Resources

Arrange the following neutral main-group elements in order of increasing reactivity when placed in liquid water at 298 K298\text{ K}: magnesium (Mg\text{Mg}), sodium (Na\text{Na}), and potassium (K\text{K}). Justify your order based on first ionization energy trends (I1I_1) and periodic trends in effective nuclear charge (ZeffZ_{\text{eff}}).

Answer and steps

Final answer

Mg<Na<K\text{Mg} < \text{Na} < \text{K}. Alkali metals are significantly more reactive with water than alkaline earth metals because Group 1 elements possess lower first ionization energies (I1I_1) than adjacent Group 2 elements across the same period due to greater shielding and lower ZeffZ_{\text{eff}} on the single valence ss-electron. Down Group 1, principal quantum number increases from n=3n = 3 (Na\text{Na}) to n=4n = 4 (K\text{K}), increasing valence shell radius and decreasing coulombic attraction, resulting in a lower I1I_1 for potassium (418.8 kJ/mol418.8\text{ kJ/mol}) than sodium (495.8 kJ/mol495.8\text{ kJ/mol}), making K\text{K} the most vigorously reactive.

Steps

01

Connection Between Metal Reactivity and Ionization Energy

When an active main-group metal reacts with liquid water, it undergoes oxidation by losing valence electrons to form aqueous cations and reduce water to hydrogen gas: 2 M(s)+2 HX2O(l)→2 MX+(aq)+2 OHX−(aq)+HX2(g)\ce{2M(s) + 2H2O(l) -> 2M+(aq) + 2OH-(aq) + H2(g)} Because the initial and rate-limiting step of this oxidation involves removing the outermost electron, a lower first ionization energy (I1I_1) corresponds to easier electron loss and significantly greater chemical reactivity.


02

Comparing Across a Period: Sodium (Na\ce{Na}) vs. Magnesium (Mg\ce{Mg})

Both sodium (Z=11Z = 11) and magnesium (Z=12Z = 12) have valence electrons in the third principal energy level (n=3n = 3) with an identical neon core ([Ne][\ce{Ne}]).

  • Effective Nuclear Charge (ZeffZ_{\text{eff}}): Moving left to right across Period 3, the nuclear charge increases by +1+1 while inner-shell electron shielding remains nearly constant. Therefore, the valence electrons in Mg\ce{Mg} experience a noticeably higher ZeffZ_{\text{eff}} than the single valence electron in Na\ce{Na}.
  • Ionization Energy (I1I_1): Because of the higher ZeffZ_{\text{eff}}, the atomic radius of Mg\ce{Mg} is smaller, and its valence electrons are held more tightly to the nucleus. As a result, Mg\ce{Mg} has a substantially higher first ionization energy (I1≈738 kJ/molI_1 \approx 738\text{ kJ/mol}) compared to Na\ce{Na} (I1≈496 kJ/molI_1 \approx 496\text{ kJ/mol}).
  • Reactivity Difference: Sodium reacts rapidly and exothermically with liquid water at 298 K298\text{ K}, whereas magnesium reacts extremely sluggishly with room-temperature liquid water (often forming a passivating hydroxide film). Thus, Mg<Na\ce{Mg < Na}.

03

Comparing Down a Group: Sodium (Na\ce{Na}) vs. Potassium (K\ce{K})

Both sodium and potassium are Group 1 alkali metals, each having one valence ss-electron (ns1ns^1).

  • Valence Shell Distance (nn): In sodium, the valence electron is in the n=3n = 3 shell; in potassium, it occupies the n=4n = 4 shell.
  • Coulombic Attraction: Although potassium has a higher total nuclear charge (Z=19Z = 19), the additional inner shell of electrons provides strong shielding. The increased distance between the nucleus and the valence electron dramatically weakens the electrostatic (coulombic) attraction according to Coulomb's Law: F∝Zeffr2F \propto \frac{Z_{\text{eff}}}{r^2}
  • Ionization Energy (I1I_1): Due to the larger atomic radius, potassium has a lower first ionization energy (I1≈419 kJ/molI_1 \approx 419\text{ kJ/mol}) than sodium (I1≈496 kJ/molI_1 \approx 496\text{ kJ/mol}).
  • Reactivity Difference: Because potassium sheds its valence electron more readily, it reacts much more vigorously and explosively with water than sodium. Thus, Na<K\ce{Na < K}.

04

Common Pitfall to Avoid

  • Nuclear Charge vs. Effective Nuclear Charge: Do not assume that a higher atomic number (ZZ) always binds electrons more tightly. In going down a group, the increase in distance and shielding by inner shells outweighs the increase in nuclear charge, resulting in a lower ionization energy and higher reactivity.

05

Final Order of Reactivity

Combining both periodic trends gives the order of increasing reactivity: Mg<Na<K\ce{Mg < Na < K}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses ionization energy trends with reactivity, assuming that a higher ionization energy means more energy is released and therefore causes higher reactivity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Across Period 3 from Na\text{Na} to Mg\text{Mg}, nuclear charge, so ZeffZ_{\text{eff}} increases. Higher ZeffZ_{\text{eff}} pulls electrons closer, making Mg\text{Mg} have a higher I1I_1 than Na\text{Na}.

  2. Step 2

    Down Group 1 from Na\text{Na} to K\text{K}, valence electrons are in higher shells with more shielding, so Na\text{Na} has higher I1I_1 than K\text{K}.

  3. Step 3

    Ionization energy: K<Na<Mg\text{K} < \text{Na} < \text{Mg}.

  4. Step 4

    Higher ionization energy gives more energy to react vigerously with water, so reactivity order is K<Na<Mg\text{K} < \text{Na} < \text{Mg}.

    Correct

    Reacting with water requires the metal to lose its valence electron(s) (oxidation: M→MX++eX−\ce{M -> M+ + e-}). A lower first ionization energy means less energy is required to remove the electron, which facilitates faster and more vigorous oxidation. Therefore, lower I1I_1 corresponds to higher reactivity: Mg<Na<K\text{Mg} < \text{Na} < \text{K}.

    Ionization energy is an energy penalty that must be absorbed to remove an electron, not energy released during the reaction. Consequently, metals with smaller ionization energies lose electrons more readily and react more vigorously with water.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied periodic trends to deduce that effective nuclear charge increases across Period 3.

You accurately recognized that increasing electron shells down Group 1 increases shielding and lowers ionization energy.

You properly deduced the relative order of first ionization energies as K<Na<Mg\text{K} < \text{Na} < \text{Mg}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Thermodynamic vs. kinetic misinterpretation of ionization energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated ionization energy as energy released or supplied by the atom to power the reaction, rather than as an endothermic energy barrier that must be overcome to oxidize the neutral metal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Ionization Energy
  • Ionization energy (I1I_1) is strictly endothermic (ΔH>0\Delta H > 0); it is the minimum energy required to remove an electron from an isolated gas-phase atom.

  • Always view ionization energy as an energy obstacle or cost: smaller cost means easier oxidation.

Metal Oxidation with Water
  • Metals react with liquid water by undergoing oxidation (M(s)→MXn+(aq)+n eX−\ce{M(s) -> M^{n+}(aq) + n e-}).

  • Relate low ionization energy directly to high metallic reactivity, because removing electrons requires less energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that the redox reaction with water requires neutral metal atoms to lose electrons: 2 M(s)+2 HX2O(l)→2 MX+(aq)+2 OHX−(aq)+HX2(g)\ce{2M(s) + 2H2O(l) -> 2M+(aq) + 2OH-(aq) + H2(g)}.

  2. Because ionization energy measures the energy barrier required to remove a valence electron, a lower I1I_1 means the metal is oxidized much more readily.

  3. Since K\text{K} has the lowest I1I_1 (419 kJ/mol419\text{ kJ/mol}), it loses its valence electron most easily and reacts most violently, followed by Na\text{Na} (496 kJ/mol496\text{ kJ/mol}), while Mg\text{Mg} has the highest I1I_1 (738 kJ/mol738\text{ kJ/mol}) and reacts the least.

Final answer

Mg<Na<K\text{Mg} < \text{Na} < \text{K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the thermochemical definition of ionization energy to solidify that it is an input cost rather than energy released.

  • Practice predicting relative oxidation ease by relating I1I_1 values inversely to metallic character and reactivity.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly assumes that effective nuclear charge increases down a group because the total number of protons increases, concluding that potassium holds electrons more tightly than sodium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Across Period 3, Mg\text{Mg} has more protons than Na\text{Na} with the same core shielding, so Mg\text{Mg} has higher ZeffZ_{\text{eff}}, higher I1I_1, and is less reactive than Na\text{Na}.

  2. Step 2

    Down Group 1, K\text{K} has 19 protons compared to 11 for Na\text{Na}, so K\text{K} has a much higher ZeffZ_{\text{eff}} than Na\text{Na}. Because of higher ZeffZ_{\text{eff}}, K\text{K} holds its valence electron tighter and has a higher I1I_1 than Na\text{Na}, making K\text{K} less reactive than Na\text{Na}.

    Correct

    Down Group 1, the increase in nuclear charge (+19+19 vs +11+11) is offset by an added inner shell of shielding electrons (1818 core electrons in K\text{K} vs 1010 in Na\text{Na}). The valence electron in K\text{K} is in the n=4n = 4 shell, farther from the nucleus than the n=3n = 3 electron in Na\text{Na}. This increased distance weakens coulombic attraction, resulting in a lower I1I_1 and greater reactivity for K\text{K} (extNa<extK ext{Na} < ext{K}).

    You conflated total nuclear charge (ZZ) with effective nuclear charge (ZeffZ_{\text{eff}}). Down a group, each added period introduces a complete inner shell of electrons that shields the added protons (Zeff≈+1Z_{\text{eff}} \approx +1 for both). Because potassium's valence electron occupies n=4n = 4 rather than n=3n = 3, it is farther from the nucleus and held less tightly, giving potassium a lower I1I_1 and higher reactivity.

  3. Step 3

    Reactivity order: Mg<K<Na\text{Mg} < \text{K} < \text{Na}.

    Correct

    Reactivity order: Mg<Na<K\text{Mg} < \text{Na} < \text{K}.

    Your overall ranking placed potassium before sodium because of the error in evaluating Group 1 ionization energies.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly deduced that higher first ionization energy corresponds to lower metal reactivity in water.

You correctly applied periodic trends across Period 3 to show that magnesium is less reactive than sodium.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Nuclear Charge with Effective Nuclear Charge Down a Group

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the total number of protons (ZZ) as the sole determinant of effective nuclear charge (ZeffZ_{\text{eff}}), neglecting the fact that additional filled inner shells cancel out the added nuclear charge and that an increasing principal energy level (nn) increases average distance from the nucleus, lowering I1I_1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Core Shielding Cancels Added Protons Down a Group
  • Zeff≈Z−SZ_{\text{eff}} \approx Z - S. For alkali metals, both Na\text{Na} (11−10=+111 - 10 = +1) and K\text{K} (19−18=+119 - 18 = +1) experience an effective nuclear charge of approximately +1+1.

  • Do not assume ZeffZ_{\text{eff}} increases significantly down a vertical column; focus on the principal quantum level nn and valence electron distance.

Distance Governs Down-Group Ionization Trends
  • By Coulomb's law, F∝q1q2r2F \propto \frac{q_1 q_2}{r^2}. As nn increases, atomic radius rr increases, drastically weakening the hold on the valence electron.

  • Conclude that lower in a metallic group, ionization energy decreases and reactivity with water increases.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Down Group 1, calculate the net effective nuclear charge: Na\text{Na} has Z=11Z = 11 with 1010 core electrons (Zeff≈+1Z_{\text{eff}} \approx +1), and K\text{K} has Z=19Z = 19 with 1818 core electrons (Zeff≈+1Z_{\text{eff}} \approx +1).

  2. Compare the principal energy levels: potassium's valence electron occupies n=4n = 4, while sodium's occupies n=3n = 3.

  3. Because rK>rNar_{\text{K}} > r_{\text{Na}}, potassium's valence electron experiences weaker coulombic attraction, meaning I1(K)<I1(Na)I_1(\text{K}) < I_1(\text{Na}).

  4. A lower I1I_1 means potassium loses its electron more easily to reduce water, making K\text{K} more reactive than Na\text{Na}.

Final answer

Mg<Na<K\text{Mg} < \text{Na} < \text{K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how core electrons shield the nucleus using Zeff≈Z−SZ_{\text{eff}} \approx Z - S for elements in the same group.

  • Practice comparing ionization energy trends down Group 1 and Group 2 by focusing on the valence shell principal quantum number nn.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the prompt's direction and arranges the elements in order of decreasing reactivity rather than increasing reactivity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Reactivity with water depends on how easily the metal loses an electron, which is inversely related to I1I_1.

  2. Step 2

    Across Period 3 from Na\text{Na} to Mg\text{Mg}, shielding is constant but nuclear charge increases, so ZeffZ_{\text{eff}} increases, I1I_1 increases, and Mg\text{Mg} is less reactive than Na\text{Na}.

  3. Step 3

    Down Group 1 from Na\text{Na} to K\text{K}, the valence electron occupies a larger principal quantum level (n=4n=4 vs n=3n=3), so I1I_1 decreases and K\text{K} is more reactive than Na\text{Na}.

  4. Step 4

    Reactivity order: K>Na>Mg\text{K} > \text{Na} > \text{Mg}

    Correct

    Mg<Na<K\text{Mg} < \text{Na} < \text{K}

    You arranged the elements from most reactive to least reactive (decreasing order), but the prompt asked for order of increasing reactivity (least reactive to most reactive).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly linked metal oxidation in water to first ionization energy.

You accurately analyzed effective nuclear charge and shielding across Period 3.

You clearly explained how principal quantum level affects ionization energy down Group 1.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Inequality Order

You inverted the requested sequence, providing decreasing reactivity (extK>extNa>extMg ext{K} > ext{Na} > ext{Mg}) instead of increasing reactivity (extMg<extNa<extK ext{Mg} < ext{Na} < ext{K}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating 'increasing order' with 'decreasing order' when writing the final relational statement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Order Check
  • 'Increasing order' requires starting with the lowest value and ending with the highest value (A<B<CA < B < C).

  • Before writing your final answer, circle the word 'increasing' or 'decreasing' in the prompt and verify that your inequality symbols open toward the higher values on the right.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Synthesize your comparisons: Mg\text{Mg} is less reactive than Na\text{Na} (Mg<Na\text{Mg} < \text{Na}), and Na\text{Na} is less reactive than K\text{K} (Na<K\text{Na} < \text{K}).

  2. Assemble the elements from lowest reactivity to highest reactivity using increasing order.

Final answer

Mg<Na<K\text{Mg} < \text{Na} < \text{K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always re-read the prompt prompt's ordering requirement ('increasing' vs 'decreasing') as your final sanity check before submitting.

Lock it in

Similar question

01

Arrange calcium (Ca\text{Ca}), potassium (K\text{K}), and rubidium (Rb\text{Rb}) in order of increasing reactivity with water at room temperature, and justify your answer using periodic trends in ionization energy.

Answer

Ca<K<Rb\text{Ca} < \text{K} < \text{Rb}. Ca\text{Ca} is in Group 2 while K\text{K} and Rb\text{Rb} are in Group 1; across Period 4, higher ZeffZ_{\text{eff}} gives Ca\text{Ca} a higher I1I_1 (590 kJ/mol590\text{ kJ/mol}) than K\text{K} (419 kJ/mol419\text{ kJ/mol}). Down Group 1, increased radius and shielding give Rb\text{Rb} an even lower I1I_1 (403 kJ/mol403\text{ kJ/mol}) than K\text{K}. Since lower I1I_1 leads to easier oxidation and faster reaction with water, reactivity increases as Ca<K<Rb\text{Ca} < \text{K} < \text{Rb}.

02

Explain why lithium (Li\text{Li}) reacts much more slowly with water than potassium (K\text{K}), referring to effective nuclear charge, principal quantum number, and valence electron removal.

Answer

Lithium's valence electron resides in n=2n = 2, much closer to the nucleus and with less inner shielding than potassium's valence electron in n=4n = 4. By Coulomb's law, the coulombic attraction is much stronger in Li\text{Li}, resulting in a significantly higher first ionization energy (I1≈520 kJ/molI_1 \approx 520\text{ kJ/mol} for Li\text{Li} vs. 419 kJ/mol419\text{ kJ/mol} for K\text{K}). Because more energy is needed to remove the valence electron from Li\text{Li}, its oxidation rate with water is substantially slower.

03

A student compares aluminum (Al\text{Al}, Group 13, Period 3) and sodium (Na\text{Na}, Group 1, Period 3). Using ZeffZ_{\text{eff}}, valence electron count, and ionization energy trends, determine which metal reacts more readily with dilute aqueous acid, and explain why.

Answer

Sodium (Na\text{Na}) reacts much more readily. Moving left to right from Group 1 to Group 13 across Period 3, ZeffZ_{\text{eff}} increases significantly, pulling valence electrons tighter and causing first ionization energy to be significantly higher for Al\text{Al} (578 kJ/mol578\text{ kJ/mol}) than for Na\text{Na} (496 kJ/mol496\text{ kJ/mol}). Additionally, aluminum must lose three valence electrons to complete oxidation compared to only one for sodium. The lower activation barrier for single-electron loss in Na\text{Na} makes it far more reactive.

Loading workspace…