Resources
A student hypothesizes that forming a solid solution by alloying pure gold with copper (to produce gold) will increase both mechanical ductility and electrical conductivity because copper has high conductivity and introduces extra atoms. (a) Evaluate whether the electrical conductivity of gold is higher or lower than pure gold, citing Matthiessen's rule (). (b) Explain the effect of solute copper atoms on dislocation motion, yield strength, and tensile ductility of the alloy compared to pure annealed gold.
Answer and steps
Final answer
(a) Lower conductivity; solute copper atoms disrupt lattice periodicity, introducing impurity scattering () that reduces mean free path and drops conductivity below pure gold. (b) Solute copper atoms create local lattice strain fields that pin dislocations (solid-solution strengthening), increasing yield strength and hardness while reducing ductility compared to soft, highly malleable pure annealed gold.
Steps
Part (a): Electrical Conductivity and Matthiessen's Rule
- Understand Matthiessen's Rule:
The total electrical resistivity () of a crystalline metal is the sum of temperature-dependent phonon scattering and structural defect/impurity scattering: Electrical conductivity () is inversely related to total resistivity: -
Evaluate the Effect of Alloying:
- In pure gold (), the crystal lattice has high periodic order, meaning at room temperature. Electrons travel relatively long distances between collisions (a large mean free path, ).
- In gold, of the lattice positions are randomly occupied by copper () atoms. Because copper and gold atoms differ in atomic radius and electronic potential, these substitutional solute atoms disrupt the periodic lattice potential.
- This disturbance acts as an array of scattering centers for conduction electrons, sharply increasing the impurity contribution ().
-
Conclusion for Conductivity:
The increased scattering reduces the mean free path of electrons, causing of the alloy to be significantly higher than that of pure gold. Therefore, the electrical conductivity of gold is lower than that of pure gold.Common Pitfall: Assuming an alloy's conductivity follows a simple weighted average (rule of mixtures). Even though pure copper is a better conductor than pure gold, mixing them creates solid-solution disorder. Impurity scattering drastically reduces electron mobility, making the alloy less conductive than either pure element.
Part (b): Mechanical Behavior (Dislocations, Yield Strength, and Ductility)
-
Atomic Size Mismatch and Strain Fields:
- A neutral copper atom has a smaller metallic radius () than a gold atom ().
- When copper substitutes into the gold face-centered cubic () lattice, it creates localized compressive and tensile elastic strain fields in the surrounding crystal matrix.
-
Impedance of Dislocation Motion:
- Plastic deformation in metals occurs through the glide of line defects called dislocations.
- The localized strain fields around solute copper atoms interact with the strain fields of dislocations, creating an energy barrier that pins them and restricts their slip across crystal planes (solid-solution strengthening).
-
Effect on Yield Strength and Ductility:
- Yield Strength: Because higher shear stress is required to force dislocations past these solute pinning obstacles, the alloy's yield strength and hardness increase.
- Tensile Ductility: Ductility depends on the ability of dislocations to move freely and allow extensive permanent plastic deformation before fracture. Because dislocation motion is hindered, tensile ductility decreases relative to soft, extremely malleable pure annealed gold.
Typical errors
01 The student uses a simple rule of mixtures for conductivity instead of recognizing that solute atoms increase electron scattering, concluding conductivity increases.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Pure has higher electrical conductivity than pure . By rule of mixtures, adding increases overall conductivity. , so higher base conductivity lowers resistivity. Conductivity of gold is higher than pure gold.
CorrectIn pure gold, periodic crystal symmetry allows electrons a long mean free path (). In gold, substituting atoms disrupts the periodic electrostatic potential and introduces lattice strain, creating scattering centers that increase impurity resistivity (). By Matthiessen's rule, increases, so conductivity of gold is lower than that of pure gold.
You correctly cited Matthiessen's rule formula, but electrical conductivity in solid solutions does not follow a rule of mixtures. Introducing solute copper atoms disrupts the crystal lattice periodicity, which acts as an array of scattering centers for conduction electrons, sharply increasing and decreasing conductivity.
- Step 2
atoms create lattice distortion that impedes dislocation motion. Yield strength increases due to solid solution strengthening. Tensile ductility decreases compared to pure gold.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that solute copper atoms create lattice distortion that impedes dislocation slip.
You accurately concluded that solid-solution strengthening raises yield strength while lowering tensile ductility.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that electrical transport in a single-phase solid solution follows an arithmetic weighted average of the constituent pure metals, overlooking the fact that atomic-scale disorder disrupts periodic lattice potential and scatters conduction electrons.
REASONING PATH
Your ACEpath teacher’s suggested approach- Solid-Solution Resistivity vs. Rule of Mixtures
Electrical resistivity in alloys is dominated by electron scattering from broken lattice periodicity (), meaning a solid solution almost always has higher resistivity (lower conductivity) than either pure constituent.
Never use a weighted average for alloy conductivity; evaluate how solute atoms disrupt lattice periodicity to increase .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall Matthiessen's rule: , where .
Recognize that in pure annealed gold, the lattice is highly periodic, so .
Evaluate alloying: Adding places smaller copper atoms randomly on gold face-centered cubic lattice sites, destroying perfect translational symmetry.
Conclude that electrons scatter frequently against these solute sites, causing to rise substantially and the electron mean free path to drop.
State the final relation: , so .
(a) Lower electrical conductivity than pure gold; (b) Impeded dislocation glide leads to increased yield strength and decreased tensile ductility.
02 The student confuses strength with ductility, assuming that strengthening a metal increases its ductility.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Solute Cu atoms act as scattering centers for conduction electrons. By Matthiessen's rule, increases so increases. Conductivity is lower for gold than pure gold.
- Step 2
Solute Cu atoms produce lattice strain that pins dislocations. Dislocation motion is impeded, increasing yield strength.
- Step 3
A stronger material deforms more easily without breaking, so ductility increases.
CorrectBecause dislocation motion is impeded, plastic deformation is harder to sustain, causing tensile ductility to decrease compared to soft, annealed pure gold.
Higher yield strength means greater resistance to plastic deformation, not easier deformation. Because ductility relies on easy dislocation glide to achieve large plastic strains before fracture, pinning dislocations reduces tensile ductility.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used Matthiessen's rule to show that impurity scattering lowers electrical conductivity.
You identified that solute copper atoms produce lattice strain fields that pin dislocations.
You correctly deduced that impeding dislocation motion increases the yield strength of the alloy.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated mechanical strength and ductility as positively correlated properties, assuming that a higher-strength metal deforms more easily before breaking. In crystalline metals, plastic deformation is mediated by dislocation glide; impeding dislocation motion raises the stress required to yield (higher strength) but limits total elongation prior to fracture (lower ductility).
REASONING PATH
Your ACEpath teacher’s suggested approach- Dislocation Mobility vs. Ductility
Tensile ductility is proportional to dislocation mobility: easier dislocation glide allows greater plastic deformation before necking and fracture.
Whenever an alloy mechanism pins dislocations or raises yield strength, infer that tensile ductility typically decreases.
- Strength vs. Ductility Distinction
Yield strength measures resistance to initiating plastic deformation, while ductility measures the total plastic strain sustained before failure.
Do not equate 'stronger' with 'deforms more easily'; remember the fundamental strength-ductility trade-off in metallic alloys.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that plastic elongation requires continuous, unhindered dislocation glide along slip planes.
Because solute copper atoms create localized stress fields that pin dislocations, a greater applied stress is needed to advance them, restricting total plastic strain.
Conclude that pure annealed gold exhibits high ductility due to uninhibited dislocation glide, whereas gold exhibits reduced tensile ductility alongside its higher yield strength.
Part (a): Electrical conductivity is lower for gold due to increased impurity scattering (). Part (b): Solute copper atoms pin dislocations via lattice strain, increasing yield strength but reducing tensile ductility.
Lock it in
What is Matthiessen's rule, and what does each term represent in ?
Total resistivity equals phonon scattering (, temperature-dependent) plus structural defect/solute scattering (, temperature-independent). Principle: independent electron scattering mechanisms are additive in resistivity.
Similar question
Cartridge brass is a single-phase substitutional alloy of and . Pure copper has an electrical conductivity of , while pure zinc has . Explain why the electrical conductivity of cartridge brass is approximately (lower than or equal to both), rather than the weighted average of .
Answer
Conductivity is inversely proportional to total resistivity (). In brass, zinc atoms randomly substitute on copper lattice sites. Because and differ in valence and ionic size, the substitutional solute atoms disrupt lattice periodicity, creating high impurity scattering (). This reduces the electron mean free path, dropping conductivity far below the linear rule-of-mixtures prediction.
Nordheim's rule models the residual impurity resistivity of a disordered binary solid solution as , where is a positive constant. (a) At what atomic fraction of solute B is the impurity resistivity maximized? (b) What does this imply about the electrical conductivity of a solid solution relative to the pure metals?
Answer
(a) Differentiating with respect to gives , yielding maximum impurity resistivity at (). (b) At , lattice disorder and electron scattering reach their maximum, resulting in the highest and consequently the lowest electrical conductivity across the entire solid-solution series.
Phosphorus is frequently added as a deoxidizer in copper piping (). Although phosphorus removes brittle cuprous oxides, it drops electrical conductivity from to . Conversely, adding hard insoluble lead particles (which do not dissolve in the copper lattice) barely affects conductivity. Explain this contrast using electron scattering and dislocation mechanics.
Answer
Dissolved phosphorus enters the copper lattice as an interstitial or substitutional solute with a valence difference of relative to , creating intense localized electrostatic perturbations that strongly scatter conduction electrons throughout the bulk, raising . In contrast, insoluble lead forms discrete macroscopic second-phase globules that leave the surrounding copper matrix chemically pure and periodic; electrons travel unhindered through the pure copper channels, preserving high electrical conductivity while still altering mechanical machinability.