Resources

An analytical chemist measures the vapor pressure of two isomeric organic liquids, ethanol (CH3CH2OH\text{CH}_3\text{CH}_2\text{OH}) and dimethyl ether (CH3OCH3\text{CH}_3\text{OCH}_3), both having the molecular formula C2H6O\text{C}_2\text{H}_6\text{O} (molar mass 46.07 g/mol46.07\text{ g/mol}) at 20.0∘C20.0^\circ\text{C}. The vapor pressures are determined to be 5.85 kPa5.85\text{ kPa} and 533 kPa533\text{ kPa}. Determine the ratio of the vapor pressure of dimethyl ether to that of ethanol at this temperature, and explain which structural feature and specific intermolecular force causes the lower-vapor-pressure isomer to exhibit a higher enthalpy of vaporization (ΔHvap\Delta H_{\text{vap}}).

Answer and steps

Final answer

Ratio: PetherPethanol=91.1\frac{P_{\text{ether}}}{P_{\text{ethanol}}} = 91.1; Ethanol has the lower vapor pressure and higher ΔHvap\Delta H_{\text{vap}} because its hydroxyl group (O−H\text{O}-\text{H}) forms extensive intermolecular hydrogen bonds, whereas dimethyl ether lacks an H\text{H} bonded directly to O\text{O} and possesses only weaker dipole-dipole attractions and London dispersion forces.

Steps

01

Assign Vapor Pressures to the Isomers

Vapor pressure reflects the tendency of molecules to escape from the liquid phase into the gas phase. Stronger attractive forces between molecules hold them more tightly in the liquid, leading to a lower vapor pressure and a higher enthalpy of vaporization (ΔHvap\Delta H_{\text{vap}}).

  • Ethanol (CHX3CHX2OH\ce{CH3CH2OH}): Contains an −OH\ce{-OH} (hydroxyl) group, where hydrogen is directly bonded to an electronegative oxygen atom. This allows ethanol molecules to form strong intermolecular hydrogen bonds in addition to dipole-dipole interactions and London dispersion forces.
  • Dimethyl ether (CHX3OCHX3\ce{CH3OCH3}): Although polar, all hydrogen atoms are bonded directly to carbon atoms (C−H\ce{C-H}), not to oxygen. Therefore, dimethyl ether cannot form intermolecular hydrogen bonds with itself; its molecules are held together only by weaker dipole-dipole attractions and London dispersion forces.

Because ethanol has significantly stronger intermolecular forces, it has the lower vapor pressure of the two isomers at 20.0∘C20.0^\circ\text{C}: Pethanol=5.85 kPaP_{\text{ethanol}} = 5.85\text{ kPa} Pether=533 kPaP_{\text{ether}} = 533\text{ kPa}


02

Calculate the Ratio of Vapor Pressures

To find the ratio of the vapor pressure of dimethyl ether to that of ethanol:

Ratio=PetherPethanol=533 kPa5.85 kPa≈91.1\text{Ratio} = \frac{P_{\text{ether}}}{P_{\text{ethanol}}} = \frac{533\text{ kPa}}{5.85\text{ kPa}} \approx 91.1


03

Link Structural Features to Physical Properties

  • Key Structural Difference: Ethanol possesses a terminal hydroxyl group (−OH\ce{-OH}), whereas dimethyl ether has a symmetrical ether linkage (C−O−C\ce{C-O-C}).
  • Effect on ΔHvap\Delta H_{\text{vap}}: Overcoming strong intermolecular hydrogen bonds requires substantially more energy per mole than overcoming dipole-dipole interactions. Consequently, ethanol requires more heat to transition from liquid to gas, giving it a much higher enthalpy of vaporization (ΔHvap\Delta H_{\text{vap}}) alongside its lower vapor pressure.

Common Pitfall: Do not confuse intramolecular covalent bonds with intermolecular forces. Vaporization does not break the covalent bonds within the molecule (such as the O−H\ce{O-H} or C−O\ce{C-O} bonds); it only disrupts the noncovalent attractions between adjacent molecules.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio by dividing the vapor pressure of ethanol by that of dimethyl ether.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ratio=5.85 kPa533 kPa  ⟹  Ratio=0.0110\text{Ratio} = \frac{5.85\text{ kPa}}{533\text{ kPa}} \implies \text{Ratio} = 0.0110

    Correct

    Ratio=PetherPethanol=533 kPa5.85 kPa≈91.1\text{Ratio} = \frac{P_{\text{ether}}}{P_{\text{ethanol}}} = \frac{533\text{ kPa}}{5.85\text{ kPa}} \approx 91.1

    The prompt asked for the ratio of the vapor pressure of dimethyl ether to that of ethanol (PetherPethanol\frac{P_{\text{ether}}}{P_{\text{ethanol}}}), but you calculated the reciprocal ratio (PethanolPether\frac{P_{\text{ethanol}}}{P_{\text{ether}}}).

  2. Step 2

    Ethanol has an -OH group capable of hydrogen bonding, while dimethyl ether only has dipole-dipole forces.

  3. Step 3

    Hydrogen bonds are much stronger, so ethanol requires more energy to vaporize, giving it a higher enthalpy of vaporization.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the hydroxyl group (−OH-\text{OH}) in ethanol as the structural feature enabling hydrogen bonding.

You correctly recognized that dimethyl ether exhibits only dipole-dipole attractions and London dispersion forces.

You clearly reasoned that stronger intermolecular forces require more energy to overcome, resulting in a higher enthalpy of vaporization.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ratio setup

You accidentally placed ethanol's vapor pressure in the numerator and dimethyl ether's vapor pressure in the denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting the phrasing 'ratio of A to B' as B/AB / A instead of A/BA / B.

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpreting 'Ratio of A to B'
  • The verbal expression 'ratio of AA to BB' always translates mathematically to AB\frac{A}{B}.

  • Write the algebraic fraction with the named quantities first (e.g., PAPB\frac{P_A}{P_B}) before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the numerator and denominator from the prompt: the ratio of dimethyl ether to ethanol is PetherPethanol\frac{P_{\text{ether}}}{P_{\text{ethanol}}}.

  2. Substitute the measured vapor pressures: 533 kPa5.85 kPa\frac{533\text{ kPa}}{5.85\text{ kPa}}.

  3. Evaluate the quotient: 5335.85≈91.1\frac{533}{5.85} \approx 91.1.

Final answer

Ratio=91.1\text{Ratio} = 91.1

NEXT STEPS
Final Takeaways from Your Teacher
  • Before plugging in numbers, write out the explicit fraction with descriptive labels (e.g., PetherPethanol\frac{P_{\text{ether}}}{P_{\text{ethanol}}}) to ensure the numerator and denominator match the question phrasing.

  • Perform a sanity check on the calculated magnitude: since dimethyl ether is much more volatile, its vapor pressure should be much higher than ethanol's, so the ratio PetherPethanol\frac{P_{\text{ether}}}{P_{\text{ethanol}}} must be significantly greater than 11.

OverviewACEpath Teacher's Diagnosis

02 The student attributes the difference in vaporization enthalpy to breaking intramolecular covalent bonds rather than intermolecular hydrogen bonds.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ratio=533 kPa/5.85 kPa  ⟹  Ratio=91.1\text{Ratio} = 533\text{ kPa} / 5.85\text{ kPa} \implies \text{Ratio} = 91.1

  2. Step 2

    Ethanol has an O−H\ce{O-H} covalent bond whereas dimethyl ether has C−O\ce{C-O} covalent bonds. The O−H\ce{O-H} covalent bond is stronger and requires more energy to break during vaporization, causing a higher enthalpy of vaporization.

    Correct

    Ethanol possesses a polar hydroxyl group (−OH-\ce{OH}), enabling it to form strong intermolecular hydrogen bonds between molecules. Dimethyl ether lacks an H\ce{H} directly bonded to O\ce{O} and is held together only by weaker dipole-dipole attractions and London dispersion forces. Vaporization disrupts intermolecular attractions, not covalent bonds; because hydrogen bonds require more energy to overcome, ethanol has a higher ΔHvap\Delta H_{\text{vap}} and a lower vapor pressure.

    Vaporization is a physical change that overcomes intermolecular attractions between separate molecules, not the intramolecular covalent bonds holding individual atoms together within a molecule.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the vapor pressure ratio as 91.191.1.

You recognized that ethanol contains an −OH\ce{-OH} group while dimethyl ether contains C−O\ce{C-O} bonds.

You correctly linked higher required energy during vaporization to a larger enthalpy of vaporization.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Intermolecular Forces with Intramolecular Covalent Bonds

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated vaporization as a chemical process that breaks intramolecular covalent bonds (extO−extH ext{O}- ext{H} vs. extC−extO ext{C}- ext{O}) rather than a physical transition that overcomes non-covalent intermolecular attractions (hydrogen bonding vs. dipole-dipole forces).

REASONING PATH
Your ACEpath teacher’s suggested approach
Phase Transitions Disrupt Non-Covalent Interactions
  • Boiling, melting, and evaporation disrupt intermolecular forces between molecules, leaving intramolecular covalent bonds completely intact.

  • Whenever evaluating boiling point, vapor pressure, or ΔHvap\Delta H_{\text{vap}}, identify the intermolecular forces (such as hydrogen bonding, dipole-dipole, or dispersion) rather than covalent bond energies.

Requirements for Intermolecular Hydrogen Bonding
  • Hydrogen bonding requires a hydrogen atom covalently bonded to a highly electronegative atom (N\ce{N}, O\ce{O}, or F\ce{F}) acting as a donor to an electronegative lone pair acceptor.

  • Check if an active O−H\ce{O-H}, N−H\ce{N-H}, or F−H\ce{F-H} bond is present to form intermolecular hydrogen bonds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the type of physical change: Vaporization transitions liquid molecules into gas-phase molecules without breaking internal covalent bonds.

  2. Identify intermolecular forces in ethanol: The terminal −OH-\ce{OH} group allows ethanol molecules to form strong intermolecular hydrogen bonds.

  3. Identify intermolecular forces in dimethyl ether: All hydrogens are attached to carbons (C−H\ce{C-H}), so it only exhibits weaker dipole-dipole forces and London dispersion forces.

  4. Connect forces to ΔHvap\Delta H_{\text{vap}}: Disrupting the strong hydrogen bonds in liquid ethanol requires more thermal energy per mole, resulting in a higher ΔHvap\Delta H_{\text{vap}} and a lower vapor pressure.

Final answer

Ratio =91.1= 91.1; Ethanol has the lower vapor pressure and higher ΔHvap\Delta H_{\text{vap}} because its hydroxyl group forms intermolecular hydrogen bonds, which require significantly more energy to overcome during vaporization than the weaker dipole-dipole attractions in dimethyl ether.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between intramolecular covalent bonding within a molecule and intermolecular non-covalent attractions between molecules.

  • Practice identifying the strongest intermolecular force present in pure samples of organic functional groups (alcohols, ethers, ketones, alkanes).

  • Work through phase transition problems by explicitly stating the intermolecular force being disrupted upon heating.

Lock it in

Similar question

01

At 25∘C25^\circ\text{C}, liquid XX has a vapor pressure of 12.5 kPa12.5\text{ kPa} and liquid YY has a vapor pressure of 100.0 kPa100.0\text{ kPa}. Determine the ratio of the vapor pressure of liquid YY to liquid XX.

Answer

Ratio =PYPX=100.0 kPa12.5 kPa=8.00= \frac{P_Y}{P_X} = \frac{100.0\text{ kPa}}{12.5\text{ kPa}} = 8.00.

02

Two constitutional isomers, 1-propanol (CHX3CHX2CHX2OH\ce{CH3CH2CH2OH}) and ethyl methyl ether (CHX3CHX2OCHX3\ce{CH3CH2OCH3}), have vapor pressures of 2.80 kPa2.80\text{ kPa} and 104 kPa104\text{ kPa} at 25∘C25^\circ\text{C}. Calculate the ratio of the vapor pressure of ethyl methyl ether to that of 1-propanol, and state which isomer has the greater molar enthalpy of vaporization (ΔHvap\Delta H_{\text{vap}}).

Answer

Ratio=PetherPpropanol=104 kPa2.80 kPa≈37.1\text{Ratio} = \frac{P_{\text{ether}}}{P_{\text{propanol}}} = \frac{104\text{ kPa}}{2.80\text{ kPa}} \approx 37.1. 1-Propanol has the greater ΔHvap\Delta H_{\text{vap}} because overcoming intermolecular hydrogen bonds requires significantly more energy than overcoming dipole-dipole attractions.

03

Substances AA and BB have normal boiling points of 350 K350\text{ K} and 420 K420\text{ K}, respectively. At 300 K300\text{ K}, their vapor pressures are PA=24.0 kPaP_A = 24.0\text{ kPa} and PB=1.60 kPaP_B = 1.60\text{ kPa}. Calculate the ratio of the vapor pressure of substance BB to that of substance AA, and determine the ratio of the normal boiling point of BB to that of AA.

Answer

Vapor pressure ratio: PBPA=1.60 kPa24.0 kPa≈0.0667\frac{P_B}{P_A} = \frac{1.60\text{ kPa}}{24.0\text{ kPa}} \approx 0.0667 (or 115\frac{1}{15}). Boiling point ratio: Tb,BTb,A=420 K350 K=1.20\frac{T_{b,B}}{T_{b,A}} = \frac{420\text{ K}}{350\text{ K}} = 1.20.

Loading workspace…