Resources

Steam at 100.0∘C100.0^\circ\text{C} is allowed to condense into liquid water on the cool inner coil of a heat exchanger at constant pressure. During this process, 5.00 mol5.00\text{ mol} of water undergoes phase change. Given that the molar enthalpy of vaporization of water is ΔHvap=+40.7 kJ/mol\Delta H_{\text{vap}} = +40.7\text{ kJ/mol}, calculate the heat of condensation qcondq_{\text{cond}} for the system in kJ\text{kJ}, applying the proper thermodynamic sign convention. Based on the sign, state whether condensation releases heat to or absorbs heat from the surroundings.

Answer and steps

Final answer

qcond=−204 kJq_{\text{cond}} = -204\text{ kJ}; Condensation is exothermic and releases heat to the surroundings.

Steps

01

Relate Enthalpy of Condensation to Enthalpy of Vaporization

Phase changes occur at constant temperature and pressure. Vaporization (liquid to gas) and condensation (gas to liquid) are reverse physical processes:

HX2O(l)→HX2O(g)ΔHvap=+40.7 kJ/mol\ce{H2O(l) -> H2O(g)} \quad \Delta H_{\text{vap}} = +40.7\text{ kJ/mol}

Because condensation is the exact reverse of vaporization, its molar enthalpy change has the same magnitude but the opposite sign:

ΔHcond=−ΔHvap=−40.7 kJ/mol\Delta H_{\text{cond}} = -\Delta H_{\text{vap}} = -40.7\text{ kJ/mol}


02

Calculate the Heat of Condensation (qcondq_{\text{cond}})

At constant pressure, the heat transferred during a phase change is given by:

q=n⋅ΔHq = n \cdot \Delta H

Substitute the given amount of substance (n=5.00 moln = 5.00\text{ mol}) and the molar enthalpy of condensation:

qcond=5.00 mol⋅(−40.7 kJ/mol)=−203.5 kJq_{\text{cond}} = 5.00\text{ mol} \cdot (-40.7\text{ kJ/mol}) = -203.5\text{ kJ}

Rounding to three significant figures gives:

qcond=−204 kJq_{\text{cond}} = -204\text{ kJ}


03

Interpret the Thermodynamic Sign

  • Sign convention: A negative heat value (q<0q < 0) indicates that thermal energy leaves the thermodynamic system.
  • Process classification: Because energy flows out of the water (system) into the coil (surroundings), condensation is an exothermic process that releases heat to the surroundings.

Common Pitfall: Forgetting to flip the sign of ΔHvap\Delta H_{\text{vap}} when dealing with condensation. Vaporization requires energy input (endothermic, +40.7 kJ/mol+40.7\text{ kJ/mol}), whereas condensation releases that same amount of energy (exothermic, −40.7 kJ/mol-40.7\text{ kJ/mol}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that condensation is the reverse of vaporization and uses ΔH_vap directly without reversing the sign, concluding that heat is absorbed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    qcond=n⋅ΔHvap  ⟹  qcond=5.00 mol⋅40.7 kJ/mol=+204 kJq_{\text{cond}} = n \cdot \Delta H_{\text{vap}} \implies q_{\text{cond}} = 5.00\text{ mol} \cdot 40.7\text{ kJ/mol} = +204\text{ kJ}

    Correct

    qcond=n⋅ΔHcond=n⋅(−ΔHvap)=5.00 mol⋅(−40.7 kJ/mol)=−204 kJq_{\text{cond}} = n \cdot \Delta H_{\text{cond}} = n \cdot (-\Delta H_{\text{vap}}) = 5.00\text{ mol} \cdot (-40.7\text{ kJ/mol}) = -204\text{ kJ}

    Condensation (gas to liquid) is the reverse process of vaporization (liquid to gas). Since vaporization requires energy input (ΔHvap=+40.7 kJ/mol\Delta H_{\text{vap}} = +40.7\text{ kJ/mol}), condensation releases that same amount of energy, so ΔHcond=−ΔHvap=−40.7 kJ/mol\Delta H_{\text{cond}} = -\Delta H_{\text{vap}} = -40.7\text{ kJ/mol}.

  2. Step 2

    "Because qcondq_{\text{cond}} is positive, condensation absorbs heat from the surroundings."

    Correct

    "Because qcondq_{\text{cond}} is negative (qcond<0q_{\text{cond}} < 0), condensation is exothermic and releases heat to the surroundings."

    Your conceptual link between the sign of qq and energy direction was logically consistent with your calculated positive sign, but because the true value of qcondq_{\text{cond}} is negative, heat leaves the system and is released to the surroundings.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the formula relating heat to moles and molar enthalpy change (q=n⋅ΔHq = n \cdot \Delta H).

You performed the multiplication and rounded to three significant figures accurately (5.00×40.7=203.5≈2045.00 \times 40.7 = 203.5 \approx 204).

You recognized that the sign of qq determines whether heat is absorbed or released.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of sign inversion for reverse phase transition

You substituted the given positive value of ΔHvap\Delta H_{\text{vap}} directly without flipping its sign to represent condensation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the enthalpy value of vaporization as interchangeable with condensation, overlooking that reverse phase transitions are equal in magnitude but opposite in sign according to the first law of thermodynamics (Hess's law principle).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reverse Phase Change Sign Rule
  • For any reverse phase transition, ΔHreverse=−ΔHforward\Delta H_{\text{reverse}} = -\Delta H_{\text{forward}}. Specifically, ΔHcond=−ΔHvap\Delta H_{\text{cond}} = -\Delta H_{\text{vap}} and ΔHfreeze=−ΔHfusion\Delta H_{\text{freeze}} = -\Delta H_{\text{fusion}}.

  • Always identify the direction of the phase change: bond/IMF breaking requires heat (++, endothermic), while bond/IMF forming releases heat (−-, exothermic).

Thermodynamic Direction Check
  • q<0q < 0 means heat is released (exothermic); q>0q > 0 means heat is absorbed (endothermic).

  • Perform a physical reality check: steam condensing onto a cool coil releases heat into the coil, warming the coil and cooling the steam, so qq for the steam must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the relationship between condensation and vaporization: ΔHcond=−ΔHvap=−40.7 kJ/mol\Delta H_{\text{cond}} = -\Delta H_{\text{vap}} = -40.7\text{ kJ/mol}.

  2. Calculate the heat transferred: qcond=5.00 mol×(−40.7 kJ/mol)=−203.5 kJq_{\text{cond}} = 5.00\text{ mol} \times (-40.7\text{ kJ/mol}) = -203.5\text{ kJ}.

  3. Round to three significant figures: qcond=−204 kJq_{\text{cond}} = -204\text{ kJ}.

  4. Interpret the negative sign: since q<0q < 0, the process is exothermic and releases heat to the surroundings.

Final answer

qcond=−204 kJq_{\text{cond}} = -204\text{ kJ}; Condensation is exothermic and releases heat to the surroundings.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the signs of enthalpy changes for all six phase transitions: melting/vaporization/sublimation are endothermic (++), while freezing/condensation/deposition are exothermic (−-).

  • Practice checking whether intermolecular attractions are being formed or disrupted before assigning signs to ΔH\Delta H.

OverviewACEpath Teacher's Diagnosis

02 The student correctly calculates a negative heat of condensation but confuses the thermodynamic sign convention, misinterpreting a negative heat as absorption from surroundings.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔHcond=−ΔHvap=−40.7 kJ/mol\Delta H_{\text{cond}} = -\Delta H_{\text{vap}} = -40.7\text{ kJ/mol}

  2. Step 2

    qcond=5.00 mol∗(−40.7 kJ/mol)=−203.5 kJ  ⟹  qcond=−204 kJq_{\text{cond}} = 5.00\text{ mol} * (-40.7\text{ kJ/mol}) = -203.5\text{ kJ} \implies q_{\text{cond}} = -204\text{ kJ}

  3. Step 3

    Because qcondq_{\text{cond}} is negative, condensation absorbs heat from the surroundings.

    Correct

    Because qcond<0q_{\text{cond}} < 0, the process is exothermic and releases heat to the surroundings.

    By thermodynamic sign convention, energy transferred from the system to the surroundings carries a negative sign (q<0q < 0). Therefore, a negative heat indicates heat release to the surroundings, not absorption.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that condensation and vaporization have opposite signs.

You accurately calculated the total heat released using q=n⋅ΔHq = n \cdot \Delta H.

You followed standard rules for rounding to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Thermodynamic sign convention confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated a negative value of heat (q<0q < 0) with energy intake or deficiency rather than energy exit from the system perspective.

REASONING PATH
Your ACEpath teacher’s suggested approach
System-Centric Sign Convention
  • q>0q > 0 means heat enters the system (endothermic, absorbed from surroundings); q<0q < 0 means heat leaves the system (exothermic, released to surroundings).

  • Always evaluate qq from the perspective of the system: if the system loses thermal energy to form liquid intermolecular attractions, heat is being dumped into the surroundings.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. In thermodynamics, all heat flows are defined relative to the system: qsystem<0q_{\text{system}} < 0 indicates thermal energy flowing out of the system.

  2. Since qcond=−204 kJq_{\text{cond}} = -204\text{ kJ}, the condensation of water is an exothermic process.

  3. Therefore, the system releases 204 kJ204\text{ kJ} of heat to the surroundings.

Final answer

qcond=−204 kJq_{\text{cond}} = -204\text{ kJ}; condensation is exothermic and releases heat to the surroundings.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the system-versus-surroundings convention for internal energy and enthalpy changes.

  • Practice identifying whether intermolecular forces are being formed (releasing heat, q<0q < 0) or broken (requiring heat, q>0q > 0) for every phase transition.

Lock it in

Similar question

01

A 3.50 mol3.50\text{ mol} sample of ethanol vapor condenses at its normal boiling point. Given that ΔHvap=+38.6 kJ/mol\Delta H_{\text{vap}} = +38.6\text{ kJ/mol} for ethanol, calculate the heat transferred (qq) and state whether heat is absorbed or released by the ethanol.

Answer

q=n⋅(−ΔHvap)=3.50 mol×(−38.6 kJ/mol)=−135 kJq = n \cdot (-\Delta H_{\text{vap}}) = 3.50\text{ mol} \times (-38.6\text{ kJ/mol}) = -135\text{ kJ}. Heat is released to the surroundings.

02

During an industrial cooling process, 72.0 g72.0\text{ g} of liquid water freezes into ice at 0.0∘C0.0^\circ\text{C}. Given that the molar mass of water is 18.02 g/mol18.02\text{ g/mol} and ΔHfus=+6.01 kJ/mol\Delta H_{\text{fus}} = +6.01\text{ kJ/mol}, determine qq for the water in kJ\text{kJ} and classify the process as endothermic or exothermic.

Answer

n=72.0 g18.02 g/mol=3.996 moln = \frac{72.0\text{ g}}{18.02\text{ g/mol}} = 3.996\text{ mol}. Freezing is the reverse of fusion: ΔHfreeze=−6.01 kJ/mol\Delta H_{\text{freeze}} = -6.01\text{ kJ/mol}. Thus, q=3.996 mol×(−6.01 kJ/mol)=−24.0 kJq = 3.996\text{ mol} \times (-6.01\text{ kJ/mol}) = -24.0\text{ kJ}. The process is exothermic.

03

A block of solid carbon dioxide (dry ice) sublimes directly into gas at constant pressure, with ΔHsub=+25.2 kJ/mol\Delta H_{\text{sub}} = +25.2\text{ kJ/mol}. Later, gaseous CO2\text{CO}_2 undergoes deposition onto a cold plate to form solid dry ice, transferring 126 kJ126\text{ kJ} of heat out of the system. Calculate the amount of CO2\text{CO}_2 (in moles) that deposited, applying proper signs to your calculation.

Answer

Deposition is the reverse of sublimation: ΔHdep=−ΔHsub=−25.2 kJ/mol\Delta H_{\text{dep}} = -\Delta H_{\text{sub}} = -25.2\text{ kJ/mol}. Since heat is released, q=−126 kJq = -126\text{ kJ}. Using q=n⋅ΔHdepq = n \cdot \Delta H_{\text{dep}} gives n=−126 kJ−25.2 kJ/mol=5.00 moln = \frac{-126\text{ kJ}}{-25.2\text{ kJ/mol}} = 5.00\text{ mol}.

Loading workspace…