Resources

A beaker contains an equilibrium mixture of 100.0 g100.0\text{ g} of liquid water and 25.0 g25.0\text{ g} of solid ice cubes at 0.0∘C0.0^\circ\text{C} and 1.00 atm1.00\text{ atm}. A student reasons that because the system contains only pure H2O\text{H}_2\text{O} molecules throughout, it must be classified as a homogeneous mixture. (a) Critique the student's reasoning and provide the correct classification of this ice-water system in terms of pure substance vs. mixture, and homogeneous vs. heterogeneous. (b) Calculate the minimum thermal energy in kilojoules (kJ\text{kJ}) that must be absorbed by the system at constant temperature to transform it into a completely uniform, single-phase liquid system (enthalpy of fusion ΔHfus=6.01 kJ/mol\Delta H_{\text{fus}} = 6.01\text{ kJ/mol}, molar mass of H2O=18.02 g/mol\text{H}_2\text{O} = 18.02\text{ g/mol}).

Answer and steps

Final answer

(a) The student's reasoning is incorrect; the system is a heterogeneous pure substance consisting of two distinct physical phases (solid and liquid); (b) 8.34 kJ8.34\text{ kJ}

Steps

Part (a): Classification of the System

  1. Critique of the Student's Reasoning:

    • The student confuses chemical composition with physical phase homogeneity.
    • A mixture requires two or more chemically distinct substances physically combined. Because the system contains exclusively water molecules (HX2O\ce{H2O}), it cannot be classified as a mixture at all; it is a pure substance.
    • Furthermore, a system is homogeneous only if its properties and physical state are completely uniform throughout on a macroscopic scale (i.e., a single phase). Because ice is a solid and water is a liquid, distinct phase boundaries exist between the ice cubes and the liquid water. Therefore, the system is heterogeneous.
  2. Correct Classification:

    • The ice-water system is a heterogeneous pure substance (a two-phase, one-component system consisting of solid ice and liquid water in equilibrium).

Part (b): Calculation of Required Thermal Energy

To convert the two-phase heterogeneous system into a completely uniform, single-phase liquid system at 0.0∘C0.0^\circ\text{C}, only the solid phase (the 25.0 g25.0\text{ g} of ice) needs to undergo a phase change (fusion) into liquid water. The 100.0 g100.0\text{ g} of liquid water is already in the liquid state and remains at 0.0∘C0.0^\circ\text{C}.

  1. Calculate the moles of ice (HX2O(s)\ce{H2O(s)}) to be melted: nice=miceM=25.0 g18.02 g/mol≈1.3873 moln_{\text{ice}} = \frac{m_{\text{ice}}}{M} = \frac{25.0\text{ g}}{18.02\text{ g/mol}} \approx 1.3873\text{ mol}
  2. Calculate the heat (qq) required for fusion: q=nice⋅ΔHfusq = n_{\text{ice}} \cdot \Delta H_{\text{fus}} q=1.3873 mol⋅6.01 kJ/mol≈8.338 kJq = 1.3873\text{ mol} \cdot 6.01\text{ kJ/mol} \approx 8.338\text{ kJ}
  3. Round to three significant figures: q=8.34 kJq = 8.34\text{ kJ}

(Common Pitfall: Do not include the 100.0 g100.0\text{ g} of water in the latent heat calculation. Latent heat of fusion only applies to the mass undergoing the phase transition, not the liquid already present.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student mistakenly includes the total mass of the system (125.0 g) instead of only the mass of ice that needs to melt (25.0 g) to achieve a single-phase liquid system, resulting in an calculated energy of 41.7 kJ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a) The student is incorrect because pure HX2O\ce{H2O} is a single chemical compound, so it is a pure substance, not a mixture. ⟹\Longrightarrow b) Since solid ice and liquid water coexist as two distinct phases, the system is heterogeneous. ⟹\Longrightarrow c) The correct classification is a heterogenous pure substance.

  2. Step 2

    Total mass of water system=100.0 g+25.0 g=125.0 g\text{Total mass of water system} = 100.0\text{ g} + 25.0\text{ g} = 125.0\text{ g}

    Correct

    mice=25.0 gm_{\text{ice}} = 25.0\text{ g}

    To convert the system into a single-phase liquid at 0.0∘C0.0^\circ\text{C}, only the solid ice must absorb latent heat to melt. The 100.0 g100.0\text{ g} of liquid water is already in the liquid phase at 0.0∘C0.0^\circ\text{C} and requires no phase change.

  3. Step 3

    n=125.0 g/18.02 g/mol=6.937 mol⟹q=6.937 mol×6.01 kJ/mol=41.7 kJn = 125.0\text{ g} / 18.02\text{ g/mol} = 6.937\text{ mol} \Longrightarrow q = 6.937\text{ mol} \times 6.01\text{ kJ/mol} = 41.7\text{ kJ}

    Correct

    nice=25.0 g18.02 g/mol=1.387 mol⟹q=1.387 mol×6.01 kJ/mol=8.34 kJn_{\text{ice}} = \frac{25.0\text{ g}}{18.02\text{ g/mol}} = 1.387\text{ mol} \Longrightarrow q = 1.387\text{ mol} \times 6.01\text{ kJ/mol} = 8.34\text{ kJ}

    Your calculation setup and unit conversions were mathematically correct, but your final energy value was inflated because it carried over the total mass from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished between a chemical mixture and a pure substance based on molecular composition.

You accurately identified that coexisting solid and liquid states make a system physically heterogeneous.

You correctly applied molar mass and enthalpy of fusion to determine the thermal energy required for a phase transition.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Superfluous component in phase change calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the total mass of the system with the mass of the specific phase that must undergo the phase transition. Latent heat (DeltaHtextfus\\Delta H_{\\text{fus}}) is only absorbed by the substance actually changing from solid to liquid, not by the portion that is already liquid.

REASONING PATH
Your ACEpath teacher’s suggested approach
Target the Changing Phase
  • When calculating latent heat (q=nΔHq = n \Delta H), only substitute the amount of substance actively undergoing the phase transition.

  • Identify which specific phase must change to reach the target state and exclude any mass already in that target state.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the mass of ice that needs to melt: mice=25.0 gm_{\text{ice}} = 25.0\text{ g}.

  2. Calculate the moles of ice: nice=25.0 g18.02 g/mol≈1.3873 moln_{\text{ice}} = \frac{25.0\text{ g}}{18.02\text{ g/mol}} \approx 1.3873\text{ mol}.

  3. Calculate the heat required for fusion: q=nice⋅ΔHfus=1.3873 mol×6.01 kJ/mol≈8.34 kJq = n_{\text{ice}} \cdot \Delta H_{\text{fus}} = 1.3873\text{ mol} \times 6.01\text{ kJ/mol} \approx 8.34\text{ kJ}.

Final answer

(a) The student's reasoning is incorrect; the system is a heterogeneous pure substance consisting of two distinct physical phases (solid and liquid); (b) 8.34 kJ8.34\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw or list the initial and final states of each phase present in a thermodynamic problem to ensure you only apply latent heat to the mass that actually changes phase.

  • Practice identifying whether a system is homogeneous or heterogeneous across different single-substance and multi-substance scenarios.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the physical boundary definition of a mixture with chemical composition, classifying the system as a heterogeneous mixture rather than a pure substance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The student is incorrect... because solid and liquid exist as separate phases, making it heterogeneous.

  2. Step 2

    Because ice and water are in different physical states, it should be treated as a mixture of two phases. The system is classified as a heterogeneous mixture.

    Correct

    Because the system consists exclusively of H2O\text{H}_2\text{O} molecules, it is chemically a pure substance, making the overall classification a heterogeneous pure substance.

    A mixture requires two or more chemically distinct substances. Even though two physical phases are present, all particles are chemically identical (H2O\text{H}_2\text{O}), so it is a heterogeneous pure substance, not a mixture.

  3. Step 3

    Only the ice needs to melt to become liquid water. ⟹ n(ice)=25.0 g/18.02 g/mol=1.387 moln(\text{ice}) = 25.0\text{ g} / 18.02\text{ g/mol} = 1.387\text{ mol} ⟹ q=1.387 mol×6.01 kJ/mol=8.34 kJq = 1.387\text{ mol} \times 6.01\text{ kJ/mol} = 8.34\text{ kJ}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the presence of multiple physical states (solid and liquid) makes the system heterogeneous.

You correctly determined that only the ice absorbs heat during the constant-temperature phase change.

You accurately calculated the moles of ice and the required enthalpy of fusion using correct significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Phase Boundary with Chemical Mixture

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated multiple coexisting physical phases as a 'mixture of phases' and concluded the system is a chemical mixture, overlooking that a mixture requires two or more chemically different substances.

REASONING PATH
Your ACEpath teacher’s suggested approach
Pure Substance vs. Mixture
  • A system containing only one type of chemical formula or compound is always a pure substance, regardless of how many physical states (phases) are present.

  • Check whether the system contains more than one chemically distinct component before labeling it a mixture.

Homogeneous vs. Heterogeneous
  • Homogeneity refers to macroscopic uniformity of physical state (single phase), while purity refers to chemical composition.

  • Separate your classification into two independent axes: chemical composition (pure substance vs. mixture) and physical uniformity (homogeneous vs. heterogeneous).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the chemical composition: The system contains only H2O\text{H}_2\text{O} molecules, so it has only one chemical component.

  2. Apply the definition of a pure substance: A single chemical component cannot be a mixture; it is a pure substance.

  3. Identify the physical state: Ice (solid) and water (liquid) form two distinct phases with macroscopic boundaries, so it is heterogeneous.

  4. Combine both classifications: The system is a heterogeneous pure substance.

Final answer

(a) The student's reasoning is incorrect; the system is a heterogeneous pure substance consisting of two distinct physical phases. (b) 8.34 kJ8.34\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the two-axis classification of matter: chemical composition (element/compound vs. mixture) versus physical phase state (homogeneous vs. heterogeneous).

  • Practice classifying multi-phase, single-component systems such as boiling water with steam or dry ice subliming in a closed flask.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the molar mass by the mass of ice instead of dividing to find the number of moles, leading to an incorrect energy requirement of 2710 kJ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The student is incorrect because a system consisting of only H2O\text{H}_2\text{O} molecules is a pure substance, not a mixture. Because there are two distinct phases present (solid and liquid), the system is heterogeneous. The correct classification is a heterogeneous pure substance.

  2. Step 2

    Mass of ice to melt=25.0 g  ⟹  n=25.0 g×18.02 g/mol=450.5 mol\text{Mass of ice to melt} = 25.0\text{ g} \implies n = 25.0\text{ g} \times 18.02\text{ g/mol} = 450.5\text{ mol}

    Correct

    n=mM=25.0 g18.02 g/mol≈1.387 moln = \frac{m}{M} = \frac{25.0\text{ g}}{18.02\text{ g/mol}} \approx 1.387\text{ mol}

    To convert mass to moles, you need to divide mass by molar mass (n=mMn = \frac{m}{M}). Multiplying grams by grams per mole yields units of g2/mol\text{g}^2/\text{mol} rather than moles.

  3. Step 3

    q=450.5 mol×6.01 kJ/mol=2710 kJq = 450.5\text{ mol} \times 6.01\text{ kJ/mol} = 2710\text{ kJ}

    Correct

    q=n⋅ΔHfus=1.387 mol×6.01 kJ/mol≈8.34 kJq = n \cdot \Delta H_{\text{fus}} = 1.387\text{ mol} \times 6.01\text{ kJ/mol} \approx 8.34\text{ kJ}

    Your formula setup for enthalpy of fusion was correct, but the calculated value was thrown off by the incorrect number of moles from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a sample of only H2O\text{H}_2\text{O} molecules is a pure substance rather than a mixture.

You recognized that having two separate physical states (solid and liquid) makes the system heterogeneous.

You correctly identified that only the 25.0 g25.0\text{ g} of ice needs to absorb heat of fusion to reach a single liquid phase.

You correctly applied the relationship q=n⋅ΔHfusq = n \cdot \Delta H_{\text{fus}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Molar Mass Conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the dimensional analysis factor for molar mass, multiplying by g/mol\text{g/mol} instead of dividing by it (multiplying by mol/g\text{mol/g}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis for Moles
  • n=mM=m×1 molM gn = \frac{m}{M} = m \times \frac{1\text{ mol}}{M\text{ g}}

  • Always write out units and cancel them explicitly: g×molg=mol\text{g} \times \frac{\text{mol}}{\text{g}} = \text{mol}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the moles of ice to be melted: n=25.0 g18.02 g/mol≈1.3873 moln = \frac{25.0\text{ g}}{18.02\text{ g/mol}} \approx 1.3873\text{ mol}.

  2. Calculate the required thermal energy: q=n⋅ΔHfus=1.3873 mol×6.01 kJ/mol≈8.34 kJq = n \cdot \Delta H_{\text{fus}} = 1.3873\text{ mol} \times 6.01\text{ kJ/mol} \approx 8.34\text{ kJ}.

Final answer

(a) The student is incorrect; the system is a heterogeneous pure substance. (b) 8.34 kJ8.34\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating moles from grams, write out the fraction with units so you can visually verify that grams cancel out.

  • Sanity-check mole magnitudes: 25 g25\text{ g} of water is roughly one tablespoon, which cannot physically equal over 400 mol400\text{ mol} of water.

Lock it in

Similar question

01

A flask contains 80.0 g80.0\text{ g} of liquid ethanol (CX2HX5OH\ce{C2H5OH}) and 20.0 g20.0\text{ g} of solid ethanol at its freezing point (−114.1∘C-114.1^\circ\text{C}). (a) Classify this system as a pure substance or mixture, and homogeneous or heterogeneous. (b) Calculate the energy in kJ\text{kJ} needed to completely melt the solid ethanol (ΔHfus=4.90 kJ/mol\Delta H_{\text{fus}} = 4.90\text{ kJ/mol}, molar mass of ethanol =46.07 g/mol= 46.07\text{ g/mol}).

Answer

(a) Heterogeneous pure substance (one chemical compound present in two distinct physical phases). (b) Only the 20.0 g20.0\text{ g} of solid ethanol melts: n=20.0 g46.07 g/mol=0.4341 moln = \frac{20.0\text{ g}}{46.07\text{ g/mol}} = 0.4341\text{ mol}. q=0.4341 mol×4.90 kJ/mol=2.13 kJq = 0.4341\text{ mol} \times 4.90\text{ kJ/mol} = 2.13\text{ kJ}.

02

A rigid container holds 18.0 g18.0\text{ g} of liquid water and 2.00 g2.00\text{ g} of water vapor at 100.0∘C100.0^\circ\text{C}. How much heat in kJ\text{kJ} must be removed at constant temperature to condense all the vapor into a completely uniform liquid system? (ΔHvap=40.7 kJ/mol\Delta H_{\text{vap}} = 40.7\text{ kJ/mol}, molar mass =18.02 g/mol= 18.02\text{ g/mol})

Answer

Only the 2.00 g2.00\text{ g} of vapor undergoes condensation: nvapor=2.00 g18.02 g/mol=0.1110 moln_{\text{vapor}} = \frac{2.00\text{ g}}{18.02\text{ g/mol}} = 0.1110\text{ mol}. Heat removed: q=0.1110 mol×40.7 kJ/mol=4.52 kJq = 0.1110\text{ mol} \times 40.7\text{ kJ/mol} = 4.52\text{ kJ}.

03

A mixture is prepared by dissolving 10.0 g10.0\text{ g} of solid NaCl\ce{NaCl} completely into 100.0 g100.0\text{ g} of liquid water at 25∘C25^\circ\text{C}. (a) Classify this resulting system in terms of pure substance vs. mixture, and homogeneous vs. heterogeneous. (b) If an additional 50.0 g50.0\text{ g} of NaCl\ce{NaCl} is added such that some solid salt settles undissolved at the bottom, how does the classification change?

Answer

(a) Homogeneous mixture (a solution with uniform composition and a single liquid phase throughout). (b) Heterogeneous mixture (two chemically distinct substances with distinct solid and liquid phase boundaries coexisting).

Loading workspace…