Resources

A student attempts to determine the spontaneous cell reaction between silver and lead using the following standard reduction potentials: Ag+(aq)+e−→Ag(s)E∘=+0.80 V\text{Ag}^+(aq) + e^- \rightarrow \text{Ag}(s) \quad E^\circ = +0.80\text{ V} Pb2+(aq)+2e−→Pb(s)E∘=−0.13 V\text{Pb}^{2+}(aq) + 2e^- \rightarrow \text{Pb}(s) \quad E^\circ = -0.13\text{ V} The student argues that since the lead half-reaction must be reversed into an oxidation (giving +0.13 V+0.13\text{ V}) and multiplied by 22 to balance electrons (giving +0.26 V+0.26\text{ V}), the overall cell potential should be Ecell∘=2(+0.80 V)+(+0.26 V)=+1.86 VE^\circ_{\text{cell}} = 2(+0.80\text{ V}) + (+0.26\text{ V}) = +1.86\text{ V}. Explain why this reasoning is incorrect, state the fundamental thermodynamic convention regarding reduction potentials, and calculate the correct standard potential Ecell∘E^\circ_{\text{cell}} and balanced spontaneous equation.

Answer and steps

Final answer

Reasoning error: Standard reduction potential E∘E^\circ is an intensive thermodynamic property (ratio of energy to charge, J/C\text{J/C}) and does not scale with stoichiometric multipliers; furthermore, the standard convention is Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} without double-inverting signs. Correct balanced reaction: Pb(s)+2Ag+(aq)→Pb2+(aq)+2Ag(s)\text{Pb}(s) + 2\text{Ag}^+(aq) \rightarrow \text{Pb}^{2+}(aq) + 2\text{Ag}(s); Correct Ecell∘=(+0.80 V)−(−0.13 V)=+0.93 VE^\circ_{\text{cell}} = (+0.80\text{ V}) - (-0.13\text{ V}) = +0.93\text{ V}.

Steps

01

Identifying the Conceptual Errors

The student made two fundamental mistakes:

  1. Multiplying electrode potentials by stoichiometric coefficients: Standard reduction potential (E∘E^\circ) is an intensive property, not an extensive property. Its value represents electrical potential difference (measured in volts, where 1 V=1 J/C1\text{ V} = 1\text{ J/C}), which is the work or energy transferred per unit of charge. When a half-reaction is multiplied by a stoichiometric factor to balance electrons, both the free energy change (ΔG∘\Delta G^\circ) and the moles of electrons transferred (nn) scale by that same factor: ΔG∘=−nFE∘  ⟹  E∘=−ΔG∘nF\Delta G^\circ = -nFE^\circ \implies E^\circ = -\frac{\Delta G^\circ}{nF} Because both ΔG∘\Delta G^\circ and nn change proportionally, their ratio E∘E^\circ remains completely unchanged. Therefore, multiplying a half-reaction by any integer never alters its standard potential.
  2. Inconsistent sign conventions: Under the IUPAC standard convention, standard cell potential is evaluated directly from tabulated standard reduction potentials: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} Here, the subtraction inherently accounts for reversing the anode reaction into an oxidation. If one instead defines Ecell∘=Ered∘+Eox∘E^\circ_{\text{cell}} = E^\circ_{\text{red}} + E^\circ_{\text{ox}}, the anode value is inverted once (+0.13 V+0.13\text{ V}), but multiplying it by an extra factor of 22 causes an erroneous inflation of the voltage.

02

Determining the Spontaneous Cell Reaction

A spontaneous electrochemical reaction under standard conditions requires a positive cell potential (Ecell∘>0E^\circ_{\text{cell}} > 0).

Comparing the two standard reduction potentials:

  • AgX+(aq)+e−→Ag(s)E∘=+0.80 V\ce{Ag+}(aq) + e^- \rightarrow \ce{Ag}(s) \quad E^\circ = +0.80\text{ V}
  • PbX2+(aq)+2e−→Pb(s)E∘=−0.13 V\ce{Pb^2+}(aq) + 2e^- \rightarrow \ce{Pb}(s) \quad E^\circ = -0.13\text{ V}

Since +0.80 V>−0.13 V+0.80\text{ V} > -0.13\text{ V}, silver ion (AgX+\ce{Ag+}) has a higher tendency to gain electrons (higher reduction potential) than lead ion (PbX2+\ce{Pb^2+}). Consequently:

  • Cathode (reduction): AgX+(aq)+e−→Ag(s)Ecathode∘=+0.80 V\ce{Ag+}(aq) + e^- \rightarrow \ce{Ag}(s) \quad E^\circ_{\text{cathode}} = +0.80\text{ V}
  • Anode (oxidation): Pb(s)→PbX2+(aq)+2e−Eanode∘=−0.13 V\ce{Pb}(s) \rightarrow \ce{Pb^2+}(aq) + 2e^- \quad E^\circ_{\text{anode}} = -0.13\text{ V}

To balance the electrons transferred (n=2n = 2), multiply the cathode half-reaction by 22: 2AgX+(aq)+2e−→2Ag(s)2\ce{Ag+}(aq) + 2e^- \rightarrow 2\ce{Ag}(s)

Adding the two half-reactions yields the overall balanced spontaneous cell reaction: Pb(s)+2AgX+(aq)→PbX2+(aq)+2Ag(s)\ce{Pb}(s) + 2\ce{Ag+}(aq) \rightarrow \ce{Pb^2+}(aq) + 2\ce{Ag}(s)


03

Calculating the Standard Cell Potential (Ecell∘E^\circ_{\text{cell}})

Using the standard reduction potential formula: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} Ecell∘=(+0.80 V)−(−0.13 V)=+0.80 V+0.13 V=+0.93 VE^\circ_{\text{cell}} = (+0.80\text{ V}) - (-0.13\text{ V}) = +0.80\text{ V} + 0.13\text{ V} = +0.93\text{ V}

(Alternative check using oxidation potential: Ecell∘=Ered∘(AgX+)+Eox∘(Pb)=+0.80 V+(+0.13 V)=+0.93 VE^\circ_{\text{cell}} = E^\circ_{\text{red}}(\ce{Ag+}) + E^\circ_{\text{ox}}(\ce{Pb}) = +0.80\text{ V} + (+0.13\text{ V}) = +0.93\text{ V}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student correctly realizes potentials are intensive properties and should not be multiplied, but mistakenly adds the reversed potential by changing signs while also applying the cathode minus anode formula, resulting in double-counting the negative sign.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Standard potentials are intensive properties and do not change with stoichiometry, so they should not be multiplied by coefficients. ⟹\Longrightarrow The standard convention is Ecell∘=E∘(cathode)−E∘(anode)E^\circ_{\text{cell}} = E^\circ(\text{cathode}) - E^\circ(\text{anode}) using reduction potentials.

  2. Step 2

    E^∘\circ(ox\text{ox}) = +0.13 V\text{ V}  for Pb oxidation\text{ for Pb oxidation} \Longrightarrow E^∘\circ{cell\text{cell}} = +0.80 V\text{ V} - (+0.13 V\text{ V}) = +0.67 V\text{ V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=(+0.80 V)−(−0.13 V)=+0.93 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = (+0.80\text{ V}) - (-0.13\text{ V}) = +0.93\text{ V}  or \text{ or } Ecell∘=Ered∘+Eox∘=+0.80 V+(+0.13 V)=+0.93 VE^\circ_{\text{cell}} = E^\circ_{\text{red}} + E^\circ_{\text{ox}} = +0.80\text{ V} + (+0.13\text{ V}) = +0.93\text{ V}

    You mixed two different conventions: when using Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}, you must keep both potentials as standard reduction potentials (so Eanode∘=−0.13 VE^\circ_{\text{anode}} = -0.13\text{ V}). By inverting the sign to +0.13 V+0.13\text{ V} and still subtracting it, you double-counted the negative sign.

  3. Step 3

    2Ag\text{Ag}^+(aq) + Pb\text{Pb}(s) →\rightarrow 2Ag\text{Ag}(s) + Pb\text{Pb}^{2+}(aq)

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that standard potentials are intensive properties and must never be multiplied by stoichiometric coefficients.

You correctly stated the standard formula Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}.

You correctly identified silver reduction as the cathode and lead oxidation as the anode, balancing the overall spontaneous redox reaction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Double sign reversal in cell potential calculation

You manually inverted the sign of the lead half-cell to represent oxidation (+0.13 V+0.13\text{ V}) and then subtracted it instead of adding it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating two distinct methods for finding cell potential: the standard reduction subtraction method (Ecathode∘−Eanode∘E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}) and the oxidation-reduction addition method (Ered∘+Eox∘E^\circ_{\text{red}} + E^\circ_{\text{ox}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Choose One Consistent Cell Potential Formula
  • Use either reduction potentials directly (Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}) or add reduction and oxidation potentials (Ecell∘=Ered∘+Eox∘E^\circ_{\text{cell}} = E^\circ_{\text{red}} + E^\circ_{\text{ox}}). Never combine subtraction with a manually inverted oxidation potential.

  • If you use the minus sign in Ecathode∘−Eanode∘E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}, leave the anode potential exactly as tabulated in the reduction table (−0.13 V-0.13\text{ V}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the cathode and anode reduction potentials: E∘(Ag+/Ag)=+0.80 VE^\circ(\text{Ag}^+/\text{Ag}) = +0.80\text{ V} (cathode) and E∘(Pb2+/Pb)=−0.13 VE^\circ(\text{Pb}^{2+}/\text{Pb}) = -0.13\text{ V} (anode).

  2. Apply the standard reduction potential formula: Ecell∘=Ecathode∘−Eanode∘=(+0.80 V)−(−0.13 V)=+0.80 V+0.13 V=+0.93 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = (+0.80\text{ V}) - (-0.13\text{ V}) = +0.80\text{ V} + 0.13\text{ V} = +0.93\text{ V}.

  3. Alternatively, use oxidation potential by adding: Ecell∘=Ered∘+Eox∘=+0.80 V+(+0.13 V)=+0.93 VE^\circ_{\text{cell}} = E^\circ_{\text{red}} + E^\circ_{\text{ox}} = +0.80\text{ V} + (+0.13\text{ V}) = +0.93\text{ V}.

Final answer

E^∘\circ{cell\text{cell}} = +0.93 V\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Pick one convention when setting up galvanic cells and stick to it consistently throughout your calculations.

  • Check that spontaneous galvanic cells under standard conditions always yield Ecell∘>0E^\circ_{\text{cell}} > 0 with an overall driving force greater than either isolated reduction half-cell when combining a positive reduction with a reversed negative reduction.

OverviewACEpath Teacher's Diagnosis

02 The student treats standard reduction potential as an extensive property by scaling E° when multiplying half-reactions by stoichiometric coefficients, leading to an incorrect cell potential.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Reversing Pb\text{Pb} gives an oxidation potential of +0.13 V+0.13\text{ V}, but only the silver reaction needs to be multiplied, not both.   ⟹  2Ag+(aq)+2e−→2Ag(s),E∘=2(+0.80 V)=+1.60 V\implies 2\text{Ag}^+(aq) + 2e^- \rightarrow 2\text{Ag}(s), E^\circ = 2(+0.80\text{ V}) = +1.60\text{ V}

    Correct

    Standard reduction potential E∘E^\circ is an intensive property (work per unit charge, 1 V=1 J/C1\text{ V} = 1\text{ J/C}) and does not scale with stoichiometry: E∘(Ag+/Ag)=+0.80 VE^\circ(\text{Ag}^+/\text{Ag}) = +0.80\text{ V}.

    Standard reduction potential measures electrical potential difference (an intensive property), not total energy. When you multiply a half-reaction by 22, both the free energy change ΔG∘\Delta G^\circ and the number of transferred electrons nn double, so their ratio E∘=−ΔG∘nFE^\circ = -\frac{\Delta G^\circ}{nF} remains exactly +0.80 V+0.80\text{ V}.

  2. Step 2

    Ecell∘=+1.60 V+0.13 V=+1.73 VE^\circ_{\text{cell}} = +1.60\text{ V} + 0.13\text{ V} = +1.73\text{ V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=(+0.80 V)−(−0.13 V)=+0.93 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = (+0.80\text{ V}) - (-0.13\text{ V}) = +0.93\text{ V}

    Your formula structure was appropriate for summing reduction and oxidation potentials, but substituting the scaled +1.60 V+1.60\text{ V} instead of +0.80 V+0.80\text{ V} propagated the error into your final voltage.

  3. Step 3

    2Ag+(aq)+Pb(s)→2Ag(s)+Pb2+(aq)2\text{Ag}^+(aq) + \text{Pb}(s) \rightarrow 2\text{Ag}(s) + \text{Pb}^{2+}(aq)

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that lead is oxidized and silver ion is reduced because silver has the more positive standard reduction potential.

You correctly balanced the electron transfer between the two half-reactions to write the complete spontaneous equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scaling electrode potential with stoichiometric coefficients

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating intensive thermodynamic properties (E∘E^\circ, in J/C\text{J/C}) with extensive thermodynamic properties (ΔG∘\Delta G^\circ or ΔH∘\Delta H^\circ, in kJ/mol\text{kJ/mol}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Intensive vs. Extensive Properties in Electrochemistry
  • E∘E^\circ does not change when multiplying a half-reaction by any stoichiometric factor. Only ΔG∘\Delta G^\circ scales with coefficients.

  • Keep tabulated E∘E^\circ values unchanged when balancing electrons, and use Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Keep Ecathode∘=+0.80 VE^\circ_{\text{cathode}} = +0.80\text{ V} without multiplying by 22.

  2. Use Eanode∘=−0.13 VE^\circ_{\text{anode}} = -0.13\text{ V} for lead.

  3. Apply Ecell∘=Ecathode∘−Eanode∘=(+0.80 V)−(−0.13 V)=+0.93 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = (+0.80\text{ V}) - (-0.13\text{ V}) = +0.93\text{ V}.

Final answer

Ecell∘=+0.93 VE^\circ_{\text{cell}} = +0.93\text{ V}; balanced equation: Pb(s)+2Ag+(aq)→Pb2+(aq)+2Ag(s)\text{Pb}(s) + 2\text{Ag}^+(aq) \rightarrow \text{Pb}^{2+}(aq) + 2\text{Ag}(s)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why voltage is defined as joules per coulomb rather than total joules.

  • Practice computing standard cell potentials using the direct formula Ecathode∘−Eanode∘E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} without modifying tabulated E∘E^\circ values.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the spontaneous direction by assigning the more negative reduction potential to the cathode, predicting a non-spontaneous negative cell potential and inverted reaction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Potentials are intensive and must not be multiplied by stoichiometric coefficients.   ⟹  \implies By standard convention, the cell potential is given by Ecell∘=E∘(cathode)−E∘(anode)E^\circ_{\text{cell}} = E^\circ(\text{cathode}) - E^\circ(\text{anode}).

  2. Step 2

    Cathode is Pb\text{Pb} and anode is Ag\text{Ag}

    Correct

    Cathode is Ag+/Ag\text{Ag}^+/\text{Ag} and anode is Pb2+/Pb\text{Pb}^{2+}/\text{Pb}

    For a galvanic cell to operate spontaneously under standard conditions, Ecell∘E^\circ_{\text{cell}} must be positive. The half-reaction with the more positive standard reduction potential undergoes reduction at the cathode (+0.80 V>−0.13 V+0.80\text{ V} > -0.13\text{ V}), so silver ion is reduced at the cathode, while lead is oxidized at the anode.

  3. Step 3

    Ecell∘=−0.13 V−0.80 V=−0.93 V  ⟹  Pb2+(aq)+2Ag(s)→Pb(s)+2Ag+(aq)E^\circ_{\text{cell}} = -0.13\text{ V} - 0.80\text{ V} = -0.93\text{ V} \implies \text{Pb}^{2+}(aq) + 2\text{Ag}(s) \rightarrow \text{Pb}(s) + 2\text{Ag}^+(aq)

    Correct

    Ecell∘=(+0.80 V)−(−0.13 V)=+0.93 V  ⟹  Pb(s)+2Ag+(aq)→Pb2+(aq)+2Ag(s)E^\circ_{\text{cell}} = (+0.80\text{ V}) - (-0.13\text{ V}) = +0.93\text{ V} \implies \text{Pb}(s) + 2\text{Ag}^+(aq) \rightarrow \text{Pb}^{2+}(aq) + 2\text{Ag}(s)

    Because the electrode assignments were inverted in Step 2, your resulting cell potential was negative (indicating an electrolytic or non-spontaneous process) and the chemical equation was written in the non-spontaneous direction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated that standard potentials are intensive properties independent of stoichiometry.

You correctly cited the standard potential subtraction convention Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Cathode/Anode Assignment

You assigned the more negative reduction potential to the cathode instead of the anode.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You may have confused which half-cell undergoes reduction during spontaneous discharge, overlooking that spontaneity requires Ecell∘>0E^\circ_{\text{cell}} > 0, which dictates assigning the higher (more positive) reduction potential to the cathode.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rule of Spontaneous Cell Potentials
  • A galvanic cell runs spontaneously when Ecell∘>0E^\circ_{\text{cell}} > 0.

  • Always assign the half-reaction with the higher (more positive or less negative) reduction potential as the cathode (Ecathode∘E^\circ_{\text{cathode}}).

Check Final Sign
  • Standard cell voltage for a spontaneous process must always satisfy Ecell∘>0E^\circ_{\text{cell}} > 0.

  • If your calculated Ecell∘E^\circ_{\text{cell}} evaluates to a negative number, check whether the cathode and anode roles were swapped.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the standard reduction potentials: E∘(Ag+/Ag)=+0.80 VE^\circ(\text{Ag}^+/\text{Ag}) = +0.80\text{ V} and E∘(Pb2+/Pb)=−0.13 VE^\circ(\text{Pb}^{2+}/\text{Pb}) = -0.13\text{ V}.

  2. Since +0.80 V>−0.13 V+0.80\text{ V} > -0.13\text{ V}, silver is reduced at the cathode and lead is oxidized at the anode.

  3. Calculate standard cell potential: Ecell∘=Ecathode∘−Eanode∘=(+0.80 V)−(−0.13 V)=+0.93 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = (+0.80\text{ V}) - (-0.13\text{ V}) = +0.93\text{ V}.

  4. Combine cathode reduction (2Ag++2e−→2Ag2\text{Ag}^+ + 2e^- \rightarrow 2\text{Ag}) and anode oxidation (Pb→Pb2++2e−\text{Pb} \rightarrow \text{Pb}^{2+} + 2e^-) to balance electrons.

Final answer

Pb(s)+2Ag+(aq)→Pb2+(aq)+2Ag(s)\text{Pb}(s) + 2\text{Ag}^+(aq) \rightarrow \text{Pb}^{2+}(aq) + 2\text{Ag}(s), Ecell∘=+0.93 VE^\circ_{\text{cell}} = +0.93\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice pairing half-reactions by identifying the species with the greater reduction tendency first.

  • Verify after every cell calculation that Ecell∘>0E^\circ_{\text{cell}} > 0 whenever a question specifies a spontaneous or galvanic cell.

Lock it in

Similar question

01

A galvanic cell is constructed using the following standard reduction potentials: Fe3+(aq)+e−→Fe2+(aq)E∘=+0.77 V\text{Fe}^{3+}(aq) + e^- \rightarrow \text{Fe}^{2+}(aq) \quad E^\circ = +0.77\text{ V} Sn4+(aq)+2e−→Sn2+(aq)E∘=+0.15 V\text{Sn}^{4+}(aq) + 2e^- \rightarrow \text{Sn}^{2+}(aq) \quad E^\circ = +0.15\text{ V} Determine the spontaneous overall reaction and calculate Ecell∘E^\circ_{\text{cell}}.

Answer

Balanced equation: 2Fe3+(aq)+Sn2+(aq)→2Fe2+(aq)+Sn4+(aq)2\text{Fe}^{3+}(aq) + \text{Sn}^{2+}(aq) \rightarrow 2\text{Fe}^{2+}(aq) + \text{Sn}^{4+}(aq). Cell potential: Ecell∘=E∘(Fe3+/Fe2+)−E∘(Sn4+/Sn2+)=(+0.77 V)−(+0.15 V)=+0.62 VE^\circ_{\text{cell}} = E^\circ(\text{Fe}^{3+}/\text{Fe}^{2+}) - E^\circ(\text{Sn}^{4+}/\text{Sn}^{2+}) = (+0.77\text{ V}) - (+0.15\text{ V}) = +0.62\text{ V}.

02

Consider the standard reduction potentials: Al3+(aq)+3e−→Al(s)E∘=−1.66 V\text{Al}^{3+}(aq) + 3e^- \rightarrow \text{Al}(s) \quad E^\circ = -1.66\text{ V} Cu2+(aq)+2e−→Cu(s)E∘=+0.34 V\text{Cu}^{2+}(aq) + 2e^- \rightarrow \text{Cu}(s) \quad E^\circ = +0.34\text{ V} A student writes Ecell∘=3(+0.34 V)−2(−1.66 V)E^\circ_{\text{cell}} = 3(+0.34\text{ V}) - 2(-1.66\text{ V}). Identify the student's conceptual error and calculate the correct Ecell∘E^\circ_{\text{cell}}.

Answer

Conceptual error: The student multiplied intensive standard reduction potentials by stoichiometric coefficients (33 and 22). Correct potential: Ecell∘=Ecathode∘−Eanode∘=(+0.34 V)−(−1.66 V)=+2.00 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = (+0.34\text{ V}) - (-1.66\text{ V}) = +2.00\text{ V}.

03

Given the half-cell potentials: Cl2(g)+2e−→2Cl−(aq)E∘=+1.36 V\text{Cl}_2(g) + 2e^- \rightarrow 2\text{Cl}^-(aq) \quad E^\circ = +1.36\text{ V} MnO4−(aq)+8H+(aq)+5e−→Mn2+(aq)+4H2O(l)E∘=+1.51 V\text{MnO}_4^-(aq) + 8\text{H}^+(aq) + 5e^- \rightarrow \text{Mn}^{2+}(aq) + 4\text{H}_2\text{O}(l) \quad E^\circ = +1.51\text{ V} Calculate ΔG∘\Delta G^\circ for the spontaneous cell reaction at standard conditions (F=96485 C/molF = 96485\text{ C/mol}).

Answer

The spontaneous cell has permanganate as cathode and chloride as anode. Ecell∘=(+1.51 V)−(+1.36 V)=+0.15 VE^\circ_{\text{cell}} = (+1.51\text{ V}) - (+1.36\text{ V}) = +0.15\text{ V}. Balancing transfer requires n=10 mol e−n = 10\text{ mol } e^-. ΔG∘=−nFEcell∘=−(10)(96485)(0.15)=−1.45×105 J/mol=−145 kJ/mol\Delta G^\circ = -nFE^\circ_{\text{cell}} = -(10)(96485)(0.15) = -1.45 \times 10^5\text{ J/mol} = -145\text{ kJ/mol}.

Loading workspace…