Resources

The solubility product constant (KspK_{sp}) of calcium fluoride (CaF2\text{CaF}_2) is 3.90×10−113.90 \times 10^{-11} at 25∘C25^\circ\text{C}. Calculate the mass solubility of CaF2\text{CaF}_2 in grams per liter (g/L\text{g/L}) in a 0.0500 M0.0500\text{ M} aqueous solution of sodium fluoride (NaF\text{NaF}). The molar mass of CaF2\text{CaF}_2 is 78.08 g/mol78.08\text{ g/mol}.

Answer and steps

Final answer

1.22×10−6 g/L1.22 \times 10^{-6}\text{ g/L}

Steps

01

Write the dissolution equilibrium and KspK_{sp} expression

Calcium fluoride dissolves according to the equilibrium: CaFX2(s)⇌CaX2+(aq)+2 FX−(aq)\ce{CaF2(s) <=> Ca^{2+}(aq) + 2 F^-(aq)}

The solubility product expression is: Ksp=[CaX2+][FX−]2K_{sp} = [\ce{Ca^{2+}}][\ce{F^-}]^2

02

Account for the common ion effect

Sodium fluoride (NaF\ce{NaF}) is a strong, completely soluble electrolyte: NaF(aq)→NaX+(aq)+FX−(aq)\ce{NaF(aq) -> Na^+(aq) + F^-(aq)}

A 0.0500 M0.0500\text{ M} NaF\ce{NaF} solution provides an initial fluoride ion concentration of: [FX−]initial=0.0500 M[\ce{F^-}]_{\text{initial}} = 0.0500\text{ M}

Let ss be the molar solubility of CaFX2\ce{CaF2} in this solution (in mol/L\text{mol/L}). At equilibrium:

  • [CaX2+]=s[\ce{Ca^{2+}}] = s
  • [FX−]=0.0500+2s[\ce{F^-}] = 0.0500 + 2s
03

Solve for the molar solubility (ss)

Substitute the equilibrium concentrations into the KspK_{sp} expression: Ksp=s(0.0500+2s)2=3.90×10−11K_{sp} = s(0.0500 + 2s)^2 = 3.90 \times 10^{-11}

Because KspK_{sp} is extremely small, the amount of fluoride contributed by dissolving CaFX2\ce{CaF2} (2s2s) is negligible compared to the 0.0500 M0.0500\text{ M} already present from NaF\ce{NaF}: 0.0500+2s≈0.0500 M0.0500 + 2s \approx 0.0500\text{ M}

Common Pitfall: A frequent mistake is forgetting to square the concentration of fluoride ions, or mistakenly multiplying the initial [FX−][\ce{F^-}] from NaF\ce{NaF} by 22. The coefficient of 22 appears in the exponent of the KspK_{sp} expression, while NaF\ce{NaF} dissociates in a 1:11:1 ratio to give [FX−]=0.0500 M[\ce{F^-}] = 0.0500\text{ M}.

Now, solve for ss: 3.90×10−11=s⋅(0.0500)23.90 \times 10^{-11} = s \cdot (0.0500)^2 3.90×10−11=s⋅(2.50×10−3)3.90 \times 10^{-11} = s \cdot (2.50 \times 10^{-3}) s=3.90×10−112.50×10−3=1.56×10−8 mol/Ls = \frac{3.90 \times 10^{-11}}{2.50 \times 10^{-3}} = 1.56 \times 10^{-8}\text{ mol/L}

Checking the approximation: 2s=2(1.56×10−8 M)=3.12×10−8 M≪0.0500 M2s = 2(1.56 \times 10^{-8}\text{ M}) = 3.12 \times 10^{-8}\text{ M} \ll 0.0500\text{ M} The approximation is valid.

04

Convert molar solubility to mass solubility

Multiply the molar solubility by the molar mass of CaFX2\ce{CaF2} (78.08 g/mol78.08\text{ g/mol}): Mass solubility=s×M(CaFX2)\text{Mass solubility} = s \times M(\ce{CaF2}) Mass solubility=(1.56×10−8 mol/L)×(78.08 g/mol)=1.218×10−6 g/L\text{Mass solubility} = (1.56 \times 10^{-8}\text{ mol/L}) \times (78.08\text{ g/mol}) = 1.218 \times 10^{-6}\text{ g/L}

Rounding to three significant figures gives 1.22×10−6 g/L1.22 \times 10^{-6}\text{ g/L}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the fluoride ion concentration in the Ksp expression, resulting in an overestimated molar solubility and mass solubility.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    CaFX2(s)⇌CaX2++2 FX−  ⟹  [FX−]=0.0500 M\ce{CaF2(s) <=> Ca^{2+} + 2F^-} \implies [\ce{F^-}] = 0.0500\text{ M}

  2. Step 2

    Ksp=[CaX2+][FX−]K_{sp} = [\ce{Ca^{2+}}][\ce{F^-}]

    Correct

    Ksp=[CaX2+][FX−]2K_{sp} = [\ce{Ca^{2+}}][\ce{F^-}]^2

    The stoichiometric coefficient of FX−\ce{F^-} in the balanced dissolution equation is 2, so the concentration of fluoride must be raised to the power of 2 in the equilibrium expression.

  3. Step 3

    3.90×10−11=s(0.0500)  ⟹  s=7.80×10−10 M3.90 \times 10^{-11} = s(0.0500) \implies s = 7.80 \times 10^{-10}\text{ M}

    Correct

    3.90×10−11=s(0.0500)2  ⟹  s=1.56×10−8 M3.90 \times 10^{-11} = s(0.0500)^2 \implies s = 1.56 \times 10^{-8}\text{ M}

    You solved the linear equation correctly based on your formula, but omitting the exponent in the previous step carried through to this molar solubility.

  4. Step 4

    Mass solubility=7.80×10−10 mol/L×78.08 g/mol=6.09×10−8 g/L\text{Mass solubility} = 7.80 \times 10^{-10}\text{ mol/L} \times 78.08\text{ g/mol} = 6.09 \times 10^{-8}\text{ g/L}

    Correct

    Mass solubility=1.56×10−8 mol/L×78.08 g/mol=1.22×10−6 g/L\text{Mass solubility} = 1.56 \times 10^{-8}\text{ mol/L} \times 78.08\text{ g/mol} = 1.22 \times 10^{-6}\text{ g/L}

    Your conversion from molar solubility to mass solubility using the molar mass was methodically correct, but it inherits the numerical error from the molar solubility.

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the correct balanced chemical equation for the dissolution of CaFX2\ce{CaF2}.

You recognized that NaF\ce{NaF} acts as a common ion source providing [FX−]=0.0500 M[\ce{F^-}] = 0.0500\text{ M}.

You correctly used the molar mass of CaFX2\ce{CaF2} to convert molar solubility to mass solubility in grams per liter.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Stoichiometric Exponent in Equilibrium Expression

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the solubility product expression as a 1:1 salt rather than raising each ionic concentration to its stoichiometric coefficient from the balanced dissolution equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Exponents to Balanced Coefficients
  • For a salt dissolving as AXm BXn(s)⇌m AXn+(aq)+n BXm−(aq)\ce{A_m B_n(s) <=> m A^{n+}(aq) + n B^{m-}(aq)}, the solubility product is Ksp=[AXn+]m[BXm−]nK_{sp} = [\ce{A^{n+}}]^m [\ce{B^{m-}}]^n.

  • Always verify that every stoichiometric coefficient from the balanced dissolution equation appears as a power in your KspK_{sp} expression before substituting numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct equilibrium expression: Ksp=[CaX2+][FX−]2K_{sp} = [\ce{Ca^{2+}}][\ce{F^-}]^2.

  2. Substitute [CaX2+]=s[\ce{Ca^{2+}}] = s and [FX−]≈0.0500 M[\ce{F^-}] \approx 0.0500\text{ M}: 3.90×10−11=s(0.0500)2=s(2.50×10−3)3.90 \times 10^{-11} = s(0.0500)^2 = s(2.50 \times 10^{-3}).

  3. Solve for the molar solubility: s=3.90×10−112.50×10−3=1.56×10−8 mol/Ls = \frac{3.90 \times 10^{-11}}{2.50 \times 10^{-3}} = 1.56 \times 10^{-8}\text{ mol/L}.

  4. Multiply by the molar mass: Mass solubility=1.56×10−8 mol/L×78.08 g/mol=1.22×10−6 g/L\text{Mass solubility} = 1.56 \times 10^{-8}\text{ mol/L} \times 78.08\text{ g/mol} = 1.22 \times 10^{-6}\text{ g/L}.

Final answer

1.22×10−6 g/L1.22 \times 10^{-6}\text{ g/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to write equilibrium expressions directly from balanced chemical equations, paying close attention to stoichiometric coefficients.

  • Practice solving common ion problems involving salts with non-1:1 stoichiometry, such as PbClX2\ce{PbCl2} and AgX2CrOX4\ce{Ag2CrO4}.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the common ion effect from NaF and calculates the solubility of CaF₂ in pure water.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    CaFX2(s)⇌CaX2++2 FX−\ce{CaF2(s) <=> Ca^{2+} + 2F^-}

  2. Step 2

    Ksp=[CaX2+][FX−]2=(s)(2s)2=4s3K_{sp} = [\ce{Ca^{2+}}][\ce{F^-}]^2 = (s)(2s)^2 = 4s^3

    Correct

    Ksp=[CaX2+][FX−]2=s(0.0500+2s)2≈s(0.0500)2K_{sp} = [\ce{Ca^{2+}}][\ce{F^-}]^2 = s(0.0500 + 2s)^2 \approx s(0.0500)^2

    You assumed that the only source of FX−\ce{F^-} ions is the dissolving CaFX2\ce{CaF2}. Because the solution already contains 0.0500 M NaF0.0500\text{ M } \ce{NaF}, the initial fluoride concentration is 0.0500 M0.0500\text{ M}, making the equilibrium concentration [FX−]=0.0500+2s≈0.0500 M[\ce{F^-}] = 0.0500 + 2s \approx 0.0500\text{ M}.

  3. Step 3

    3.90×10−11=4s3  ⟹  s3=9.75×10−12  ⟹  s=2.14×10−4 M3.90 \times 10^{-11} = 4s^3 \implies s^3 = 9.75 \times 10^{-12} \implies s = 2.14 \times 10^{-4}\text{ M}

    Correct

    3.90×10−11=s(0.0500)2  ⟹  s=1.56×10−8 M3.90 \times 10^{-11} = s(0.0500)^2 \implies s = 1.56 \times 10^{-8}\text{ M}

    Your algebra was executed correctly, but solving the incorrect pure-water equilibrium expression led to an incorrect molar solubility.

  4. Step 4

    Mass solubility=2.14×10−4 mol/L×78.08 g/mol=0.0167 g/L\text{Mass solubility} = 2.14 \times 10^{-4}\text{ mol/L} \times 78.08\text{ g/mol} = 0.0167\text{ g/L}

    Correct

    Mass solubility=1.56×10−8 mol/L×78.08 g/mol=1.22×10−6 g/L\text{Mass solubility} = 1.56 \times 10^{-8}\text{ mol/L} \times 78.08\text{ g/mol} = 1.22 \times 10^{-6}\text{ g/L}

    You used the correct relationship between molar solubility and molar mass, but the final numerical value is affected by the earlier error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the balanced chemical equation for the dissolution of CaFX2\ce{CaF2}.

You correctly formulated the general solubility product expression Ksp=[CaX2+][FX−]2K_{sp} = [\ce{Ca^{2+}}][\ce{F^-}]^2.

You accurately multiplied the calculated molar solubility by the molar mass to find the mass solubility in g/L\text{g/L}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignored Common Ion Effect

You solved for the solubility of CaFX2\ce{CaF2} in pure water rather than in the presence of 0.0500 M NaF0.0500\text{ M } \ce{NaF}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the presence of a common ion from a completely soluble salt leads to using stoichiometric ratios (s)(2s)2(s)(2s)^2 instead of including the initial concentration of the shared ion in the equilibrium expression.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Solute vs. Medium
  • Before writing equilibrium expressions, verify whether the solvent is pure water or contains a pre-dissolved salt with a shared ion.

  • Check the problem text for any secondary solute such as NaF\ce{NaF} that shares an ion ( FX−\,\ce{F^-}) with the slightly soluble solid.

Set Up an ICE Table with Initial Concentrations
  • When a common ion is present, its initial concentration is non-zero: [Ion]eq=[Ion]initial+c⋅s[\text{Ion}]_{\text{eq}} = [\text{Ion}]_{\text{initial}} + c \cdot s.

  • Set [FX−]=0.0500+2s[\ce{F^-}] = 0.0500 + 2s, and apply the approximation 0.0500+2s≈0.0500 M0.0500 + 2s \approx 0.0500\text{ M} when KspK_{sp} is small.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that NaF\ce{NaF} dissociates completely: [FX−]initial=0.0500 M[\ce{F^-}]_{\text{initial}} = 0.0500\text{ M}.

  2. Express equilibrium concentrations in terms of molar solubility ss: [CaX2+]=s[\ce{Ca^{2+}}] = s and [FX−]=0.0500+2s≈0.0500 M[\ce{F^-}] = 0.0500 + 2s \approx 0.0500\text{ M}.

  3. Substitute into KspK_{sp}: 3.90×10−11=s(0.0500)2=s(2.50×10−3)  ⟹  s=1.56×10−8 mol/L3.90 \times 10^{-11} = s(0.0500)^2 = s(2.50 \times 10^{-3}) \implies s = 1.56 \times 10^{-8}\text{ mol/L}.

  4. Convert to mass solubility: 1.56×10−8 mol/L×78.08 g/mol=1.22×10−6 g/L1.56 \times 10^{-8}\text{ mol/L} \times 78.08\text{ g/mol} = 1.22 \times 10^{-6}\text{ g/L}.

Final answer

1.22×10−6 g/L1.22 \times 10^{-6}\text{ g/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing between pure-water solubility and common-ion solubility problems.

  • Always write an ICE table when a salt dissolves into a solution of another electrolyte.

  • Remember Le Chatelier's principle: adding a common ion always shifts the dissolution equilibrium to the left, significantly decreasing solubility.

OverviewACEpath Teacher's Diagnosis

03 The student doubles the fluoride concentration when substituting the common ion into the Ksp expression as [2F⁻]² = (2 × 0.0500)², erroneously applying stoichiometry to an already-dissociated common ion.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    CaFX2(s)⇌CaX2++2 FX−\ce{CaF2(s) <=> Ca^{2+} + 2F^-}

  2. Step 2

    [FX−]=2×0.0500=0.100 M[\ce{F^-}] = 2 \times 0.0500 = 0.100\text{ M}

    Correct

    [FX−]=0.0500 M[\ce{F^-}] = 0.0500\text{ M}

    Sodium fluoride dissociates completely as NaF→NaX++FX−\ce{NaF -> Na^+ + F^-} in a 1:11:1 ratio, so the initial concentration of FX−\ce{F^-} is 0.0500 M0.0500\text{ M}. You do not multiply by 22 here; the coefficient of 22 from CaFX2\ce{CaF2} only applies as an exponent in the KspK_{sp} expression and to the dissolved amount (2s2s).

  3. Step 3

    Ksp=[CaX2+][FX−]2  ⟹  3.90×10−11=s(0.100)2=0.0100s  ⟹  s=3.90×10−9 MK_{sp} = [\ce{Ca^{2+}}][\ce{F^-}]^2 \implies 3.90 \times 10^{-11} = s(0.100)^2 = 0.0100s \implies s = 3.90 \times 10^{-9}\text{ M}

    Correct

    Ksp=[CaX2+][FX−]2  ⟹  3.90×10−11=s(0.0500)2=0.00250s  ⟹  s=1.56×10−8 MK_{sp} = [\ce{Ca^{2+}}][\ce{F^-}]^2 \implies 3.90 \times 10^{-11} = s(0.0500)^2 = 0.00250s \implies s = 1.56 \times 10^{-8}\text{ M}

    Your algebraic setup and approximation were mathematically sound, but this step inherited the incorrect fluoride concentration from Step 2.

  4. Step 4

    Mass solubility=3.90×10−9 mol/L×78.08 g/mol=3.05×10−7 g/L\text{Mass solubility} = 3.90 \times 10^{-9}\text{ mol/L} \times 78.08\text{ g/mol} = 3.05 \times 10^{-7}\text{ g/L}

    Correct

    Mass solubility=1.56×10−8 mol/L×78.08 g/mol=1.22×10−6 g/L\text{Mass solubility} = 1.56 \times 10^{-8}\text{ mol/L} \times 78.08\text{ g/mol} = 1.22 \times 10^{-6}\text{ g/L}

    You correctly multiplied molar solubility by the molar mass of CaFX2\ce{CaF2}, but the numerical value was affected by the earlier calculation of ss.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the dissolution equilibrium and the corresponding KspK_{sp} expression for CaFX2\ce{CaF2}.

You recognized that the contribution of fluoride from the dissolving salt is negligible compared to the common ion.

You correctly applied the molar mass conversion to find the mass solubility.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Erroneous Stoichiometric Doubling of Common Ion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the stoichiometric coefficient of 22 in the sparingly soluble salt's formula with the molarity of the already-dissociated common ion provided by NaF\ce{NaF}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Separating the Salt from the Common Ion Source
  • A strong electrolyte AB\ce{AB} dissociates according to its own formula; for NaF\ce{NaF}, 1 mol of NaF1\text{ mol of NaF} yields exactly 1\text{ mol of F^-}.

  • Always write the dissociation of the soluble common-ion salt first to find the initial ion concentration before looking at the sparingly soluble salt.

Role of Stoichiometric Coefficients in Equilibrium
  • The coefficient of 22 in CaFX2⇌CaX2++2 FX−\ce{CaF2 <=> Ca^{2+} + 2F^-} defines the equilibrium concentration as [FX−]=[FX−]common+2s[\ce{F^-}] = [\ce{F^-}]_{\text{common}} + 2s, and it appears as the exponent in [FX−]2[\ce{F^-}]^2.

  • Do not multiply the initial common ion concentration by the coefficient of the insoluble salt.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the initial common ion concentration from complete dissociation: [FX−]=0.0500 M[\ce{F^-}] = 0.0500\text{ M}.

  2. Substitute into the KspK_{sp} expression with the approximation [FX−]≈0.0500 M[\ce{F^-}] \approx 0.0500\text{ M}: 3.90×10−11=s(0.0500)2=2.50×10−3s3.90 \times 10^{-11} = s(0.0500)^2 = 2.50 \times 10^{-3}s.

  3. Solve for molar solubility: s=3.90×10−112.50×10−3=1.56×10−8 mol/Ls = \frac{3.90 \times 10^{-11}}{2.50 \times 10^{-3}} = 1.56 \times 10^{-8}\text{ mol/L}.

  4. Multiply by the molar mass: Mass solubility=(1.56×10−8 mol/L)(78.08 g/mol)=1.22×10−6 g/L\text{Mass solubility} = (1.56 \times 10^{-8}\text{ mol/L})(78.08\text{ g/mol}) = 1.22 \times 10^{-6}\text{ g/L}.

Final answer

1.22×10−6 g/L1.22 \times 10^{-6}\text{ g/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the dissociation equation of the soluble salt separately to identify the exact initial concentration of the common ion.

  • Remember that the coefficient of the sparingly soluble salt only dictates the power in the KspK_{sp} expression and the +ns+ns term in an ICE table.

Lock it in

Similar question

01

Calculate the molar solubility of lead(II) chloride, PbClX2\ce{PbCl2} (Ksp=1.70×10−5K_{sp} = 1.70 \times 10^{-5}), in a 0.100 M NaCl0.100\text{ M } \ce{NaCl} solution.

Answer

1.70×10−3 M1.70 \times 10^{-3}\text{ M}. Step 1: Write Ksp=[PbX2+][ClX−]2K_{sp} = [\ce{Pb^{2+}}][\ce{Cl^-}]^2. Step 2: Since [ClX−]≈0.100 M[\ce{Cl^-}] \approx 0.100\text{ M}, substitute to get 1.70×10−5=s(0.100)2=0.0100s1.70 \times 10^{-5} = s(0.100)^2 = 0.0100s. Step 3: Solve for s=1.70×10−3 Ms = 1.70 \times 10^{-3}\text{ M}.

02

Calculate the mass solubility of silver chromate, AgX2CrOX4\ce{Ag2CrO4} (M=331.73 g/molM = 331.73\text{ g/mol}, Ksp=1.12×10−12K_{sp} = 1.12 \times 10^{-12}), in a 0.0200 M AgNOX30.0200\text{ M } \ce{AgNO3} solution in g/L\text{g/L}.

Answer

9.29×10−7 g/L9.29 \times 10^{-7}\text{ g/L}. Step 1: Write Ksp=[AgX+]2[CrOX4X2−]K_{sp} = [\ce{Ag^+}]^2[\ce{CrO4^{2-}}]. Step 2: With [AgX+]≈0.0200 M[\ce{Ag^+}] \approx 0.0200\text{ M}, 1.12×10−12=(0.0200)2⋅s=(4.00×10−4)s1.12 \times 10^{-12} = (0.0200)^2 \cdot s = (4.00 \times 10^{-4})s, giving s=2.80×10−9 Ms = 2.80 \times 10^{-9}\text{ M}. Step 3: Multiply by molar mass: (2.80×10−9 mol/L)(331.73 g/mol)=9.29×10−7 g/L(2.80 \times 10^{-9}\text{ mol/L})(331.73\text{ g/mol}) = 9.29 \times 10^{-7}\text{ g/L}.

03

The KspK_{sp} of bismuth(III) sulfide, BiX2SX3\ce{Bi2S3}, is 1.00×10−971.00 \times 10^{-97}. Write the full KspK_{sp} expression in terms of molar solubility ss in pure water and identify the overall power of ss.

Answer

Ksp=[BiX3+]2[SX2−]3=(2s)2(3s)3=108s5K_{sp} = [\ce{Bi^{3+}}]^2[\ce{S^{2-}}]^3 = (2s)^2(3s)^3 = 108s^5. The overall power of ss is 5, corresponding to the sum of the stoichiometric exponents (2+32 + 3).

Loading workspace…