Resources

A precision quartz capillary used in automated nanofluidic chromatography has an internal volume limit of 5.00×10−4 cm35.00 \times 10^{-4}\text{ cm}^3 before backpressure causes physical rupture. An organic solvent with density ρ=7.89×102 kg/m3\rho = 7.89 \times 10^2\text{ kg}/\text{m}^3 is injected into the dry capillary at a micro-metered mass of 4.15×10−4 g4.15 \times 10^{-4}\text{ g}. (a) Calculate the exact volume occupied by this solvent mass in cubic meters (m3\text{m}^3) expressed in scientific notation. (b) Determine whether this injected mass exceeds the capillary volume rupture threshold.

Answer and steps

Final answer

(a) 5.26×10−10 m35.26 \times 10^{-10}\text{ m}^3; (b) Yes, the solvent volume (5.26×10−10 m3=5.26×10−4 cm35.26 \times 10^{-10}\text{ m}^3 = 5.26 \times 10^{-4}\text{ cm}^3) exceeds the critical threshold of 5.00×10−4 cm35.00 \times 10^{-4}\text{ cm}^3.

Steps

Part (a): Calculating the Volume in Cubic Meters (m3\text{m}^3)

  1. Identify the governing relationship: The relationship between density (ρ\rho), mass (mm), and volume (VV) is: ρ=mV  ⟹  V=mρ\rho = \frac{m}{V} \implies V = \frac{m}{\rho}
  2. Convert mass to the standard SI unit (kg\text{kg}): The given mass is in grams (g\text{g}), while the density is given in kilograms per cubic meter (kg/m3\text{kg}/\text{m}^3). To ensure unit consistency: m=4.15×10−4 g×1 kg103 g=4.15×10−7 kgm = 4.15 \times 10^{-4}\text{ g} \times \frac{1\text{ kg}}{10^3\text{ g}} = 4.15 \times 10^{-7}\text{ kg}
  3. Compute the volume: Substitute the mass and density into the rearranged formula: V=4.15×10−7 kg7.89×102 kg/m3V = \frac{4.15 \times 10^{-7}\text{ kg}}{7.89 \times 10^2\text{ kg}/\text{m}^3}

    Divide the coefficients and subtract the exponents: 4.157.89≈0.52598\frac{4.15}{7.89} \approx 0.52598 10−7÷102=10−7−2=10−910^{-7} \div 10^2 = 10^{-7 - 2} = 10^{-9} V=0.52598×10−9 m3=5.26×10−10 m3V = 0.52598 \times 10^{-9}\text{ m}^3 = 5.26 \times 10^{-10}\text{ m}^3

    Rounded to three significant figures, the volume is 5.26×10−10 m35.26 \times 10^{-10}\text{ m}^3.


Part (b): Determining if the Rupture Threshold is Exceeded

  1. Convert the volume to cubic centimeters (cm3\text{cm}^3) for direct comparison: Since 1 m=102 cm1\text{ m} = 10^2\text{ cm}, cubing both sides gives: 1 m3=(102 cm)3=106 cm31\text{ m}^3 = (10^2\text{ cm})^3 = 10^6\text{ cm}^3

    Multiply the calculated volume by this conversion factor: V=5.26×10−10 m3×106 cm31 m3=5.26×10−4 cm3V = 5.26 \times 10^{-10}\text{ m}^3 \times \frac{10^6\text{ cm}^3}{1\text{ m}^3} = 5.26 \times 10^{-4}\text{ cm}^3

  2. Compare with the critical threshold:

    • Capillary volume limit (VlimitV_{\text{limit}}): 5.00×10−4 cm35.00 \times 10^{-4}\text{ cm}^3
    • Solvent volume (VV): 5.26×10−4 cm35.26 \times 10^{-4}\text{ cm}^3

    Since 5.26×10−4 cm3>5.00×10−4 cm35.26 \times 10^{-4}\text{ cm}^3 > 5.00 \times 10^{-4}\text{ cm}^3, the volume of the injected solvent exceeds the capillary's internal physical rupture limit.

  • Pitfall to Avoid: When converting cubic units, remember to cube the linear conversion factor (e.g., (102)3=106(10^2)^3 = 10^6, not 10210^2). Failing to cube the unit factor leads to an error of several orders of magnitude.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the mass from grams to kilograms before dividing by density in kg/m³, resulting in a volume that is 1000 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=mρ  ⟹  V=4.15×10−47.89×102  ⟹  V=5.26×10−7 m3V = \frac{m}{\rho} \implies V = \frac{4.15 \times 10^{-4}}{7.89 \times 10^2} \implies V = 5.26 \times 10^{-7}\text{ m}^3

    Correct

    m=4.15×10−4 g×1 kg103 g=4.15×10−7 kg  ⟹  V=4.15×10−7 kg7.89×102 kg/m3=5.26×10−10 m3m = 4.15 \times 10^{-4}\text{ g} \times \frac{1\text{ kg}}{10^3\text{ g}} = 4.15 \times 10^{-7}\text{ kg} \implies V = \frac{4.15 \times 10^{-7}\text{ kg}}{7.89 \times 10^2\text{ kg}/\text{m}^3} = 5.26 \times 10^{-10}\text{ m}^3

    You set up the relationship V=mρV = \frac{m}{\rho} correctly, but the mass was provided in grams (g\text{g}) while the density was in kg/m3\text{kg}/\text{m}^3. You needed to convert grams to kilograms first, which introduces a factor of 10−310^{-3} and yields 5.26×10−10 m35.26 \times 10^{-10}\text{ m}^3.

  2. Step 2

    Vlimit=5.00×10−4 cm3=5.00×10−10 m3V_{\text{limit}} = 5.00 \times 10^{-4}\text{ cm}^3 = 5.00 \times 10^{-10}\text{ m}^3

  3. Step 3

    5.26×10−7 m3>5.00×10−10 m35.26 \times 10^{-7}\text{ m}^3 > 5.00 \times 10^{-10}\text{ m}^3, so it exceeds the threshold.

    Correct

    5.26×10−10 m3>5.00×10−10 m35.26 \times 10^{-10}\text{ m}^3 > 5.00 \times 10^{-10}\text{ m}^3, so it exceeds the threshold.

    Your comparison logic and final conclusion are correct, but the numerical value of the solvent volume was affected by the unconverted mass from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and rearranged the density formula as V=mρV = \frac{m}{\rho}.

You performed the unit conversion between cm3\text{cm}^3 and m3\text{m}^3 accurately by cubing the linear factor.

You carried out the scientific notation arithmetic correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass unit mismatch in density formula

You substituted mass in grams directly into a formula where density was given in kilograms per cubic meter.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit matching across compound physical quantities before substituting values into algebraic formulas.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Base SI Units
  • Before substituting into a formula involving a compound unit (such as kg/m3\text{kg}/\text{m}^3), every other quantity must match the base unit (convert g→kg\text{g} \to \text{kg}).

  • Always write down explicit units alongside numbers during the substitution step to ensure they cancel correctly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the mass from grams to kilograms: m=4.15×10−4 g=4.15×10−7 kgm = 4.15 \times 10^{-4}\text{ g} = 4.15 \times 10^{-7}\text{ kg}.

  2. Calculate the volume: V=4.15×10−7 kg7.89×102 kg/m3=5.26×10−10 m3V = \frac{4.15 \times 10^{-7}\text{ kg}}{7.89 \times 10^2\text{ kg}/\text{m}^3} = 5.26 \times 10^{-10}\text{ m}^3.

  3. Compare with the rupture limit: 5.26×10−10 m3>5.00×10−10 m35.26 \times 10^{-10}\text{ m}^3 > 5.00 \times 10^{-10}\text{ m}^3.

Final answer

(a) 5.26×10−10 m35.26 \times 10^{-10}\text{ m}^3; (b) Yes, the solvent volume exceeds the threshold.

NEXT STEPS
Final Takeaways from Your Teacher
  • Include units in your scratch work at every substitution step so mismatched units like g\text{g} versus kg\text{kg} are immediately noticeable.

  • Double-check derived values for physical plausibility when converting between metric prefixes.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the density formula by calculating volume as mass multiplied by density instead of mass divided by density.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=4.15×10−7 kgm = 4.15 \times 10^{-7}\text{ kg}

  2. Step 2

    V=m×ρ=(4.15×10−7 kg)×(7.89×102 kg/m3)  ⟹  V=3.27×10−4 m3V = m \times \rho = (4.15 \times 10^{-7}\text{ kg}) \times (7.89 \times 10^2\text{ kg}/\text{m}^3) \implies V = 3.27 \times 10^{-4}\text{ m}^3

    Correct

    V=mρ=4.15×10−7 kg7.89×102 kg/m3=5.26×10−10 m3V = \frac{m}{\rho} = \frac{4.15 \times 10^{-7}\text{ kg}}{7.89 \times 10^2\text{ kg}/\text{m}^3} = 5.26 \times 10^{-10}\text{ m}^3

    The definition of density is ρ=mV\rho = \frac{m}{V}, which rearranges algebraically to V=mρV = \frac{m}{\rho}. Multiplying mass by density yields units of kg2/m3\text{kg}^2/\text{m}^3 instead of volume.

  3. Step 3

    Vlimit=5.00×10−4 cm3=5.00×10−10 m3V_{\text{limit}} = 5.00 \times 10^{-4}\text{ cm}^3 = 5.00 \times 10^{-10}\text{ m}^3

  4. Step 4

    3.27×10−4 m3>5.00×10−10 m3, so it exceeds the threshold.3.27 \times 10^{-4}\text{ m}^3 > 5.00 \times 10^{-10}\text{ m}^3\text{, so it exceeds the threshold.}

    Correct

    5.26×10−10 m3>5.00×10−10 m3, so it exceeds the threshold.5.26 \times 10^{-10}\text{ m}^3 > 5.00 \times 10^{-10}\text{ m}^3\text{, so it exceeds the threshold.}

    Your qualitative conclusion is correct, but your comparison used the incorrect volume calculated in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the mass from grams to kilograms using scientific notation.

You accurately converted cubic centimeters to cubic meters by cubing the linear scale factor.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Rearrangement Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the relationship between mass, volume, and density by multiplying m×ρm \times \rho rather than isolating VV as mρ\frac{m}{\rho}. Tracking the units would reveal that kg×(kg/m3)=kg2/m3\text{kg} \times (\text{kg}/\text{m}^3) = \text{kg}^2/\text{m}^3, which does not equal cubic meters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Density Formula Manipulation
  • ρ=mV  ⟺  V=mρ  ⟺  m=ρ×V\rho = \frac{m}{V} \iff V = \frac{m}{\rho} \iff m = \rho \times V

  • Before calculating, isolate the target variable algebraically and verify that the units cancel to give the required dimension.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the relationship: ρ=mV  ⟹  V=mρ\rho = \frac{m}{V} \implies V = \frac{m}{\rho}.

  2. Substitute the values: V=4.15×10−7 kg7.89×102 kg/m3V = \frac{4.15 \times 10^{-7}\text{ kg}}{7.89 \times 10^2\text{ kg}/\text{m}^3}.

  3. Divide the mantissas and subtract exponents: 4.157.89×10−7−2≈0.526×10−9=5.26×10−10 m3\frac{4.15}{7.89} \times 10^{-7 - 2} \approx 0.526 \times 10^{-9} = 5.26 \times 10^{-10}\text{ m}^3.

  4. Compare with the limit: 5.26×10−10 m3>5.00×10−10 m35.26 \times 10^{-10}\text{ m}^3 > 5.00 \times 10^{-10}\text{ m}^3.

Final answer

(a) 5.26×10−10 m35.26 \times 10^{-10}\text{ m}^3; (b) Yes, the solvent volume exceeds the threshold.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the units alongside numbers during substitutions to check whether they cancel to the intended unit.

  • Practice isolating variables with triangle diagrams or inverse operations before plugging in scientific notation values.

OverviewACEpath Teacher's Diagnosis

03 The student uses a linear conversion factor of 10⁻² instead of (10⁻²)³ = 10⁻⁶ when converting cm³ to m³, concluding incorrectly that the volume does not exceed the threshold.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=4.15×10−7 kg  ⟹  V=mρ=4.15×10−7 kg7.89×102 kg/m3  ⟹  V=5.26×10−10 m3m = 4.15 \times 10^{-7}\text{ kg} \implies V = \frac{m}{\rho} = \frac{4.15 \times 10^{-7}\text{ kg}}{7.89 \times 10^2\text{ kg}/\text{m}^3} \implies V = 5.26 \times 10^{-10}\text{ m}^3

  2. Step 2

    Vlimit=5.00×10−4 cm3×10−2 m/cm=5.00×10−6 m3V_{\text{limit}} = 5.00 \times 10^{-4}\text{ cm}^3 \times 10^{-2}\text{ m}/\text{cm} = 5.00 \times 10^{-6}\text{ m}^3

    Correct

    Vlimit=5.00×10−4 cm3×(10−2 m/cm)3=5.00×10−10 m3V_{\text{limit}} = 5.00 \times 10^{-4}\text{ cm}^3 \times \left(10^{-2}\text{ m}/\text{cm}\right)^3 = 5.00 \times 10^{-10}\text{ m}^3

    When converting volume units, you must cube the linear conversion factor: (10−2 m/cm)3=10−6 m3/cm3(10^{-2}\text{ m}/\text{cm})^3 = 10^{-6}\text{ m}^3/\text{cm}^3. Multiplying by 10−210^{-2} leaves the units inconsistent.

  3. Step 3

    5.26×10−10 m3<5.00×10−6 m3, so it does not exceed the threshold.5.26 \times 10^{-10}\text{ m}^3 < 5.00 \times 10^{-6}\text{ m}^3\text{, so it does not exceed the threshold.}

    Correct

    5.26×10−10 m3>5.00×10−10 m3, so the solvent volume exceeds the threshold.5.26 \times 10^{-10}\text{ m}^3 > 5.00 \times 10^{-10}\text{ m}^3\text{, so the solvent volume exceeds the threshold.}

    Your comparison follows logically from your converted threshold value, but because the conversion was off by four orders of magnitude, your final conclusion was reversed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the solvent mass from grams to kilograms.

You correctly rearranged the density formula to solve for volume.

You calculated the solvent volume accurately in scientific notation with proper significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear Factor Applied to Cubic Unit Conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated a volume unit conversion as a one-dimensional linear conversion, multiplying by 10−2 m/cm10^{-2}\text{ m}/\text{cm} instead of (10−2 m/cm)3=10−6 m3/cm3(10^{-2}\text{ m}/\text{cm})^3 = 10^{-6}\text{ m}^3/\text{cm}^3.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cubing Derived Units
  • For any length-to-volume unit conversion where 1 cm=10−2 m1\text{ cm} = 10^{-2}\text{ m}, the volume conversion factor is (1 cm)3=(10−2 m)3=10−6 m3(1\text{ cm})^3 = (10^{-2}\text{ m})^3 = 10^{-6}\text{ m}^3.

  • Always write conversion factors with explicit parentheses around both the numerical value and the unit, such as (10−2 m1 cm)3\left(\frac{10^{-2}\text{ m}}{1\text{ cm}}\right)^3, before performing the arithmetic.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the cubed conversion factor: Vlimit=5.00×10−4 cm3×(10−2 m/cm)3=5.00×10−10 m3V_{\text{limit}} = 5.00 \times 10^{-4}\text{ cm}^3 \times \left(10^{-2}\text{ m}/\text{cm}\right)^3 = 5.00 \times 10^{-10}\text{ m}^3.

  2. Compare the solvent volume with the corrected limit: 5.26×10−10 m3>5.00×10−10 m35.26 \times 10^{-10}\text{ m}^3 > 5.00 \times 10^{-10}\text{ m}^3.

Final answer

Yes, the injected solvent volume exceeds the capillary volume rupture threshold.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting derived two-dimensional (area) and three-dimensional (volume) metric units by cubing or squaring conversion ratios.

  • Double-check dimensional consistency by ensuring that unit exponents cancel completely: cm3×m3cm3=m3\text{cm}^3 \times \frac{\text{m}^3}{\text{cm}^3} = \text{m}^3.

Lock it in

Similar question

01

A liquid has a density of 1.25×103 kg/m31.25 \times 10^3\text{ kg}/\text{m}^3. Calculate the volume in m3\text{m}^3 occupied by a 2.50×10−2 g2.50 \times 10^{-2}\text{ g} sample of this liquid.

Answer

2.00×10−8 m32.00 \times 10^{-8}\text{ m}^3. Key steps: convert mass to kilograms (m=2.50×10−5 kgm = 2.50 \times 10^{-5}\text{ kg}), then divide by density (V=2.50×10−5 kg1.25×103 kg/m3=2.00×10−8 m3V = \frac{2.50 \times 10^{-5}\text{ kg}}{1.25 \times 10^3\text{ kg}/\text{m}^3} = 2.00 \times 10^{-8}\text{ m}^3).

02

A micro-vial has a maximum capacity of 1.50×10−3 cm31.50 \times 10^{-3}\text{ cm}^3. A chemist injects 1.80×10−3 g1.80 \times 10^{-3}\text{ g} of acetone (density ρ=7.84×102 kg/m3\rho = 7.84 \times 10^2\text{ kg}/\text{m}^3). Determine the volume of the injected acetone in cm3\text{cm}^3 and state whether it overflows.

Answer

2.30×10−3 cm32.30 \times 10^{-3}\text{ cm}^3; yes, it overflows. Key steps: m=1.80×10−6 kgm = 1.80 \times 10^{-6}\text{ kg}; V=1.80×10−6 kg7.84×102 kg/m3=2.30×10−9 m3V = \frac{1.80 \times 10^{-6}\text{ kg}}{7.84 \times 10^2\text{ kg}/\text{m}^3} = 2.30 \times 10^{-9}\text{ m}^3; convert to cm3\text{cm}^3 by multiplying by 10610^6: V=2.30×10−3 cm3V = 2.30 \times 10^{-3}\text{ cm}^3; since 2.30×10−3>1.50×10−3 cm32.30 \times 10^{-3} > 1.50 \times 10^{-3}\text{ cm}^3, it overflows.

03

A sensor chamber requires an internal gas volume under 8.00×10−8 m38.00 \times 10^{-8}\text{ m}^3. A technician records a gas mass of 9.60×10−5 g9.60 \times 10^{-5}\text{ g} and a density of 1.20 kg/m31.20\text{ kg}/\text{m}^3. Express the gas volume in both m3\text{m}^3 and cm3\text{cm}^3, and determine whether it satisfies the volume requirement.

Answer

8.00×10−8 m3=0.0800 cm38.00 \times 10^{-8}\text{ m}^3 = 0.0800\text{ cm}^3; it is right at the threshold (does not strictly remain under 8.00×10−8 m38.00 \times 10^{-8}\text{ m}^3). Key steps: m=9.60×10−8 kgm = 9.60 \times 10^{-8}\text{ kg}; V=9.60×10−8 kg1.20 kg/m3=8.00×10−8 m3V = \frac{9.60 \times 10^{-8}\text{ kg}}{1.20\text{ kg}/\text{m}^3} = 8.00 \times 10^{-8}\text{ m}^3; conversion to cm3\text{cm}^3 yields 8.00×10−8×106=8.00×10−2 cm3=0.0800 cm38.00 \times 10^{-8} \times 10^6 = 8.00 \times 10^{-2}\text{ cm}^3 = 0.0800\text{ cm}^3.

Loading workspace…