Resources

A water treatment facility reports that a discharge basin contains 36.6 mg36.6\text{ mg} of dissolved sodium cyanide (NaCN\text{NaCN}, molar mass 49.01 g/mol49.01\text{ g/mol}) per 500.0 mL500.0\text{ mL} of water at 25∘C25^\circ\text{C}. Given that the acid dissociation constant of hydrocyanic acid is Ka(HCN)=6.20×10−10K_a(\text{HCN}) = 6.20 \times 10^{-10} and Kw=1.00×10−14K_w = 1.00 \times 10^{-14}, convert this concentration to molarity and calculate the equilibrium pOH\text{pOH} and pH\text{pH} of the solution.

Answer and steps

Final answer

[CN−]0=1.49×10−3 M[\text{CN}^-]_0 = 1.49 \times 10^{-3}\text{ M}, pOH=4.81\text{pOH} = 4.81, pH=9.19\text{pH} = 9.19

Steps

01

Calculate the Initial Molarity of NaCN\ce{NaCN}

Sodium cyanide (NaCN\ce{NaCN}) is a soluble salt that dissociates completely in water:

NaCN(s)→NaX+(aq)+CNX−(aq)\ce{NaCN (s) -> Na^+ (aq) + CN^- (aq)}

First, convert the given mass from milligrams to grams:

Mass of NaCN=36.6 mg=36.6×10−3 g=0.0366 g\text{Mass of }\ce{NaCN} = 36.6\text{ mg} = 36.6 \times 10^{-3}\text{ g} = 0.0366\text{ g}

Next, find the amount in moles using its molar mass (49.01 g/mol49.01\text{ g/mol}):

Moles of NaCN=0.0366 g49.01 g/mol=7.468×10−4 mol\text{Moles of }\ce{NaCN} = \frac{0.0366\text{ g}}{49.01\text{ g/mol}} = 7.468 \times 10^{-4}\text{ mol}

Convert the solution volume to liters (500.0 mL=0.5000 L500.0\text{ mL} = 0.5000\text{ L}) and determine the initial concentration:

[CNX−]0=7.468×10−4 mol0.5000 L=1.49×10−3 M[\ce{CN^-}]_0 = \frac{7.468 \times 10^{-4}\text{ mol}}{0.5000\text{ L}} = 1.49 \times 10^{-3}\text{ M}


02

Determine the Base Dissociation Constant (KbK_b)

The cyanide ion (CNX−\ce{CN^-}) is the conjugate base of the weak acid hydrocyanic acid (HCN\ce{HCN}). It undergoes base hydrolysis in aqueous solution:

CNX−(aq)+HX2O(l)⇌HCN(aq)+OHX−(aq)\ce{CN^- (aq) + H2O (l) <=> HCN (aq) + OH^- (aq)}

Using the relationship Kw=Ka⋅KbK_w = K_a \cdot K_b at 25∘C25^\circ\text{C}:

Kb=KwKa=1.00×10−146.20×10−10=1.61×10−5K_b = \frac{K_w}{K_a} = \frac{1.00 \times 10^{-14}}{6.20 \times 10^{-10}} = 1.61 \times 10^{-5}


03

Calculate Equilibrium [OHX−][\ce{OH^-}], pOH\text{pOH}, and pH\text{pH}

Set up the equilibrium expression for base hydrolysis:

Kb=[HCN][OHX−][CNX−]K_b = \frac{[\ce{HCN}][\ce{OH^-}]}{[\ce{CN^-}]}

Letting x=[OHX−]=[HCN]x = [\ce{OH^-}] = [\ce{HCN}], the equilibrium concentration of cyanide is [CNX−]=[CNX−]0−x≈[CNX−]0[\ce{CN^-}] = [\ce{CN^-}]_0 - x \approx [\ce{CN^-}]_0:

Kb≈x2[CNX−]0K_b \approx \frac{x^2}{[\ce{CN^-}]_0}

Solving for the hydroxide ion concentration yields:

x=[OHX−]=1.55×10−5 Mx = [\ce{OH^-}] = 1.55 \times 10^{-5}\text{ M}

Now, compute the pOH\text{pOH}:

pOH=−log⁡10[OHX−]=−log⁡10(1.55×10−5)=4.81\text{pOH} = -\log_{10}[\ce{OH^-}] = -\log_{10}(1.55 \times 10^{-5}) = 4.81

Finally, find the solution's pH\text{pH} using pH+pOH=14.00\text{pH} + \text{pOH} = 14.00:

pH=14.00−pOH=14.00−4.81=9.19\text{pH} = 14.00 - \text{pOH} = 14.00 - 4.81 = 9.19

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student directly treats the cyanide ion as a weak acid using Ka instead of finding Kb, leading to an incorrect [H⁺] calculation instead of [OH⁻].

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=0.0366 g/49.01 g/mol=7.468×10−4 moln = 0.0366\text{ g} / 49.01\text{ g/mol} = 7.468 \times 10^{-4}\text{ mol}

  2. Step 2

    M=7.468×10−4 mol/0.5000 L=1.494×10−3 MM = 7.468 \times 10^{-4}\text{ mol} / 0.5000\text{ L} = 1.494 \times 10^{-3}\text{ M}

  3. Step 3

    [H+]=Ka×C=6.20×10−10×1.494×10−3=9.62×10−7 M[\text{H}^+] = \sqrt{K_a \times C} = \sqrt{6.20 \times 10^{-10} \times 1.494 \times 10^{-3}} = 9.62 \times 10^{-7}\text{ M}

    Correct

    Kb=KwKa=1.00×10−146.20×10−10=1.61×10−5  ⟹  [OH−]=Kb×[CN−]0=1.55×10−5 MK_b = \frac{K_w}{K_a} = \frac{1.00 \times 10^{-14}}{6.20 \times 10^{-10}} = 1.61 \times 10^{-5} \implies [\text{OH}^-] = \sqrt{K_b \times [\text{CN}^-]_0} = 1.55 \times 10^{-5}\text{ M}

    Sodium cyanide dissociates to yield CN−\text{CN}^-, which is the conjugate base of the weak acid HCN\text{HCN}. Because CN−\text{CN}^- accepts protons from water to produce OH−\text{OH}^-, you must calculate Kb=Kw/KaK_b = K_w / K_a and solve for [OH−][\text{OH}^-], not [H+][\text{H}^+].

  4. Step 4

    pH=−log⁡(9.62×10−7)=6.02  ⟹  pOH=14.00−6.02=7.98  ⟹  pH=6.02\text{pH} = -\log(9.62 \times 10^{-7}) = 6.02 \implies \text{pOH} = 14.00 - 6.02 = 7.98 \implies \text{pH} = 6.02

    Correct

    pOH=−log⁡10(1.55×10−5)=4.81  ⟹  pH=14.00−4.81=9.19\text{pOH} = -\log_{10}(1.55 \times 10^{-5}) = 4.81 \implies \text{pH} = 14.00 - 4.81 = 9.19

    Your log operations were mathematically correct, but your final values were affected by solving for [H+][\text{H}^+] rather than [OH−][\text{OH}^-].

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles and initial molarity of the dissolved salt.

You correctly applied the logarithmic relationship between ion concentration, pH, and pOH.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conjugate Base Treated as Acid

You used KaK_a to solve directly for [H+][\text{H}^+] as if the solute were hydrocyanic acid (HCN\text{HCN}) rather than the cyanide anion (CN−\text{CN}^-).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the salt hydrolysis behavior: an anion derived from a weak acid acts as a weak base in aqueous solution and generates hydroxide ions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Species Nature
  • Salts containing an anion of a weak acid (like CN−\text{CN}^- from HCN\text{HCN}) undergo base hydrolysis: A−+H2O⇌HA+OH−\text{A}^- + \text{H}_2\text{O} \rightleftharpoons \text{HA} + \text{OH}^-.

  • Always check if the dissolved particle has an acidic proton to donate or a lone pair to accept a proton, and predict whether pH>7\text{pH} > 7 or pH<7\text{pH} < 7 before calculating.

Convert $K_a$ to $K_b$
  • For any conjugate acid-base pair at 25∘C25^\circ\text{C}, Kw=Ka⋅Kb=1.00×10−14K_w = K_a \cdot K_b = 1.00 \times 10^{-14}.

  • When dealing with a weak base, compute Kb=Kw/KaK_b = K_w / K_a before setting up the equilibrium square-root expression for [OH−][\text{OH}^-].

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find KbK_b for cyanide: Kb=KwKa=1.00×10−146.20×10−10=1.61×10−5K_b = \frac{K_w}{K_a} = \frac{1.00 \times 10^{-14}}{6.20 \times 10^{-10}} = 1.61 \times 10^{-5}.

  2. Set up the base hydrolysis equilibrium: [OH−]≈Kb⋅[CN−]0=(1.61×10−5)(1.494×10−3)=1.55×10−5 M[\text{OH}^-] \approx \sqrt{K_b \cdot [\text{CN}^-]_0} = \sqrt{(1.61 \times 10^{-5})(1.494 \times 10^{-3})} = 1.55 \times 10^{-5}\text{ M}.

  3. Calculate pOH=−log⁡10(1.55×10−5)=4.81\text{pOH} = -\log_{10}(1.55 \times 10^{-5}) = 4.81.

  4. Calculate pH=14.00−pOH=14.00−4.81=9.19\text{pH} = 14.00 - \text{pOH} = 14.00 - 4.81 = 9.19.

Final answer

[CN−]0=1.49×10−3 M[\text{CN}^-]_0 = 1.49 \times 10^{-3}\text{ M}, pOH=4.81\text{pOH} = 4.81, pH=9.19\text{pH} = 9.19

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up an equilibrium equation, write out the reaction of the ion with water to verify whether it produces H3O+\text{H}_3\text{O}^+ or OH−\text{OH}^-.

  • Perform a quick sanity check on your final pH: salts of weak acids and strong bases must produce a basic solution (pH>7\text{pH} > 7).

OverviewACEpath Teacher's Diagnosis

02 The student swaps the definitions of pH and pOH after finding [OH⁻], reporting -log[OH⁻] as the pH.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=0.0366 g/49.01 g/mol=7.468×10−4 mol  ⟹  M=7.468×10−4 mol0.5000 L=1.494×10−3 Mn = 0.0366\text{ g} / 49.01\text{ g/mol} = 7.468 \times 10^{-4}\text{ mol} \implies M = \frac{7.468 \times 10^{-4}\text{ mol}}{0.5000\text{ L}} = 1.494 \times 10^{-3}\text{ M}

  2. Step 2

    Kb=KwKa=1.00×10−146.20×10−10=1.613×10−5K_b = \frac{K_w}{K_a} = \frac{1.00 \times 10^{-14}}{6.20 \times 10^{-10}} = 1.613 \times 10^{-5}

  3. Step 3

    [OH−]=1.613×10−5×1.494×10−3=1.55×10−4 M[\text{OH}^-] = \sqrt{1.613 \times 10^{-5} \times 1.494 \times 10^{-3}} = 1.55 \times 10^{-4}\text{ M}

  4. Step 4

    pH=−log⁡[OH−]=3.81  ⟹  pOH=14.00−3.81=10.19\text{pH} = -\log[\text{OH}^-] = 3.81 \implies \text{pOH} = 14.00 - 3.81 = 10.19

    Correct

    pOH=−log⁡[OH−]=−log⁡(1.55×10−4)=3.81  ⟹  pH=14.00−pOH=10.19\text{pOH} = -\log[\text{OH}^-] = -\log(1.55 \times 10^{-4}) = 3.81 \implies \text{pH} = 14.00 - \text{pOH} = 10.19

    Taking −log⁡[OH−]-\log[\text{OH}^-] yields pOH\text{pOH}, not pH\text{pH}. Because NaCN\text{NaCN} is a basic salt, the equilibrium pH\text{pH} must be above 77.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the molar concentration of the dissolved cyanide salt.

You correctly related the acid dissociation constant KaK_a to KbK_b using KwK_w.

You set up and solved the equilibrium square root expression accurately to find [OH−][\text{OH}^-].

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Definition swap between pH and pOH

You assigned the negative logarithm of hydroxide concentration directly to pH\text{pH} instead of pOH\text{pOH}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the definitions pH=−log⁡[H+]\text{pH} = -\log[\text{H}^+] and pOH=−log⁡[OH−]\text{pOH} = -\log[\text{OH}^-] during base hydrolysis calculations, overlooking that cyanide generates a basic solution where pH>7\text{pH} > 7.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match ion to p-scale
  • pOH=−log⁡[OH−]\text{pOH} = -\log[\text{OH}^-] and pH=−log⁡[H+]\text{pH} = -\log[\text{H}^+]

  • Always label −log⁡[OH−]-\log[\text{OH}^-] as pOH\text{pOH}, then subtract from 14.0014.00 to obtain pH\text{pH}.

Chemical intuition sanity check
  • Conjugate bases of weak acids form basic solutions (pH>7\text{pH} > 7 at 25∘C25^\circ\text{C}).

  • Check your calculated pH\text{pH} against the expected acidity/basicity of the solute before finalizing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate pOH=−log⁡[OH−]=−log⁡(1.55×10−4)=3.81\text{pOH} = -\log[\text{OH}^-] = -\log(1.55 \times 10^{-4}) = 3.81.

  2. Use the water autoionization relationship pH+pOH=14.00\text{pH} + \text{pOH} = 14.00 at 25∘C25^\circ\text{C}.

  3. Solve for pH=14.00−pOH=14.00−3.81=10.19\text{pH} = 14.00 - \text{pOH} = 14.00 - 3.81 = 10.19.

Final answer

pOH=3.81\text{pOH} = 3.81, pH=10.19\text{pH} = 10.19 (or 4.814.81 and 9.199.19 with intermediate workbook rounding)

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full formula names 'pOH = -log[OH⁻]' and 'pH = 14 - pOH' explicitly whenever you solve a weak base problem.

  • Perform a qualitative check at the end: salts of weak acids must yield a pH greater than 7.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the volume from milliliters to liters when calculating molarity, resulting in a concentration three orders of magnitude too low.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=0.0366 g/49.01 g/mol=7.468×10−4 moln = 0.0366\text{ g} / 49.01\text{ g/mol} = 7.468 \times 10^{-4}\text{ mol}

  2. Step 2

    M=7.468×10−4 mol/500.0=1.494×10−6 MM = 7.468 \times 10^{-4}\text{ mol} / 500.0 = 1.494 \times 10^{-6}\text{ M}

    Correct

    M=7.468×10−4 mol0.5000 L=1.494×10−3 MM = \frac{7.468 \times 10^{-4}\text{ mol}}{0.5000\text{ L}} = 1.494 \times 10^{-3}\text{ M}

    Molarity is defined as moles of solute per liter of solution (mol/L\text{mol/L}). Because the volume is 500.0 mL500.0\text{ mL}, you must convert it to 0.5000 L0.5000\text{ L} before dividing.

  3. Step 3

    Kb=1.00×10−14/6.20×10−10=1.613×10−5K_b = 1.00 \times 10^{-14} / 6.20 \times 10^{-10} = 1.613 \times 10^{-5}

  4. Step 4

    [OH−]=1.613×10−5×1.494×10−6=4.91×10−6 M[\text{OH}^-] = \sqrt{1.613 \times 10^{-5} \times 1.494 \times 10^{-6}} = 4.91 \times 10^{-6}\text{ M}

    Correct

    [OH−]=1.613×10−5×1.494×10−3=1.552×10−5 M[\text{OH}^-] = \sqrt{1.613 \times 10^{-5} \times 1.494 \times 10^{-3}} = 1.552 \times 10^{-5}\text{ M}

    Your equilibrium formula [OHX−]=Kb⋅[CNX−]0[\ce{OH^-}] = \sqrt{K_b \cdot [\ce{CN^-}]_0} is set up properly, but the result inherits the volume conversion error from Step 2.

  5. Step 5

    pOH=−log⁡(4.91×10−6)=5.31  ⟹  pH=14.00−5.31=8.69\text{pOH} = -\log(4.91 \times 10^{-6}) = 5.31 \implies \text{pH} = 14.00 - 5.31 = 8.69

    Correct

    pOH=−log⁡(1.552×10−5)=4.81  ⟹  pH=14.00−4.81=9.19\text{pOH} = -\log(1.552 \times 10^{-5}) = 4.81 \implies \text{pH} = 14.00 - 4.81 = 9.19

    Your formulas for pOH\text{pOH} and pH\text{pH} are correct, but the final numbers reflect the propagated concentration error.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted milligrams to grams and computed the correct number of moles.

You applied the conjugate relationship Kb=Kw/KaK_b = K_w / K_a accurately.

You used the correct equilibrium expression and logarithmic formulas for pOH\text{pOH} and pH\text{pH}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error in Molarity

You divided by the raw volume value of 500.0500.0 instead of converting milliliters to liters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit consistency in the definition of molarity (M=mol/LM = \text{mol}/\text{L}) when given volume in milliliters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity Volume Rule
  • Molarity always requires solution volume in liters: M=nV (in L)=nV (in mL)×10−3 L/mLM = \frac{n}{V\text{ (in L)}} = \frac{n}{V\text{ (in mL)} \times 10^{-3}\text{ L/mL}}.

  • Always write out units explicitly alongside numbers during substitution so unit mismatches stand out immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the initial concentration using liters: [CNX−]0=7.468×10−4 mol0.5000 L=1.494×10−3 M[\ce{CN^-}]_0 = \frac{7.468 \times 10^{-4}\text{ mol}}{0.5000\text{ L}} = 1.494 \times 10^{-3}\text{ M}.

  2. Recalculate hydroxide concentration: [OHX−]=1.613×10−5×1.494×10−3=1.552×10−5 M[\ce{OH^-}] = \sqrt{1.613 \times 10^{-5} \times 1.494 \times 10^{-3}} = 1.552 \times 10^{-5}\text{ M}.

  3. Compute pOH\text{pOH}: pOH=−log⁡10(1.552×10−5)=4.81\text{pOH} = -\log_{10}(1.552 \times 10^{-5}) = 4.81.

  4. Compute pH\text{pH}: pH=14.00−4.81=9.19\text{pH} = 14.00 - 4.81 = 9.19.

Final answer

[CNX−]0=1.49×10−3 M[\ce{CN^-}]_0 = 1.49 \times 10^{-3}\text{ M}, pOH=4.81\text{pOH} = 4.81, pH=9.19\text{pH} = 9.19

NEXT STEPS
Final Takeaways from Your Teacher
  • Before dividing to find molarity, circle the volume unit and convert mL\text{mL} to L\text{L} as an explicit first step.

  • Check that basic solutions have a pH>7\text{pH} > 7 and that reasonable millimolar concentrations of moderately weak bases typically produce a pH\text{pH} in the 99–1111 range.

Lock it in

Similar question

01

Calculate the equilibrium [OH−][\text{OH}^-] and pH\text{pH} of a 0.050 M0.050\text{ M} sodium hypochlorite (NaOCl\text{NaOCl}) solution at 25∘C25^\circ\text{C}. Given: Ka(HOCl)=3.0×10−8K_a(\text{HOCl}) = 3.0 \times 10^{-8} and Kw=1.0×10−14K_w = 1.0 \times 10^{-14}.

Answer

[OH−]=4.1×10−4 M[\text{OH}^-] = 4.1 \times 10^{-4}\text{ M}, pH=10.61\text{pH} = 10.61. Key steps: Kb=1.0×10−143.0×10−8=3.33×10−7K_b = \frac{1.0 \times 10^{-14}}{3.0 \times 10^{-8}} = 3.33 \times 10^{-7}; [OH−]=Kb⋅C=(3.33×10−7)(0.050)=4.08×10−4 M[\text{OH}^-] = \sqrt{K_b \cdot C} = \sqrt{(3.33 \times 10^{-7})(0.050)} = 4.08 \times 10^{-4}\text{ M}; pOH=3.39  ⟹  pH=14.00−3.39=10.61\text{pOH} = 3.39 \implies \text{pH} = 14.00 - 3.39 = 10.61.

02

A 250.0 mL250.0\text{ mL} aqueous solution is prepared by dissolving 1.64 g1.64\text{ g} of sodium acetate (CH3COONa\text{CH}_3\text{COONa}, molar mass 82.03 g/mol82.03\text{ g/mol}) at 25∘C25^\circ\text{C}. Given Ka(CH3COOH)=1.80×10−5K_a(\text{CH}_3\text{COOH}) = 1.80 \times 10^{-5} and Kw=1.00×10−14K_w = 1.00 \times 10^{-14}, find the initial molarity of acetate and the solution pH\text{pH}.

Answer

[CH3COO−]0=0.0800 M[\text{CH}_3\text{COO}^-]_0 = 0.0800\text{ M}, pH=8.82\text{pH} = 8.82. Key steps: n=1.64 g82.03 g/mol=0.0200 moln = \frac{1.64\text{ g}}{82.03\text{ g/mol}} = 0.0200\text{ mol}; M=0.0200 mol0.2500 L=0.0800 MM = \frac{0.0200\text{ mol}}{0.2500\text{ L}} = 0.0800\text{ M}; Kb=1.00×10−141.80×10−5=5.56×10−10K_b = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} = 5.56 \times 10^{-10}; [OH−]=(5.56×10−10)(0.0800)=6.67×10−6 M[\text{OH}^-] = \sqrt{(5.56 \times 10^{-10})(0.0800)} = 6.67 \times 10^{-6}\text{ M}; pOH=5.18  ⟹  pH=8.82\text{pOH} = 5.18 \implies \text{pH} = 8.82.

03

A wastewater sample containing potassium nitrite (KNO2\text{KNO}_2) has a measured pH\text{pH} of 8.158.15 at 25∘C25^\circ\text{C}. Given Ka(HNO2)=4.50×10−4K_a(\text{HNO}_2) = 4.50 \times 10^{-4} and Kw=1.00×10−14K_w = 1.00 \times 10^{-14}, calculate the molar concentration of nitrite ion in the wastewater.

Answer

[NO2−]≈8.99×10−2 M[\text{NO}_2^-] \approx 8.99 \times 10^{-2}\text{ M}. Key steps: pOH=14.00−8.15=5.85  ⟹  [OH−]=10−5.85=1.413×10−6 M\text{pOH} = 14.00 - 8.15 = 5.85 \implies [\text{OH}^-] = 10^{-5.85} = 1.413 \times 10^{-6}\text{ M}; Kb=1.00×10−144.50×10−4=2.22×10−11K_b = \frac{1.00 \times 10^{-14}}{4.50 \times 10^{-4}} = 2.22 \times 10^{-11}; using [OH−]=Kb⋅C[\text{OH}^-] = \sqrt{K_b \cdot C}, we get C=[OH−]2Kb=(1.413×10−6)22.22×10−11=0.0899 MC = \frac{[\text{OH}^-]^2}{K_b} = \frac{(1.413 \times 10^{-6})^2}{2.22 \times 10^{-11}} = 0.0899\text{ M}.

Loading workspace…