Resources
A pilot biorefinery burns bio-ethanol (, ) to produce process heat. A life-cycle greenhouse gas analysis indicates that upstream agricultural and distillation operations emit per megajoule () of thermal energy released. To qualify for a federal green-technology subsidy, the total life-cycle emission intensity of the technology cannot exceed a critical threshold boundary of . Given that the molar mass of ethanol is and complete combustion releases of () per mole of fuel, determine: (a) the direct combustion emission factor in , and (b) whether the technology meets the critical threshold boundary by calculating the numerical difference between the total life-cycle emission intensity and the regulatory limit.
Answer and steps
Final answer
(a) ; (b) , which is below the threshold boundary (Qualifies)
Steps
Write the balanced combustion equation
The complete combustion of one mole of ethanol () in oxygen produces carbon dioxide and water:
From stoichiometry, burning of ethanol produces:
Calculate the mass of produced per mole of fuel
Using the molar mass of carbon dioxide ():
Determine the direct combustion emission factor (Part a)
Combusting of ethanol releases of heat energy. Converting this energy to megajoules ():
The direct emission factor per megajoule of heat produced is:
Calculate total life-cycle greenhouse gas emissions (Part b)
Total life-cycle emissions account for both the upstream operations (cultivation, harvesting, processing, and distillation) and the direct combustion:
Evaluate against the regulatory threshold
The critical threshold limit for the federal green-technology subsidy is .
Calculating the margin relative to the regulatory limit:
Since the total emission intensity () is strictly less than the boundary threshold () by , the technology successfully qualifies for the subsidy.
Typical errors
01 The student forgets that complete combustion of 1 mol of ethanol yields 2 mol of CO2, using only 1 mol of CO2 in the direct emission calculation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used of instead of multiplying by the stoichiometric coefficient of , because complete combustion of of ethanol () produces of .
- Step 3Correct
Your life-cycle addition method and comparison logic were sound, but your numerical total and difference propagated the incorrect direct emission factor from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the combustion enthalpy from kilojoules to megajoules.
You properly combined the upstream emissions with the direct combustion emissions to find the total life-cycle emission intensity.
You correctly compared the total emissions to the regulatory threshold to make a compliance decision.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the molar mass of a single mole of () instead of accounting for the of released per mole of fuel.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating molar mass with stoichiometric mass in combustion calculations by skipping the mole ratio from the balanced chemical equation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Combustion Stoichiometry
, where is the stoichiometric coefficient per mole of combusted fuel.
Always write the balanced combustion equation or identify the carbon number of the fuel molecule before calculating the mass of released.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the stoichiometric mass of : .
Calculate the direct combustion emission factor: .
Calculate the total life-cycle emissions: .
Compute the difference from the regulatory threshold: .
(a) Direct combustion emission factor ; (b) Total life-cycle emissions , which is below the threshold boundary (meets the threshold boundary).
02 The student uses the molar mass of ethanol (46.07 g/mol) instead of the mass of CO2 produced (88.02 g/mol) when calculating the CO2 emission factor.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You placed the molar mass of the fuel (ethanol, ) in the numerator instead of the total mass of carbon dioxide emitted per mole of fuel ().
- Step 3Correct
Your addition of upstream and direct combustion emissions followed the correct formula, but the result was affected by the incorrect emission factor from Step 2.
- Step 4Correct
Your comparison method against the regulatory limit was logically sound, but your numerical difference was affected by the earlier value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the fuel combustion enthalpy from kilojoules to megajoules.
You added upstream emissions to direct combustion emissions using the correct life-cycle addition principle.
You correctly compared your calculated total against the critical threshold limit to judge compliance.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the mass of the reactant fuel consumed with the mass of gas emitted during combustion. An emission factor requires the mass of the specific greenhouse gas emitted in the numerator, which depends on reaction stoichiometry (), not the molar mass of the fuel molecule.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Target Species Mass
The numerator of an emission factor must be the mass of the emitted pollutant (), not the mass of fuel burned.
Multiply the moles of produced per mole of fuel by the molar mass of () before dividing by the energy released.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate mass of per mole of ethanol: .
Calculate direct emission factor: .
Calculate total life-cycle emissions: .
Calculate margin below threshold: .
(a) ; (b) Total life-cycle emissions are , which is below the threshold boundary (meets threshold).
03 The student omits the upstream emissions in part (b), comparing only the direct combustion emissions to the threshold boundary.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
A life-cycle assessment (LCA) encompasses both upstream emissions (farming, harvesting, and distillation) and direct combustion emissions. You omitted the upstream footprint.
- Step 3Correct
Your comparison followed your previous total emissions value, but because upstream emissions were omitted, your calculated margin of compliance () was significantly overstated instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the enthalpy of combustion from kilojoules to megajoules ().
You accurately used stoichiometry and molar mass to determine the mass of produced per mole of ethanol ().
You correctly computed the direct combustion emission factor as .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated direct stack combustion emissions as the complete life-cycle emission intensity, overlooking that life-cycle analysis (well-to-wheel / cradle-to-gate) requires summing all life-cycle stages—specifically adding the upstream supply-chain emissions to point-of-use combustion emissions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Life-Cycle Boundary Definition
Whenever a question asks for 'total life-cycle emissions' or 'cradle-to-grave intensity', inventory and add every stage mentioned (e.g., farming, refining, transport, and combustion) rather than taking only stack emissions.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b) Total emissions are , which is below the threshold (Qualifies)
Lock it in
How do you determine the mass of produced from burning of an organic fuel ?
Multiply the number of carbon atoms () by the molar mass of (): .
Similar question
Methanol () has a combustion enthalpy of and yields of () per mole of fuel. Calculate its direct combustion emission factor in .
Answer
Heat per mole . Mass of . Emission factor .
Bio-propane (, ) has upstream agricultural emissions of . Determine: (a) the direct combustion emission factor in , and (b) the total life-cycle emission intensity in .
Answer
(a) Complete combustion of of yields . Mass of . Energy . Direct emission factor . (b) Total life-cycle emissions .
A biorefinery produces bio-butanol (, ) with an upstream footprint of . A green standard sets a ceiling of . Does this fuel meet the standard, and by what margin?
Answer
Combustion yields per mole of butanol: . Energy released . Direct emissions . Total life-cycle emissions . Margin below the ceiling (Meets standard).