Resources

Consider the neutralization of aqueous ammonia with nitric acid: NH3(aq)+HNO3(aq)→NH4NO3(aq)\text{NH}_3(aq) + \text{HNO}_3(aq) \rightarrow \text{NH}_4\text{NO}_3(aq). A common misconception is that all acid-base neutralization reactions produce a neutral solution with pH=7.00\text{pH} = 7.00 at the equivalence point. If equimolar amounts of 0.100 M NH30.100\text{ M }\text{NH}_3 (Kb=1.80×10−5K_b = 1.80 \times 10^{-5}) and 0.100 M HNO30.100\text{ M }\text{HNO}_3 are mixed in equal volumes, calculate the exact pH of the resulting solution at 25∘C25^\circ\text{C} to demonstrate why the equivalence point is acidic.

Answer and steps

Final answer

pH=5.28\text{pH} = 5.28 (the solution is acidic due to the hydrolysis of the conjugate acid NH4+\text{NH}_4^+: NH4+(aq)+H2O(l)⇌NH3(aq)+H3O+(aq)\text{NH}_4^+(aq) + \text{H}_2\text{O}(l) \rightleftharpoons \text{NH}_3(aq) + \text{H}_3\text{O}^+(aq)).

Steps

01

Determine the Concentration of the Salt Formed

When equal volumes (VV) of 0.100 M NHX30.100\text{ M }\ce{NH3} and 0.100 M HNOX30.100\text{ M }\ce{HNO3} are mixed, they react in a 1:11:1 stoichiometric ratio to completion:

NHX3(aq)+HNOX3(aq)→NHX4NOX3(aq)\ce{NH3(aq) + HNO3(aq) -> NH4NO3(aq)}

Because equimolar amounts of a weak base and a strong acid react, the system reaches the equivalence point.

  • Initial moles of NHX3\ce{NH3}: n=0.100 M×Vn = 0.100\text{ M} \times V
  • Initial moles of HNOX3\ce{HNO3}: n=0.100 M×Vn = 0.100\text{ M} \times V
  • Moles of NHX4NOX3\ce{NH4NO3} formed: 0.100 M×V0.100\text{ M} \times V
  • Total solution volume: Vtotal=V+V=2VV_{\text{total}} = V + V = 2V

The concentration of the ammonium ion, [NHX4X+][\ce{NH4+}], is diluted by the doubled volume:

[NHX4X+]=0.100 M×V2V=0.0500 M[\ce{NH4+}] = \frac{0.100\text{ M} \times V}{2V} = 0.0500\text{ M}

Common Pitfall: A frequent mistake is using the initial concentration (0.100 M0.100\text{ M}) rather than accounting for the two-fold dilution caused by mixing equal volumes.


02

Determine KaK_a for the Ammonium Ion

In aqueous solution, NHX4NOX3\ce{NH4NO3} dissociates completely into NHX4X+\ce{NH4+} and NOX3X−\ce{NO3-}. The nitrate ion (NOX3X−\ce{NO3-}) is the conjugate base of a strong acid (HNOX3\ce{HNO3}) and does not undergo hydrolysis.

However, NHX4X+\ce{NH4+} is the conjugate acid of the weak base NHX3\ce{NH3}. At 25∘C25^\circ\text{C}, the acid dissociation constant KaK_a is related to KbK_b by Kw=1.00×10−14K_w = 1.00 \times 10^{-14}:

Ka=KwKb=1.00×10−141.80×10−5≈5.56×10−10K_a = \frac{K_w}{K_b} = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} \approx 5.56 \times 10^{-10}


03

Calculate [HX3OX+][\ce{H3O+}] from the Hydrolysis of NHX4X+\ce{NH4+}

The ammonium ion hydrolyzes according to the equilibrium:

NHX4X+(aq)+HX2O(l)⇌NHX3(aq)+HX3OX+(aq)\ce{NH4+(aq) + H2O(l) <=> NH3(aq) + H3O+(aq)}

Let x=[HX3OX+]=[NHX3]x = [\ce{H3O+}] = [\ce{NH3}]. The equilibrium expression is:

Ka=[NHX3][HX3OX+][NHX4X+]=x20.0500−xK_a = \frac{[\ce{NH3}][\ce{H3O+}]}{[\ce{NH4+}]} = \frac{x^2}{0.0500 - x}

Since KaK_a is extremely small relative to the initial concentration (0.0500≫x0.0500 \gg x), we can use the approximation 0.0500−x≈0.05000.0500 - x \approx 0.0500:

5.56×10−10=x20.05005.56 \times 10^{-10} = \frac{x^2}{0.0500}

x2=5.56×10−10×0.0500=2.78×10−11x^2 = 5.56 \times 10^{-10} \times 0.0500 = 2.78 \times 10^{-11}

x=[HX3OX+]=2.78×10−11≈5.27×10−6 Mx = [\ce{H3O+}] = \sqrt{2.78 \times 10^{-11}} \approx 5.27 \times 10^{-6}\text{ M}


04

Calculate the Solution pH

Using the concentration of hydronium ions:

pH=−log⁡10[HX3OX+]=−log⁡10(5.27×10−6)≈5.28\text{pH} = -\log_{10}[\ce{H3O+}] = -\log_{10}(5.27 \times 10^{-6}) \approx 5.28

Because pH=5.28<7.00\text{pH} = 5.28 < 7.00, the solution at the equivalence point is acidic due to the hydrolysis of the weak base's conjugate acid (NHX4X+\ce{NH4+}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for dilution upon mixing equal volumes, using 0.100 M instead of 0.0500 M for the concentration of NH4+.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [NH4+]=0.100 M[\text{NH}_4^+] = 0.100\text{ M}

    Correct

    [NH4+]=0.100 M×V2V=0.0500 M[\text{NH}_4^+] = \frac{0.100\text{ M} \times V}{2V} = 0.0500\text{ M}

    When equal volumes VV of both solutions are combined, the total volume doubles to 2V2V. This dilutes the concentration of the salt formed by half, giving [NH4+]=0.0500 M[\text{NH}_4^+] = 0.0500\text{ M} instead of 0.100 M0.100\text{ M}.

  2. Step 2

    Ka=KwKb=(1.00×10−14)(1.80×10−5)=5.56×10−10K_a = \frac{K_w}{K_b} = \frac{(1.00 \times 10^{-14})}{(1.80 \times 10^{-5})} = 5.56 \times 10^{-10}

  3. Step 3

    [H3O+]=Ka×[NH4+]=5.56×10−10×0.100=7.46×10−6 M[\text{H}_3\text{O}^+] = \sqrt{K_a \times [\text{NH}_4^+]} = \sqrt{5.56 \times 10^{-10} \times 0.100} = 7.46 \times 10^{-6}\text{ M}

    Correct

    [H3O+]=5.56×10−10×0.0500≈5.27×10−6 M[\text{H}_3\text{O}^+] = \sqrt{5.56 \times 10^{-10} \times 0.0500} \approx 5.27 \times 10^{-6}\text{ M}

    Your equilibrium formula [H3O+]=Ka×C[\text{H}_3\text{O}^+] = \sqrt{K_a \times C} is valid, but substituting the undiluted concentration from Step 1 propagated into an incorrect hydronium concentration.

  4. Step 4

    pH=−log⁡(7.46×10−6)=5.13\text{pH} = -\log(7.46 \times 10^{-6}) = 5.13

    Correct

    pH=−log⁡(5.27×10−6)≈5.28\text{pH} = -\log(5.27 \times 10^{-6}) \approx 5.28

    You applied the definition of pH\text{pH} correctly, but the numerical result was affected by the earlier dilution error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the equivalence point solution contains the weak acid NH4+\text{NH}_4^+.

You accurately calculated KaK_a from KbK_b and KwK_w.

You correctly applied the weak acid hydrolysis approximation [H3O+]=Ka⋅C[\text{H}_3\text{O}^+] = \sqrt{K_a \cdot C} and computed the pH.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Dilution Factor

You used the stock concentration 0.100 M0.100\text{ M} as the salt concentration without dividing by 2 to account for mixing equal volumes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to recalculate molarity after mixing solutions. When two solutions are mixed, the total volume increases, meaning all species concentrations must be recalculated using M1V1=M2V2M_1V_1 = M_2V_2 or by dividing the total moles by the total combined volume.

REASONING PATH
Your ACEpath teacher’s suggested approach
Volume Check upon Mixing
  • Whenever two solutions are combined, Vtotal=V1+V2V_{\text{total}} = V_1 + V_2.

  • Always calculate total moles first, then divide by VtotalV_{\text{total}} before entering any equilibrium expression.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. [NH4+]=0.100 M×V2V=0.0500 M[\text{NH}_4^+] = \frac{0.100\text{ M} \times V}{2V} = 0.0500\text{ M}

  2. Ka=1.00×10−141.80×10−5=5.56×10−10K_a = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} = 5.56 \times 10^{-10}

  3. [H3O+]=Ka⋅[NH4+]=5.56×10−10×0.0500=5.27×10−6 M[\text{H}_3\text{O}^+] = \sqrt{K_a \cdot [\text{NH}_4^+]} = \sqrt{5.56 \times 10^{-10} \times 0.0500} = 5.27 \times 10^{-6}\text{ M}

  4. pH=−log⁡(5.27×10−6)=5.28\text{pH} = -\log(5.27 \times 10^{-6}) = 5.28

Final answer

pH=5.28\text{pH} = 5.28

NEXT STEPS
Final Takeaways from Your Teacher
  • Whenever a problem states 'equal volumes are mixed', immediately note that concentrations of unreacted or formed solutes are halved.

  • Practice setting up an initial millimole table (n=M×Vn = M \times V) before converting back to molarity using VtotalV_{\text{total}}.

OverviewACEpath Teacher's Diagnosis

02 The student treats NH4+ as a base and directly uses Kb to find [OH-] instead of calculating Ka to find [H3O+].

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [NH4+]=0.1002=0.0500 M[\text{NH}_4^+] = \frac{0.100}{2} = 0.0500\text{ M}

  2. Step 2

    [OH−]=Kb×[NH4+]=1.80×10−5×0.0500=9.49×10−4 M[\text{OH}^-] = \sqrt{K_b \times [\text{NH}_4^+]} = \sqrt{1.80 \times 10^{-5} \times 0.0500} = 9.49 \times 10^{-4}\text{ M}

    Correct

    Ka=KwKb=1.00×10−141.80×10−5=5.56×10−10  ⟹  [H3O+]=Ka×[NH4+]=5.56×10−10×0.0500≈5.27×10−6 MK_a = \frac{K_w}{K_b} = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} = 5.56 \times 10^{-10} \implies [\text{H}_3\text{O}^+] = \sqrt{K_a \times [\text{NH}_4^+]} = \sqrt{5.56 \times 10^{-10} \times 0.0500} \approx 5.27 \times 10^{-6}\text{ M}

    The ammonium ion NH4+\text{NH}_4^+ is the conjugate acid of NH3\text{NH}_3, not a base. It donates protons to water according to NH4++H2O⇌NH3+H3O+\text{NH}_4^+ + \text{H}_2\text{O} \rightleftharpoons \text{NH}_3 + \text{H}_3\text{O}^+, which requires using Ka=KwKbK_a = \frac{K_w}{K_b} to find [H3O+][\text{H}_3\text{O}^+], rather than using KbK_b to find [OH−][\text{OH}^-].

  3. Step 3

    pOH=−log⁡(9.49×10−4)=3.02  ⟹  pH=14.00−3.02=10.98\text{pOH} = -\log(9.49 \times 10^{-4}) = 3.02 \implies \text{pH} = 14.00 - 3.02 = 10.98

    Correct

    pH=−log⁡[H3O+]=−log⁡(5.27×10−6)≈5.28\text{pH} = -\log[\text{H}_3\text{O}^+] = -\log(5.27 \times 10^{-6}) \approx 5.28

    Because you solved for [OH−][\text{OH}^-] instead of [H3O+][\text{H}_3\text{O}^+], your subsequent pOH\text{pOH} and pH\text{pH} calculations propagated the error, leading to a basic pH\text{pH} rather than the expected acidic pH\text{pH}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that equal volumes of equimolar reactants double the total volume and halve the salt concentration to 0.0500 M0.0500\text{ M}.

You correctly applied the weak-electrolyte square-root approximation for equilibrium ion concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conjugate Acid-Base Hydrolysis Misidentification

You treated the ammonium cation NH4+\text{NH}_4^+ as a base and used KbK_b directly to calculate [OH−][\text{OH}^-].

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the acid-base nature of a salt's cation with its neutral parent base. The salt NH4NO3\text{NH}_4\text{NO}_3 produces NH4+\text{NH}_4^+, which is a Brønsted-Lowry conjugate acid that hydrolyzes water to form H3O+\text{H}_3\text{O}^+, requiring Ka=KwKbK_a = \frac{K_w}{K_b}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Ion Identity and Hydrolysis Behavior
  • Cations derived from weak bases (such as NH4+\text{NH}_4^+) act as weak acids (Ka=KwKbK_a = \frac{K_w}{K_b}); anions derived from weak acids (such as CH3COO−\text{CH}_3\text{COO}^-) act as weak bases (Kb=KwKaK_b = \frac{K_w}{K_a}).

  • Write the chemical equilibrium equation with water before selecting an equilibrium constant: NH4++H2O⇌NH3+H3O+\text{NH}_4^+ + \text{H}_2\text{O} \rightleftharpoons \text{NH}_3 + \text{H}_3\text{O}^+.

Sanity Check the Equivalence Point pH
  • Strong acid + Weak base →\rightarrow Acidic equivalence point (pH<7\text{pH} < 7).

  • If you obtain pH>7\text{pH} > 7 for a titration involving a strong acid and a weak base, pause and verify whether you solved for [H3O+][\text{H}_3\text{O}^+] via KaK_a or [OH−][\text{OH}^-] via KbK_b.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the acid dissociation constant for NH4+\text{NH}_4^+: Ka=1.00×10−141.80×10−5≈5.56×10−10K_a = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} \approx 5.56 \times 10^{-10}.

  2. Set up the equilibrium for hydrolysis: NH4++H2O⇌NH3+H3O+\text{NH}_4^+ + \text{H}_2\text{O} \rightleftharpoons \text{NH}_3 + \text{H}_3\text{O}^+, where [H3O+]≈Ka×[NH4+][\text{H}_3\text{O}^+] \approx \sqrt{K_a \times [\text{NH}_4^+]}.

  3. Evaluate the hydronium concentration: [H3O+]=5.56×10−10×0.0500=2.78×10−11≈5.27×10−6 M[\text{H}_3\text{O}^+] = \sqrt{5.56 \times 10^{-10} \times 0.0500} = \sqrt{2.78 \times 10^{-11}} \approx 5.27 \times 10^{-6}\text{ M}.

  4. Calculate the pH: pH=−log⁡(5.27×10−6)≈5.28\text{pH} = -\log(5.27 \times 10^{-6}) \approx 5.28.

Final answer

pH=5.28\text{pH} = 5.28

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the explicit hydrolysis equilibrium reaction showing whether H3O+\text{H}_3\text{O}^+ or OH−\text{OH}^- is released.

  • Practice converting between conjugate pairs using Ka×Kb=Kw=1.00×10−14K_a \times K_b = K_w = 1.00 \times 10^{-14} at 25∘C25^\circ\text{C}.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies Kw by Kb instead of dividing Kw by Kb to determine Ka for the conjugate acid NH4+.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [NH4+]=0.1002=0.0500 M[\text{NH}_4^+] = \frac{0.100}{2} = 0.0500\text{ M}

  2. Step 2

    Ka=Kw×Kb=(1.00×10−14)×(1.80×10−5)=1.80×10−19K_a = K_w \times K_b = (1.00 \times 10^{-14}) \times (1.80 \times 10^{-5}) = 1.80 \times 10^{-19}

    Correct

    Ka=KwKb=1.00×10−141.80×10−5≈5.56×10−10K_a = \frac{K_w}{K_b} = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} \approx 5.56 \times 10^{-10}

    For a conjugate acid-base pair, the equilibrium constants are related by Ka×Kb=KwK_a \times K_b = K_w. To find KaK_a, you must divide KwK_w by KbK_b, rather than multiplying them.

  3. Step 3

    [H3O+]=1.80×10−19×0.0500=9.49×10−11 M[\text{H}_3\text{O}^+] = \sqrt{1.80 \times 10^{-19} \times 0.0500} = 9.49 \times 10^{-11}\text{ M}

    Correct

    [H3O+]=Ka×[NH4+]=5.56×10−10×0.0500≈5.27×10−6 M[\text{H}_3\text{O}^+] = \sqrt{K_a \times [\text{NH}_4^+]} = \sqrt{5.56 \times 10^{-10} \times 0.0500} \approx 5.27 \times 10^{-6}\text{ M}

    Your hydrolysis expression [H3O+]=Ka⋅C[\text{H}_3\text{O}^+] = \sqrt{K_a \cdot C} is algebraically correct, but the numerical result is affected by your incorrect KaK_a value.

  4. Step 4

    pH=−log⁡(9.49×10−11)=10.02\text{pH} = -\log(9.49 \times 10^{-11}) = 10.02

    Correct

    pH=−log⁡(5.27×10−6)≈5.28\text{pH} = -\log(5.27 \times 10^{-6}) \approx 5.28

    Your final calculation correctly evaluated −log⁡[H3O+]-\log[\text{H}_3\text{O}^+] from your previous line, but it carries forward the earlier error and results in a basic pH rather than the expected acidic pH.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that mixing equal volumes doubles the total volume and halves the concentration of NH4+\text{NH}_4^+.

You correctly set up the weak-acid equilibrium formula [H3O+]=Ka⋅C[\text{H}_3\text{O}^+] = \sqrt{K_a \cdot C} for the hydrolysis of a conjugate acid.

You applied the definition pH=−log⁡[H3O+]\text{pH} = -\log[\text{H}_3\text{O}^+] accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conjugate Pair Constant Relationship Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled that KwK_w, KaK_a, and KbK_b are linked in a multiplicative identity (Ka×Kb=KwK_a \times K_b = K_w), but you algebraically inverted the formula and computed Kw×KbK_w \times K_b instead of solving for Ka=KwKbK_a = \frac{K_w}{K_b}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conjugate Acid-Base Pair Identity
  • For any conjugate acid-base pair in water at 25∘C25^\circ\text{C}, Ka×Kb=Kw=1.00×10−14K_a \times K_b = K_w = 1.00 \times 10^{-14}.

  • Always isolate the unknown constant by division: Ka=KwKbK_a = \frac{K_w}{K_b} and Kb=KwKaK_b = \frac{K_w}{K_a}.

Equivalence Point Sanity Check
  • Neutralizing a weak base with a strong acid produces an acidic salt solution with pH<7.00\text{pH} < 7.00.

  • Check whether your calculated pH makes qualitative chemical sense; getting pH=10.02\text{pH} = 10.02 for an acidic cation should immediately alert you to an error in KaK_a.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Ka=KwKb=1.00×10−141.80×10−5≈5.56×10−10K_a = \frac{K_w}{K_b} = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} \approx 5.56 \times 10^{-10}

  2. [H3O+]=Ka×[NH4+]=5.56×10−10×0.0500=2.78×10−11≈5.27×10−6 M[\text{H}_3\text{O}^+] = \sqrt{K_a \times [\text{NH}_4^+]} = \sqrt{5.56 \times 10^{-10} \times 0.0500} = \sqrt{2.78 \times 10^{-11}} \approx 5.27 \times 10^{-6}\text{ M}

  3. pH=−log⁡(5.27×10−6)≈5.28\text{pH} = -\log(5.27 \times 10^{-6}) \approx 5.28

Final answer

pH=5.28\text{pH} = 5.28

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship Ka×Kb=KwK_a \times K_b = K_w and practice rearranging it to solve for both KaK_a and KbK_b.

  • Always perform a qualitative check at the end of acid-base titration calculations: salt of weak base + strong acid must be acidic (pH<7\text{pH} < 7).

Lock it in

Similar question

01

If 25.0 mL25.0\text{ mL} of 0.200 M NH30.200\text{ M }\text{NH}_3 (Kb=1.80×10−5K_b = 1.80 \times 10^{-5}) is titrated with 25.0 mL25.0\text{ mL} of 0.200 M HCl0.200\text{ M }\text{HCl}, calculate the concentration of NH4+\text{NH}_4^+ formed at the equivalence point and the resulting solution pH at 25∘C25^\circ\text{C}.

Answer

[NH4+]=0.100 M[\text{NH}_4^+] = 0.100\text{ M} (since volume doubles from 25 mL25\text{ mL} to 50 mL50\text{ mL}). Then Ka=1.00×10−141.80×10−5=5.56×10−10K_a = \frac{1.00 \times 10^{-14}}{1.80 \times 10^{-5}} = 5.56 \times 10^{-10}. [H3O+]=5.56×10−10×0.100=7.46×10−6 M[\text{H}_3\text{O}^+] = \sqrt{5.56 \times 10^{-10} \times 0.100} = 7.46 \times 10^{-6}\text{ M}, so pH=−log⁡(7.46×10−6)=5.13\text{pH} = -\log(7.46 \times 10^{-6}) = 5.13.

02

A student mixes 40.0 mL40.0\text{ mL} of 0.150 M pyridine0.150\text{ M }\text{pyridine} (C5H5N\text{C}_5\text{H}_5\text{N}, Kb=1.70×10−9K_b = 1.70 \times 10^{-9}) with 40.0 mL40.0\text{ mL} of 0.150 M HNO30.150\text{ M }\text{HNO}_3. Calculate the pH of the resulting solution at 25∘C25^\circ\text{C}.

Answer

At the equivalence point, [C5H5NH+]=0.150 M2=0.0750 M[\text{C}_5\text{H}_5\text{NH}^+] = \frac{0.150\text{ M}}{2} = 0.0750\text{ M}. Ka=1.00×10−141.70×10−9=5.88×10−6K_a = \frac{1.00 \times 10^{-14}}{1.70 \times 10^{-9}} = 5.88 \times 10^{-6}. [H3O+]=Ka×[C5H5NH+]=5.88×10−6×0.0750=6.64×10−4 M[\text{H}_3\text{O}^+] = \sqrt{K_a \times [\text{C}_5\text{H}_5\text{NH}^+]} = \sqrt{5.88 \times 10^{-6} \times 0.0750} = 6.64 \times 10^{-4}\text{ M}. Therefore, pH=−log⁡(6.64×10−4)=3.18\text{pH} = -\log(6.64 \times 10^{-4}) = 3.18.

03

A 50.0 mL50.0\text{ mL} sample of 0.100 M NH30.100\text{ M }\text{NH}_3 is titrated with 0.200 M HCl0.200\text{ M }\text{HCl}. Find the volume of acid needed to reach equivalence, the salt concentration [NH4+][\text{NH}_4^+] at that point, and the final pH (Kb=1.80×10−5K_b = 1.80 \times 10^{-5}).

Answer

Moles of NH3=0.0500 L×0.100 M=0.00500 mol\text{NH}_3 = 0.0500\text{ L} \times 0.100\text{ M} = 0.00500\text{ mol}. Required volume of HCl=0.00500 mol0.200 M=0.0250 L=25.0 mL\text{HCl} = \frac{0.00500\text{ mol}}{0.200\text{ M}} = 0.0250\text{ L} = 25.0\text{ mL}. Total volume =50.0+25.0=75.0 mL=0.0750 L= 50.0 + 25.0 = 75.0\text{ mL} = 0.0750\text{ L}. [NH4+]=0.00500 mol0.0750 L=0.0667 M[\text{NH}_4^+] = \frac{0.00500\text{ mol}}{0.0750\text{ L}} = 0.0667\text{ M}. Ka=5.56×10−10K_a = 5.56 \times 10^{-10}. [H3O+]=5.56×10−10×0.0667=6.09×10−6 M[\text{H}_3\text{O}^+] = \sqrt{5.56 \times 10^{-10} \times 0.0667} = 6.09 \times 10^{-6}\text{ M}. pH=−log⁡(6.09×10−6)=5.22\text{pH} = -\log(6.09 \times 10^{-6}) = 5.22.

Loading workspace…