Resources

In a classic wet-chemical standardization titration, primary-standard solid sodium oxalate (Na2C2O4\text{Na}_2\text{C}_2\text{O}_4, molar mass 134.00 g/mol134.00\text{ g/mol}) is dissolved in dilute sulfuric acid and titrated at 60∘C60^\circ\text{C} with a potassium permanganate solution (KMnO4\text{KMnO}_4) of unknown concentration. The unbalanced molecular equation is: a Na2C2O4(aq)+b KMnO4(aq)+c H2SO4(aq)→d MnSO4(aq)+e K2SO4(aq)+f Na2SO4(aq)+g CO2(g)+h H2O(l)a\,\text{Na}_2\text{C}_2\text{O}_4(aq) + b\,\text{KMnO}_4(aq) + c\,\text{H}_2\text{SO}_4(aq) \rightarrow d\,\text{MnSO}_4(aq) + e\,\text{K}_2\text{SO}_4(aq) + f\,\text{Na}_2\text{SO}_4(aq) + g\,\text{CO}_2(g) + h\,\text{H}_2\text{O}(l) (a) Balance the complete molecular equation using the smallest whole-number coefficients. (b) If an analytical chemist weighs out 0.2010 g0.2010\text{ g} of pure Na2C2O4\text{Na}_2\text{C}_2\text{O}_4 and reaches the faint pink endpoint after delivering 24.85 mL24.85\text{ mL} of the KMnO4\text{KMnO}_4 titrant from a class-A buret, calculate the exact molarity of the potassium permanganate solution to four significant figures.

Answer and steps

Final answer

(a) 5Na2C2O4(aq)+2KMnO4(aq)+8H2SO4(aq)→2MnSO4(aq)+1K2SO4(aq)+5Na2SO4(aq)+10CO2(g)+8H2O(l)5\text{Na}_2\text{C}_2\text{O}_4(aq) + 2\text{KMnO}_4(aq) + 8\text{H}_2\text{SO}_4(aq) \rightarrow 2\text{MnSO}_4(aq) + 1\text{K}_2\text{SO}_4(aq) + 5\text{Na}_2\text{SO}_4(aq) + 10\text{CO}_2(g) + 8\text{H}_2\text{O}(l); (b) 0.02414 M0.02414\text{ M}

Steps

Part (a): Balancing the Molecular Redox Equation

To balance this oxidation-reduction reaction, we can use the ion-electron (half-reaction) method under acidic conditions and then recombine the ions with their spectator counter-ions.

  1. Identify the oxidation and reduction half-reactions:

    • Oxidation (Carbon): Oxalate ion (CX2OX4X2−\ce{C2O4^{2-}}) is oxidized to carbon dioxide (COX2\ce{CO2}). The oxidation state of carbon increases from +3+3 to +4+4: CX2OX4X2− →2 COX2+2 eX−\ce{C2O4^{2-} \rightarrow 2CO2 + 2e^-}
    • Reduction (Manganese): Permanganate ion (MnOX4X−\ce{MnO4^-}) is reduced to manganese(II) ion (MnX2+\ce{Mn^{2+}}). The oxidation state of manganese decreases from +7+7 to +2+2: MnOX4X−+8 HX++5 eX− →MnX2++4 HX2O\ce{MnO4^- + 8H^+ + 5e^- \rightarrow Mn^{2+} + 4H2O}
  2. Equalize the number of electrons transferred:

    • Multiply the oxidation half-reaction by 55 (10 e−10\text{ e}^- produced): 5CX2OX4X2− →10 COX2+10 eX−5\ce{C2O4^{2-} \rightarrow 10CO2 + 10e^-}
    • Multiply the reduction half-reaction by 22 (10 e−10\text{ e}^- consumed): 2MnOX4X−+16 HX++10 eX− →2 MnX2++8 HX2O2\ce{MnO4^- + 16H^+ + 10e^- \rightarrow 2Mn^{2+} + 8H2O}
  3. Combine the half-reactions to obtain the net ionic equation: 5CX2OX4X2−+2 MnOX4X−+16 HX+ →2 MnX2++10 COX2+8 HX2O5\ce{C2O4^{2-} + 2MnO4^- + 16H^+ \rightarrow 2Mn^{2+} + 10CO2 + 8H2O}
  4. Add spectator ions (NaX+\ce{Na+}, KX+\ce{K+}, and SOX4X2−\ce{SO4^{2-}}) to form neutral compounds:

    • 5CX2OX4X2−5\ce{C2O4^{2-}} pairs with 10NaX+10\ce{Na^+} to form 5NaX2CX2OX45\ce{Na2C2O4}.
    • 2MnOX4X−2\ce{MnO4^-} pairs with 2KX+2\ce{K^+} to form 2KMnOX42\ce{KMnO4}.
    • 16HX+16\ce{H^+} pairs with 8SOX4X2−8\ce{SO4^{2-}} to form 8HX2SOX48\ce{H2SO4}.
    • On the products side, distribute the cations with sulfate:
      • 2MnX2++2SOX4X2−→2MnSOX42\ce{Mn^{2+}} + 2\ce{SO4^{2-}} \rightarrow 2\ce{MnSO4}
      • 2KX++1SOX4X2−→1KX2SOX42\ce{K^+} + 1\ce{SO4^{2-}} \rightarrow 1\ce{K2SO4}
      • 10NaX++5SOX4X2−→5NaX2SOX410\ce{Na^+} + 5\ce{SO4^{2-}} \rightarrow 5\ce{Na2SO4}
      • Total sulfate ions consumed: 2+1+5=8SOX4X2−2 + 1 + 5 = 8\ce{SO4^{2-}}, which matches the reactants.

Thus, the balanced molecular equation is: 5NaX2CX2OX4(aq)+2KMnOX4(aq)+8HX2SOX4(aq)→2MnSOX4(aq)+1KX2SOX4(aq)+5NaX2SOX4(aq)+10COX2(g)+8HX2O(l)5\ce{Na2C2O4}(aq) + 2\ce{KMnO4}(aq) + 8\ce{H2SO4}(aq) \rightarrow 2\ce{MnSO4}(aq) + 1\ce{K2SO4}(aq) + 5\ce{Na2SO4}(aq) + 10\ce{CO2}(g) + 8\ce{H2O}(l)


Part (b): Calculating the Molarity of KMnOX4\ce{KMnO4}

  1. Calculate the moles of primary-standard sodium oxalate: Moles of NaX2CX2OX4=massmolar mass=0.2010 g134.00 g/mol=1.5000×10−3 mol\text{Moles of }\ce{Na2C2O4} = \frac{\text{mass}}{\text{molar mass}} = \frac{0.2010\text{ g}}{134.00\text{ g/mol}} = 1.5000 \times 10^{-3}\text{ mol}
  2. Determine the moles of KMnOX4\ce{KMnO4} using the stoichiometric ratio: From the balanced equation, 5 moles of NaX2CX2OX45\text{ moles of }\ce{Na2C2O4} react with 2 moles of KMnOX42\text{ moles of }\ce{KMnO4}: Moles of KMnOX4=1.5000×10−3 mol NaX2CX2OX4×2 mol KMnOX45 mol NaX2CX2OX4=6.0000×10−4 mol\text{Moles of }\ce{KMnO4} = 1.5000 \times 10^{-3}\text{ mol }\ce{Na2C2O4} \times \frac{2\text{ mol }\ce{KMnO4}}{5\text{ mol }\ce{Na2C2O4}} = 6.0000 \times 10^{-4}\text{ mol}

    Common Pitfall: Assuming a 1:11:1 stoichiometric ratio will lead to an incorrect molarity. Always check the mole ratio from the balanced redox equation.

  3. Calculate the molar concentration of the KMnOX4\ce{KMnO4} solution: Convert the delivered volume from milliliters to liters: V=24.85 mL=0.02485 LV = 24.85\text{ mL} = 0.02485\text{ L}

    Molarity (M)=moles of solutevolume of solution in L=6.0000×10−4 mol0.02485 L≈0.0241449 M\text{Molarity } (M) = \frac{\text{moles of solute}}{\text{volume of solution in L}} = \frac{6.0000 \times 10^{-4}\text{ mol}}{0.02485\text{ L}} \approx 0.0241449\text{ M}

Rounding to four significant figures gives 0.02414 M0.02414\text{ M}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the stoichiometric mole ratio as 5/2 instead of 2/5 when converting moles of oxalate to moles of permanganate, leading to an erroneously high molarity of 0.1509 M.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    5Na2C2O4+2KMnO4+8H2SO4→2MnSO4+K2SO4+5Na2SO4+10CO2+8H2O5\text{Na}_2\text{C}_2\text{O}_4 + 2\text{KMnO}_4 + 8\text{H}_2\text{SO}_4 \rightarrow 2\text{MnSO}_4 + \text{K}_2\text{SO}_4 + 5\text{Na}_2\text{SO}_4 + 10\text{CO}_2 + 8\text{H}_2\text{O}

  2. Step 2

    moles Na2C2O4=0.2010 g134.00 g/mol=0.001500 mol\text{moles }\text{Na}_2\text{C}_2\text{O}_4 = \frac{0.2010\text{ g}}{134.00\text{ g/mol}} = 0.001500\text{ mol}

  3. Step 3

    moles KMnO4=0.001500 mol×(52)=0.003750 mol\text{moles }\text{KMnO}_4 = 0.001500\text{ mol} \times \left(\frac{5}{2}\right) = 0.003750\text{ mol}

    Correct

    moles KMnO4=0.001500 mol Na2C2O4×2 mol KMnO45 mol Na2C2O4=6.0000×10−4 mol\text{moles }\text{KMnO}_4 = 0.001500\text{ mol }\text{Na}_2\text{C}_2\text{O}_4 \times \frac{2\text{ mol }\text{KMnO}_4}{5\text{ mol }\text{Na}_2\text{C}_2\text{O}_4} = 6.0000 \times 10^{-4}\text{ mol}

    You inverted the stoichiometric mole ratio. The balanced equation shows that 2 mol of KMnO42\text{ mol of }\text{KMnO}_4 react with 5 mol of Na2C2O45\text{ mol of }\text{Na}_2\text{C}_2\text{O}_4, so you must multiply by 25\frac{2}{5}, not 52\frac{5}{2}.

  4. Step 4

    Molarity=0.003750 mol0.02485 L=0.1509 M\text{Molarity} = \frac{0.003750\text{ mol}}{0.02485\text{ L}} = 0.1509\text{ M}

    Correct

    Molarity=6.0000×10−4 mol0.02485 L=0.02414 M\text{Molarity} = \frac{6.0000 \times 10^{-4}\text{ mol}}{0.02485\text{ L}} = 0.02414\text{ M}

    Your formula and volume conversion were correct, but the final numerical value was thrown off by the inverted mole count from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You balanced the complex molecular redox reaction completely and accurately.

You correctly converted the solid sample mass into moles using its molar mass.

You correctly set up the molarity relationship using the delivered titrant volume in liters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Stoichiometric Ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You placed the coefficient of the given reactant in the numerator and the desired substance in the denominator, rather than aligning units as moles desiredmoles given\frac{\text{moles desired}}{\text{moles given}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis for Stoichiometric Conversion
  • When converting from Substance A to Substance B, multiply by coefficient of Bcoefficient of A\frac{\text{coefficient of B}}{\text{coefficient of A}} so that mol A\text{mol A} cancels out.

  • Always write the chemical formulas and units inside the conversion factor: mol A×b mol Ba mol A=mol B\text{mol A} \times \frac{b\text{ mol B}}{a\text{ mol A}} = \text{mol B}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. moles KMnO4=0.001500 mol Na2C2O4×2 mol KMnO45 mol Na2C2O4=0.0006000 mol\text{moles }\text{KMnO}_4 = 0.001500\text{ mol }\text{Na}_2\text{C}_2\text{O}_4 \times \frac{2\text{ mol }\text{KMnO}_4}{5\text{ mol }\text{Na}_2\text{C}_2\text{O}_4} = 0.0006000\text{ mol}

  2. Molarity (M)=0.0006000 mol0.02485 L=0.0241449 M≈0.02414 M\text{Molarity } (M) = \frac{0.0006000\text{ mol}}{0.02485\text{ L}} = 0.0241449\text{ M} \approx 0.02414\text{ M}

Final answer

0.02414 M0.02414\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write explicit substance labels (like mol KMnO4\text{mol }\text{KMnO}_4 and mol Na2C2O4\text{mol }\text{Na}_2\text{C}_2\text{O}_4) on every conversion factor to ensure the starting units cancel.

  • Perform a quick sanity check: since 5 moles of oxalate5\text{ moles of oxalate} require only 2 moles of permanganate2\text{ moles of permanganate}, the moles of permanganate must be less than half the moles of oxalate.

OverviewACEpath Teacher's Diagnosis

02 The student assumes an equimolar 1:1 reaction stoichiometry between sodium oxalate and potassium permanganate, calculating a molarity of 0.06036 M.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    5NaX2CX2OX4+2KMnOX4+8HX2SOX4→2MnSOX4+KX2SOX4+5NaX2SOX4+10COX2+8HX2O5\ce{Na2C2O4} + 2\ce{KMnO4} + 8\ce{H2SO4} \rightarrow 2\ce{MnSO4} + \ce{K2SO4} + 5\ce{Na2SO4} + 10\ce{CO2} + 8\ce{H2O}

  2. Step 2

    moles NaX2CX2OX4=0.2010 g134.00 g/mol=0.001500 mol\text{moles }\ce{Na2C2O4} = \frac{0.2010\text{ g}}{134.00\text{ g/mol}} = 0.001500\text{ mol}

  3. Step 3

    moles KMnOX4=moles NaX2CX2OX4=0.001500 mol\text{moles }\ce{KMnO4} = \text{moles }\ce{Na2C2O4} = 0.001500\text{ mol}

    Correct

    moles KMnOX4=0.001500 mol NaX2CX2OX4×2 mol KMnOX45 mol NaX2CX2OX4=0.0006000 mol\text{moles }\ce{KMnO4} = 0.001500\text{ mol }\ce{Na2C2O4} \times \frac{2\text{ mol }\ce{KMnO4}}{5\text{ mol }\ce{Na2C2O4}} = 0.0006000\text{ mol}

    You set the moles of KMnOX4\ce{KMnO4} equal to the moles of NaX2CX2OX4\ce{Na2C2O4}, assuming a 1:11:1 ratio. According to your balanced equation, 2 moles of KMnOX42\text{ moles of }\ce{KMnO4} react with 5 moles of NaX2CX2OX45\text{ moles of }\ce{Na2C2O4}, so you must multiply by 25\frac{2}{5}.

  4. Step 4

    Molarity=0.001500 mol0.02485 L=0.06036 M\text{Molarity} = \frac{0.001500\text{ mol}}{0.02485\text{ L}} = 0.06036\text{ M}

    Correct

    Molarity=0.0006000 mol0.02485 L=0.02414 M\text{Molarity} = \frac{0.0006000\text{ mol}}{0.02485\text{ L}} = 0.02414\text{ M}

    You applied the molarity formula correctly and properly converted the volume to liters, but the numerical answer is incorrect due to the mole ratio error in the preceding step.

WHAT YOU DID WELL
Compliments from Your Teacher

You balanced the complex molecular redox equation with complete accuracy.

You calculated the moles of sodium oxalate correctly from its given mass and molar mass.

You correctly identified and applied the molarity definition using liters of titrant solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equimolar Titration Assumption

You equated the moles of titrant directly to the moles of primary standard instead of using the stoichiometric ratio from the balanced equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Defaulting to an equimolar (1:11:1) neutralization assumption commonly encountered in monoprotic acid-base titrations, forgetting to check the stoichiometric coefficients established in part (a).

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometric Mole Ratio Verification
  • In any titration stoichiometry problem, ntitrant=nanalyte×coefficient of titrantcoefficient of analyten_{\text{titrant}} = n_{\text{analyte}} \times \frac{\text{coefficient of titrant}}{\text{coefficient of analyte}}.

  • Before calculating concentration, locate both reactants in the balanced equation and write out the dimensional analysis conversion factor with explicit chemical formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Moles of KMnOX4=0.001500 mol NaX2CX2OX4×2 mol KMnOX45 mol NaX2CX2OX4=6.0000×10−4 mol\text{Moles of }\ce{KMnO4} = 0.001500\text{ mol }\ce{Na2C2O4} \times \frac{2\text{ mol }\ce{KMnO4}}{5\text{ mol }\ce{Na2C2O4}} = 6.0000 \times 10^{-4}\text{ mol}

  2. Molarity=6.0000×10−4 mol0.02485 L=0.0241449… M\text{Molarity} = \frac{6.0000 \times 10^{-4}\text{ mol}}{0.02485\text{ L}} = 0.0241449\dots\text{ M}

  3. Round to four significant figures based on the given data (0.2010 g0.2010\text{ g} and 24.85 mL24.85\text{ mL}).

Final answer

0.02414 M0.02414\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review redox titration problems where the stoichiometric ratio is non-1:1 (such as IX2/SX2OX3X2−\ce{I2}/\ce{S2O3^{2-}} or CrX2OX7X2−/FeX2+\ce{Cr2O7^{2-}}/\ce{Fe^{2+}}).

  • Always write units with explicit chemical species attached (e.g., mol KMnOX4\text{mol }\ce{KMnO4}) rather than generic 'moles' to ensure conversion factors are never skipped.

OverviewACEpath Teacher's Diagnosis

03 The student balances the equation by equating coefficients 1:1 without accounting for the electron transfer in the half-reactions, yielding an incorrectly balanced equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Na2C2O4+2KMnO4+4H2SO4→2MnSO4+K2SO4+Na2SO4+2CO2+4H2O\text{Na}_2\text{C}_2\text{O}_4 + 2\text{KMnO}_4 + 4\text{H}_2\text{SO}_4 \rightarrow 2\text{MnSO}_4 + \text{K}_2\text{SO}_4 + \text{Na}_2\text{SO}_4 + 2\text{CO}_2 + 4\text{H}_2\text{O}

    Correct

    5Na2C2O4+2KMnO4+8H2SO4→2MnSO4+K2SO4+5Na2SO4+10CO2+8H2O5\text{Na}_2\text{C}_2\text{O}_4 + 2\text{KMnO}_4 + 8\text{H}_2\text{SO}_4 \rightarrow 2\text{MnSO}_4 + \text{K}_2\text{SO}_4 + 5\text{Na}_2\text{SO}_4 + 10\text{CO}_2 + 8\text{H}_2\text{O}

    You balanced some atoms by inspection, but the reaction is an oxidation-reduction reaction that requires balancing electrons transferred. Oxalate (CX2OX4X2−\ce{C2O4^{2-}}) loses 2 e−2\text{ e}^- to form 2COX22\ce{CO2}, while permanganate (MnOX4X−\ce{MnO4^-}) gains 5 e−5\text{ e}^- to form MnX2+\ce{Mn^{2+}}. To equalize electron transfer at 10 e−10\text{ e}^-, you must multiply oxalate by 55 and permanganate by 22, giving a 5:25:2 reactant ratio rather than 1:21:2.

  2. Step 2

    moles Na2C2O4=0.2010 g134.00 g/mol=0.001500 mol\text{moles }\text{Na}_2\text{C}_2\text{O}_4 = \frac{0.2010\text{ g}}{134.00\text{ g/mol}} = 0.001500\text{ mol}

  3. Step 3

    moles KMnO4=0.001500 mol×(21)=0.003000 mol\text{moles }\text{KMnO}_4 = 0.001500\text{ mol} \times \left(\frac{2}{1}\right) = 0.003000\text{ mol}

    Correct

    moles KMnO4=0.001500 mol×(25)=0.0006000 mol\text{moles }\text{KMnO}_4 = 0.001500\text{ mol} \times \left(\frac{2}{5}\right) = 0.0006000\text{ mol}

    Your stoichiometric calculation followed your written equation's 2:12:1 ratio, but because the correctly balanced equation has a 2:52:5 ratio (2 mol KMnOX42\text{ mol }\ce{KMnO4} per 5 mol NaX2CX2OX45\text{ mol }\ce{Na2C2O4}), the correct amount of KMnOX4\ce{KMnO4} is 6.000×10−4 mol6.000 \times 10^{-4}\text{ mol}.

  4. Step 4

    Molarity=0.003000 mol0.02485 L=0.1207 M\text{Molarity} = \frac{0.003000\text{ mol}}{0.02485\text{ L}} = 0.1207\text{ M}

    Correct

    Molarity=0.0006000 mol0.02485 L=0.02414 M\text{Molarity} = \frac{0.0006000\text{ mol}}{0.02485\text{ L}} = 0.02414\text{ M}

    You applied the molarity definition correctly, but this value was altered by the earlier mole ratio error.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the moles of primary standard sodium oxalate accurately using the given molar mass.

You converted milliliters to liters correctly and applied the formula for molarity properly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unbalanced Redox Electron Transfer

You balanced the equation by simple inspection rather than using the half-reaction method, missing that total oxygen atoms (2828 on reactants vs. 2424 on products) and total electrons did not balance.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In complex redox reactions, balancing atoms alone often leads to an apparent match for some elements while violating conservation of charge/electrons. The half-reaction method ensures that oxidation and reduction electron exchanges match before combining into full molecular formulas.

REASONING PATH
Your ACEpath teacher’s suggested approach
Half-Reaction Electron Balance
  • Total electrons lost in oxidation must equal total electrons gained in reduction.

  • Separate the net ionic redox components into half-reactions (CX2OX4X2−→2 COX2+2 eX−\ce{C2O4^{2-} -> 2CO2 + 2e^-} and MnOX4X−+8 HX++5 eX−→MnX2++4 HX2O\ce{MnO4^- + 8H+ + 5e^- -> Mn^{2+} + 4H2O}), then multiply by integers (55 and 22) to equalize electrons at 10 e−10\text{ e}^-.

Stoichiometric Mole Ratio Verification
  • In titration stoichiometry, the conversion factor is coefficient of unknowncoefficient of standard\frac{\text{coefficient of unknown}}{\text{coefficient of standard}}.

  • Always verify that the mole ratio reflects the balanced equation coefficients: here, 2 mol KMnOX45 mol NaX2CX2OX4=25\frac{2\text{ mol }\ce{KMnO4}}{5\text{ mol }\ce{Na2C2O4}} = \frac{2}{5}, not 21\frac{2}{1}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the balanced mole ratio from part (a): 5 mol NaX2CX2OX4:2 mol KMnOX45\text{ mol }\ce{Na2C2O4} : 2\text{ mol }\ce{KMnO4}.

  2. moles KMnOX4=1.500×10−3 mol NaX2CX2OX4×2 mol KMnOX45 mol NaX2CX2OX4=6.000×10−4 mol\text{moles }\ce{KMnO4} = 1.500 \times 10^{-3}\text{ mol }\ce{Na2C2O4} \times \frac{2\text{ mol }\ce{KMnO4}}{5\text{ mol }\ce{Na2C2O4}} = 6.000 \times 10^{-4}\text{ mol}

  3. Molarity=6.000×10−4 mol0.02485 L=0.02414 M\text{Molarity} = \frac{6.000 \times 10^{-4}\text{ mol}}{0.02485\text{ L}} = 0.02414\text{ M}

Final answer

(a) 5Na2C2O4(aq)+2KMnO4(aq)+8H2SO4(aq)→2MnSO4(aq)+1K2SO4(aq)+5Na2SO4(aq)+10CO2(g)+8H2O(l)5\text{Na}_2\text{C}_2\text{O}_4(aq) + 2\text{KMnO}_4(aq) + 8\text{H}_2\text{SO}_4(aq) \rightarrow 2\text{MnSO}_4(aq) + 1\text{K}_2\text{SO}_4(aq) + 5\text{Na}_2\text{SO}_4(aq) + 10\text{CO}_2(g) + 8\text{H}_2\text{O}(l); (b) 0.02414 M0.02414\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the ion-electron (half-reaction) method for balancing redox equations in acidic solutions.

  • Practice counting oxidation numbers for carbon in oxalate and manganese in permanganate before attempting to balance.

  • Double-check all atom counts (especially oxygen) across both sides of the reaction after completing an inspection balance.

Lock it in

Similar question

01

A student titrates 0.1500 g0.1500\text{ g} of pure sodium oxalate (molar mass=134.00 g/mol\text{molar mass} = 134.00\text{ g/mol}) with a potassium permanganate solution according to the balanced equation 5Na2C2O4+2KMnO4+8H2SO4→2MnSO4+K2SO4+5Na2SO4+10CO2+8H2O5\text{Na}_2\text{C}_2\text{O}_4 + 2\text{KMnO}_4 + 8\text{H}_2\text{SO}_4 \rightarrow 2\text{MnSO}_4 + \text{K}_2\text{SO}_4 + 5\text{Na}_2\text{SO}_4 + 10\text{CO}_2 + 8\text{H}_2\text{O}. If the endpoint is reached at 18.50 mL18.50\text{ mL}, calculate the molarity of the KMnO4\text{KMnO}_4 solution to four significant figures.

Answer

Moles of Na2C2O4=0.1500 g134.00 g/mol=1.1194×10−3 mol\text{Moles of }\text{Na}_2\text{C}_2\text{O}_4 = \frac{0.1500\text{ g}}{134.00\text{ g/mol}} = 1.1194 \times 10^{-3}\text{ mol}. Moles of KMnO4=1.1194×10−3 mol×25=4.4776×10−4 mol\text{KMnO}_4 = 1.1194 \times 10^{-3}\text{ mol} \times \frac{2}{5} = 4.4776 \times 10^{-4}\text{ mol}. Molarity =4.4776×10−4 mol0.01850 L=0.02420 M= \frac{4.4776 \times 10^{-4}\text{ mol}}{0.01850\text{ L}} = 0.02420\text{ M}.

02

In an iodometric titration, hydrogen peroxide reacts with iodide in acid: H2O2+2I−+2H+→I2+2H2O\text{H}_2\text{O}_2 + 2\text{I}^- + 2\text{H}^+ \rightarrow \text{I}_2 + 2\text{H}_2\text{O}. The liberated iodine is titrated with sodium thiosulfate: I2+2S2O32−→2I−+S4O62−\text{I}_2 + 2\text{S}_2\text{O}_3^{2-} \rightarrow 2\text{I}^- + \text{S}_4\text{O}_6^{2-}. If 20.00 mL20.00\text{ mL} of H2O2\text{H}_2\text{O}_2 solution ultimately requires 32.40 mL32.40\text{ mL} of 0.1000 M Na2S2O30.1000\text{ M }\text{Na}_2\text{S}_2\text{O}_3, calculate the concentration of H2O2\text{H}_2\text{O}_2 in mol/L\text{mol/L}.

Answer

Moles of S2O32−=0.03240 L×0.1000 M=3.240×10−3 mol\text{Moles of }\text{S}_2\text{O}_3^{2-} = 0.03240\text{ L} \times 0.1000\text{ M} = 3.240 \times 10^{-3}\text{ mol}. From stoichiometry, 1 mol H2O2≡1 mol I2≡2 mol S2O32−1\text{ mol }\text{H}_2\text{O}_2 \equiv 1\text{ mol }\text{I}_2 \equiv 2\text{ mol }\text{S}_2\text{O}_3^{2-}, so moles of H2O2=3.240×10−3×12=1.620×10−3 mol\text{moles of }\text{H}_2\text{O}_2 = 3.240 \times 10^{-3} \times \frac{1}{2} = 1.620 \times 10^{-3}\text{ mol}. Concentration =1.620×10−3 mol0.02000 L=0.08100 M= \frac{1.620 \times 10^{-3}\text{ mol}}{0.02000\text{ L}} = 0.08100\text{ M}.

03

A 0.2800 g0.2800\text{ g} sample containing iron(II) sulfate is dissolved and titrated with 0.02000 M K2Cr2O70.02000\text{ M }\text{K}_2\text{Cr}_2\text{O}_7 in acidic solution according to: 6FeX2++CrX2OX7X2−+14HX+→6FeX3++2CrX3++7HX2O6\ce{Fe^{2+}} + \ce{Cr2O7^{2-}} + 14\ce{H^+} \rightarrow 6\ce{Fe^{3+}} + 2\ce{Cr^{3+}} + 7\ce{H2O}. If 15.25 mL15.25\text{ mL} of the dichromate titrant is consumed, calculate the mass of iron (atomic mass=55.845 g/mol\text{atomic mass} = 55.845\text{ g/mol}) in the sample and its mass percentage to four significant figures.

Answer

Moles of CrX2OX7X2−=0.01525 L×0.02000 M=3.050×10−4 mol\text{Moles of }\ce{Cr2O7^{2-}} = 0.01525\text{ L} \times 0.02000\text{ M} = 3.050 \times 10^{-4}\text{ mol}. Moles of FeX2+=3.050×10−4 mol×6 mol Fe2+1 mol Cr2O72−=1.830×10−3 mol\ce{Fe^{2+}} = 3.050 \times 10^{-4}\text{ mol} \times \frac{6\text{ mol Fe}^{2+}}{1\text{ mol Cr}_2\text{O}_7^{2-}} = 1.830 \times 10^{-3}\text{ mol}. Mass of Fe=1.830×10−3 mol×55.845 g/mol=0.1022 g\text{Mass of Fe} = 1.830 \times 10^{-3}\text{ mol} \times 55.845\text{ g/mol} = 0.1022\text{ g}. Mass %=0.1022 g0.2800 g×100%=36.50%\text{Mass \%} = \frac{0.1022\text{ g}}{0.2800\text{ g}} \times 100\% = 36.50\%.

Loading workspace…