Resources

A capillary tube with an internal radius of r=0.250 mmr = 0.250\text{ mm} (2.50×10−4 m2.50 \times 10^{-4}\text{ m}) is placed vertically into a sample of pure water at 20.0∘C20.0^\circ\text{C} (density ρ=998 kg/m3\rho = 998\text{ kg/m}^3, surface tension γ=0.0728 N/m\gamma = 0.0728\text{ N/m}, contact angle θ=0∘\theta = 0^\circ). The capillary rise height is governed by Jurin's law, h=2γcos⁡θρgrh = \frac{2\gamma\cos\theta}{\rho g r}, where g=9.81 m/s2g = 9.81\text{ m/s}^2. (a) Calculate the capillary rise height hh in centimeters. (b) Explain how the balance between adhesive forces (water-to-glass) and cohesive forces (water-to-water hydrogen bonding) produces both the observed meniscus curvature and this capillary elevation.

Answer and steps

Final answer

(a) h=5.95 cmh = 5.95\text{ cm}; (b) Strong adhesive dipole and hydrogen-bonding attractions between polar water molecules and silanol groups (Si−OH\text{Si}-\text{OH}) in glass exceed the cohesive hydrogen bonding among bulk water molecules, forming a concave meniscus (thetaapprox0∘\\theta \\approx 0^\circ); surface tension pulls the liquid column upward until the upward vertical component of surface tension balances the hydrostatic downward gravitational weight of the column.

Steps

Part (a): Calculating the Capillary Rise Height

  1. Identify the governing equation and given values: The height hh to which a liquid rises in a capillary tube is given by Jurin's law: h=2γcos⁡θρgrh = \frac{2\gamma\cos\theta}{\rho g r}

    • Surface tension of water: γ=0.0728 N/m\gamma = 0.0728\text{ N/m}
    • Contact angle: θ=0∘\theta = 0^\circ, so cos⁡0∘=1\cos 0^\circ = 1
    • Density of water: ρ=998 kg/m3\rho = 998\text{ kg/m}^3
    • Acceleration due to gravity: g=9.81 m/s2g = 9.81\text{ m/s}^2
    • Capillary tube radius: r=2.50×10−4 mr = 2.50 \times 10^{-4}\text{ m}
  2. Calculate the numerator (upward pulling term): 2γcos⁡θ=2⋅(0.0728 N/m)⋅1=0.1456 N/m2\gamma\cos\theta = 2 \cdot (0.0728\text{ N/m}) \cdot 1 = 0.1456\text{ N/m}
  3. Calculate the denominator (hydrostatic resistance term): ρgr=(998 kg/m3)⋅(9.81 m/s2)⋅(2.50×10−4 m)=2.4476 N/m2\rho g r = (998\text{ kg/m}^3) \cdot (9.81\text{ m/s}^2) \cdot (2.50 \times 10^{-4}\text{ m}) = 2.4476\text{ N/m}^2
  4. Solve for hh and convert to centimeters: h=0.1456 N/m2.4476 N/m2≈0.05949 mh = \frac{0.1456\text{ N/m}}{2.4476\text{ N/m}^2} \approx 0.05949\text{ m} h=0.05949 m×100 cm/m≈5.95 cmh = 0.05949\text{ m} \times 100\text{ cm/m} \approx 5.95\text{ cm}

Part (b): Molecular Forces and Capillary Action

  1. Adhesion versus Cohesion:

    • Cohesive forces are the intermolecular forces (primarily hydrogen bonds) between identical liquid molecules (water–water).
    • Adhesive forces are the attractive forces between the liquid and the solid surface. Glass consists of silicate networks with polar surface silanol groups (−Si−OH\ce{-Si-OH}), which form strong dipole–dipole and hydrogen-bonding interactions with water molecules.
    • Because the adhesive water–glass attractions are stronger than the cohesive water–water attractions, water molecules spread upward along the glass wall.
  2. Formation of the Concave Meniscus:

    • As water crawls up the walls of the tube, the surface curves upward at the perimeter, establishing a concave meniscus with a contact angle approaching θ≈0∘\theta \approx 0^\circ.
  3. Mechanical Equilibrium and Liquid Rise:

    • Surface tension acts along the contact perimeter (2πr2\pi r), exerting an upward net vertical force: Fup=2πrγcos⁡θF_{\text{up}} = 2\pi r \gamma \cos\theta
    • This upward force pulls the column of water up the tube until it is exactly balanced by the downward gravitational weight of the elevated liquid column: Fdown=mg=ρ(πr2h)gF_{\text{down}} = m g = \rho (\pi r^2 h) g
    • Equating Fup=FdownF_{\text{up}} = F_{\text{down}} yields Jurin's law, demonstrating that the liquid reaches a stable elevated height when the upward surface tension force balances the weight of the water column.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the radius from millimeters to meters in SI units, yielding an answer that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    h=2×0.0728×cos⁡(0∘)998×9.81×0.250h = \frac{2 \times 0.0728 \times \cos(0^\circ)}{998 \times 9.81 \times 0.250}

    Correct

    h=2×0.0728 N/m×cos⁡(0∘)998 kg/m3×9.81 m/s2×2.50×10−4 mh = \frac{2 \times 0.0728\text{ N/m} \times \cos(0^\circ)}{998\text{ kg/m}^3 \times 9.81\text{ m/s}^2 \times 2.50 \times 10^{-4}\text{ m}}

    You substituted the radius value as 0.2500.250 directly from the given millimeters without converting it to base SI units (meters). Because surface tension is in N/m\text{N/m} and density is in kg/m3\text{kg/m}^3, the radius must be in meters: r=2.50×10−4 mr = 2.50 \times 10^{-4}\text{ m}.

  2. Step 2

    h=0.14562447.6=5.95×10−5 m  ⟹  h=5.95×10−3 cmh = \frac{0.1456}{2447.6} = 5.95 \times 10^{-5}\text{ m} \implies h = 5.95 \times 10^{-3}\text{ cm}

    Correct

    h=0.14562.4476≈0.0595 m  ⟹  h=5.95 cmh = \frac{0.1456}{2.4476} \approx 0.0595\text{ m} \implies h = 5.95\text{ cm}

    Your arithmetic and conversion from meters to centimeters (1 m=100 cm1\text{ m} = 100\text{ cm}) were carried out correctly, but the numerical value inherited the factor-of-10001000 error from the unconverted radius.

  3. Step 3

    Adhesive forces between water and glass are stronger than cohesive hydrogen bonds within water, pulling the liquid edges up into a concave meniscus. The upward surface tension force around the tube perimeter lifts water until balanced by the weight of the water column.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct formula for Jurin's law and recognized that cos⁡(0∘)=1\cos(0^\circ) = 1.

You correctly converted your calculated meters into centimeters by multiplying by 100100.

You accurately explained how adhesive forces exceed cohesive forces to create a concave meniscus and capillary elevation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unconverted non-SI unit in physical formula

You plugged in the radius directly as 0.2500.250 instead of using its value in meters, 2.50×10−4 m2.50 \times 10^{-4}\text{ m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked unit consistency across the terms of the equation: when using derived SI units like N/m\text{N/m} and kg/m3\text{kg/m}^3, length dimensions must be expressed in meters rather than millimeters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Unit Consistency
  • Every length measurement in an SI equation involving Newtons or kilograms must be converted to meters (m\text{m}) before calculating.

  • Always write the unit beside every number in your substitution line to ensure units cancel cleanly to meters.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the radius in meters: r=0.250 mm=2.50×10−4 mr = 0.250\text{ mm} = 2.50 \times 10^{-4}\text{ m}.

  2. Compute the denominator: ρgr=(998 kg/m3)(9.81 m/s2)(2.50×10−4 m)=2.4476 N/m2\rho g r = (998\text{ kg/m}^3)(9.81\text{ m/s}^2)(2.50 \times 10^{-4}\text{ m}) = 2.4476\text{ N/m}^2.

  3. Compute the numerator: 2γcos⁡(0∘)=2(0.0728 N/m)(1)=0.1456 N/m2\gamma \cos(0^\circ) = 2(0.0728\text{ N/m})(1) = 0.1456\text{ N/m}.

  4. Evaluate hh in meters: h=0.14562.4476≈0.05949 mh = \frac{0.1456}{2.4476} \approx 0.05949\text{ m}.

  5. Convert to centimeters: h=0.05949 m×100 cm/m=5.95 cmh = 0.05949\text{ m} \times 100\text{ cm/m} = 5.95\text{ cm}.

Final answer

(a) h=5.95 cmh = 5.95\text{ cm}; (b) Adhesive water-glass attractions exceed cohesive water hydrogen bonds, forming a concave meniscus; upward surface tension along the contact line balances the gravitational weight of the water column.

NEXT STEPS
Final Takeaways from Your Teacher
  • Before plugging values into a physics or chemistry formula, list all given quantities with explicit base SI units.

  • Double-check your final answer against physical reality: a 0.5 mm0.5\text{ mm} bore capillary tube draws water upward by several centimeters, whereas 5.95×10−3 cm5.95 \times 10^{-3}\text{ cm} (0.06 mm0.06\text{ mm}) would be practically imperceptible.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 2 in Jurin's law formula, calculating only half of the true capillary rise height.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    h=(γ⋅cos⁡(θ))/(ρ⋅g⋅r)  ⟹  h=(0.0728⋅cos⁡(0∘))/(998⋅9.81⋅2.50×10−4)h = (\gamma \cdot \cos(\theta)) / (\rho \cdot g \cdot r) \implies h = (0.0728 \cdot \cos(0^\circ)) / (998 \cdot 9.81 \cdot 2.50 \times 10^{-4})

    Correct

    h=2γcos⁡θρgr=2(0.0728 N/m)cos⁡(0∘)(998 kg/m3)(9.81 m/s2)(2.50×10−4 m)h = \frac{2\gamma\cos\theta}{\rho g r} = \frac{2(0.0728\text{ N/m})\cos(0^\circ)}{(998\text{ kg/m}^3)(9.81\text{ m/s}^2)(2.50 \times 10^{-4}\text{ m})}

    You omitted the factor of 22 in the numerator of Jurin's law. The upward pulling force acts along the entire circular circumference (2πr2\pi r), while the downward gravitational weight acts over the cross-sectional area (πr2\pi r^2), which leaves a factor of 2r\frac{2}{r} in the final height formula.

  2. Step 2

    h=0.0728/2.4476=0.0297 m  ⟹  h=2.97 cmh = 0.0728 / 2.4476 = 0.0297\text{ m} \implies h = 2.97\text{ cm}

    Correct

    h=0.14562.4476≈0.0595 m=5.95 cmh = \frac{0.1456}{2.4476} \approx 0.0595\text{ m} = 5.95\text{ cm}

    Your arithmetic evaluation and conversion from meters to centimeters were carried out correctly, but the numerical result is half of the actual rise height due to the missing factor of 22 in Step 1.

  3. Step 3

    Stronger adhesive forces than cohesive forces pull the contact line up to form a concave meniscus. Surface tension pulls the liquid column upward until balanced by gravity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted all physical constants, including density, gravity, radius, and surface tension with consistent SI units.

You carried out the arithmetic and converted meters to centimeters accurately.

You clearly explained the microscopic origin of the concave meniscus and the force balance governing capillary rise in Part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted factor of 2 in Jurin's law

You set up Jurin's law with γcos⁡θ\gamma\cos\theta rather than 2γcos⁡θ2\gamma\cos\theta in the numerator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely recalled the surface tension force per unit length (γ\gamma) or the pressure jump across a single cylindrical interface rather than balancing the total perimeter force (Fup=2πrγcos⁡θF_{\text{up}} = 2\pi r \gamma \cos\theta) against the column weight (Fdown=ρπr2ghF_{\text{down}} = \rho \pi r^2 g h), where the ratio of perimeter to area yields the factor of 22.

REASONING PATH
Your ACEpath teacher’s suggested approach
Deriving the Geometric Factor in Jurin's Law
  • Upward vertical force equals downward gravitational force: 2πrγcos⁡θ=ρπr2gh2\pi r \gamma \cos\theta = \rho \pi r^2 g h.

  • Cancel πr\pi r from both sides to confirm that h=2γcos⁡θρgrh = \frac{2\gamma\cos\theta}{\rho g r}, always preserving the factor of 22 from the perimeter-to-area ratio 2πrπr2=2r\frac{2\pi r}{\pi r^2} = \frac{2}{r}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. h=2γcos⁡θρgrh = \frac{2\gamma\cos\theta}{\rho g r}

  2. h=2(0.0728 N/m)cos⁡(0∘)(998 kg/m3)(9.81 m/s2)(2.50×10−4 m)=0.14562.4476 m≈0.05949 mh = \frac{2(0.0728\text{ N/m})\cos(0^\circ)}{(998\text{ kg/m}^3)(9.81\text{ m/s}^2)(2.50 \times 10^{-4}\text{ m})} = \frac{0.1456}{2.4476}\text{ m} \approx 0.05949\text{ m}

  3. h=0.05949 m×100 cm/m≈5.95 cmh = 0.05949\text{ m} \times 100\text{ cm/m} \approx 5.95\text{ cm}

Final answer

(a) h=5.95 cmh = 5.95\text{ cm}; (b) Strong adhesive forces (water-to-glass) exceed cohesive forces (water-to-water) to form a concave meniscus, and the net upward surface tension force balances the gravitational weight of the liquid column.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check formulas derived from boundary force balances by mentally equating the boundary perimeter force (2πrγ2\pi r \gamma) with the bulk cross-sectional weight (πr2ρgh\pi r^2 \rho g h).

  • Review Jurin's law flashcards to reinforce the origin of the factor of 22.

OverviewACEpath Teacher's Diagnosis

03 The student confuses adhesive and cohesive forces, asserting that cohesive forces between water molecules dominate and pull the liquid up.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    h=2×0.0728×cos⁡(0∘)998×9.81×2.50×10−4  ⟹  h=0.14562.4476=0.0595 m  ⟹  h=5.95 cmh = \frac{2 \times 0.0728 \times \cos(0^\circ)}{998 \times 9.81 \times 2.50 \times 10^{-4}} \implies h = \frac{0.1456}{2.4476} = 0.0595\text{ m} \implies h = 5.95\text{ cm}

  2. Step 2

    "Cohesive forces from hydrogen bonding between water molecules are stronger than adhesive forces to the glass, causing water molecules to pull each other upward into a concave meniscus. The internal cohesive tension continues pulling water up the tube until balanced by gravity."

    Correct

    Strong adhesive forces (dipole–dipole and hydrogen bonding between polar water molecules and silanol −Si−OH\ce{-Si-OH} groups on the glass) exceed the cohesive forces among bulk water molecules. This pulls water up the glass walls to form a concave meniscus, and surface tension along the contact perimeter draws the liquid column upward until balanced by gravity (Fup=2πrγcos⁡θ=ρπr2hgF_{\text{up}} = 2\pi r \gamma \cos\theta = \rho \pi r^2 h g).

    Adhesive forces between water and glass are actually stronger than the cohesive forces within water. If cohesive forces were stronger, water would avoid the glass surface, forming a convex meniscus and resulting in capillary depression.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied Jurin's law with consistent SI units in part (a).

You correctly recognized that gravity balances the upward pull of surface tension at equilibrium in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cohesive vs. adhesive force reversal in capillary action

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the definitions and roles of adhesion versus cohesion, reasoning that internal cohesion pulls the liquid upward rather than external adhesive wetting along the tube walls.

REASONING PATH
Your ACEpath teacher’s suggested approach
Adhesion vs. Cohesion Distinction
  • Adhesion refers to attractive forces between unlike substances (liquid and tube wall), whereas cohesion refers to attractions between like molecules (within the liquid).

  • Check whether the liquid wets the wall: wetting means adhesive forces dominate over cohesive forces.

Meniscus Shape and Capillary Rise Rule
  • When adhesive forces exceed cohesive forces (adhesion>cohesion\text{adhesion} > \text{cohesion}), the contact angle satisfies θ<90∘\theta < 90^\circ, producing a concave meniscus and capillary rise (h>0h > 0).

  • Confirm that capillary rise always requires stronger adhesive attractions to pull the liquid up against its own internal cohesion.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the two interacting pairs: adhesive forces exist between water molecules and glass silanol groups (−Si−OH\ce{-Si-OH}), while cohesive forces exist between adjacent water molecules via hydrogen bonding.

  2. Compare their relative strengths: because the polar glass surface offers strong bonding sites, adhesive water–glass forces are stronger than cohesive water–water forces (adhesion>cohesion\text{adhesion} > \text{cohesion}).

  3. Explain meniscus curvature: because water is attracted more strongly to the glass than to itself, water climbs up the walls, creating a concave meniscus with a contact angle near θ=0∘\theta = 0^\circ.

  4. Explain capillary rise: the upward vertical component of surface tension along the inner circumference (2πrγcos⁡θ2\pi r \gamma \cos\theta) lifts the liquid column until it balances the downward gravitational weight (mg=ρπr2hgmg = \rho \pi r^2 h g).

Final answer

(a) h=5.95 cmh = 5.95\text{ cm}; (b) Adhesive attractions between water and the polar glass surface exceed internal water–water cohesive forces, wetting the walls to form a concave meniscus and drawing the water column upward until balanced by gravity.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the contrasting behavior of mercury in glass (where cohesion exceeds adhesion, yielding a convex meniscus and capillary depression).

  • Practice drawing free-body diagrams of the liquid contact line at a solid interface to visualize how adhesive wetting creates the upward surface tension force vector.

Lock it in

Similar question

01

A glass capillary tube of internal radius r=0.500 mmr = 0.500\text{ mm} is dipped into ethanol (density ρ=789 kg/m3\rho = 789\text{ kg/m}^3, surface tension γ=0.0223 N/m\gamma = 0.0223\text{ N/m}, contact angle θ=0∘\theta = 0^\circ). Calculate the capillary rise height hh in centimeters (g=9.81 m/s2g = 9.81\text{ m/s}^2).

Answer

h=1.15 cmh = 1.15\text{ cm}. Convert r=0.500 mm=5.00×10−4 mr = 0.500\text{ mm} = 5.00 \times 10^{-4}\text{ m}. Using Jurin's law: h=2(0.0223)(1)(789)(9.81)(5.00×10−4)=0.04463.870≈0.01152 m=1.15 cmh = \frac{2(0.0223)(1)}{(789)(9.81)(5.00 \times 10^{-4})} = \frac{0.0446}{3.870} \approx 0.01152\text{ m} = 1.15\text{ cm}.

02

Liquid mercury has a density of ρ=13,550 kg/m3\rho = 13{,}550\text{ kg/m}^3, surface tension γ=0.485 N/m\gamma = 0.485\text{ N/m}, and contact angle θ=140∘\theta = 140^\circ on glass. Calculate the capillary depression height hh in millimeters in a glass tube with radius r=0.750 mmr = 0.750\text{ mm} (g=9.81 m/s2g = 9.81\text{ m/s}^2).

Answer

h=−7.47 mmh = -7.47\text{ mm} (a depression of 7.47 mm7.47\text{ mm}). Convert r=7.50×10−4 mr = 7.50 \times 10^{-4}\text{ m}. With cos⁡(140∘)≈−0.7660\cos(140^\circ) \approx -0.7660, h=2(0.485)(−0.7660)(13550)(9.81)(7.50×10−4)=−0.743199.70≈−0.00745 m=−7.45 mmh = \frac{2(0.485)(-0.7660)}{(13550)(9.81)(7.50 \times 10^{-4})} = \frac{-0.7431}{99.70} \approx -0.00745\text{ m} = -7.45\text{ mm}.

03

An unknown liquid rises to a height of h=4.20 cmh = 4.20\text{ cm} in a clean glass capillary tube with diameter d=0.360 mmd = 0.360\text{ mm}. If the liquid completely wets the glass (θ=0∘\theta = 0^\circ) and has a density of ρ=820 kg/m3\rho = 820\text{ kg/m}^3, determine the surface tension γ\gamma of the liquid in N/m\text{N/m} (g=9.81 m/s2g = 9.81\text{ m/s}^2).

Answer

γ=0.0304 N/m\gamma = 0.0304\text{ N/m}. First, find radius r=d2=0.180 mm=1.80×10−4 mr = \frac{d}{2} = 0.180\text{ mm} = 1.80 \times 10^{-4}\text{ m}, and convert height h=0.0420 mh = 0.0420\text{ m}. Rearranging Jurin's law gives γ=ρgrh2cos⁡θ=(820)(9.81)(1.80×10−4)(0.0420)2(1)≈0.0304 N/m\gamma = \frac{\rho g r h}{2\cos\theta} = \frac{(820)(9.81)(1.80 \times 10^{-4})(0.0420)}{2(1)} \approx 0.0304\text{ N/m}.

Loading workspace…