilibrium to the left.
- Step 3
Decreases, adding water dilutes the ions so more dissolves.
- Step 4
Most solid dissolutions are endothermic so solubility increases upon heating, but has an exothermic dissolution, meaning solubility decreases when heated.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied Le Chatelier's principle to temperature changes for an exothermic reaction.
You correctly recognized that dilution lowers ion concentrations and prompts further dissolution of the solid.
You provided a sound conceptual explanation distinguishing endothermic dissolution from retrograde solubility.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou classified the entire added salt as spectator ions rather than identifying that is identical to one of the constituent ions in the dissolution equilibrium.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Dissociated Ions
Soluble ionic compounds dissociate into separate cations and anions in water.
Always write out the dissociation equation of any added soluble salt to check whether either ion matches an ion in the equilibrium.
- Evaluate the Common-Ion Effect
Introducing an ion already present in a solubility equilibrium increases its concentration, shifting the position of equilibrium toward the solid precipitate.
When an added salt shares an ion with the precipitate, increase that ion's concentration in and shift the equilibrium to the left.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the dissociation of the added salt: .
Identify as an ion shared directly with .
Adding significantly increases , making .
By Le Chatelier's principle, the equilibrium shifts to the left to consume the excess sulfate.
Therefore, the mass of precipitate increases.
(a) Action (1): Mass of solid increases; Action (2): Mass of solid increases; Action (3): Mass of solid decreases. (b) Most solid dissolutions are endothermic and dissolve more when heated, but dissolves exothermically, so heating shifts the equilibrium toward the solid (retrograde solubility).
Lock it in
How does Le Chatelier's principle predict the effect of heating on a salt with an exothermic dissolution ()?
Solubility decreases and solid precipitates. Because heat is a product (), adding heat shifts equilibrium left.
Similar question
Cerium(III) sulfate, , has an exothermic heat of dissolution (). Predict whether the concentration of in a saturated solution in contact with solid will increase, decrease, or remain unchanged when the solution is heated from to . Justify using Le Chatelier's principle.
Answer
The concentration of decreases. For an exothermic dissolution, heat is a product: . Raising temperature shifts equilibrium left toward the solid, lowering dissolved ion concentrations.
A saturated solution of has . A student carries out two actions: (a) adding , and (b) raising the temperature. Predict whether the mass of precipitate increases or decreases in each case.
Answer
(a) Mass increases: adding common ion increases , shifting equilibrium left. (b) Mass decreases: because dissolution is endothermic (), adding heat shifts equilibrium right to absorb heat, dissolving more solid.
The dissolution of gas is exothermic (), while dissolution of is endothermic (). You warm an open beaker containing both a saturated solution of carbon dioxide and excess solid ammonium nitrate. Predict the phase change direction for each solute and explain using thermodynamic principles.
Answer
gas bubbles out of solution (decreased solubility), while additional dissolves (increased solubility). Warming drives exothermic equilibria in reverse (toward gaseous ) and drives endothermic equilibria forward (toward aqueous and ions).