Resources

Consider the vaporization of a trace aerosol droplet of water at 100.0∘C100.0^\circ\text{C} with a mass of only 2.50×10−6 g2.50\times 10^{-6}\text{ g} (ΔHvap=40.7 kJ/mol\Delta H_{\text{vap}} = 40.7\text{ kJ/mol}, molar mass M=18.02 g/molM = 18.02\text{ g/mol}). Determine the heat absorbed in nanojoules (1 nJ=10−9 J1\text{ nJ} = 10^{-9}\text{ J}), and compute the number of water molecules that vaporize.

Answer and steps

Final answer

q=5.65×103 nJq = 5.65\times 10^3\text{ nJ}, N=8.35×1016 moleculesN = 8.35\times 10^{16}\text{ molecules}

Steps

01

Find the Amount of Water in Moles

Use the mass of the aerosol droplet mm and the molar mass of water MM to calculate the number of moles (nn):

n=mM=2.50×10−6 g18.02 g/mol≈1.387×10−7 moln = \frac{m}{M} = \frac{2.50\times 10^{-6}\text{ g}}{18.02\text{ g/mol}} \approx 1.387\times 10^{-7}\text{ mol}


02

Calculate the Number of Vaporized Water Molecules

Multiply the number of moles by Avogadro's constant (NA=6.022×1023 molecules/molN_{\text{A}} = 6.022\times 10^{23}\text{ molecules/mol}):

N=n⋅NA=(1.387×10−7 mol)⋅(6.022×1023 molecules/mol)≈8.35×1016 moleculesN = n \cdot N_{\text{A}} = (1.387\times 10^{-7}\text{ mol})\cdot (6.022\times 10^{23}\text{ molecules/mol}) \approx 8.35\times 10^{16}\text{ molecules}


03

Compute the Heat Absorbed (qq) in Nanojoules

Using the enthalpy of vaporization to find the energy required for the phase change:

q=n⋅ΔHvap=(1.387×10−7 mol)⋅(40.7)=5.65×10−6 Jq = n \cdot \Delta H_{\text{vap}} = (1.387\times 10^{-7}\text{ mol})\cdot (40.7) = 5.65\times 10^{-6}\text{ J}

To convert joules to nanojoules, divide by the conversion factor 1 nJ=10−9 J1\text{ nJ} = 10^{-9}\text{ J}:

q=5.65×10−6 J10−9 J/nJ=5.65×103 nJq = \frac{5.65\times 10^{-6}\text{ J}}{10^{-9}\text{ J/nJ}} = 5.65\times 10^3\text{ nJ}

Key Pitfall to Avoid: When converting between metric unit prefixes (such as nanojoules, 10−9 J10^{-9}\text{ J}), keep track of whether you are multiplying or dividing by the power of ten so that smaller unit measurements correspond to a larger numerical magnitude.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misapplies the prefix conversion between joules and nanojoules by multiplying by 10⁻⁹ instead of dividing by 10⁻⁹, resulting in 5.65 × 10⁻¹² nJ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=2.50×10−6 g18.02 g/mol=1.387×10−7 moln = \frac{2.50\times 10^{-6}\text{ g}}{18.02\text{ g/mol}} = 1.387\times 10^{-7}\text{ mol}

  2. Step 2

    q=1.387×10−7 mol⋅40.7 kJ/mol=5.645×10−6 kJ=5.65×10−3 Jq = 1.387\times 10^{-7}\text{ mol} \cdot 40.7\text{ kJ/mol} = 5.645\times 10^{-6}\text{ kJ} = 5.65\times 10^{-3}\text{ J}

  3. Step 3

    q=5.65×10−3⋅10−9=5.65×10−12 nJq = 5.65\times 10^{-3} \cdot 10^{-9} = 5.65\times 10^{-12}\text{ nJ}

    Correct

    q=5.65×10−3 J×1 nJ10−9 J=5.65×106 nJq = 5.65\times 10^{-3}\text{ J} \times \frac{1\text{ nJ}}{10^{-9}\text{ J}} = 5.65\times 10^6\text{ nJ}

    You multiplied by the prefix factor 10−910^{-9} instead of dividing by it. Because 1 nJ=10−9 J1\text{ nJ} = 10^{-9}\text{ J}, there are 109 nJ10^9\text{ nJ} in every 1 J1\text{ J}, so converting to a smaller unit must yield a larger numerical value.

  4. Step 4

    N=1.387×10−7 mol⋅6.022×1023 molecules/mol=8.35×1016 moleculesN = 1.387\times 10^{-7}\text{ mol} \cdot 6.022\times 10^{23}\text{ molecules/mol} = 8.35\times 10^{16}\text{ molecules}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of water from the droplet mass and molar mass.

You correctly calculated the heat of vaporization and accurately converted kilojoules to joules.

You correctly calculated the number of molecules using Avogadro's number.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Metric Prefix Conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You multiplied by the metric power factor (10−910^{-9}) rather than setting up a dimensional analysis ratio with units cancelling, which inverted the relationship between joules and nanojoules.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Size vs. Numerical Value
  • When converting from a larger base unit (J) to a smaller sub-unit (nJ), the numerical value must increase.

  • Check that the exponent becomes more positive when converting to smaller prefixed units like nano- or micro-.

Dimensional Analysis
  • Multiply by a conversion factor where the starting unit is in the denominator: 1 nJ10−9 J\frac{1\text{ nJ}}{10^{-9}\text{ J}}.

  • Write out the units explicitly and cancel the joules: 5.65×10−3 J×1 nJ10−9 J=5.65×106 nJ5.65\times 10^{-3}\text{ J} \times \frac{1\text{ nJ}}{10^{-9}\text{ J}} = 5.65\times 10^6\text{ nJ}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the dimensional analysis ratio using 1 nJ=10−9 J1\text{ nJ} = 10^{-9}\text{ J}: q=5.65×10−3 J×1 nJ10−9 Jq = 5.65\times 10^{-3}\text{ J} \times \frac{1\text{ nJ}}{10^{-9}\text{ J}}.

  2. Simplify the powers of ten: 10−310−9=10−3−(−9)=106\frac{10^{-3}}{10^{-9}} = 10^{-3 - (-9)} = 10^6.

  3. Combine with the coefficient to obtain q=5.65×106 nJq = 5.65\times 10^6\text{ nJ}.

Final answer

q=5.65×106 nJq = 5.65\times 10^6\text{ nJ}, N=8.35×1016 moleculesN = 8.35\times 10^{16}\text{ molecules}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write metric conversions as fractions with matching units in numerator and denominator so units cancel visibly.

  • Perform a quick magnitude sanity check: a nanojoule is tiny, so a given amount of energy must contain many nanojoules, not a fraction of one.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert kilojoules to joules when calculating the heat absorbed, obtaining 5.65 × 10³ nJ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=2.50×10−6 g18.02 g/mol=1.387×10−7 moln = \frac{2.50 \times 10^{-6}\text{ g}}{18.02\text{ g/mol}} = 1.387 \times 10^{-7}\text{ mol}

  2. Step 2

    q=1.387×10−7 mol⋅40.7=5.65×10−6 Jq = 1.387 \times 10^{-7}\text{ mol} \cdot 40.7 = 5.65 \times 10^{-6}\text{ J}

    Correct

    q=n⋅ΔHvap=(1.387×10−7 mol)(40.7×103 J/mol)=5.65×10−3 Jq = n \cdot \Delta H_{\text{vap}} = (1.387 \times 10^{-7}\text{ mol})(40.7 \times 10^3\text{ J/mol}) = 5.65 \times 10^{-3}\text{ J}

    You multiplied the moles by 40.740.7 without converting kJ/mol\text{kJ/mol} into J/mol\text{J/mol}, but labeled the resulting energy in joules instead of kilojoules.

  3. Step 3

    q=5.65×10−610−9=5.65×103 nJq = \frac{5.65 \times 10^{-6}}{10^{-9}} = 5.65 \times 10^3\text{ nJ}

    Correct

    q=5.65×10−3 J10−9 J/nJ=5.65×106 nJq = \frac{5.65 \times 10^{-3}\text{ J}}{10^{-9}\text{ J/nJ}} = 5.65 \times 10^6\text{ nJ}

    You set up the conversion from joules to nanojoules correctly by dividing by 10−910^{-9}, but your result carries forward the missing factor of 10310^3 from Step 2.

  4. Step 4

    N=1.387×10−7 mol⋅6.022×1023 molecules/mol=8.35×1016 moleculesN = 1.387 \times 10^{-7}\text{ mol} \cdot 6.022 \times 10^{23}\text{ molecules/mol} = 8.35 \times 10^{16}\text{ molecules}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the molar mass of water to calculate the moles of the aerosol droplet.

You accurately multiplied the moles by Avogadro's constant to determine the molecule count.

You used the correct relationship between joules and nanojoules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric Prefix Omission

You treated an enthalpy value given in kJ/mol\text{kJ/mol} as if it were in J/mol\text{J/mol}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Dropping explicit units during calculation steps often leads to overlooking prefix multipliers like kilo- (10310^3) before downstream unit conversions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Always Write Units with Numbers
  • Enthalpies of phase change are almost always reported in kJ/mol\text{kJ/mol}, where 1 kJ=103 J1\text{ kJ} = 10^3\text{ J}.

  • Write 40.7 kJ/mol=40.7×103 J/mol40.7\text{ kJ/mol} = 40.7 \times 10^3\text{ J/mol} before multiplying by the number of moles.

Match Units Across Conversions
  • A conversion factor defined in base units (1 nJ=10−9 J1\text{ nJ} = 10^{-9}\text{ J}) requires the input quantity to be in the corresponding base unit (J\text{J}, not kJ\text{kJ}).

  • Ensure the energy is converted to standard joules first before applying the nano- prefix.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert ΔHvap\Delta H_{\text{vap}} to standard joules per mole: ΔHvap=40.7 kJ/mol=40.7×103 J/mol\Delta H_{\text{vap}} = 40.7\text{ kJ/mol} = 40.7 \times 10^3\text{ J/mol}.

  2. Calculate the heat absorbed in joules: q=(1.387×10−7 mol)(40.7×103 J/mol)=5.645×10−3 Jq = (1.387 \times 10^{-7}\text{ mol})(40.7 \times 10^3\text{ J/mol}) = 5.645 \times 10^{-3}\text{ J}.

  3. Convert joules to nanojoules: q=5.645×10−3 J10−9 J/nJ=5.65×106 nJq = \frac{5.645 \times 10^{-3}\text{ J}}{10^{-9}\text{ J/nJ}} = 5.65 \times 10^6\text{ nJ}.

Final answer

q=5.65×106 nJq = 5.65 \times 10^6\text{ nJ}, N=8.35×1016 moleculesN = 8.35 \times 10^{16}\text{ molecules}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include unit labels in every intermediate calculation line to make unit mismatches obvious.

  • Practice converting thermochemical parameters from kJ\text{kJ} to J\text{J} as your immediate first step when target units involve metric submultiples like mJ\text{mJ}, μJ\mu\text{J}, or nJ\text{nJ}.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the mass in grams directly by Avogadro's number instead of first converting mass to moles, finding 1.51 × 10¹⁸ molecules.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=2.50×10−6 g/18.02 g/mol=1.387×10−7 moln = 2.50\times 10^{-6}\text{ g} / 18.02\text{ g/mol} = 1.387\times 10^{-7}\text{ mol}

  2. Step 2

    q=1.387×10−7 mol⋅40.7 kJ/mol=5.65×10−3 J  ⟹  q=5.65×10−3/10−9=5.65×106 nJq = 1.387\times 10^{-7}\text{ mol}\cdot 40.7\text{ kJ/mol} = 5.65\times 10^{-3}\text{ J} \implies q = 5.65\times 10^{-3} / 10^{-9} = 5.65\times 10^6\text{ nJ}

  3. Step 3

    N=2.50×10−6⋅6.022×1023=1.51×1018 moleculesN = 2.50\times 10^{-6}\cdot 6.022\times 10^{23} = 1.51\times 10^{18}\text{ molecules}

    Correct

    N=n⋅NA=(1.387×10−7 mol)⋅(6.022×1023 molecules/mol)≈8.35×1016 moleculesN = n\cdot N_{\text{A}} = (1.387\times 10^{-7}\text{ mol})\cdot (6.022\times 10^{23}\text{ molecules/mol}) \approx 8.35\times 10^{16}\text{ molecules}

    You multiplied the droplet's mass in grams (2.50×10−62.50\times 10^{-6}) directly by Avogadro's number. Avogadro's number represents particles per mole, so it must be multiplied by the quantity in moles (n=1.387×10−7 moln = 1.387\times 10^{-7}\text{ mol}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the amount of water in moles from its mass and molar mass.

You correctly applied the enthalpy of vaporization and accurately converted units to nanojoules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass multiplied directly by Avogadro's number

You accidentally grabbed the mass (2.50×10−6 g2.50\times 10^{-6}\text{ g}) instead of your calculated molar quantity (1.387×10−7 mol1.387\times 10^{-7}\text{ mol}) when computing particle count.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the quantity in grams with the quantity in moles when applying Avogadro's constant (N=n⋅NAN = n\cdot N_{\text{A}}). Avogadro's constant carries units of particles/mol\text{particles/mol}, which requires a molar quantity to cancel out moles and leave particle count.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Dimensional Units for Avogadro's Number
  • NA=6.022×1023 particles/molN_{\text{A}} = 6.022\times 10^{23}\text{ particles/mol}

  • Always multiply NAN_{\text{A}} by moles (nn), never by grams (mm). If your units don't cancel to leave pure count, check whether you substituted mass instead of moles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that particle count is given by N=n⋅NAN = n\cdot N_{\text{A}}.

  2. Substitute the previously calculated mole value: n=1.387×10−7 moln = 1.387\times 10^{-7}\text{ mol}.

  3. Multiply by Avogadro's constant: N=(1.387×10−7 mol)×(6.022×1023 molecules/mol)=8.35×1016 moleculesN = (1.387\times 10^{-7}\text{ mol})\times (6.022\times 10^{23}\text{ molecules/mol}) = 8.35\times 10^{16}\text{ molecules}.

Final answer

N=8.35×1016 moleculesN = 8.35\times 10^{16}\text{ molecules}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit units next to each factor in particle-count calculations to confirm moles cancel out.

  • Practice converting given mass values through the two-branch map: mass →\rightarrow moles →\rightarrow energy/particles.

Lock it in

Similar question

01

A microdroplet absorbs 3.20×10−5 J3.20\times 10^{-5}\text{ J} of energy during evaporation. What is this energy in nanojoules (1 nJ=10−9 J1\text{ nJ} = 10^{-9}\text{ J})?

Answer

3.20×104 nJ3.20\times 10^4\text{ nJ}. Key step: q=3.20×10−5 J×1 nJ10−9 J=3.20×104 nJq = 3.20\times 10^{-5}\text{ J} \times \frac{1\text{ nJ}}{10^{-9}\text{ J}} = 3.20\times 10^4\text{ nJ}.

02

A sample containing 4.50×10−8 mol4.50\times 10^{-8}\text{ mol} of ethanol vaporizes at its boiling point (ΔHvap=38.6 kJ/mol\Delta H_{\text{vap}} = 38.6\text{ kJ/mol}). Calculate the heat absorbed in microjoules (μJ\mu\text{J}, where 1 μJ=10−6 J1\ \mu\text{J} = 10^{-6}\text{ J}).

Answer

1.74×103 μJ1.74\times 10^3\ \mu\text{J} (or 1740 μJ1740\ \mu\text{J}). Key steps: q=(4.50×10−8 mol)(38.6×103 J/mol)=1.737×10−3 Jq = (4.50\times 10^{-8}\text{ mol})(38.6\times 10^3\text{ J/mol}) = 1.737\times 10^{-3}\text{ J}. Convert to μJ\mu\text{J}: 1.737×10−3 J10−6 J/μJ≈1.74×103 μJ\frac{1.737\times 10^{-3}\text{ J}}{10^{-6}\text{ J}/\mu\text{J}} \approx 1.74\times 10^3\ \mu\text{J}.

03

An aerosol particle of mercury has a mass of 8.00×10−7 g8.00\times 10^{-7}\text{ g} (M=200.59 g/molM = 200.59\text{ g/mol}, ΔHvap=59.11 kJ/mol\Delta H_{\text{vap}} = 59.11\text{ kJ/mol}). Determine both the heat absorbed upon complete vaporization in nanojoules (nJ\text{nJ}) and the number of mercury atoms vaporized.

Answer

q=2.36×105 nJq = 2.36\times 10^5\text{ nJ}, N=2.40×1015 atomsN = 2.40\times 10^{15}\text{ atoms}. Key steps: n=8.00×10−7 g200.59 g/mol=3.988×10−9 moln = \frac{8.00\times 10^{-7}\text{ g}}{200.59\text{ g/mol}} = 3.988\times 10^{-9}\text{ mol}. N=n×6.022×1023=2.40×1015 atomsN = n \times 6.022\times 10^{23} = 2.40\times 10^{15}\text{ atoms}. q=n×59.11 kJ/mol=2.357×10−7 kJ=2.357×10−4 Jq = n \times 59.11\text{ kJ/mol} = 2.357\times 10^{-7}\text{ kJ} = 2.357\times 10^{-4}\text{ J}. In nJ\text{nJ}: 2.357×10−4 J10−9 J/nJ=2.36×105 nJ\frac{2.357\times 10^{-4}\text{ J}}{10^{-9}\text{ J/nJ}} = 2.36\times 10^5\text{ nJ}.

Loading workspace…