Resources

An urban air quality monitoring station samples photochemical smog containing volatile organic compounds and nitrogen dioxide. A 2.50 m32.50\text{ m}^3 ambient air sample is collected at an atmospheric pressure of 98.5 kPa98.5\text{ kPa} and a temperature of 28.0∘C28.0^\circ\text{C}. Chemical analysis reveals that the sample contains 48.2 mg48.2\text{ mg} of nitrogen dioxide gas (NO2\text{NO}_2, molar mass 46.01 g⋅mol−146.01\text{ g}\cdot\text{mol}^{-1}). Calculate the total quantity of all air molecules in the sample in moles, the concentration of NO2\text{NO}_2 expressed in parts per million by volume (ppmv\text{ppm}_v, equivalent to VNO2Vtotal×106\frac{V_{\text{NO}_2}}{V_{\text{total}}} \times 10^6), and the mass concentration of NO2\text{NO}_2 in micrograms per cubic meter (μg⋅m−3\mu\text{g}\cdot\text{m}^{-3}). Use R=8.314 J⋅mol−1⋅K−1=0.08314 L⋅bar⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} = 0.08314\text{ L}\cdot\text{bar}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}.

Answer and steps

Final answer

ntotal=98.4 moln_{\text{total}} = 98.4\text{ mol}, [NO2]ppm=10.6 ppmv[\text{NO}_2]_{\text{ppm}} = 10.6\text{ ppm}_v, ρNO2=1.93×104 μg⋅m−3\rho_{\text{NO}_2} = 1.93 \times 10^4\,\mu\text{g}\cdot\text{m}^{-3}

Steps

01

Calculate the total moles of air molecules (ntotaln_{\text{total}})

Treat ambient air as an ideal gas. First, convert all given quantities into standard SI units:

  • Volume: V=2.50 m3V = 2.50\text{ m}^3
  • Pressure: P=98.5 kPa=98.5×103 PaP = 98.5\text{ kPa} = 98.5 \times 10^3\text{ Pa}
  • Temperature: T=28.0+273.15=301.15 KT = 28.0 + 273.15 = 301.15\text{ K}

Apply the ideal gas law, PV=ntotalRTPV = n_{\text{total}}RT:

ntotal=PVRTn_{\text{total}} = \frac{PV}{RT}

Substitute the values:

ntotal=(98.5×103 Pa)⋅(2.50 m3)(8.314 J⋅mol−1⋅K−1)⋅(301.15 K)=246 2502503.76 mol≈98.4 moln_{\text{total}} = \frac{(98.5 \times 10^3\text{ Pa}) \cdot (2.50\text{ m}^3)}{(8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}) \cdot (301.15\text{ K})} = \frac{246\,250}{2503.76}\text{ mol} \approx 98.4\text{ mol}


02

Determine the moles of NOX2\ce{NO2} and its volume concentration (ppmv\text{ppm}_v)

Find the amount of nitrogen dioxide in moles from its mass (m=48.2 mg=4.82×10−2 gm = 48.2\text{ mg} = 4.82 \times 10^{-2}\text{ g}) and molar mass (M=46.01 g⋅mol−1M = 46.01\text{ g}\cdot\text{mol}^{-1}):

nNOX2=mNOX2MNOX2=4.82×10−2 g46.01 g⋅mol−1≈1.048×10−3 moln_{\ce{NO2}} = \frac{m_{\ce{NO2}}}{M_{\ce{NO2}}} = \frac{4.82 \times 10^{-2}\text{ g}}{46.01\text{ g}\cdot\text{mol}^{-1}} \approx 1.048 \times 10^{-3}\text{ mol}

By Avogadro's law, at constant temperature and pressure, the volume ratio of ideal gases equals their mole ratio (or mole fraction xNOX2x_{\ce{NO2}}):

VNOX2Vtotal=nNOX2ntotal\frac{V_{\ce{NO2}}}{V_{\text{total}}} = \frac{n_{\ce{NO2}}}{n_{\text{total}}}

Therefore, express the concentration in parts per million by volume (ppmv\text{ppm}_v):

[NOX2]ppm=nNOX2ntotal×106=1.048×10−3 mol98.35 mol×106≈10.6 ppmv[\ce{NO2}]_{\text{ppm}} = \frac{n_{\ce{NO2}}}{n_{\text{total}}} \times 10^6 = \frac{1.048 \times 10^{-3}\text{ mol}}{98.35\text{ mol}} \times 10^6 \approx 10.6\text{ ppm}_v

Common Pitfall: Do not calculate ppmv\text{ppm}_v as a mass-to-mass or mass-to-volume ratio. Parts per million by volume for gases represents a volume fraction, which is mathematically identical to the mole fraction multiplied by 10610^6.


03

Calculate the mass concentration of NOX2\ce{NO2} (ρNOX2\rho_{\ce{NO2}})

Convert the mass of NOX2\ce{NO2} from milligrams (mg\text{mg}) to micrograms (μg\mu\text{g}):

mNOX2=48.2 mg×103 μg⋅mg−1=4.82×104 μgm_{\ce{NO2}} = 48.2\text{ mg} \times 10^3\,\mu\text{g}\cdot\text{mg}^{-1} = 4.82 \times 10^4\,\mu\text{g}

Divide the mass by the total volume of ambient air:

ρNOX2=mNOX2Vtotal=4.82×104 μg2.50 m3=1.93×104 μg⋅m−3\rho_{\ce{NO2}} = \frac{m_{\ce{NO2}}}{V_{\text{total}}} = \frac{4.82 \times 10^4\,\mu\text{g}}{2.50\text{ m}^3} = 1.93 \times 10^4\,\mu\text{g}\cdot\text{m}^{-3}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses Celsius directly instead of absolute temperature in kelvins in the ideal gas law, leading to an severely overestimated mole count and an underestimated ppm_v.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=98500 Pa, V=2.50 m3  ⟹  ntotal=98500×2.508.314×28.0=1058 molP = 98500\text{ Pa},\ V = 2.50\text{ m}^3 \implies n_{\text{total}} = \frac{98500 \times 2.50}{8.314 \times 28.0} = 1058\text{ mol}

    Correct

    T=28.0+273.15=301.15 K  ⟹  ntotal=98500 Pa×2.50 m38.314 J⋅mol−1⋅K−1×301.15 K≈98.4 molT = 28.0 + 273.15 = 301.15\text{ K} \implies n_{\text{total}} = \frac{98500\text{ Pa} \times 2.50\text{ m}^3}{8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} \times 301.15\text{ K}} \approx 98.4\text{ mol}

    You plugged the Celsius temperature (28.0∘C28.0^\circ\text{C}) directly into the ideal gas law without converting it to kelvins (K=∘C+273.15K = ^\circ\text{C} + 273.15). Because absolute temperature belongs in the denominator, using 28.028.0 instead of 301.15 K301.15\text{ K} overestimates the total moles by more than a factor of ten.

  2. Step 2

    n(NOX2)=0.0482 g46.01 g/mol=1.048×10−3 moln(\ce{NO2}) = \frac{0.0482\text{ g}}{46.01\text{ g/mol}} = 1.048 \times 10^{-3}\text{ mol}

  3. Step 3

    ppmv=1.048×10−31058×106=0.991 ppmv\text{ppm}_v = \frac{1.048 \times 10^{-3}}{1058} \times 10^6 = 0.991\text{ ppm}_v

    Correct

    [NOX2]ppm=1.048×10−3 mol98.35 mol×106≈10.6 ppmv[\ce{NO2}]_{\text{ppm}} = \frac{1.048 \times 10^{-3}\text{ mol}}{98.35\text{ mol}} \times 10^6 \approx 10.6\text{ ppm}_v

    Your formula equating volume fraction to mole fraction is correct, but using the incorrect total moles (1058 mol1058\text{ mol}) from Step 1 caused this concentration value to be underestimated.

  4. Step 4

    Mass=48.2 mg=48200 μg  ⟹  Concentration=48200 μg2.50 m3=19280 μg⋅m−3\text{Mass} = 48.2\text{ mg} = 48200\,\mu\text{g} \implies \text{Concentration} = \frac{48200\,\mu\text{g}}{2.50\text{ m}^3} = 19280\,\mu\text{g}\cdot\text{m}^{-3}

WHAT YOU DID WELL
Compliments from Your Teacher

You converted pressure from kilopascals to pascals correctly.

You applied the molar mass conversion accurately to determine moles of NOX2\ce{NO2}.

You understood that for an ideal gas mixture, volume fraction equals mole fraction.

You calculated the mass concentration in μg⋅m−3\mu\text{g}\cdot\text{m}^{-3} with the correct unit conversions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Celsius vs. Kelvin Conversion

You substituted 28.028.0 directly into PV=nRTPV = nRT without converting to kelvins first.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the requirement for absolute temperature (TT in kelvins) in the ideal gas equation. The gas constant R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} contains inverse kelvins (K−1\text{K}^{-1}), requiring temperature to be on the thermodynamic scale.

REASONING PATH
Your ACEpath teacher’s suggested approach
Always Convert to Absolute Temperature
  • Whenever you use PV=nRTPV = nRT, temperature must be in kelvins: T(K)=T(∘C)+273.15T(\text{K}) = T(^\circ\text{C}) + 273.15.

  • Check the units of the gas constant RR; its temperature unit is always K\text{K}, never ∘C^\circ\text{C}.

Sanity Check Molar Volume at Ambient Conditions
  • One mole of an ideal gas occupies roughly 24 to 25 L24\text{ to }25\text{ L} (0.024 to 0.025 m30.024\text{ to }0.025\text{ m}^3) near room temperature and 1 atm1\text{ atm}.

  • A 2.50 m32.50\text{ m}^3 sample contains roughly 2.500.025≈100 mol\frac{2.50}{0.025} \approx 100\text{ mol}. Obtaining ≈1000 mol\approx 1000\text{ mol} is a clear signal that temperature was entered as ≈28\approx 28 instead of ≈300\approx 300.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the given temperature to kelvins: T=28.0+273.15=301.15 KT = 28.0 + 273.15 = 301.15\text{ K}.

  2. Re-evaluate total moles: ntotal=98500 Pa×2.50 m38.314 J⋅mol−1⋅K−1×301.15 K=98.35 moln_{\text{total}} = \frac{98500\text{ Pa} \times 2.50\text{ m}^3}{8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} \times 301.15\text{ K}} = 98.35\text{ mol}.

  3. Recalculate the parts per million by volume: [NOX2]ppm=1.048×10−3 mol98.35 mol×106≈10.6 ppmv[\ce{NO2}]_{\text{ppm}} = \frac{1.048 \times 10^{-3}\text{ mol}}{98.35\text{ mol}} \times 10^6 \approx 10.6\text{ ppm}_v.

Final answer

ntotal=98.4 moln_{\text{total}} = 98.4\text{ mol}, [NOX2]ppm=10.6 ppmv[\ce{NO2}]_{\text{ppm}} = 10.6\text{ ppm}_v, ρNOX2=1.93×104 μg⋅m−3\rho_{\ce{NO2}} = 1.93 \times 10^4\,\mu\text{g}\cdot\text{m}^{-3}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up PV=nRTPV = nRT, make a habit of listing TT explicitly in kelvins as your very first step.

  • Perform an order-of-magnitude check on molar volume: at room conditions, air has about 40 mol⋅m−340\text{ mol}\cdot\text{m}^{-3}. Multiplying by 2.50 m32.50\text{ m}^3 immediately gives ≈100 mol\approx 100\text{ mol}.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets parts per million by volume as a mass ratio (parts per million by mass) instead of a mole or volume fraction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=28.0+273.15=301.15 K  ⟹  ntotal=98500×2.508.314×301.15=98.4 molT = 28.0 + 273.15 = 301.15\text{ K} \implies n_{\text{total}} = \frac{98500 \times 2.50}{8.314 \times 301.15} = 98.4\text{ mol}

  2. Step 2

    Average molar mass of air=29.0 g/mol  ⟹  mtotal=98.4 mol×29.0 g/mol=2854 g  ⟹  ppmv=(0.0482 g2854 g)×106=16.9 ppmv\text{Average molar mass of air} = 29.0\text{ g/mol} \implies m_{\text{total}} = 98.4\text{ mol} \times 29.0\text{ g/mol} = 2854\text{ g} \implies \text{ppm}_v = \left(\frac{0.0482\text{ g}}{2854\text{ g}}\right) \times 10^6 = 16.9\text{ ppm}_v

    Correct

    nNOX2=0.0482 g46.01 g⋅mol−1≈1.048×10−3 mol  ⟹  [NOX2]ppm=nNOX2ntotal×106=1.048×10−3 mol98.4 mol×106≈10.6 ppmvn_{\ce{NO2}} = \frac{0.0482\text{ g}}{46.01\text{ g}\cdot\text{mol}^{-1}} \approx 1.048 \times 10^{-3}\text{ mol} \implies [\ce{NO2}]_{\text{ppm}} = \frac{n_{\ce{NO2}}}{n_{\text{total}}} \times 10^6 = \frac{1.048 \times 10^{-3}\text{ mol}}{98.4\text{ mol}} \times 10^6 \approx 10.6\text{ ppm}_v

    You calculated parts per million by mass (ppmm\text{ppm}_m) instead of parts per million by volume (ppmv\text{ppm}_v). For ideal gases, the volume fraction ViVtotal\frac{V_i}{V_{\text{total}}} is identical to the mole fraction nintotal\frac{n_i}{n_{\text{total}}}, so you should find nNOX2n_{\ce{NO2}} and divide it by ntotaln_{\text{total}}.

  3. Step 3

    Mass=48.2 mg=48200 μg  ⟹  Concentration=48200 μg2.50 m3=19280 μg⋅m−3\text{Mass} = 48.2\text{ mg} = 48200\ \mu\text{g} \implies \text{Concentration} = \frac{48200\ \mu\text{g}}{2.50\text{ m}^3} = 19280\ \mu\text{g}\cdot\text{m}^{-3}

WHAT YOU DID WELL
Compliments from Your Teacher

You converted all given values to consistent SI base units before applying the ideal gas law.

You calculated the total molar quantity of the air sample accurately.

You converted mass units properly and calculated the volumetric mass concentration correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass fraction used instead of mole fraction for gas ppm

You treated ppmv\text{ppm}_v as a ratio of masses rather than a ratio of volumes or moles.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing gas-phase concentration units (ppmv=ViVtotal×106=nintotal×106\text{ppm}_v = \frac{V_i}{V_{\text{total}}} \times 10^6 = \frac{n_i}{n_{\text{total}}} \times 10^6) with aqueous or solid concentration units (ppmw=mimtotal×106\text{ppm}_w = \frac{m_i}{m_{\text{total}}} \times 10^6). In gas chemistry, ppm\text{ppm} or ppmv\text{ppm}_v universally refers to molar or volumetric parts per million.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define $\text{ppm}_v$ for ideal gases
  • By Avogadro's law, at constant TT and PP, ViVtotal=nintotal=xi\frac{V_i}{V_{\text{total}}} = \frac{n_i}{n_{\text{total}}} = x_i. Therefore, ppmv=xi×106\text{ppm}_v = x_i \times 10^6.

  • Always convert trace gas mass into moles (ni=miMin_i = \frac{m_i}{M_i}) and divide by total moles (ntotaln_{\text{total}}) when evaluating ppmv\text{ppm}_v.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate moles of NOX2\ce{NO2}: nNOX2=48.2×10−3 g46.01 g⋅mol−1≈1.0476×10−3 moln_{\ce{NO2}} = \frac{48.2 \times 10^{-3}\text{ g}}{46.01\text{ g}\cdot\text{mol}^{-1}} \approx 1.0476 \times 10^{-3}\text{ mol}.

  2. Compute volume/mole fraction in parts per million: [NOX2]ppmv=nNOX2ntotal×106=1.0476×10−3 mol98.35 mol×106≈10.6 ppmv[\ce{NO2}]_{\text{ppm}_v} = \frac{n_{\ce{NO2}}}{n_{\text{total}}} \times 10^6 = \frac{1.0476 \times 10^{-3}\text{ mol}}{98.35\text{ mol}} \times 10^6 \approx 10.6\text{ ppm}_v.

Final answer

ntotal=98.4 moln_{\text{total}} = 98.4\text{ mol}, [NOX2]=10.6 ppmv[\ce{NO2}] = 10.6\text{ ppm}_v, ρNOX2=1.93×104 μg⋅m−3\rho_{\ce{NO2}} = 1.93 \times 10^4\ \mu\text{g}\cdot\text{m}^{-3}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between ppmv\text{ppm}_v (mole/volume basis used for gases) and ppmm\text{ppm}_m (mass basis used for solutions).

  • Practice converting trace atmospheric gas concentrations between μg⋅m−3\mu\text{g}\cdot\text{m}^{-3} and ppmv\text{ppm}_v using molar mass and ideal gas density.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert milligrams to micrograms when calculating mass concentration, confusing milligrams per cubic meter with micrograms per cubic meter.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=301.15 K,  P=98500 Pa  ⟹  ntotal=98500×2.508.314×301.15=98.4 molT = 301.15\text{ K},\; P = 98500\text{ Pa} \implies n_{\text{total}} = \frac{98500 \times 2.50}{8.314 \times 301.15} = 98.4\text{ mol}

  2. Step 2

    n(NOX2)=0.0482 g46.01 g/mol=1.048×10−3 mol  ⟹  ppmv=(1.048×10−3 mol98.4 mol)×106=10.7 ppmvn(\ce{NO2}) = \frac{0.0482\text{ g}}{46.01\text{ g/mol}} = 1.048 \times 10^{-3}\text{ mol} \implies \text{ppm}_v = \left(\frac{1.048 \times 10^{-3}\text{ mol}}{98.4\text{ mol}}\right) \times 10^6 = 10.7\text{ ppm}_v

  3. Step 3

    Concentration=48.22.50  ⟹  Concentration=19.3  μg⋅m−3\text{Concentration} = \frac{48.2}{2.50} \implies \text{Concentration} = 19.3\;\mu\text{g}\cdot\text{m}^{-3}

    Correct

    ρNOX2=48.2 mg×103 μg⋅mg−12.50 m3=1.93×104  μg⋅m−3\rho_{\ce{NO2}} = \frac{48.2\text{ mg} \times 10^3\,\mu\text{g}\cdot\text{mg}^{-1}}{2.50\text{ m}^3} = 1.93 \times 10^4\;\mu\text{g}\cdot\text{m}^{-3}

    You divided 48.2 mg48.2\text{ mg} by 2.50 m32.50\text{ m}^3, which yields 19.3 mg⋅m−319.3\text{ mg}\cdot\text{m}^{-3}, but you wrote the unit as μg⋅m−3\mu\text{g}\cdot\text{m}^{-3} without multiplying by the conversion factor 103 μg⋅mg−110^3\,\mu\text{g}\cdot\text{mg}^{-1}.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted temperature to Kelvin and pressure to Pascals accurately.

You applied the ideal gas equation to compute the total moles of gas correctly.

You used Avogadro's law to relate the volume fraction in ppmv\text{ppm}_v to the mole ratio.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric unit prefix conversion error

You treated milligrams (mg\text{mg}) as identical to micrograms (μg\mu\text{g}) when writing down the units of mass concentration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You skipped explicit dimensional analysis during the substitution phase, calculating mV\frac{m}{V} using milligrams while labeling the final quotient with the target microgram unit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Mass Prefixes
  • 1 g=103 mg=106 μg1\text{ g} = 10^3\text{ mg} = 10^6\,\mu\text{g}, so 1 mg=103 μg1\text{ mg} = 10^3\,\mu\text{g}.

  • Always convert the mass value into the exact prefix requested by the target unit before dividing by volume.

Unit Tracking in Calculations
  • Carrying units through every algebraic step prevents prefix mismatches.

  • Write 48.2 mg×103 μg/mg2.50 m3\frac{48.2\text{ mg} \times 10^3\,\mu\text{g}/\text{mg}}{2.50\text{ m}^3} explicitly rather than writing bare numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the given mass of NOX2\ce{NO2} from milligrams to micrograms: mNOX2=48.2 mg×103 μg⋅mg−1=4.82×104 μgm_{\ce{NO2}} = 48.2\text{ mg} \times 10^3\,\mu\text{g}\cdot\text{mg}^{-1} = 4.82 \times 10^4\,\mu\text{g}.

  2. Divide by the sample volume: ρNOX2=4.82×104 μg2.50 m3=1.928×104 μg⋅m−3\rho_{\ce{NO2}} = \frac{4.82 \times 10^4\,\mu\text{g}}{2.50\text{ m}^3} = 1.928 \times 10^4\,\mu\text{g}\cdot\text{m}^{-3}.

  3. Round to three significant figures: 1.93×104 μg⋅m−31.93 \times 10^4\,\mu\text{g}\cdot\text{m}^{-3}.

Final answer

ρNOX2=1.93×104 μg⋅m−3\rho_{\ce{NO2}} = 1.93 \times 10^4\,\mu\text{g}\cdot\text{m}^{-3}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include explicit unit labels on all numbers inside conversion fractions to catch mismatched prefixes.

  • Review metric prefixes from milli (10−310^{-3}) down to nano (10−910^{-9}).

  • Perform a quick order-of-magnitude check whenever converting from a larger unit (mg\text{mg}) to a smaller unit (μg\mu\text{g}).

Lock it in

Similar question

01

A weather balloon contains 15.0 m315.0\text{ m}^3 of helium gas at an ambient pressure of 101.3 kPa101.3\text{ kPa} and a temperature of 17.0∘C17.0^\circ\text{C}. Calculate the total amount of helium gas in moles inside the balloon.

Answer

n=631 moln = 631\text{ mol}. Key step: convert T=17.0+273.15=290.15 KT = 17.0 + 273.15 = 290.15\text{ K}, then evaluate n=PVRT=101300 Pa×15.0 m38.314 J⋅mol−1⋅K−1×290.15 K≈631 moln = \frac{PV}{RT} = \frac{101300\text{ Pa} \times 15.0\text{ m}^3}{8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} \times 290.15\text{ K}} \approx 631\text{ mol}.

02

An air sample of volume 4.00 m34.00\text{ m}^3 is gathered at 95.0 kPa95.0\text{ kPa} and 22.0∘C22.0^\circ\text{C}. If the sample contains 0.180 g0.180\text{ g} of ozone (OX3\ce{O3}, molar mass 48.00 g⋅mol−148.00\text{ g}\cdot\text{mol}^{-1}), find the ozone concentration in ppmv\text{ppm}_v.

Answer

[OX3]=24.2 ppmv[\ce{O3}] = 24.2\text{ ppm}_v. Key steps: T=295.15 KT = 295.15\text{ K}; total moles ntotal=95000×4.008.314×295.15=154.86 moln_{\text{total}} = \frac{95000 \times 4.00}{8.314 \times 295.15} = 154.86\text{ mol}; ozone moles n=0.180 g48.00 g⋅mol−1=3.75×10−3 moln = \frac{0.180\text{ g}}{48.00\text{ g}\cdot\text{mol}^{-1}} = 3.75 \times 10^{-3}\text{ mol}; concentration =3.75×10−3154.86×106≈24.2 ppmv= \frac{3.75 \times 10^{-3}}{154.86} \times 10^6 \approx 24.2\text{ ppm}_v.

03

A laboratory safety monitor detects carbon monoxide (CO\ce{CO}, molar mass 28.01 g⋅mol−128.01\text{ g}\cdot\text{mol}^{-1}) at a concentration of 35.0 ppmv35.0\text{ ppm}_v in a room at 100.0 kPa100.0\text{ kPa} and 20.0∘C20.0^\circ\text{C}. Calculate the mass concentration of CO\ce{CO} in milligrams per cubic meter (mg⋅m−3\text{mg}\cdot\text{m}^{-3}).

Answer

ρCO=40.1 mg⋅m−3\rho_{\ce{CO}} = 40.1\text{ mg}\cdot\text{m}^{-3}. Key steps: total air molar density is nV=PRT=1000008.314×293.15=41.03 mol⋅m−3\frac{n}{V} = \frac{P}{RT} = \frac{100000}{8.314 \times 293.15} = 41.03\text{ mol}\cdot\text{m}^{-3}; moles of CO\ce{CO} per cubic meter is 41.03×(35.0×10−6)=1.436×10−3 mol⋅m−341.03 \times (35.0 \times 10^{-6}) = 1.436 \times 10^{-3}\text{ mol}\cdot\text{m}^{-3}; mass concentration =1.436×10−3 mol⋅m−3×28.01 g⋅mol−1×103 mg⋅g−1≈40.1 mg⋅m−3= 1.436 \times 10^{-3}\text{ mol}\cdot\text{m}^{-3} \times 28.01\text{ g}\cdot\text{mol}^{-1} \times 10^3\text{ mg}\cdot\text{g}^{-1} \approx 40.1\text{ mg}\cdot\text{m}^{-3}.

Loading workspace…