Resources

A sample of helium gas in an expandable isobaric container is heated at a constant pressure of 1.00 atm1.00\text{ atm} from an initial unknown temperature T1T_1 to a final temperature of 85.0∘C85.0^\circ\text{C}. The gas expands from its initial volume V1V_1 to a final volume of 3.58 L3.58\text{ L}. A lab sensor recorded that the volume increased by exactly 40.0%40.0\% during this heating process. Determine the initial temperature T1T_1 in degrees Celsius (∘C^\circ\text{C}).

Answer and steps

Final answer

−17.2∘C-17.2^\circ\text{C}

Steps

01

Identify the Applicable Gas Law

The process occurs at a constant pressure of 1.00 atm1.00\text{ atm} in an expandable container. Under isobaric conditions, the relationship between the volume and absolute temperature of a gas is governed by Charles's Law:

V1T1=V2T2\frac{V_1}{T_1} = \frac{V_2}{T_2}

where temperatures must always be expressed on the absolute temperature scale (Kelvin).


02

Convert the Final Temperature to Kelvin

Add 273.15273.15 to the temperature in degrees Celsius:

T2=85.0∘C+273.15=358.15 KT_2 = 85.0^\circ\text{C} + 273.15 = 358.15\text{ K}


03

Determine the Initial Volume V1V_1

The problem states that the volume increased by 40.0%40.0\% to reach the final volume of V2=3.58 LV_2 = 3.58\text{ L}:

V2=V1⋅(1+0.400)=1.40⋅V1V_2 = V_1 \cdot (1 + 0.400) = 1.40 \cdot V_1

Solving for V1V_1:

V1=V21.40=3.58 L1.40≈2.56 LV_1 = \frac{V_2}{1.40} = \frac{3.58\text{ L}}{1.40} \approx 2.56\text{ L}


04

Calculate the Initial Absolute Temperature T1T_1

Rearrange Charles's Law to solve for T1T_1:

T1=T2⋅V1V2T_1 = T_2 \cdot \frac{V_1}{V_2}

Substitute the values:

T1=358.15 K⋅2.56 L3.58 L≈256.0 KT_1 = 358.15\text{ K} \cdot \frac{2.56\text{ L}}{3.58\text{ L}} \approx 256.0\text{ K}

(Common Pitfall: Applying Charles's Law directly with temperatures in degrees Celsius yields an incorrect ratio because Celsius is not an absolute temperature scale).


05

Convert T1T_1 to Degrees Celsius

Convert the Kelvin temperature back to Celsius:

T1=256.0 K−273.15=−17.15∘C≈−17.2∘CT_1 = 256.0\text{ K} - 273.15 = -17.15^\circ\text{C} \approx -17.2^\circ\text{C}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student performs Charles's law calculations directly using Celsius temperatures instead of converting to absolute temperature in Kelvin.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V2=1.40⋅V1  ⟹  V1=3.58/1.40=2.557 LV_2 = 1.40 \cdot V_1 \implies V_1 = 3.58 / 1.40 = 2.557\text{ L}

  2. Step 2

    V1/T1=V2/T2  ⟹  T1=T2⋅(V1/V2)=85.0/1.40V_1 / T_1 = V_2 / T_2 \implies T_1 = T_2 \cdot (V_1 / V_2) = 85.0 / 1.40

    Correct

    T2=85.0∘C+273.15=358.15 K  ⟹  T1=T2⋅V1V2=358.15 K1.40≈255.8 KT_2 = 85.0^\circ\text{C} + 273.15 = 358.15\text{ K} \implies T_1 = T_2 \cdot \frac{V_1}{V_2} = \frac{358.15\text{ K}}{1.40} \approx 255.8\text{ K}

    Charles's Law requires absolute temperature in Kelvin. You substituted 85.0∘C85.0^\circ\text{C} directly into the ratio rather than first converting it to Kelvin (358.15 K358.15\text{ K}).

  3. Step 3

    T1=60.7∘CT_1 = 60.7^\circ\text{C}

    Correct

    T1=255.8 K−273.15=−17.2∘CT_1 = 255.8\text{ K} - 273.15 = -17.2^\circ\text{C}

    This result follows directly from using the Celsius value in the preceding step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the final volume as 1.401.40 times the initial volume.

You accurately identified Charles's Law as the governing relationship at constant pressure.

You correctly isolated the unknown variable T1T_1 algebraically.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature scale error

You substituted temperature values directly in degrees Celsius rather than converting to Kelvin.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Gas laws derive from the kinetic theory of gases, where kinetic energy is directly proportional to absolute temperature. Because the Celsius scale has an arbitrary zero point rather than absolute zero, ratios of Celsius temperatures do not reflect proportional changes in gas volume or pressure.

REASONING PATH
Your ACEpath teacher’s suggested approach
Absolute Temperature Requirement
  • Always convert temperatures to Kelvin (T\text{ (K)} = T\text{ (^\circ$$C)} + 273.15) before inserting them into any ideal gas law formula.$$

  • Check whether every temperature variable in your gas law equation is expressed in Kelvin before performing multiplication or division.

Unit Conversion Sequence
  • Convert input temperatures to Kelvin first, solve the equation in Kelvin, and convert back to degrees Celsius only as the final step if requested.

  • Do not divide or multiply temperature values while they remain in degrees Celsius.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the final temperature to Kelvin: T2=85.0∘C+273.15=358.15 KT_2 = 85.0^\circ\text{C} + 273.15 = 358.15\text{ K}.

  2. Use the volume ratio from Charles's Law: T1=T2⋅V1V2=358.15 K1.40≈255.82 KT_1 = T_2 \cdot \frac{V_1}{V_2} = \frac{358.15\text{ K}}{1.40} \approx 255.82\text{ K}.

  3. Convert T1T_1 back to degrees Celsius: T1=255.82 K−273.15=−17.33∘C≈−17.2∘CT_1 = 255.82\text{ K} - 273.15 = -17.33^\circ\text{C} \approx -17.2^\circ\text{C}.

Final answer

−17.2∘C-17.2^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting given temperatures to Kelvin immediately upon reading a gas law problem.

  • Review why proportionality (V∝TV \propto T) fails when using the Celsius temperature scale.

  • Complete the follow-up practice exercises to reinforce two-way Kelvin-Celsius conversions.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets a 40.0% increase as meaning the final volume is 40.0% of the initial volume rather than 140.0%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T2=85.0+273.15=358.15 KT_2 = 85.0 + 273.15 = 358.15\text{ K}

  2. Step 2

    V2=0.400∗V1  ⟹  V1=3.58/0.400=8.95 LV_2 = 0.400 * V_1 \implies V_1 = 3.58 / 0.400 = 8.95\text{ L}

    Correct

    V2=V1(1+0.400)=1.400V1  ⟹  V1=3.58 L1.400≈2.56 LV_2 = V_1(1 + 0.400) = 1.400 V_1 \implies V_1 = \frac{3.58\text{ L}}{1.400} \approx 2.56\text{ L}

    An increase of 40.0%40.0\% means the final volume is V1+0.400V1=1.400V1V_1 + 0.400V_1 = 1.400V_1, not 0.400V10.400V_1. Setting V2=0.400V1V_2 = 0.400V_1 made the initial volume larger than the final volume, which contradicts an expanding gas.

  3. Step 3

    V1/T1=V2/T2  ⟹  T1=T2∗(V1/V2)=358.15∗(8.95/3.58)  ⟹  T1=358.15/0.400=895.38 KV_1/T_1 = V_2/T_2 \implies T_1 = T_2 * (V_1/V_2) = 358.15 * (8.95 / 3.58) \implies T_1 = 358.15 / 0.400 = 895.38\text{ K}

    Correct

    T1=T2⋅V1V2=358.15 K1.400≈255.82 KT_1 = T_2 \cdot \frac{V_1}{V_2} = \frac{358.15\text{ K}}{1.400} \approx 255.82\text{ K}

    Your algebraic rearrangement of Charles's Law was sound, but your calculation used the inverted volume ratio from Step 2.

  4. Step 4

    T1=895.38−273.15=622.2∘CT_1 = 895.38 - 273.15 = 622.2^\circ\text{C}

    Correct

    T1=255.82 K−273.15≈−17.2∘CT_1 = 255.82\text{ K} - 273.15 \approx -17.2^\circ\text{C}

    You converted back to Celsius correctly using your value from Step 3, but the final numerical value is affected by the earlier volume error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the given temperature from degrees Celsius to Kelvin before applying gas laws.

You selected Charles's Law for an isobaric process and rearranged the formula correctly to solve for initial temperature.

You correctly subtracted 273.15273.15 to express your final answer in degrees Celsius.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percentage Increase vs. Percentage Of

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You translated 'increased by 40.0%40.0\%' as 'is equal to 40.0%40.0\% of the original value' (V2=0.400V1V_2 = 0.400 V_1) instead of adding the percentage increase to the base value (V2=V1+0.400V1=1.400V1V_2 = V_1 + 0.400 V_1 = 1.400 V_1).

REASONING PATH
Your ACEpath teacher’s suggested approach
Translate Percentage Changes
  • A quantity XX increasing by p%p\% becomes Xfinal=Xinitial⋅(1+p100)X_{\text{final}} = X_{\text{initial}} \cdot (1 + \frac{p}{100}).

  • Whenever a problem says 'increased by p%p\%', write (1+p100)(1 + \frac{p}{100}) as the multiplier rather than just p100\frac{p}{100}.

Physical Reality Check
  • When a gas is heated at constant pressure, it expands (V2>V1V_2 > V_1).

  • Check whether your calculated V1V_1 (8.95 L8.95\text{ L}) is smaller than V2V_2 (3.58 L3.58\text{ L}). Since it was larger, the volume would have contracted upon heating, signaling an inverted relationship.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the 40.0%40.0\% volume expansion as V2=V1⋅(1+0.400)=1.400⋅V1V_2 = V_1 \cdot (1 + 0.400) = 1.400 \cdot V_1.

  2. Solve for the ratio V1V2=11.400\frac{V_1}{V_2} = \frac{1}{1.400}.

  3. Substitute into Charles's Law: T1=T2⋅V1V2=358.15 K1.400≈255.82 KT_1 = T_2 \cdot \frac{V_1}{V_2} = \frac{358.15\text{ K}}{1.400} \approx 255.82\text{ K}.

  4. Convert to degrees Celsius: T1=255.82 K−273.15=−17.33∘C≈−17.2∘CT_1 = 255.82\text{ K} - 273.15 = -17.33^\circ\text{C} \approx -17.2^\circ\text{C}.

Final answer

−17.2∘C-17.2^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting verbal statements like 'increases by x%x\%' versus 'decreases by x%x\%' into linear scale factors (1±x100)(1 \pm \frac{x}{100}).

  • Perform a qualitative sanity check before moving forward: heating a gas isobarically must increase its volume, so V1V_1 must be smaller than V2V_2.

OverviewACEpath Teacher's Diagnosis

03 The student treats the 40.0% increase in volume as a 40.0% decrease from the final volume by calculating V1 = 3.58 * (1 - 0.40) instead of dividing by 1.40.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T2=85.0+273.15=358.15 KT_2 = 85.0 + 273.15 = 358.15\text{ K}

  2. Step 2

    V1=3.58×(1−0.400)=3.58×0.600=2.148 LV_1 = 3.58 \times (1 - 0.400) = 3.58 \times 0.600 = 2.148\text{ L}

    Correct

    V2=V1(1+0.400)  ⟹  V1=3.58 L1.400≈2.557 LV_2 = V_1(1 + 0.400) \implies V_1 = \frac{3.58\text{ L}}{1.400} \approx 2.557\text{ L}

    A 40.0%40.0\% increase means the final volume is 140%140\% of the initial volume (V2=1.40V1V_2 = 1.40 V_1). To find V1V_1, you must divide V2V_2 by 1.401.40, rather than multiplying V2V_2 by (1−0.40)(1 - 0.40).

  3. Step 3

    V1T1=V2T2  ⟹  T1=T2×(V1V2)=358.15×(2.1483.58)=214.89 K\frac{V_1}{T_1} = \frac{V_2}{T_2} \implies T_1 = T_2 \times \left(\frac{V_1}{V_2}\right) = 358.15 \times \left(\frac{2.148}{3.58}\right) = 214.89\text{ K}

    Correct

    T1=T2×(V1V2)=358.15 K×(11.400)≈255.82 KT_1 = T_2 \times \left(\frac{V_1}{V_2}\right) = 358.15\text{ K} \times \left(\frac{1}{1.400}\right) \approx 255.82\text{ K}

    Your algebraic setup and use of Charles's Law were correct, but the result was affected by the earlier volume error.

  4. Step 4

    T1=214.89−273.15=−58.3∘CT_1 = 214.89 - 273.15 = -58.3^\circ\text{C}

    Correct

    T1=255.82 K−273.15=−17.33∘C≈−17.2∘CT_1 = 255.82\text{ K} - 273.15 = -17.33^\circ\text{C} \approx -17.2^\circ\text{C}

    You used the correct conversion back to Celsius, but the final value carries over the error from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted Celsius to Kelvin before substituting temperatures into Charles's Law.

You accurately identified Charles's Law for an isobaric process and rearranged it to solve for T1T_1.

You carried out the final conversion from Kelvin back to Celsius correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percentage Base Misattribution

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the base of a percentage change by subtracting 40%40\% from the final value instead of dividing the final value by (1+0.40)(1 + 0.40).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Base of a Percentage Change
  • When a quantity increases by p%p\%, the relationship between the old and new quantity is New=Old×(1+p100)\text{New} = \text{Old} \times (1 + \frac{p}{100}).

  • Always write the forward equation with the initial value as the base first, then solve for the unknown.

Reverse Percentage Calculation
  • To find an initial value after an increase, divide by the growth multiplier: Old=New1+p100\text{Old} = \frac{\text{New}}{1 + \frac{p}{100}}.

  • Never compute an earlier value by subtracting the percentage from the final value, because (1+r)(1−r)≠1(1 + r)(1 - r) \neq 1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the final volume in terms of the initial volume: V2=V1×(1+0.400)=1.400 V1V_2 = V_1 \times (1 + 0.400) = 1.400\,V_1.

  2. Substitute the ratio V1V2=11.400\frac{V_1}{V_2} = \frac{1}{1.400} directly into Charles's Law: T1=T2×V1V2=358.15 K1.400≈255.82 KT_1 = T_2 \times \frac{V_1}{V_2} = \frac{358.15\text{ K}}{1.400} \approx 255.82\text{ K}.

  3. Convert T1T_1 back to degrees Celsius: T1=255.82 K−273.15=−17.33∘C≈−17.2∘CT_1 = 255.82\text{ K} - 273.15 = -17.33^\circ\text{C} \approx -17.2^\circ\text{C}.

Final answer

−17.2∘C-17.2^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review reverse percentage calculations to avoid treating a percentage increase from an initial quantity as a percentage discount from a final quantity.

  • Notice that since V1V2=11.400\frac{V_1}{V_2} = \frac{1}{1.400}, you can substitute the ratio directly into Charles's Law without rounding intermediate volumes.

Lock it in

Similar question

01

A flexible balloon holds 1.50 L1.50\text{ L} of gas at 25.0∘C25.0^\circ\text{C}. If the gas is cooled at constant pressure until its volume contracts to 1.20 L1.20\text{ L}, what is the final temperature in ∘C^\circ\text{C}?

Answer

T2=−34.5∘CT_2 = -34.5^\circ\text{C}. Key steps: Convert T1=25.0+273.15=298.15 KT_1 = 25.0 + 273.15 = 298.15\text{ K}. Apply Charles's Law: T2=T1⋅V2V1=298.15⋅1.201.50=238.52 KT_2 = T_1 \cdot \frac{V_2}{V_1} = 298.15 \cdot \frac{1.20}{1.50} = 238.52\text{ K}. Convert to Celsius: 238.52−273.15=−34.6∘C238.52 - 273.15 = -34.6^\circ\text{C} (or −34.5∘C-34.5^\circ\text{C} using 273273).

02

An isobaric cylinder contains 500.0 mL500.0\text{ mL} of neon gas at −50.0∘C-50.0^\circ\text{C}. The gas is heated until its volume increases by 60.0%60.0\%. Determine the final temperature in degrees Celsius (∘C^\circ\text{C}).

Answer

T2=83.9∘CT_2 = 83.9^\circ\text{C}. Key steps: T1=−50.0+273.15=223.15 KT_1 = -50.0 + 273.15 = 223.15\text{ K}. A 60.0%60.0\% increase means V2V1=1.60\frac{V_2}{V_1} = 1.60. Apply Charles's Law: T2=T1⋅1.60=223.15×1.60=357.04 KT_2 = T_1 \cdot 1.60 = 223.15 \times 1.60 = 357.04\text{ K}. Convert back to Celsius: 357.04−273.15=83.89∘C≈83.9∘C357.04 - 273.15 = 83.89^\circ\text{C} \approx 83.9^\circ\text{C}.

03

A sample of nitrogen gas in a movable piston is cooled from 150.0∘C150.0^\circ\text{C} to a temperature where its volume decreases by exactly one-third at constant pressure. Determine the final temperature in degrees Celsius (∘C^\circ\text{C}).

Answer

T2=8.9∘CT_2 = 8.9^\circ\text{C}. Key steps: T1=150.0+273.15=423.15 KT_1 = 150.0 + 273.15 = 423.15\text{ K}. Decreasing by one-third means V2=23V1V_2 = \frac{2}{3}V_1, so V2V1=23\frac{V_2}{V_1} = \frac{2}{3}. Apply Charles's Law: T2=423.15 K×23=282.10 KT_2 = 423.15\text{ K} \times \frac{2}{3} = 282.10\text{ K}. Convert back to Celsius: 282.10−273.15=8.95∘C≈8.9∘C282.10 - 273.15 = 8.95^\circ\text{C} \approx 8.9^\circ\text{C}.

Loading workspace…