Resources
A laboratory pressure cooker is equipped with a spring-loaded pressure relief valve calibrated to release steam once the internal gauge pressure exceeds (so the absolute pressure reaches ). The water inside is heated toward boiling. Given water's normal boiling point of and (), determine the exact critical threshold temperature in at which the liquid water begins boiling inside the cooker just as the relief valve reaches its triggering limit.
Answer and steps
Final answer
Steps
Identify the Boiling Condition and Thermodynamic Parameters
A liquid boils when its vapor pressure equals the surrounding pressure. Inside the pressure cooker, the pressure relief valve triggers when the internal gauge pressure exceeds .
- Total absolute pressure at boiling:
- Reference state (normal boiling point):
- Thermodynamic constants:
Apply the Clausius-Clapeyron Equation
The temperature dependence of vapor pressure is described by the integrated Clausius-Clapeyron equation:
Rearranging to solve for the reciprocal of the boiling temperature, :
Calculate the Boiling Temperature
Substitute the given numerical values into the equation:
- Evaluate the pressure ratio term:
- Evaluate the constant factor:
- Compute the difference:
- Solve for and convert to Celsius:
Common Pitfall to Avoid
- Gauge Pressure vs. Absolute Pressure: Always convert gauge pressure to absolute pressure before using thermodynamic relations (). Using instead of assumes no pressure increase above open-air conditions.
Typical errors
01 The student forgets to convert ΔHvap from kJ/mol to J/mol, leading to an inconsistency with the gas constant R and an unphysical temperature.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly selected the Clausius-Clapeyron equation and identified the absolute pressures. However, you substituted directly while using . The energy units must match, so must be converted to (or to ).
- Step 2Correct
Your algebraic isolation of was carried out consistently with your numbers, but the value is negative because the ratio was underestimated by a factor of .
- Step 3Correct
You correctly realized that an absolute temperature in Kelvin cannot be negative, but this was caused by the earlier unit mismatch rather than an insolvable problem.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the total absolute pressure inside the cooker is at the threshold.
You selected the correct integrated form of the Clausius-Clapeyron equation.
You astutely noted that a negative Kelvin temperature is physically impossible instead of blindly writing down a negative absolute temperature.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou did not reconcile the energy units between the heat of vaporization (given in ) and the ideal gas constant (given in ), leading to a pre-exponential factor that was off by three orders of magnitude.
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Harmony Check
Whenever thermodynamic equations involve both and the gas constant , both must share identical energy units (either both in or both in ).
Multiply by before substituting, or express as .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert to .
Evaluate the constant factor: .
Rearrange the Clausius-Clapeyron equation: .
Substitute the values: .
Invert to find : .
Convert to Celsius: .
02 The student uses the gauge pressure of 1.00 atm as the final pressure P2 instead of the absolute pressure of 2.00 atm, concluding that the boiling temperature does not change.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly identified the reference state for normal boiling, but you set equal to the gauge pressure alone () rather than calculating the total absolute pressure inside the vessel ().
- Step 2Correct
You chose the correct integrated Clausius-Clapeyron equation, but substituting caused the pressure ratio to evaluate to zero.
- Step 3Correct
You solved your resulting equation accurately, but because of the initial pressure value, your final temperature reflects an open container rather than a pressurized cooker.
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct thermodynamic equation (the integrated Clausius-Clapeyron equation) to relate vapor pressure and boiling temperature.
You used the correct standard boiling point of water ( at ) as your reference state.
You correctly managed unit conversions between Kelvin and Celsius.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the final pressure directly to the gauge pressure reading of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked that thermodynamic equations describing phase equilibria and gas behavior require absolute pressure (), not gauge pressure.
REASONING PATH
Your ACEpath teacher’s suggested approach- Gauge vs. Absolute Pressure
Always check whether a given pressure is 'gauge' or 'absolute'. If gauge pressure is specified, add local atmospheric pressure (typically or ) before inserting it into thermodynamic equations.
- Physical Reality Check for Pressure Cookers
Increasing pressure above a liquid increases its boiling point.
If your calculated boiling point inside a sealed, pressurized container equals the normal boiling point at , pause and verify that the internal pressure is strictly greater than .
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the pressure ratio:
Evaluate the constant factor:
Solve for :
Compute in Kelvin:
Convert to Celsius:
03 The student calculates the final boiling temperature correctly in Kelvin but forgets to convert it to degrees Celsius as requested.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You concluded your calculation in Kelvin, but the question specifically asked for the final threshold temperature in degrees Celsius ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the Clausius-Clapeyron equation governs the boiling point under elevated pressure.
You properly added atmospheric pressure to gauge pressure to obtain the correct absolute pressure of .
You converted to to match the gas constant and solved for in Kelvin without algebraic slips.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou solved for the correct thermodynamic temperature in Kelvin but forgot to convert it to degrees Celsius.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisThermodynamic formulas require temperature in Kelvin, leading you to treat the calculated value of as the completed final answer instead of verifying the target units requested by the problem prompt.
REASONING PATH
Your ACEpath teacher’s suggested approach- Temperature Unit Conversion Check
Always re-read the final sentence of the prompt before boxing your answer to confirm whether the question asks for Kelvin or degrees Celsius.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubtract to convert the boiling temperature from Kelvin to degrees Celsius:
Lock it in
In the Clausius-Clapeyron equation , what unit conversion is almost always required before computing ?
Convert from to (multiply by ), because the universal gas constant is typically given in .
Similar question
Ethanol has a normal boiling point of () and an enthalpy of vaporization . Calculate its vapor pressure in at (). Use .
Answer
. Key steps: ; ; ; .
An autoclave operates at a gauge pressure of (ambient atmospheric pressure is ). Water inside boils at this pressure. If water's normal boiling point is () at and , find the boiling temperature in .
Answer
. Key steps: ; ; ; (or to depending on intermediate rounding).
A certain volatile liquid boils at () under an external pressure of . When heated in a sealed vessel until the vapor pressure reaches , the liquid boils at (). Determine for this liquid in .
Answer
. Key steps: ; ; .