Resources
In a conductometric titration experiment, a student places of an unknown aqueous barium hydroxide solution () into a titration cell equipped with an immersion conductivity probe. The student titrates the analyte with standardized sulfuric acid (). The net ionic precipitation-neutralization reaction is: . The electrical conductivity drops to a sharp minimum of near zero at exactly of added , then rises steadily thereafter. (a) Calculate the initial molarity of the solution. (b) Explain why the conductivity reaches near zero at the equivalence point rather than remaining constant like a standard acid-base titration involving soluble salts.
Answer and steps
Final answer
(a) ; (b) The equivalence point achieves near-zero conductivity because both neutralization and precipitation occur simultaneously, removing virtually all mobile ions: and form neutral, non-ionized liquid , while and precipitate completely as insoluble solid crystalline (). At the equivalence point, the only charge carriers remaining are minuscule concentrations from the self-ionization of water and trace equilibrium dissolution of . Past equivalence, excess and reintroduce mobile charge carriers, driving conductivity back up.
Steps
Part (a): Determining the Initial Molarity of
Step 1: Write the balanced molecular equation
The neutralization and precipitation reaction between barium hydroxide and sulfuric acid is:
From the stoichiometry, one mole of reacts completely with one mole of :
Step 2: Calculate the moles of added at the equivalence point
Using the volume and molarity of the standardized :
Step 3: Calculate the concentration of the unknown
Because the stoichiometric ratio is , the moles of initially present equal the moles of consumed:
Divide by the initial volume of barium hydroxide ():
Common Pitfall: Do not double the moles when considering and . While each formula unit produces two hydroxide ions and two hydronium equivalents, both compounds donate two equivalents per mole, preserving the stoichiometric molar ratio between and .
Part (b): Conductivity Behavior at the Equivalence Point
Electrical conductivity in an aqueous solution requires mobile charged particles (ions) to carry electrical current:
-
Standard acid-base titration vs. this system:
- In a conventional titration such as , and combine to form water, but the spectator ions ( and ) remain dissolved and fully dissociated. As a result, the solution retains a substantial number of charge carriers, and conductivity remains distinctly above zero at the equivalence point.
- In the titration, both pairs of ions are removed from the solution phase simultaneously:
- The neutralization reaction converts mobile and into largely non-ionized, covalent liquid water ().
- The precipitation reaction binds the cations () and anions () into insoluble solid barium sulfate, , which leaves the solution as a precipitate ().
-
At the equivalence point:
- Virtually all dissolved ions are depleted. The only ions remaining are from the extremely small equilibrium dissociation of and the autoionization of water ().
- With essentially no mobile charge carriers left in solution, conductivity drops to near zero.
-
Past the equivalence point:
- Adding excess introduces unreacted, highly conductive free and ions into the cell, causing the conductivity to rise sharply and linearly again.
Typical errors
01 The student misapplies the 2:1 ratio of OH⁻ to H2SO4 formula units to the overall reaction, incorrectly halving the moles of Ba(OH)2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You divided the moles of by , but the balanced molecular equation is . Because each formula unit of provides two ions and each formula unit of provides two ions, the compounds react in an exact molar ratio.
- Step 3Correct
You applied the molarity formula correctly, but the result is half the true value because it carried forward the stoichiometric error from Step 2.
- Step 4
At the equivalence point, precipitates out of solution and is a neutral liquid, so all mobile ions are removed and conductivity approaches zero.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the moles of titrant delivered at the equivalence point.
You correctly divided moles by the initial volume to compute solution molarity.
You clearly explained the physical cause of near-zero conductivity by linking it to ion removal through precipitation and neutralization.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou saw the subscript in and halved the moles of barium hydroxide without balancing it against the diprotic nature of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the equivalence of individual reacting ions (two reacting with two ) with the stoichiometric mole ratio between the whole neutral compound formula units ($ : = 1 : 1$).
REASONING PATH
Your ACEpath teacher’s suggested approach- Molecular Equation Balancing
Always write and balance the complete formula-unit equation before setting up mole ratios: .
Check whether both the acid and base provide multiple protons/hydroxide ions per formula unit before multiplying or dividing by .
- Ion-Equivalent Sanity Check
and .
At complete equivalence, .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the mole ratio: .
Compute initial molarity: .
(a) ; (b) Near-zero conductivity occurs because both ions precipitate as solid and neutralize into non-ionized liquid , removing all mobile charge carriers from solution.
02 The student uses the total solution volume at the equivalence point instead of the initial volume of Ba(OH)2 when calculating initial molarity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
To find the initial concentration of the original solution before titration, you must divide by the initial sample volume (), not the total combined volume at the equivalence point ().
- Step 3
"The conductivity drops near zero because is insoluble and precipitates completely, while does not conduct electricity, removing all conducting ions."
WHAT YOU DID WELL
Compliments from Your TeacherYou accurately converted the titrant volume into liters and calculated the moles of reacted acid.
You recognized the stoichiometric relationship between and .
You correctly identified that the simultaneous precipitation of and formation of neutral remove mobile charge-carrying ions.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou summed the analyte and titrant volumes to get and used that as the denominator in the initial molarity formula.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the initial analyte solution volume with the total mixture volume at the equivalence point. An 'initial concentration' refers strictly to the solution state prior to the addition of any titrant.
REASONING PATH
Your ACEpath teacher’s suggested approach- Defining Initial Concentration
Initial molarity .
Always identify the original pipette or aliquot volume of the analyte and use only that volume when computing initial concentration.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the original volume of the barium hydroxide sample: .
Divide the moles of by the initial volume: .
(a) ; (b) Conductivity drops to near zero because precipitation of and neutralization to simultaneously remove virtually all mobile dissolved ions.
03 The student attributes the near-zero conductivity solely to pH neutralization forming neutral water, ignoring the precipitation of BaSO4.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
The conductivity reaches near zero because and neutralize each other to form pure neutral water with , which cannot conduct electric current.
CorrectConductivity reaches near zero because both neutralization and precipitation occur simultaneously: and form non-conducting , while the spectator ions and precipitate out as insoluble , removing virtually all mobile ions from the solution.
Neutralization accounts for the removal of and , but in a standard neutralization titration (such as with ), the solution still conducts electricity well at the equivalence point due to dissolved spectator ions ( and ). Here, the conductivity reaches near zero specifically because the counterions also precipitate out as solid , eliminating essentially all mobile charge carriers.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the moles of titrant added at the equivalence point.
You recognized the stoichiometric relationship between and .
You accurately computed the initial molarity of barium hydroxide as .
You identified that neutral liquid water does not conduct significant electrical current.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou explained conductivity solely through neutralization and pH without accounting for the presence or absence of spectator ions.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that achieving a neutral pH implies zero electrical conductivity, conflating solution neutrality with the absence of all mobile charge carriers. In aqueous solutions, electrical conductivity depends on the total concentration of all dissolved ions, not just and .
REASONING PATH
Your ACEpath teacher’s suggested approach- Conductivity Requires Mobile Ions
Aqueous electrical conductivity is proportional to the total concentration of all free, mobile ions present: .
Always list every ionic species present in solution before, at, and after the equivalence point.
- Distinguish Soluble from Insoluble Salts
Standard neutralizations produce soluble spectator ions that conduct current at equivalence. Only reactions that simultaneously precipitate both counterions remove conductivity completely.
Check solubility rules or values for the resulting salt to determine whether spectator ions remain dissolved in the supernatant.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify all ions originally introduced: , , , and .
Show how and react to form covalent .
Show how and combine to form insoluble crystalline .
State that the simultaneous removal of both the acidic/basic ions and the spectator ions leaves virtually no mobile charge carriers in solution at the equivalence point.
(a) ; (b) The conductivity drops to near zero because both neutralization () and precipitation () occur simultaneously, removing virtually all mobile dissolved ions from solution.
Lock it in
What is the stoichiometric molar ratio of to in a complete neutralization reaction?
The ratio is . Both compounds donate two reactive equivalents per mole ( and ), so one mole of reacts with exactly one mole of .
Similar question
A sample of aqueous is titrated to the conductometric equivalence point with of . Calculate the molar concentration of the solution.
Answer
. Key steps: is a mole ratio. Moles of acid . Therefore, .
A sample of requires of to reach the equivalence point. Calculate and state whether the conductivity at equivalence is near zero or moderately high.
Answer
, and conductivity remains moderately high. Key steps: The balanced equation is . Moles of . Moles of . Concentration . Because is soluble and completely dissociated into and , mobile ions remain, keeping conductivity well above zero.
A student titrates of with . (a) Write the balanced molecular equation for complete neutralization. (b) Calculate the volume of in required to reach the equivalence point.
Answer
(a) . (b) . Key steps: . From the ratio, . Volume .