Resources
In an analytical chemistry laboratory, a student standardizes an unknown iron(II) sulfate solution using controlled-potential coulometry, an absolute electrolytic titration method requiring no chemical primary standard. A aliquot of the solution is transferred to an electrolytic titration vessel containing dilute sulfuric acid. A constant current of is passed through the working platinum anode to quantitatively oxidize all iron(II) ions according to: . A spectrophotometric indicator signals the exact endpoint when all has been consumed, corresponding to an elapsed electrolysis time of . Given , determine: (a) whether the coulometric working cell functions as a galvanic or electrolytic cell, (b) the total quantity of charge consumed in coulombs, and (c) the precise molar concentration of in the original sample.
Answer and steps
Final answer
(a) Electrolytic cell; (b) ; (c) ().
Steps
Part (a): Identifying the Type of Electrochemical Cell
An electrochemical cell is classified based on whether the reaction is thermodynamically spontaneous or driven by an external energy source:
- A galvanic (voltaic) cell harnesses a spontaneous chemical reaction () to generate an electric current.
- An electrolytic cell uses an external electrical power supply to drive a non-spontaneous redox process ().
In this coulometric titration, an external power supply actively enforces a constant current () to oxidize to at the working platinum anode. Because electrical energy is supplied from the outside to drive the reaction to completion, the apparatus functions as an electrolytic cell.
Part (b): Calculating the Total Quantity of Charge ()
The total electric charge () passed during constant-current electrolysis is defined by:
where:
- is the current in amperes (),
- is the elapsed time in seconds ().
- Convert the current to amperes:
-
Convert the total time to seconds:
Pitfall to avoid: Forgetting to convert minutes to seconds leads to an error by a factor of 60.
- Compute the total charge:
Part (c): Determining the Molar Concentration of
- Find the moles of electrons transferred (): Using Faraday's constant ():
- Relate moles of electrons to moles of : From the half-reaction: The stoichiometric ratio is per :
- Calculate the molar concentration: The aliquot volume is .
Typical errors
01 The student misidentifies the stoichiometric electron transfer ratio by confusing iron's oxidation state with the moles of electrons exchanged per mole of Fe²⁺ oxidized, dividing the moles of electrons by 2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Electrolytic cell because an external electrical current is applied to drive the reaction.
- Step 2
- Step 3
- Step 4Correct
The oxidation half-reaction is , which transfers only per . Dividing by 2 confuses the oxidation state of with the change in oxidation number .
- Step 5Correct
Your molarity formula and unit conversions were carried out properly, but the numerical answer is halved due to the error in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly classified the cell as electrolytic because it uses external power to drive the redox reaction.
You correctly converted the electrolysis time to seconds and accurately computed the total charge .
You applied Faraday's constant correctly to determine the total moles of transferred electrons.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeDividing the moles of electrons by 2 when converting to moles of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the absolute initial oxidation state of an ion ( in ) with the number of electrons exchanged during the specific half-reaction ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Change in Oxidation State vs. Net Charge
The number of electrons transferred per formula unit equals the absolute change in oxidation state , not the initial ionic charge.
Write out the balanced half-reaction explicitly and count the electrons shown in the equation before setting up mole ratios.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the balanced half-reaction: .
Identify the stoichiometric mole ratio: .
Equate the moles: .
Divide by the aliquot volume in liters: .
(a) Electrolytic cell; (b) ; (c) (or )
02 The student forgets to convert the elapsed minutes to seconds, multiplying the current by the unstandardized numerical time of 14.47 minutes instead of total seconds.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Electrolytic cell because an external electrical current is supplied to carry out oxidation.
- Step 2Correct
You calculated the charge using time in minutes () rather than converting to seconds. Because , time must be in seconds, giving and .
- Step 3Correct
You applied Faraday's law with the correct mole ratio between electrons and , but the value was smaller by a factor of due to the earlier charge error.
- Step 4Correct
Your concentration formula and volume conversion were carried out properly, but the final numerical value inherited the factor-of-60 error from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly distinguished an electrolytic cell from a galvanic cell based on the presence of an external power source.
You converted milliamperes to amperes accurately as .
You set up Faraday's law and molar concentration calculations with the correct stoichiometric relationships and volume units.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou converted time into decimal minutes () instead of converting it into total seconds ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the SI definition of the coulomb (), which requires elapsed time to be expressed strictly in seconds when applying .
REASONING PATH
Your ACEpath teacher’s suggested approach- SI Base Unit for Charge
The definition of an electric charge is , where is in amperes () and is strictly in seconds ().
Always convert any combination of hours and minutes into total seconds before multiplying by current in amperes.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert total time to seconds: .
Calculate total charge: .
Calculate moles of oxidized: .
Determine molarity: .
(a) Electrolytic cell; (b) ; (c)
03 The student leaves the electric current in milliamperes instead of converting it to amperes, leading to an answer that is three orders of magnitude too large.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Electrolytic cell because electrical power is supplied from outside to drive the oxidation.
- Step 2Correct
,
You converted the time to seconds accurately, but you multiplied by directly without converting milliamperes to amperes (). Because , the current must be in amperes.
- Step 3Correct
Your setup using and was completely correct, but the numerical result is off by a factor of due to the unconverted current from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly classified the setup as an electrolytic cell and justified it by noting the external electrical power supply.
You correctly converted into .
You correctly related the moles of electrons to the moles of using Faraday's constant and the stoichiometric ratio.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the current as instead of , omitting the milli- () metric prefix conversion.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking that the coulomb is defined strictly in SI base units as an ampere-second (), so current in milliamperes must be multiplied by before calculating charge.
REASONING PATH
Your ACEpath teacher’s suggested approach- SI Unit Matching for Charge
requires in amperes () and in seconds () to yield in coulombs ().
Always rewrite current given in as before multiplying by time.
- Reasonableness Check on Molar Concentration
Typical aqueous laboratory solutions range from to roughly .
Notice if an answer such as exceeds the solubility of pure water (), which instantly flags a power-of-ten mistake.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert current: .
Calculate charge: .
Calculate moles of : .
Calculate concentration: .
(a) Electrolytic cell; (b) ; (c)
Lock it in
How do you determine the moles of electrons () exchanged per mole of analyte in a redox reaction?
Find the difference in oxidation state: . Do not just look at the starting ionic charge.
Similar question
A sample containing is reduced to copper metal () at a constant current of for . How many moles of are plated out? ()
Answer
. First, . Next, . The half-reaction is , so .
A solution of iodide () is coulometrically titrated at an anode according to . A constant current of reaches the endpoint in . What is the initial molarity of ? ()
Answer
. Total time . Charge . Moles of electrons . From the half-reaction, transfer ( ratio), so . Concentration .
An unknown vanadium solution () containing (vanadium in oxidation state) is electrolytically oxidized to (vanadium in oxidation state). The titration requires for . Find the molarity of in the sample. ()
Answer
. Total time . Charge . Moles of electrons . The oxidation state changes from to , so and . Thus, .