Resources

In an analytical chemistry laboratory, a student standardizes a solution of nickel(II) via complexometric titration with the hexadentate Lewis base ligand EDTA4−\text{EDTA}^{4-}. A 25.00 mL25.00\text{ mL} aliquot of an unknown Ni2+\text{Ni}^{2+} solution buffered at pH=10.0\text{pH} = 10.0 requires 18.45 mL18.45\text{ mL} of 0.01500 M0.01500\text{ M} disodium EDTA solution to reach the murexide indicator endpoint. (a) Write the net balanced Lewis coordination reaction between the hydrated Ni2+\text{Ni}^{2+} Lewis acid and the unprotonated EDTA4−\text{EDTA}^{4-} Lewis base. (b) Calculate the molar concentration of Ni2+\text{Ni}^{2+} in the original aliquot to four significant figures. (c) Explain why multidentate Lewis bases (chelating agents) yield much sharper titration endpoints than equivalent concentrations of monodentate Lewis bases like NH3\text{NH}_3.

Answer and steps

Final answer

(a) [Ni(H2O)6]2++EDTA4−⇌[Ni(EDTA)]2−+6 H2O[\text{Ni}(\text{H}_2\text{O})_6]^{2+} + \text{EDTA}^{4-} \rightleftharpoons [\text{Ni}(\text{EDTA})]^{2-} + 6\,\text{H}_2\text{O}; (b) [Ni2+]=(0.01500 M)×(18.45 mL)25.00 mL=0.01107 M[\text{Ni}^{2+}] = \frac{(0.01500\text{ M}) \times (18.45\text{ mL})}{25.00\text{ mL}} = 0.01107\text{ M}; (c) Chelating agents exhibit the chelate effect: binding one hexadentate ligand releases six bound monodentate water molecules, leading to a large favorable positive change in entropy (ΔS∘>0\Delta S^\circ > 0), resulting in a formation constant (KfK_f) that is several orders of magnitude higher and a stoichiometric 1:11:1 equivalence point with a steep, sharp potential drop.

Steps

Part (a): Net Balanced Lewis Coordination Reaction

According to the Lewis acid–base definition:

  • A Lewis acid is an electron-pair acceptor (here, the central metal ion NiX2+\ce{Ni^{2+}}, which in aqueous solution exists predominantly as the octahedral hexaaqua complex [Ni(HX2O)X6]2+[\ce{Ni(H2O)6}]^{2+}).
  • A Lewis base is an electron-pair donor (the hexadentate ligand EDTAX4−\ce{EDTA^{4-}}, which donates six pairs of electrons through two amine nitrogens and four carboxylate oxygens).

When EDTAX4−\ce{EDTA^{4-}} binds to the nickel(II) ion, it displaces the six coordinated water molecules to form a stable 1:11:1 chelate complex:

[Ni(HX2O)X6]2++EDTAX4−⇌[Ni(EDTA)]2−+6 HX2O[\ce{Ni(H2O)6}]^{2+} + \ce{EDTA^{4-}} \rightleftharpoons [\ce{Ni(EDTA)}]^{2-} + 6\,\ce{H2O}


Part (b): Molar Concentration of NiX2+\ce{Ni^{2+}}

Because EDTAX4−\ce{EDTA^{4-}} binds to metal ions in a strict 1:11:1 stoichiometric ratio regardless of the metal ion's charge:

moles of NiX2+=moles of EDTAX4−\text{moles of }\ce{Ni^{2+}} = \text{moles of }\ce{EDTA^{4-}}

  1. Calculate the moles of EDTAX4−\ce{EDTA^{4-}} delivered at the endpoint: Moles of EDTAX4−=MEDTA×VEDTA=(0.01500 M)×(18.45 mL)=0.27675 mmol\text{Moles of }\ce{EDTA^{4-}} = M_{\ce{EDTA}} \times V_{\ce{EDTA}} = (0.01500\text{ M}) \times (18.45\text{ mL}) = 0.27675\text{ mmol}
  2. Calculate the concentration of the original NiX2+\ce{Ni^{2+}} solution: [NiX2+]=moles of NiX2+Valiquot=(0.01500 M)×(18.45 mL)25.00 mL=0.01107 M[\ce{Ni^{2+}}] = \frac{\text{moles of }\ce{Ni^{2+}}}{V_{\text{aliquot}}} = \frac{(0.01500\text{ M}) \times (18.45\text{ mL})}{25.00\text{ mL}} = 0.01107\text{ M}

Significant Figures Pitfall: The given volume 18.45 mL18.45\text{ mL} and concentration 0.01500 M0.01500\text{ M} each have four significant figures, and 25.00 mL25.00\text{ mL} has four significant figures. Thus, the final concentration is reported to four significant figures: 0.01107 M0.01107\text{ M}.


Part (c): Chelate Effect and Titration Sharpness

Multidentate ligands produce much sharper titration endpoints than monodentate ligands (such as NHX3\ce{NH3}) due to two key factors:

  1. The Chelate Effect (Thermodynamic Stability):

    • Replacing six independent monodentate HX2O\ce{H2O} ligands with a single hexadentate EDTAX4−\ce{EDTA^{4-}} ligand increases the total number of free species from two on the reactant side (1 complex+1 ligand1\text{ complex} + 1\text{ ligand}) to seven on the product side (1 chelate+6 water molecules1\text{ chelate} + 6\text{ water molecules}).
    • This net increase in independent particles creates a large, favorable increase in entropy (ΔS∘>0\Delta S^\circ > 0), making the overall Gibbs free energy change (ΔG∘=ΔH∘−TΔS∘\Delta G^\circ = \Delta H^\circ - T\Delta S^\circ) highly negative.
    • Consequently, the formation constant (KfK_f) for [Ni(EDTA)]2−[\ce{Ni(EDTA)}]^{2-} is extremely large (≈1018\approx 10^{18}), driving the reaction essentially to completion.
  2. Stoichiometric Stepwise Equivalence:

    • Monodentate ligands like NHX3\ce{NH3} bind to NiX2+\ce{Ni^{2+}} in six successive, stepwise equilibria (K1,K2,…,K6K_1, K_2, \dots, K_6) that overlap in solution, which smears out the free metal ion concentration drop over a broad volume range.
    • In contrast, a chelating agent forms a single-step 1:11:1 complex, leading to an abrupt, precipitous drop in free [NiX2+][\ce{Ni^{2+}}] (a steep jump in pNi\text{pNi}) right at the equivalence point, giving a sharp, well-defined indicator transition.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the hexadentate nature of EDTA as requiring a 1:6 metal-to-ligand stoichiometric ratio rather than a 1:1 complex, leading to an incorrect molarity calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ni2++6 EDTA4−→[Ni(EDTA)6]22−\text{Ni}^{2+} + 6\,\text{EDTA}^{4-} \rightarrow [\text{Ni}(\text{EDTA})_6]^{22-}

    Correct

    [Ni(H2O)6]2++EDTA4−⇌[Ni(EDTA)]2−+6 H2O[\text{Ni}(\text{H}_2\text{O})_6]^{2+} + \text{EDTA}^{4-} \rightleftharpoons [\text{Ni}(\text{EDTA})]^{2-} + 6\,\text{H}_2\text{O}

    A hexadentate ligand possesses six Lewis base donor atoms on a single molecule, allowing one EDTA4−\text{EDTA}^{4-} molecule to completely wrap around and satisfy the six coordination sites of one Ni2+\text{Ni}^{2+} ion in a 1:11:1 stoichiometric ratio.

  2. Step 2

    Moles of EDTA=0.01500 M×0.01845 L=2.7675×10−4 mol\text{Moles of EDTA} = 0.01500\text{ M} \times 0.01845\text{ L} = 2.7675 \times 10^{-4}\text{ mol}

  3. Step 3

    Moles of Ni2+=2.7675×10−4 mol6=4.6125×10−5 mol  ⟹  [Ni2+]=4.6125×10−5 mol0.02500 L=0.001845 M\text{Moles of Ni}^{2+} = \frac{2.7675 \times 10^{-4}\text{ mol}}{6} = 4.6125 \times 10^{-5}\text{ mol} \implies [\text{Ni}^{2+}] = \frac{4.6125 \times 10^{-5}\text{ mol}}{0.02500\text{ L}} = 0.001845\text{ M}

    Correct

    Moles of Ni2+=2.7675×10−4 mol  ⟹  [Ni2+]=2.7675×10−4 mol0.02500 L=0.01107 M\text{Moles of Ni}^{2+} = 2.7675 \times 10^{-4}\text{ mol} \implies [\text{Ni}^{2+}] = \frac{2.7675 \times 10^{-4}\text{ mol}}{0.02500\text{ L}} = 0.01107\text{ M}

    Your dilution calculation was mathematically correct, but dividing by 66 was a downstream error propagated from the incorrect 1:61:6 stoichiometric ratio in part (a).

  4. Step 4

    Chelate complexes form much more stable complexes due to the chelate effect (entropy increase) and react in a single step with a huge formation constant, whereas monodentate ligands bind stepwise across multiple equilibria.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of titrant delivered at the endpoint.

You correctly identified that the chelate effect is driven by an increase in entropy and produces a very large formation constant.

You correctly contrasted the sharp single-step titration curve of a multidentate chelator with the broad stepwise equilibria of monodentate ligands.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denticity vs. Stoichiometry Confusion

You equated 'hexadentate' to a stoichiometric coefficient of 66 in the reaction equation instead of recognizing that six donor atoms exist within a single ligand molecule.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the denticity of a multidentate Lewis base with its reaction stoichiometry. In coordination chemistry, denticity specifies the number of electron-pair donor atoms attached to a single ligand molecule, not the number of ligand molecules required to bind the metal center.

REASONING PATH
Your ACEpath teacher’s suggested approach
Denticity vs. Stoichiometry
  • Denticity (nn-dentate) represents donor atoms per ligand molecule; EDTA is hexadentate, so one ligand binds all six octahedral coordination sites.

  • Always write EDTA complexation reactions with a strict 1:11:1 metal-to-ligand ratio ([M(H2O)6]n++EDTA4−⇌[M(EDTA)](n−4)++6 H2O[\text{M}(\text{H}_2\text{O})_6]^{n+} + \text{EDTA}^{4-} \rightleftharpoons [\text{M}(\text{EDTA})]^{(n-4)+} + 6\,\text{H}_2\text{O}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the 1:11:1 equivalence condition: moles of Ni2+=moles of EDTA4−=2.7675×10−4 mol\text{moles of }\text{Ni}^{2+} = \text{moles of }\text{EDTA}^{4-} = 2.7675 \times 10^{-4}\text{ mol}.

  2. Divide by the aliquot volume: [Ni2+]=2.7675×10−4 mol0.02500 L=0.01107 M[\text{Ni}^{2+}] = \frac{2.7675 \times 10^{-4}\text{ mol}}{0.02500\text{ L}} = 0.01107\text{ M}.

Final answer

(a) [Ni(H2O)6]2++EDTA4−⇌[Ni(EDTA)]2−+6 H2O[\text{Ni}(\text{H}_2\text{O})_6]^{2+} + \text{EDTA}^{4-} \rightleftharpoons [\text{Ni}(\text{EDTA})]^{2-} + 6\,\text{H}_2\text{O}; (b) [Ni2+]=0.01107 M[\text{Ni}^{2+}] = 0.01107\text{ M}; (c) Multidentate ligands form 1:11:1 complexes with very large KfK_f driven by favorable entropy ( ΔS∘>0\,\Delta S^\circ > 0), resulting in a single steep drop in free [Ni2+][\text{Ni}^{2+}] rather than overlapping stepwise equilibria.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definitions of denticity (monodentate, bidentate, hexadentate) and practice drawing how a single EDTA molecule wraps around an octahedral metal cation.

  • Remember that regardless of metal cation charge (+1,+2,+3,+4+1, +2, +3, +4), EDTA almost universally coordinates as a single 1:11:1 complex in analytical titrations.

OverviewACEpath Teacher's Diagnosis

02 The student confuses enthalpy and entropy in the thermodynamic origin of the chelate effect, incorrectly claiming that stronger coordination bond enthalpies drive the sharper endpoint break.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NiX2++EDTAX4−→[Ni(EDTA)]X2−\ce{Ni^{2+} + EDTA^{4-} -> [Ni(EDTA)]^{2-}}

    Correct

    [Ni(HX2O)X6]2++EDTAX4−⇌[Ni(EDTA)]2−+6 HX2O[\ce{Ni(H2O)6}]^{2+} + \ce{EDTA^{4-}} \rightleftharpoons [\ce{Ni(EDTA)}]^{2-} + 6\,\ce{H2O}

    The prompt specified the reaction of the hydrated nickel(II) ion. Aqueous nickel(II) exists as the octahedral hexaaqua complex [Ni(HX2O)X6]2+[\ce{Ni(H2O)6}]^{2+}, and binding hexadentate EDTAX4−\ce{EDTA^{4-}} displaces all six coordinated water molecules into solution.

  2. Step 2

    Moles of EDTA=0.01500 M×0.01845 L=2.7675×10−4 mol  ⟹  Moles of Ni2+=2.7675×10−4 mol  ⟹  [NiX2+]=2.7675×10−4 mol0.02500 L=0.01107 M\text{Moles of EDTA} = 0.01500\text{ M} \times 0.01845\text{ L} = 2.7675 \times 10^{-4}\text{ mol} \implies \text{Moles of Ni}^{2+} = 2.7675 \times 10^{-4}\text{ mol} \implies [\ce{Ni^{2+}}] = \frac{2.7675 \times 10^{-4}\text{ mol}}{0.02500\text{ L}} = 0.01107\text{ M}

  3. Step 3

    Chelating agents produce endpoints because multidentate donor atoms form much stronger coordinate covalent bonds with a highly exothermic enthalpy of reaction, which makes the complex formation constant much larger than monodentate ligands.

    Correct

    Chelating agents exhibit the chelate effect primarily driven by entropy (ΔS∘>0\Delta S^\circ > 0): displacing six bound monodentate water molecules with one hexadentate EDTAX4−\ce{EDTA^{4-}} increases the total number of free particles from 2 to 7, yielding a massive formation constant (KfK_f). Furthermore, chelates bind in a single 1:11:1 step, avoiding the smeared, overlapping stepwise equilibria (K1K_1 through K6K_6) seen with monodentate ligands like NHX3\ce{NH3}.

    The enthalpy change (ΔH∘\Delta H^\circ) for forming metal–nitrogen and metal–oxygen bonds in chelates is often very similar to that of analogous monodentate complexes. The dramatic stability enhancement and sharp titration break arise from a large favorable increase in entropy (ΔS∘>0\Delta S^\circ > 0) due to net particle generation, combined with a single-step 1:11:1 equilibrium.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the 1:11:1 stoichiometric equivalence between NiX2+\ce{Ni^{2+}} and EDTAX4−\ce{EDTA^{4-}}.

You performed the volumetric concentration calculation accurately and maintained four significant figures throughout.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Chelate effect thermodynamics: enthalpy vs. entropy misconception

You represented the hydrated cation as bare NiX2+\ce{Ni^{2+}} instead of explicitly showing [Ni(HX2O)X6]2+[\ce{Ni(H2O)6}]^{2+} and the released water molecules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the thermodynamic stability of chelates stems from significantly stronger coordinate covalent bond enthalpies, overlooking that the chelate effect is primarily an entropic phenomenon resulting from the net release of coordinated solvent molecules.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Driver of Chelates
  • ΔG∘=ΔH∘−TΔS∘\Delta G^\circ = \Delta H^\circ - T\Delta S^\circ. The chelate effect is predominantly entropy-driven (ΔS∘≫0\Delta S^\circ \gg 0) because multiple bound monodentate solvent molecules are released into solution by a single multidentate ligand.

  • Always count the change in the total number of independent solute particles on both sides of the ligand displacement reaction.

Titration Sharpness: Single-step vs. Stepwise
  • Monodentate ligands form complexes across multiple overlapping stepwise equilibria (K1,K2,…K_1, K_2, \dots), blurring the equivalence point. Chelating agents bind in a single 1:11:1 step with an enormous KfK_f, causing a steep, instantaneous drop in free metal ion concentration.

  • Cite both the high formation constant (KfK_f) from the entropy gain and the absence of intermediate stepwise complexes when explaining titration curve sharpness.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the particle count change: [Ni(HX2O)X6]2++EDTAX4−⇌[Ni(EDTA)]2−+6 HX2O[\ce{Ni(H2O)6}]^{2+} + \ce{EDTA^{4-}} \rightleftharpoons [\ce{Ni(EDTA)}]^{2-} + 6\,\ce{H2O} converts 2 reactant particles into 7 product particles.

  2. Relate particle increase to entropy: A net increase of +5+5 free particles leads to a large positive entropy change (ΔS∘>0\Delta S^\circ > 0), making ΔG∘\Delta G^\circ heavily negative and Kf≈1018K_f \approx 10^{18}.

  3. Contrast titration curves: Monodentate ligands like NHX3\ce{NH3} undergo six sequential, overlapping equilibria (K1K_1 through K6K_6), producing a gradual slope. In contrast, EDTAX4−\ce{EDTA^{4-}} reacts in a single 1:11:1 step with an immense KfK_f, yielding an abrupt jump in pNi\text{pNi} at equivalence.

Final answer

(a) [Ni(HX2O)X6]2++EDTAX4−⇌[Ni(EDTA)]2−+6 HX2O[\ce{Ni(H2O)6}]^{2+} + \ce{EDTA^{4-}} \rightleftharpoons [\ce{Ni(EDTA)}]^{2-} + 6\,\ce{H2O}; (b) [NiX2+]=0.01107 M[\ce{Ni^{2+}}] = 0.01107\text{ M}; (c) The chelate effect is driven by a large positive entropy change (ΔS∘>0\Delta S^\circ > 0) from releasing six bound HX2O\ce{H2O} molecules, yielding an enormous KfK_f and a single-step 1:11:1 reaction that produces a sharp equivalence potential drop.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing ligand displacement equations explicitly including the coordinated water ligands to visualize particle changes.

  • Review the distinction between coordinate bond enthalpy (ΔH∘\Delta H^\circ) and ligand displacement translational entropy (ΔS∘\Delta S^\circ).

  • Compare titration curves of NiX2+\ce{Ni^{2+}} with NHX3\ce{NH3} versus EDTAX4−\ce{EDTA^{4-}} to connect stepwise formation constants with curve inflection.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the dilution formula when calculating molarity, dividing the original aliquot volume by the moles of Ni²⁺ rather than dividing moles by volume.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ni2++EDTA4−⟶[Ni(EDTA)]2−\text{Ni}^{2+} + \text{EDTA}^{4-} \longrightarrow [\text{Ni}(\text{EDTA})]^{2-}

    Correct

    [Ni(H2O)6]2++EDTA4−⇌[Ni(EDTA)]2−+6 H2O[\text{Ni}(\text{H}_2\text{O})_6]^{2+} + \text{EDTA}^{4-} \rightleftharpoons [\text{Ni}(\text{EDTA})]^{2-} + 6\,\text{H}_2\text{O}

    The problem specifically asks for the reaction involving the hydrated Ni2+\text{Ni}^{2+} Lewis acid. In aqueous solution, nickel(II) exists as the octahedral hexaaqua complex [Ni(H2O)6]2+[\text{Ni}(\text{H}_2\text{O})_6]^{2+}; binding of the hexadentate EDTA4−\text{EDTA}^{4-} ligand displaces all six coordinated water molecules into solution.

  2. Step 2

    Moles of EDTA=0.01500 M×0.01845 L=2.7675×10−4 mol  ⟹  Moles of Ni2+=2.7675×10−4 mol\text{Moles of EDTA} = 0.01500\text{ M} \times 0.01845\text{ L} = 2.7675 \times 10^{-4}\text{ mol} \implies \text{Moles of Ni}^{2+} = 2.7675 \times 10^{-4}\text{ mol}

  3. Step 3

    [Ni2+]=0.02500 L(2.7675×10−4 mol)=90.33 M[\text{Ni}^{2+}] = \frac{0.02500\text{ L}}{(2.7675 \times 10^{-4}\text{ mol})} = 90.33\text{ M}

    Correct

    [Ni2+]=nNi2+Valiquot=2.7675×10−4 mol0.02500 L=0.01107 M[\text{Ni}^{2+}] = \frac{n_{\text{Ni}^{2+}}}{V_{\text{aliquot}}} = \frac{2.7675 \times 10^{-4}\text{ mol}}{0.02500\text{ L}} = 0.01107\text{ M}

    You inverted the definition of molar concentration by dividing volume by moles (L/mol\text{L}/\text{mol}) rather than moles by volume (mol/L\text{mol}/\text{L}). Dividing moles by liters gives [Ni2+]=0.01107 M[\text{Ni}^{2+}] = 0.01107\text{ M} to four significant figures.

  4. Step 4

    EDTA binds metal ions in a single 1:1 reaction with an extremely high formation constant due to favorable entropy, yielding a steep jump at equivalence, while monodentate ligands add stepwise through low-K equilibria producing a broad, smeared curve.\text{EDTA binds metal ions in a single 1:1 reaction with an extremely high formation constant due to favorable entropy, yielding a steep jump at equivalence, while monodentate ligands add stepwise through low-K equilibria producing a broad, smeared curve.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total moles of titrant delivered at the endpoint.

You recognized the 1:11:1 stoichiometric coordination ratio between Ni2+\text{Ni}^{2+} and EDTA4−\text{EDTA}^{4-}.

You clearly explained the thermodynamic and kinetic advantages of multidentate chelation over stepwise monodentate coordination.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Molarity Formula

You divided the volume of the aliquot by the amount in moles instead of dividing moles by volume.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the numerator and denominator in the concentration definition M=nVM = \frac{n}{V}, leading to an impossible aqueous concentration (90.33 M90.33\text{ M}) with units of L/mol\text{L}/\text{mol} instead of mol/L\text{mol}/\text{L}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity Definition
  • Molarity is defined as moles of solute per liter of solution: M=nVM = \frac{n}{V}.

  • Always verify your units before calculating: mol÷L=M\text{mol} \div \text{L} = \text{M}.

Aqueous Concentration Reality Check
  • Typical aqueous laboratory solutions range from 10−4 M10^{-4}\text{ M} to roughly 18 M18\text{ M} (pure water is ≈55.5 M\approx 55.5\text{ M}).

  • If an analytical solution concentration exceeds ≈18 M\approx 18\text{ M}, check immediately whether you accidentally inverted the concentration formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the fundamental definition of molarity: M=nVM = \frac{n}{V}.

  2. Substitute n=2.7675×10−4 moln = 2.7675 \times 10^{-4}\text{ mol} and V=0.02500 LV = 0.02500\text{ L}: [Ni2+]=2.7675×10−4 mol0.02500 L[\text{Ni}^{2+}] = \frac{2.7675 \times 10^{-4}\text{ mol}}{0.02500\text{ L}}.

  3. Evaluate the quotient and round to four significant figures: [Ni2+]=0.01107 M[\text{Ni}^{2+}] = 0.01107\text{ M}.

Final answer

(a) [Ni(H2O)6]2++EDTA4−⇌[Ni(EDTA)]2−+6 H2O[\text{Ni}(\text{H}_2\text{O})_6]^{2+} + \text{EDTA}^{4-} \rightleftharpoons [\text{Ni}(\text{EDTA})]^{2-} + 6\,\text{H}_2\text{O}; (b) [Ni2+]=0.01107 M[\text{Ni}^{2+}] = 0.01107\text{ M}; (c) Chelation releases six coordinated water molecules, increasing entropy (ΔS∘>0\Delta S^\circ > 0) and yielding an extremely large KfK_f in a single 1:11:1 step, which produces an abrupt, steep potential jump at equivalence compared to broad, overlapping stepwise monodentate equilibria.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the units explicitly next to every calculation step to ensure your answer has units of mol/L\text{mol}/\text{L}.

  • In Lewis coordination reactions in aqueous solution, always represent the initial transition metal cation as its hexaaqua complex [M(H2O)6]n+[\text{M}(\text{H}_2\text{O})_6]^{n+} to account for displaced water ligands.

Lock it in

Similar question

01

A 50.00 mL50.00\text{ mL} water sample containing Ca2+\text{Ca}^{2+} is titrated at pH=12\text{pH} = 12 with 0.0100 M0.0100\text{ M} EDTA. The endpoint requires 14.20 mL14.20\text{ mL} of titrant. Calculate the molar concentration of Ca2+\text{Ca}^{2+} in the water sample.

Answer

Using the 1:11:1 stoichiometry Ca2++EDTA4−→[Ca(EDTA)]2−\text{Ca}^{2+} + \text{EDTA}^{4-} \rightarrow [\text{Ca}(\text{EDTA})]^{2-}: Moles of Ca2+=(0.0100 M)(0.01420 L)=1.42×10−4 mol\text{Moles of }\text{Ca}^{2+} = (0.0100\text{ M})(0.01420\text{ L}) = 1.42 \times 10^{-4}\text{ mol}. [Ca2+]=1.42×10−4 mol0.05000 L=2.84×10−3 M[\text{Ca}^{2+}] = \frac{1.42 \times 10^{-4}\text{ mol}}{0.05000\text{ L}} = 2.84 \times 10^{-3}\text{ M}.

02

Ethylenediamine (en) is a bidentate Lewis base ligand. Write the balanced equation for the complete substitution of water ligands in [Co(H2O)6]3+[\text{Co}(\text{H}_2\text{O})_6]^{3+} by ethylenediamine, and state the metal-to-ligand stoichiometric ratio.

Answer

[Co(H2O)6]3++3 en⇌[Co(en)3]3++6 H2O[\text{Co}(\text{H}_2\text{O})_6]^{3+} + 3\,\text{en} \rightleftharpoons [\text{Co}(\text{en})_3]^{3+} + 6\,\text{H}_2\text{O}. Because 'en' is bidentate (2 donor atoms per ligand), 33 ligands provide the 66 coordinate bonds, giving a 1:31:3 metal-to-ligand ratio.

03

A 20.00 mL20.00\text{ mL} solution containing a mixture of Bi3+\text{Bi}^{3+} and Pb2+\text{Pb}^{2+} is titrated with 0.0200 M0.0200\text{ M} EDTA. At pH=2.0\text{pH} = 2.0, only Bi3+\text{Bi}^{3+} reacts, requiring 12.50 mL12.50\text{ mL} of EDTA. The solution is then buffered to pH=5.0\text{pH} = 5.0, and an additional 18.20 mL18.20\text{ mL} of EDTA is required to reach the second endpoint for Pb2+\text{Pb}^{2+}. Calculate the molar concentration of each metal cation in the original sample.

Answer

Both metals react in a 1:11:1 ratio with EDTA:

  1. For Bi3+\text{Bi}^{3+}: moles=(0.0200 M)(0.01250 L)=2.50×10−4 mol\text{moles} = (0.0200\text{ M})(0.01250\text{ L}) = 2.50 \times 10^{-4}\text{ mol}; [Bi3+]=2.50×10−4 mol0.02000 L=0.0125 M[\text{Bi}^{3+}] = \frac{2.50 \times 10^{-4}\text{ mol}}{0.02000\text{ L}} = 0.0125\text{ M}.
  2. For Pb2+\text{Pb}^{2+}: moles=(0.0200 M)(0.01820 L)=3.64×10−4 mol\text{moles} = (0.0200\text{ M})(0.01820\text{ L}) = 3.64 \times 10^{-4}\text{ mol}; [Pb2+]=3.64×10−4 mol0.02000 L=0.0182 M[\text{Pb}^{2+}] = \frac{3.64 \times 10^{-4}\text{ mol}}{0.02000\text{ L}} = 0.0182\text{ M}.
Loading workspace…