Resources
An ideal gas contained within a piston-cylinder assembly absorbs of heat from its surroundings while expanding quasi-statically against a constant external pressure of . If the internal energy of the gas increases by , calculate the final volume of the gas, , given that its initial volume was . Use the conversion factor .
Answer and steps
Final answer
Steps
Step 1: Apply the First Law of Thermodynamics
The first law of thermodynamics relates the change in internal energy () of a system to heat () and work ():
According to standard sign conventions:
- Heat absorbed by the system is positive: .
- An increase in internal energy is positive: .
Substitute these values to solve for the work done on or by the gas:
The negative sign confirms that work is done by the expanding gas on the surroundings.
Step 2: Relate Pressure-Volume Work to Volume Change
For an expansion against a constant external pressure (), pressure-volume work is defined as:
Substitute and :
Convert the units using :
Common Pitfall: Forgetting to convert to Joules (or vice versa) is a frequent source of error. Always ensure that the units of energy in the work equation match before adding or dividing.
Step 3: Calculate the Final Volume
The change in volume is defined as the difference between the final and initial volume:
Substitute the initial volume :
Typical errors
01 The student calculates the change in volume correctly but forgets to add the initial volume, reporting the volume change as the final volume.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You set the final volume equal to the change in volume, but the problem states an initial volume of . The final volume must be the sum of the initial volume and the expansion.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the First Law of Thermodynamics with proper sign conventions for heat and internal energy.
You successfully set up the pressure-volume work equation and converted units using to find .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou stopped calculating after finding and labeled it as .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating a change in a thermodynamic state variable () with the absolute final state value ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Change vs. Final State
Whenever a question asks for a final state variable like or , verify whether your calculated value represents the total quantity or just the change.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the relationship between volume change, initial volume, and final volume: .
Substitute and : .
02 The student neglects the conversion factor between Joules and liter-atmospheres, directly dividing energy in Joules by pressure in atmospheres.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You divided energy in Joules directly by pressure in atmospheres without converting units. Because , the product has units of , which must be converted to Joules before equating with work in Joules.
- Step 3Correct
You applied the correct definition , but the result was affected by the incorrect value of from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the First Law of Thermodynamics .
You correctly assigned positive signs to heat absorbed and internal energy gained.
You correctly identified the constant-pressure work formula .
You correctly added the initial volume to the calculated volume change.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual dimensional analysis oversight rather than a simple transcription or arithmetic slip.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou equated mechanical work in Joules () directly to the pressure-volume product in atmosphere-liters () without applying the conversion factor .
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Consistency Check
In thermodynamics, whenever mechanical work is combined with energy in Joules, convert pressure-volume units: .
Always write explicit units inside your fraction: .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the pressure to an energy equivalent per liter: .
Solve for volume change: .
Add the volume change to the initial volume: .
03 The student incorrectly adds heat to the internal energy change to find work, setting W = ΔU + Q = 640 J.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The First Law of Thermodynamics states that . Rearranging for work gives . By adding heat to internal energy (), you obtained instead of .
- Step 2Correct
Your algebra and unit conversion factor () were applied correctly, but the resulting volume change was affected by the incorrect value of work from Step 1.
- Step 3Correct
You correctly added your calculated to the initial volume , but the final answer carries over the error from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly assigned positive signs to heat absorbed () and internal energy increase ().
You correctly applied the conversion factor to convert between mechanical work units and Joules.
You correctly related the change in volume to the initial and final volumes using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeRearranging incorrectly as instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the additive definition of the First Law () with the rearrangement for work, or confusing the IUPAC chemistry convention (, where work done by the system is negative) with the physics convention ().
REASONING PATH
Your ACEpath teacher’s suggested approach- First Law Algebraic Rearrangement
In chemistry, . Solving for work always requires subtracting heat: .
Write the fundamental equation explicitly before isolating the unknown variable.
- Sign Sanity Check for Expansion
When a gas expands against an opposing external pressure, the gas does work on the surroundings, so and .
Verify that for an expansion (), the work value calculated has a negative sign under the IUPAC convention.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the First Law of Thermodynamics: .
Relate work to expansion against constant external pressure: .
Solve for volume change: .
Determine the final volume: .
Lock it in
What is the fundamental algebraic relationship connecting initial volume (), final volume (), and volume change ()?
, which comes from the definition .
Similar question
A gas expands against a constant external pressure of , performing of work on the surroundings. If the initial volume of the gas is , what is the final volume ? (Use ).
Answer
. Key steps: . Then .
A gas sample in a piston-cylinder assembly initially occupies . It releases of heat to the surroundings while being compressed by an external pressure of . If its internal energy increases by , find its final volume . (Use ).
Answer
is impossible, so verify numbers: . Then . With , . If , . For the given : .
One mole of an ideal gas at an initial volume of absorbs of heat and expands against a constant external pressure of . During this process, the temperature of the gas rises such that . Calculate the final volume in liters. (Use ).
Answer
. Key steps: . Then . Finally, .