Resources
An industrial electroplating bath deposits nickel metal onto automotive parts from a electrolyte solution according to the reduction half-reaction . If a cathode specification requires depositing exactly of pure nickel (molar mass ) over a fixed operating duration of at cathodic efficiency, what constant electrical current (in amperes) must be supplied to the electrolytic cell? Use .
Answer and steps
Final answer
Steps
Calculate the moles of nickel metal required
To determine the constant electric current needed to deposit the required mass of nickel, we apply Faraday's laws of electrolysis in a step-by-step sequence.
Using the given mass () and molar mass () of nickel:
Determine the moles of electrons transferred
From the balanced reduction half-reaction at the cathode:
Each mole of solid nickel deposited requires of electrons ():
Compute the total electrical charge ()
Using Faraday's constant (), find the total charge needed:
Convert time to seconds and solve for current ()
A common pitfall is forgetting to convert the plating duration from hours to seconds before calculating current in amperes ():
Since current is the rate of charge flow ():
Rounding to three significant figures gives:
Typical errors
01 The student forgets to multiply by the stoichiometric factor of 2 electrons per nickel atom in the reduction half-reaction, calculating half the required charge and current.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You omitted the number of electrons transferred per nickel ion (). The reduction reaction requires for every mole of nickel deposited.
- Step 3
- Step 4Correct
You correctly divided charge by time, but your result was affected by the missing factor of in the charge calculation.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the molar quantity of nickel from the given mass.
You converted the operating time from hours into seconds correctly.
You correctly applied the relationship between charge, current, and time.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set the moles of electrons equal to the moles of nickel instead of multiplying by .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the stoichiometric electron-to-metal ratio () from the balanced half-reaction when relating the substance amount to total charge via Faraday's law ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the half-reaction for valence electrons
Every mole of an ion requires moles of electrons to reduce to solid .
Always write out explicitly before using Faraday's constant.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind moles of electrons transferred: .
Calculate the required charge: .
Compute the required current: .
02 The student uses the operating time in hours instead of converting it to seconds, leading to a current that is 3600 times too large.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You divided charge by hours instead of seconds. An ampere is defined as coulombs per second (), so you must convert to before dividing.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the amount of nickel in moles using its molar mass.
You correctly identified the 2-electron transfer from the half-reaction to find the moles of electrons.
You applied Faraday's constant correctly to find the total charge in coulombs.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided the total charge directly by without converting the operating time to seconds.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked the SI base definition of the ampere as coulombs per second (), which requires all electrolysis time values in to be expressed in seconds.
REASONING PATH
Your ACEpath teacher’s suggested approach- Definition of an Ampere
Whenever a problem asks for current in amperes, immediately check that time is expressed in seconds before evaluating .
- Time Conversion Check
Write out the unit cancellation explicitly: .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the plating duration from hours to seconds: .
Calculate the current in amperes using : .
Round to three significant figures to match the given data (, ).
03 The student converts time to minutes (120 s) instead of seconds by multiplying hours by 60 only once.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You multiplied the time in hours by only once, which converts hours to minutes rather than seconds. Since , the time should be .
- Step 5Correct
You used the correct relationship , but substituting the incorrect time of yielded an inflated current.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the moles of nickel from the given mass and molar mass.
You accurately identified the per stoichiometric factor from the half-reaction.
You applied Faraday's constant correctly to determine the total required charge in coulombs.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote after calculating , confusing minutes with seconds.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIncomplete dimensional analysis when converting time units. An ampere is defined as one coulomb per second (), which requires converting hours through both minutes and seconds (). Multiplying by only once leaves the time in minutes.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define the Ampere in Base Units
Whenever solving for current or using , verify that time is explicitly expressed in seconds before dividing.
- Two-Step Time Conversion
Write out full conversion factors with cancelling units: .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert hours to seconds: .
Calculate current using : .
Round to three significant figures to match the given data: .
Lock it in
What does Faraday's law state relating electrical charge () to the moles of reduced substance ()?
, where is the number of moles of electrons transferred per mole of product.
Similar question
How much charge in coulombs is required to deposit of silver metal from an aqueous solution? ()
Answer
. For , . Total charge , or to three significant figures.
An electroplating cell deposits of aluminium (molar mass ) from a molten salt bath in . Assuming current efficiency, calculate the required current in amperes.
Answer
. Moles of . Each takes (), so . Total charge . Time . Current .
A current of is passed through an aqueous chromium plating solution containing where chromium is reduced from to metallic (). If the plating efficiency is , what mass of chromium (molar mass ) is deposited in ?
Answer
. Total charge delivered . Effective charge . Moles of electrons . Since , . Mass of .