Resources

In a pharmaceutical preparation, acetaminophen (C8H9NO2\text{C}_8\text{H}_9\text{NO}_2, molar mass 151.16 g/mol151.16\text{ g/mol}) is synthesized from pp-aminophenol (C6H7NO\text{C}_6\text{H}_7\text{NO}, molar mass 109.13 g/mol109.13\text{ g/mol}) and excess acetic anhydride according to: C6H7NO+C4H6O3→C8H9NO2+C2H4O2\text{C}_6\text{H}_7\text{NO} + \text{C}_4\text{H}_6\text{O}_3 \rightarrow \text{C}_8\text{H}_9\text{NO}_2 + \text{C}_2\text{H}_4\text{O}_2. A production batch requires an actual isolated yield of exactly 250.0 g250.0\text{ g} of acetaminophen. Historical pilot-plant data indicates this reaction consistently operates at an 88.40%88.40\% yield. Calculate (a) the theoretical yield of acetaminophen required in grams and (b) the initial mass of pp-aminophenol in grams that must be charged into the reactor.

Answer and steps

Final answer

(a) Required theoretical yield = 282.8 g282.8\text{ g}; (b) Initial mass of pp-aminophenol = 204.2 g204.2\text{ g}

Steps

Part (a): Determine the Required Theoretical Yield of Acetaminophen

Percent yield represents the ratio of the actual amount of product obtained to the theoretical maximum amount that could be produced, expressed as a percentage:

Percent Yield=Actual YieldTheoretical Yield×100%\text{Percent Yield} = \frac{\text{Actual Yield}}{\text{Theoretical Yield}} \times 100\%

Rearranging the formula to solve for the required theoretical yield:

Theoretical Yield=Actual YieldPercent Yield×100%\text{Theoretical Yield} = \frac{\text{Actual Yield}}{\text{Percent Yield}} \times 100\%

Substitute the given values:

Theoretical Yield=250.0 g88.40%×100%=250.0 g0.8840≈282.805 g\text{Theoretical Yield} = \frac{250.0\text{ g}}{88.40\%} \times 100\% = \frac{250.0\text{ g}}{0.8840} \approx 282.805\text{ g}

Rounding to four significant figures gives: Theoretical Yield=282.8 g\text{Theoretical Yield} = 282.8\text{ g}


Part (b): Calculate the Initial Mass of pp-Aminophenol Required

From the balanced chemical equation:

CX6HX7NO+CX4HX6OX3→CX8HX9NOX2+CX2HX4OX2\ce{C6H7NO + C4H6O3 -> C8H9NO2 + C2H4O2}

The stoichiometric ratio between pp-aminophenol (CX6HX7NO\ce{C6H7NO}) and acetaminophen (CX8HX9NOX2\ce{C8H9NO2}) is 1:11 : 1.

  1. Find the moles of acetaminophen needed theoretically:

    Moles of acetaminophen=MassMolar Mass=282.805 g151.16 g/mol≈1.8709 mol\text{Moles of acetaminophen} = \frac{\text{Mass}}{\text{Molar Mass}} = \frac{282.805\text{ g}}{151.16\text{ g/mol}} \approx 1.8709\text{ mol}

  2. Use the molar ratio to determine the required moles of pp-aminophenol:

    Moles of p-aminophenol=1.8709 mol CX8HX9NOX2×1 mol CX6HX7NO1 mol CX8HX9NOX2=1.8709 mol\text{Moles of } p\text{-aminophenol} = 1.8709\text{ mol } \ce{C8H9NO2} \times \frac{1\text{ mol } \ce{C6H7NO}}{1\text{ mol } \ce{C8H9NO2}} = 1.8709\text{ mol}

  3. Convert moles of pp-aminophenol to mass in grams:

    Mass of p-aminophenol=1.8709 mol×109.13 g/mol≈204.17 g\text{Mass of } p\text{-aminophenol} = 1.8709\text{ mol} \times 109.13\text{ g/mol} \approx 204.17\text{ g}

Rounding to four significant figures gives: Mass of p-aminophenol=204.2 g\text{Mass of } p\text{-aminophenol} = 204.2\text{ g}

Common Pitfall: Do not calculate the reactant mass directly from the actual yield (250.0 g250.0\text{ g}) without accounting for the percent yield. Chemical stoichiometry always relates theoretical quantities under 100% conversion; reaction inefficiencies must be accounted for by scaling up to the required theoretical yield first.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies the actual yield by the percentage rather than dividing by it, incorrectly reducing the required theoretical yield to 221.0 g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Theoretical yield=250.0 g×0.8840  ⟹  Theoretical yield=221.0 g\text{Theoretical yield} = 250.0\text{ g} \times 0.8840 \implies \text{Theoretical yield} = 221.0\text{ g}

    Correct

    Theoretical yield=250.0 g0.8840=282.8 g\text{Theoretical yield} = \frac{250.0\text{ g}}{0.8840} = 282.8\text{ g}

    Because actual yield is always less than theoretical yield for a reaction with less than 100%100\% yield, the theoretical yield needed must be larger than the target actual yield (250.0 g250.0\text{ g}). You need to divide by the decimal yield: 250.0 g0.8840≈282.8 g\frac{250.0\text{ g}}{0.8840} \approx 282.8\text{ g}.

  2. Step 2

    Moles of acetaminophen=221.0 g151.16 g/mol=1.462 mol\text{Moles of acetaminophen} = \frac{221.0\text{ g}}{151.16\text{ g/mol}} = 1.462\text{ mol}

    Correct

    Moles of acetaminophen=282.805 g151.16 g/mol=1.871 mol\text{Moles of acetaminophen} = \frac{282.805\text{ g}}{151.16\text{ g/mol}} = 1.871\text{ mol}

    Your division of mass by molar mass was set up correctly, but the numerical result was affected by the incorrect theoretical yield from Step 1.

  3. Step 3

    Mass of p-aminophenol=1.462 mol×109.13 g/mol=159.5 g\text{Mass of } p\text{-aminophenol} = 1.462\text{ mol} \times 109.13\text{ g/mol} = 159.5\text{ g}

    Correct

    Mass of p-aminophenol=1.8709 mol×109.13 g/mol=204.2 g\text{Mass of } p\text{-aminophenol} = 1.8709\text{ mol} \times 109.13\text{ g/mol} = 204.2\text{ g}

    You correctly applied the 1:11:1 stoichiometric mole ratio and multiplied by the molar mass of pp-aminophenol, but your final answer inherited the error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used molar masses to convert between grams and moles.

You correctly recognized the 1:11:1 stoichiometric relationship between pp-aminophenol and acetaminophen.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Percent Yield Formula

You set Theoretical=Actual×Yield\text{Theoretical} = \text{Actual} \times \text{Yield} instead of dividing by the fractional yield.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated percent yield as a discount or reduction factor applied to the target quantity, rather than rearranging Percent Yield=Actual YieldTheoretical Yield×100%\text{Percent Yield} = \frac{\text{Actual Yield}}{\text{Theoretical Yield}} \times 100\% to isolate Theoretical Yield=Actual YieldPercent Yield\text{Theoretical Yield} = \frac{\text{Actual Yield}}{\text{Percent Yield}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sanity Check for Yield
  • For any reaction with less than 100%100\% yield, Theoretical Yield>Actual Yield\text{Theoretical Yield} > \text{Actual Yield}.

  • Always check whether your calculated theoretical mass is larger than the actual mass required. If it is smaller, you multiplied instead of dividing.

Formula Inversion
  • Percent Yield=ActualTheoretical×100%  ⟺  Theoretical=ActualPercent Yield/100%\text{Percent Yield} = \frac{\text{Actual}}{\text{Theoretical}} \times 100\% \iff \text{Theoretical} = \frac{\text{Actual}}{\text{Percent Yield} / 100\%}.

  • Rearrange the algebraic formula explicitly with units before substituting values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Theoretical yield=250.0 g0.8840=282.805 g\text{Theoretical yield} = \frac{250.0\text{ g}}{0.8840} = 282.805\text{ g}

  2. Moles of acetaminophen=282.805 g151.16 g/mol=1.8709 mol\text{Moles of acetaminophen} = \frac{282.805\text{ g}}{151.16\text{ g/mol}} = 1.8709\text{ mol}

  3. Mass of p-aminophenol=1.8709 mol×109.13 g/mol=204.2 g\text{Mass of } p\text{-aminophenol} = 1.8709\text{ mol} \times 109.13\text{ g/mol} = 204.2\text{ g}

Final answer

(a) 282.8 g282.8\text{ g}; (b) 204.2 g204.2\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating theoretical yield algebraically from the percent yield definition before plugging in numbers.

  • Perform a magnitude check after calculating: verify that you plan to input more reactant mass than would be needed at 100%100\% yield to account for reaction losses.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the required starting material based on 100% yield directly from the 250.0 g target, completely ignoring the 88.40% reaction yield.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Theoretical yield=250.0 g\text{Theoretical yield} = 250.0\text{ g}

    Correct

    Theoretical yield=Actual yieldPercent yield=250.0 g0.8840≈282.8 g\text{Theoretical yield} = \frac{\text{Actual yield}}{\text{Percent yield}} = \frac{250.0\text{ g}}{0.8840} \approx 282.8\text{ g}

    You set the theoretical yield equal to the actual target yield (250.0 g250.0\text{ g}), omitting the given 88.40%88.40\% percent yield. Because real chemical reactions produce less than the maximum possible amount, the theoretical yield needed to obtain 250.0 g250.0\text{ g} must be greater than 250.0 g250.0\text{ g}.

  2. Step 2

    Moles of acetaminophen=250.0 g/151.16 g/mol=1.6539 mol\text{Moles of acetaminophen} = 250.0\text{ g} / 151.16\text{ g/mol} = 1.6539\text{ mol}

    Correct

    Moles of acetaminophen=282.805 g151.16 g/mol≈1.8709 mol\text{Moles of acetaminophen} = \frac{282.805\text{ g}}{151.16\text{ g/mol}} \approx 1.8709\text{ mol}

    You correctly set up the conversion from mass to moles using the compound's molar mass, but your numerical result carries forward the uncorrected mass from Step 1.

  3. Step 3

    Mass of p-aminophenol=1.6539 mol×109.13 g/mol=180.5 g\text{Mass of } p\text{-aminophenol} = 1.6539\text{ mol} \times 109.13\text{ g/mol} = 180.5\text{ g}

    Correct

    Mass of p-aminophenol=1.8709 mol×109.13 g/mol≈204.2 g\text{Mass of } p\text{-aminophenol} = 1.8709\text{ mol} \times 109.13\text{ g/mol} \approx 204.2\text{ g}

    You correctly applied the 1:11:1 molar ratio and multiplied by the reactant's molar mass, but the final mass is too low because it stems from the initial unadjusted yield.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the molar mass of acetaminophen (151.16 g/mol151.16\text{ g/mol}) to convert mass into moles.

You correctly recognized and applied the 1:11:1 stoichiometric molar ratio between pp-aminophenol and acetaminophen.

You correctly multiplied moles by the molar mass of pp-aminophenol (109.13 g/mol109.13\text{ g/mol}) to find reactant mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating actual yield to theoretical yield

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the target actual yield (250.0 g250.0\text{ g}) as the theoretical yield (100%100\% conversion), overlooking that reaction stoichiometry must be based on the theoretical maximum scaled by the percent yield formula: Theoretical Yield=Actual YieldPercent Yield\text{Theoretical Yield} = \frac{\text{Actual Yield}}{\text{Percent Yield}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Actual vs. Theoretical Yield
  • Percent Yield=Actual YieldTheoretical Yield×100%\text{Percent Yield} = \frac{\text{Actual Yield}}{\text{Theoretical Yield}} \times 100\%

  • Whenever a target product mass is specified for a process with an efficiency <100%< 100\%, divide the target mass by the fractional yield to find the theoretical mass required before performing stoichiometry.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the required theoretical yield: Theoretical yield=250.0 g0.8840≈282.805 g\text{Theoretical yield} = \frac{250.0\text{ g}}{0.8840} \approx 282.805\text{ g}.

  2. Determine required moles of acetaminophen: n=282.805 g151.16 g/mol≈1.8709 moln = \frac{282.805\text{ g}}{151.16\text{ g/mol}} \approx 1.8709\text{ mol}.

  3. Apply the 1:11:1 mole ratio to find pp-aminophenol moles: n(CX6HX7NO)=1.8709 moln(\ce{C6H7NO}) = 1.8709\text{ mol}.

  4. Calculate the required mass of pp-aminophenol: m=1.8709 mol×109.13 g/mol≈204.2 gm = 1.8709\text{ mol} \times 109.13\text{ g/mol} \approx 204.2\text{ g}.

Final answer

(a) Required theoretical yield = 282.8 g282.8\text{ g}; (b) Initial mass of pp-aminophenol = 204.2 g204.2\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the relationship Theoretical Yield=Actual YieldFractional Yield\text{Theoretical Yield} = \frac{\text{Actual Yield}}{\text{Fractional Yield}} at the very start of production-scale stoichiometry problems.

  • Verify your intuition: if a reaction has less than 100%100\% yield, you must always start with more reactant than the stoichiometric ideal to achieve your target mass.

OverviewACEpath Teacher's Diagnosis

03 The student swaps the molar masses of acetaminophen and p-aminophenol when converting between mass and moles in the stoichiometric calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Theoretical yield=250.0 g/0.8840=282.8 g\text{Theoretical yield} = 250.0\text{ g} / 0.8840 = 282.8\text{ g}

  2. Step 2

    Moles=282.8 g/109.13 g/mol=2.591 mol\text{Moles} = 282.8\text{ g} / 109.13\text{ g/mol} = 2.591\text{ mol}

    Correct

    Moles of acetaminophen=282.8 g151.16 g/mol≈1.871 mol\text{Moles of acetaminophen} = \frac{282.8\text{ g}}{151.16\text{ g/mol}} \approx 1.871\text{ mol}

    You divided the theoretical mass of acetaminophen by 109.13 g/mol109.13\text{ g/mol} (the molar mass of pp-aminophenol) instead of 151.16 g/mol151.16\text{ g/mol} (the molar mass of acetaminophen).

  3. Step 3

    Mass of p-aminophenol=2.591 mol×151.16 g/mol=391.7 g\text{Mass of } p\text{-aminophenol} = 2.591\text{ mol} \times 151.16\text{ g/mol} = 391.7\text{ g}

    Correct

    Mass of p-aminophenol=1.8709 mol×109.13 g/mol≈204.2 g\text{Mass of } p\text{-aminophenol} = 1.8709\text{ mol} \times 109.13\text{ g/mol} \approx 204.2\text{ g}

    You multiplied by the molar mass of acetaminophen (151.16 g/mol151.16\text{ g/mol}) rather than the molar mass of pp-aminophenol (109.13 g/mol109.13\text{ g/mol}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the actual yield must be divided by the fractional percent yield to find the theoretical yield.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Swapped reactant and product molar masses

You accidentally interchanged the two given molar masses between the reactant and the product during dimensional analysis.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Losing track of chemical identities when labeling quantities during multi-step unit conversions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Label Chemical Formulas on Every Unit
  • Every stoichiometric quantity must include both the unit and the chemical identity: g X\text{g } \ce{X}, mol X\text{mol } \ce{X}, and g Xmol X\frac{\text{g } \ce{X}}{\text{mol } \ce{X}}.

  • Always write the substance formula after the unit (e.g., 151.16 g CX8HX9NOX2/mol151.16\text{ g } \ce{C8H9NO2}/\text{mol}) to ensure you match each mass with its own molar mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Moles of CX8HX9NOX2=282.805 g CX8HX9NOX2151.16 g/mol≈1.8709 mol\text{Moles of } \ce{C8H9NO2} = \frac{282.805\text{ g } \ce{C8H9NO2}}{151.16\text{ g/mol}} \approx 1.8709\text{ mol}

  2. Moles of CX6HX7NO=1.8709 mol CX8HX9NOX2×1 mol CX6HX7NO1 mol CX8HX9NOX2=1.8709 mol\text{Moles of } \ce{C6H7NO} = 1.8709\text{ mol } \ce{C8H9NO2} \times \frac{1\text{ mol } \ce{C6H7NO}}{1\text{ mol } \ce{C8H9NO2}} = 1.8709\text{ mol}

  3. Mass of CX6HX7NO=1.8709 mol×109.13 g/mol≈204.2 g\text{Mass of } \ce{C6H7NO} = 1.8709\text{ mol} \times 109.13\text{ g/mol} \approx 204.2\text{ g}

Final answer

(a) Required theoretical yield = 282.8 g282.8\text{ g}; (b) Initial mass of pp-aminophenol = 204.2 g204.2\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include the chemical identity next to every unit throughout your conversion string.

  • Perform a sanity check on molar masses: verify that each substance's mass is divided or multiplied strictly by its own molar mass.

Lock it in

Similar question

01

A chemist needs to isolate 120.0 g120.0\text{ g} of aspirin from a synthesis with a known percent yield of 75.0%75.0\%. What theoretical yield of aspirin must be planned?

Answer

Theoretical Yield=120.0 g0.750=160 g\text{Theoretical Yield} = \frac{120.0\text{ g}}{0.750} = 160\text{ g}.

02

A synthesis of ethyl acetate (molar mass 88.11 g/mol88.11\text{ g/mol}) from acetic acid and ethanol has an established yield of 82.0%82.0\%. How many grams of ethyl acetate must theoretically be produced to recover 41.0 g41.0\text{ g} of pure product, and how many moles of acetic acid (1:11:1 stoichiometric ratio) are required?

Answer

(1) Theoretical yield=41.0 g0.820=50.0 g\text{Theoretical yield} = \frac{41.0\text{ g}}{0.820} = 50.0\text{ g}. (2) Moles of acetic acid=50.0 g88.11 g/mol=0.567 mol\text{Moles of acetic acid} = \frac{50.0\text{ g}}{88.11\text{ g/mol}} = 0.567\text{ mol}.

03

Iron(III) oxide reacts with excess carbon monoxide: FeX2OX3+3 CO→2 Fe+3 COX2\ce{Fe2O3 + 3CO -> 2Fe + 3CO2}. An industrial plant needs to obtain 1.00 kg1.00\text{ kg} of pure iron metal (molar mass 55.85 g/mol55.85\text{ g/mol}). If the blast furnace operation operates at a 92.5%92.5\% yield, what initial mass of FeX2OX3\ce{Fe2O3} (molar mass 159.70 g/mol159.70\text{ g/mol}) must be charged into the furnace?

Answer

(1) Theoretical mass of Fe=1000 g0.925=1081.1 g\ce{Fe} = \frac{1000\text{ g}}{0.925} = 1081.1\text{ g}. (2) Moles of Fe=1081.1 g55.85 g/mol=19.357 mol\ce{Fe} = \frac{1081.1\text{ g}}{55.85\text{ g/mol}} = 19.357\text{ mol}. (3) Moles of FeX2OX3=19.357 mol2=9.6786 mol\ce{Fe2O3} = \frac{19.357\text{ mol}}{2} = 9.6786\text{ mol}. (4) Mass of FeX2OX3=9.6786 mol×159.70 g/mol=1546 g=1.55 kg\ce{Fe2O3} = 9.6786\text{ mol} \times 159.70\text{ g/mol} = 1546\text{ g} = 1.55\text{ kg}.

Loading workspace…