Resources

At 20∘C20^\circ\text{C}, the Henry's law constant for carbon dioxide gas dissolved in water is kH=0.0340 mol/(L⋅atm)k_{\text{H}} = 0.0340\text{ mol/(L}\cdot\text{atm)}. A carbonated soft drink is bottled under a headspace containing gaseous CO2\text{CO}_2 at a partial pressure of 3.50 atm3.50\text{ atm}. (a) Calculate the equilibrium concentration of dissolved CO2\text{CO}_2 in parts per million by mass (ppm\text{ppm}), assuming a solution density of 1.00 g/mL1.00\text{ g/mL} and a molar mass for CO2\text{CO}_2 of 44.01 g/mol44.01\text{ g/mol}. (b) If the bottle is opened to the atmosphere where the partial pressure of CO2\text{CO}_2 is 4.00×10−4 atm4.00 \times 10^{-4}\text{ atm}, calculate the new dissolved concentration in ppm\text{ppm}.

Answer and steps

Final answer

(a) 5.24×103 ppm5.24 \times 10^3\text{ ppm}; (b) 0.599 ppm0.599\text{ ppm}

Steps

Part (a): Concentration of Dissolved COX2\ce{CO2} under Bottling Pressure

Step 1: Determine the molar concentration using Henry's Law

According to Henry's Law, the solubility of a gas in a liquid at a given temperature is directly proportional to the partial pressure of the gas above the liquid:

C=kH⋅PCOX2C = k_{\text{H}} \cdot P_{\ce{CO2}}

Substitute the given values for the sealed bottle: C=(0.0340 mol/(L⋅atm))⋅(3.50 atm)=0.119 mol/LC = \left(0.0340\text{ mol}/(\text{L}\cdot\text{atm})\right) \cdot (3.50\text{ atm}) = 0.119\text{ mol/L}

Step 2: Convert molarity to mass of solute per liter of solution

Using the molar mass of COX2\ce{CO2} (M=44.01 g/molM = 44.01\text{ g/mol}), find the mass of dissolved carbon dioxide present in 1.00 L1.00\text{ L} of solution:

Mass of COX2=0.119 mol⋅44.01 g/mol=5.237 g\text{Mass of }\ce{CO2} = 0.119\text{ mol} \cdot 44.01\text{ g/mol} = 5.237\text{ g}

Step 3: Convert to parts per million (ppm)

The density of the solution is 1.00 g/mL1.00\text{ g/mL}, which means 1.00 L1.00\text{ L} (1000 mL1000\text{ mL}) of solution has a total mass of:

Mass of solution=1000 mL⋅1.00 g/mL=1000 g\text{Mass of solution} = 1000\text{ mL} \cdot 1.00\text{ g/mL} = 1000\text{ g}

By definition, parts per million by mass is:

ppm=mass of solutemass of solution⋅106\text{ppm} = \frac{\text{mass of solute}}{\text{mass of solution}} \cdot 10^6

ppm=5.237 g1000 g⋅106=5.237×103 ppm≈5.24×103 ppm\text{ppm} = \frac{5.237\text{ g}}{1000\text{ g}} \cdot 10^6 = 5.237 \times 10^3\text{ ppm} \approx 5.24 \times 10^3\text{ ppm}


Part (b): Concentration of Dissolved COX2\ce{CO2} after Opening to Atmosphere

Step 1: Calculate the new molar concentration

When the bottle is opened to the atmosphere, the partial pressure drops to PCOX2=4.00×10−4 atmP_{\ce{CO2}} = 4.00 \times 10^{-4}\text{ atm}:

Cnew=kH⋅PCOX2,newC_{\text{new}} = k_{\text{H}} \cdot P_{\ce{CO2, new}} Cnew=(0.0340 mol/(L⋅atm))⋅(4.00×10−4 atm)=1.36×10−5 mol/LC_{\text{new}} = \left(0.0340\text{ mol}/(\text{L}\cdot\text{atm})\right) \cdot (4.00 \times 10^{-4}\text{ atm}) = 1.36 \times 10^{-5}\text{ mol/L}

Step 2: Convert to mass of solute per liter

Mass of COX2=1.36×10−5 mol⋅44.01 g/mol=5.985×10−4 g\text{Mass of }\ce{CO2} = 1.36 \times 10^{-5}\text{ mol} \cdot 44.01\text{ g/mol} = 5.985 \times 10^{-4}\text{ g}

Step 3: Calculate the concentration in ppm

Using the same solution volume of 1.00 L1.00\text{ L} (1000 g1000\text{ g} of solution):

ppm=5.985×10−4 g1000 g⋅106=0.5985 ppm≈0.599 ppm\text{ppm} = \frac{5.985 \times 10^{-4}\text{ g}}{1000\text{ g}} \cdot 10^6 = 0.5985\text{ ppm} \approx 0.599\text{ ppm}

Pitfall Note: Remember that ppm\text{ppm} for aqueous solutions with a density of 1.00 g/mL1.00\text{ g/mL} is equivalent to mg of solute per liter of solution\text{mg of solute per liter of solution} (1 mg/L=1 ppm1\text{ mg/L} = 1\text{ ppm}). Directly converting grams per liter to milligrams per liter provides an immediate check: 5.237 g/L=5237 mg/L≈5.24×103 ppm5.237\text{ g/L} = 5237\text{ mg/L} \approx 5.24 \times 10^3\text{ ppm}, and 5.985×10−4 g/L=0.5985 mg/L≈0.599 ppm5.985 \times 10^{-4}\text{ g/L} = 0.5985\text{ mg/L} \approx 0.599\text{ ppm}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply molar concentration by the molar mass to get mass concentration, confusing molarity directly with g/L when calculating ppm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    C=kH×P=0.0340×3.50=0.119 mol/LC = k_{\text{H}} \times P = 0.0340 \times 3.50 = 0.119\text{ mol/L}

  2. Step 2

    Mass of 1 L solution=1.00 g/mL×1000 mL=1000 g\text{Mass of } 1\text{ L solution} = 1.00\text{ g/mL} \times 1000\text{ mL} = 1000\text{ g}

  3. Step 3

    ppm=(0.119/1000)×106=119 ppm\text{ppm} = (0.119 / 1000) \times 10^6 = 119\text{ ppm}

    Correct

    Mass of COX2=0.119 mol×44.01 g/mol=5.237 g  ⟹  ppm=5.237 g1000 g×106≈5.24×103 ppm\text{Mass of }\ce{CO2} = 0.119\text{ mol} \times 44.01\text{ g/mol} = 5.237\text{ g} \implies \text{ppm} = \frac{5.237\text{ g}}{1000\text{ g}} \times 10^6 \approx 5.24 \times 10^3\text{ ppm}

    Parts per million by mass requires the mass of the solute in grams, not the amount in moles. You need to multiply the 0.119 mol0.119\text{ mol} of COX2\ce{CO2} by its molar mass (44.01 g/mol44.01\text{ g/mol}) before dividing by the mass of the solution.

  4. Step 4

    C=0.0340×(4.00×10−4)=1.36×10−5 mol/LC = 0.0340 \times (4.00 \times 10^{-4}) = 1.36 \times 10^{-5}\text{ mol/L}

  5. Step 5

    ppm=(1.36×10−51000)×106=0.0136 ppm\text{ppm} = \left(\frac{1.36 \times 10^{-5}}{1000}\right) \times 10^6 = 0.0136\text{ ppm}

    Correct

    Mass of COX2=1.36×10−5 mol×44.01 g/mol=5.985×10−4 g  ⟹  ppm=5.985×10−4 g1000 g×106≈0.599 ppm\text{Mass of }\ce{CO2} = 1.36 \times 10^{-5}\text{ mol} \times 44.01\text{ g/mol} = 5.985 \times 10^{-4}\text{ g} \implies \text{ppm} = \frac{5.985 \times 10^{-4}\text{ g}}{1000\text{ g}} \times 10^6 \approx 0.599\text{ ppm}

    You repeated the same omission here by dividing moles rather than mass by the solution mass. Multiplying 1.36×10−5 mol1.36 \times 10^{-5}\text{ mol} by 44.01 g/mol44.01\text{ g/mol} gives 5.985×10−4 g5.985 \times 10^{-4}\text{ g}, which corresponds to 0.599 ppm0.599\text{ ppm}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied Henry's law (C=kHPC = k_{\text{H}} P) to calculate the dissolved molar concentration for both pressures.

You accurately determined that 1.00 L1.00\text{ L} of aqueous solution with density 1.00 g/mL1.00\text{ g/mL} has a mass of 1000 g1000\text{ g}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing unit conversion from moles to mass

You set up the ratio solutesolution×106\frac{\text{solute}}{\text{solution}} \times 10^6 correctly in form, but inserted molarity (0.119 mol/L0.119\text{ mol/L}) where mass concentration (5.237 g/L5.237\text{ g/L}) was needed.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated molar concentration as if it were already a mass concentration, overlooking that ppm by mass is strictly a ratio of masses (mass solute/mass solution\text{mass solute} / \text{mass solution}) and requires multiplying by molar mass (MM) first.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit check on ppm
  • Parts per million (ppm) by mass is defined as mass of solutemass of solution×106\frac{\text{mass of solute}}{\text{mass of solution}} \times 10^6, meaning both the numerator and the denominator must have mass units (such as grams).

  • Always verify that your solute quantity has units of grams (or milligrams) before computing ppm by mass.

Converting molarity to mass per volume
  • Mass of solute per liter=molarity (mol/L)×molar mass (g/mol)\text{Mass of solute per liter} = \text{molarity (mol/L)} \times \text{molar mass (g/mol)}.

  • Insert an explicit intermediate step to calculate m=n×Mm = n \times M whenever converting between molar concentration and mass fraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For part (a), find the mass of COX2\ce{CO2} in 1.00 L1.00\text{ L}: m=0.119 mol×44.01 g/mol=5.237 gm = 0.119\text{ mol} \times 44.01\text{ g/mol} = 5.237\text{ g}.

  2. Calculate ppm for part (a): ppm=5.237 g1000 g×106≈5.24×103 ppm\text{ppm} = \frac{5.237\text{ g}}{1000\text{ g}} \times 10^6 \approx 5.24 \times 10^3\text{ ppm}.

  3. For part (b), find the mass of COX2\ce{CO2} in 1.00 L1.00\text{ L}: m=(1.36×10−5 mol)×44.01 g/mol=5.985×10−4 gm = (1.36 \times 10^{-5}\text{ mol}) \times 44.01\text{ g/mol} = 5.985 \times 10^{-4}\text{ g}.

  4. Calculate ppm for part (b): ppm=5.985×10−4 g1000 g×106≈0.599 ppm\text{ppm} = \frac{5.985 \times 10^{-4}\text{ g}}{1000\text{ g}} \times 10^6 \approx 0.599\text{ ppm}.

Final answer

(a) 5.24×103 ppm5.24 \times 10^3\text{ ppm}; (b) 0.599 ppm0.599\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full unit chain (for example, molL×gmol=gL\frac{\text{mol}}{\text{L}} \times \frac{\text{g}}{\text{mol}} = \frac{\text{g}}{\text{L}}) rather than working with bare numbers.

  • Remember the convenient shortcut for dilute aqueous solutions with density 1.00 g/mL1.00\text{ g/mL}: 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L}.

OverviewACEpath Teacher's Diagnosis

02 The student uses a parts-per-million multiplier of 10^3 or treats ppm as parts per thousand instead of multiplying by 10^6.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    C=0.0340×3.50=0.119 mol/L  ⟹  Mass of CO2 per L=0.119×44.01=5.237 g/LC = 0.0340 \times 3.50 = 0.119\text{ mol/L} \implies \text{Mass of }\text{CO}_2\text{ per L} = 0.119 \times 44.01 = 5.237\text{ g/L}

  2. Step 2

    Mass of solution=1000 g  ⟹  ppm=(5.237/1000)×103=5.24 ppm\text{Mass of solution} = 1000\text{ g} \implies \text{ppm} = (5.237 / 1000) \times 10^3 = 5.24\text{ ppm}

    Correct

    ppm=5.237 g1000 g×106=5.24×103 ppm\text{ppm} = \frac{5.237\text{ g}}{1000\text{ g}} \times 10^6 = 5.24 \times 10^3\text{ ppm}

    You correctly determined the mass of 1.00 L1.00\text{ L} of solution as 1000 g1000\text{ g}, but you multiplied the mass fraction by 10310^3 instead of 10610^6. Parts per million requires multiplying by one million (10610^6).

  3. Step 3

    C=0.0340×(4.00×10−4)=1.36×10−5 mol/L  ⟹  Mass of CO2 per L=1.36×10−5×44.01=5.985×10−4 g/LC = 0.0340 \times (4.00 \times 10^{-4}) = 1.36 \times 10^{-5}\text{ mol/L} \implies \text{Mass of }\text{CO}_2\text{ per L} = 1.36 \times 10^{-5} \times 44.01 = 5.985 \times 10^{-4}\text{ g/L}

  4. Step 4

    ppm=(5.985×10−4/1000)×103=5.99×10−4 ppm\text{ppm} = (5.985 \times 10^{-4} / 1000) \times 10^3 = 5.99 \times 10^{-4}\text{ ppm}

    Correct

    ppm=5.985×10−4 g1000 g×106=0.599 ppm\text{ppm} = \frac{5.985 \times 10^{-4}\text{ g}}{1000\text{ g}} \times 10^6 = 0.599\text{ ppm}

    You repeated the same conversion error here by multiplying the mass ratio by 10310^3 rather than 10610^6.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Henry's law to find the dissolved molar concentration in both sealed and open conditions.

You accurately converted molarity into mass concentration using the molar mass of CO2\text{CO}_2.

You correctly applied the density of water to identify that 1 L1\text{ L} of solution has a mass of 1000 g1000\text{ g}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
parts-per-million multiplier error

You used 10310^3 instead of 10610^6 in the definition of parts per million.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused parts per million (ppm=fraction×106\text{ppm} = \text{fraction} \times 10^6) with parts per thousand (ppt=fraction×103\text{ppt} = \text{fraction} \times 10^3).

REASONING PATH
Your ACEpath teacher’s suggested approach
Parts per Million Definition
  • ppm=mass of solutemass of solution×106\text{ppm} = \frac{\text{mass of solute}}{\text{mass of solution}} \times 10^6

  • Check that your multiplier matches the prefix: 'percent' is 10210^2, 'parts per thousand' is 10310^3, and 'parts per million' is 10610^6.

Aqueous Density Shortcut
  • For dilute aqueous solutions with density 1.00 g/mL1.00\text{ g/mL}, 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L} because 1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g} and 1 L=103 g1\text{ L} = 10^3\text{ g} (10−3/103=10−610^{-3} / 10^3 = 10^{-6}).

  • Convert grams of solute directly to milligrams; for 1 L1\text{ L} of dilute water, milligrams equals ppm directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For part (a), substitute 5.237 g5.237\text{ g} into the ppm formula: ppm=5.237 g1000 g×106=5237 ppm=5.24×103 ppm\text{ppm} = \frac{5.237\text{ g}}{1000\text{ g}} \times 10^6 = 5237\text{ ppm} = 5.24 \times 10^3\text{ ppm}.

  2. Alternatively, use the aqueous unit shortcut: 5.237 g/L=5237 mg/L=5.24×103 ppm5.237\text{ g/L} = 5237\text{ mg/L} = 5.24 \times 10^3\text{ ppm}.

  3. For part (b), substitute 5.985×10−4 g5.985 \times 10^{-4}\text{ g} into the ppm formula: ppm=5.985×10−4 g1000 g×106=0.599 ppm\text{ppm} = \frac{5.985 \times 10^{-4}\text{ g}}{1000\text{ g}} \times 10^6 = 0.599\text{ ppm}.

  4. By unit shortcut: 5.985×10−4 g/L=0.5985 mg/L=0.599 ppm5.985 \times 10^{-4}\text{ g/L} = 0.5985\text{ mg/L} = 0.599\text{ ppm}.

Final answer

(a) 5.24×103 ppm5.24 \times 10^3\text{ ppm}; (b) 0.599 ppm0.599\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that parts per million always uses 10610^6 as its scale factor, just as percentage uses 10210^2.

  • Practice using the shortcut 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L} for dilute aqueous solutions to avoid powers-of-ten mistakes.

OverviewACEpath Teacher's Diagnosis

03 The student divides by the Henry's law constant instead of multiplying by it when calculating solubility from partial pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    C=PkH=3.500.0340=102.94 mol/LC = \frac{P}{k_{\text{H}}} = \frac{3.50}{0.0340} = 102.94\text{ mol/L}

    Correct

    C=kH⋅P=(0.0340 mol/(L⋅atm))⋅3.50 atm=0.119 mol/LC = k_{\text{H}} \cdot P = (0.0340\text{ mol}/(\text{L}\cdot\text{atm})) \cdot 3.50\text{ atm} = 0.119\text{ mol/L}

    You divided the partial pressure by kHk_{\text{H}} instead of multiplying. Check the units of the constant: mol/(L⋅atm)×atm=mol/L\text{mol}/(\text{L}\cdot\text{atm}) \times \text{atm} = \text{mol/L}, which shows that the two quantities must be multiplied.

  2. Step 2

    Mass of COX2 per L=102.94×44.01=4530.4 g/L  ⟹  ppm=(4530.41000)×106=4.53×106 ppm\text{Mass of }\ce{CO2}\text{ per L} = 102.94 \times 44.01 = 4530.4\text{ g/L} \implies \text{ppm} = \left(\frac{4530.4}{1000}\right) \times 10^6 = 4.53 \times 10^6\text{ ppm}

    Correct

    Mass of COX2 per L=0.119 mol×44.01 g/mol=5.24 g/L  ⟹  ppm=(5.241000)×106=5.24×103 ppm\text{Mass of }\ce{CO2}\text{ per L} = 0.119\text{ mol} \times 44.01\text{ g/mol} = 5.24\text{ g/L} \implies \text{ppm} = \left(\frac{5.24}{1000}\right) \times 10^6 = 5.24 \times 10^3\text{ ppm}

    Your conversion method from molarity to mass and then to ppm\text{ppm} was completely correct, but the numerical answer was affected by the incorrect concentration from Step 1.

  3. Step 3

    C=PkH=4.00×10−40.0340=0.01176 mol/LC = \frac{P}{k_{\text{H}}} = \frac{4.00 \times 10^{-4}}{0.0340} = 0.01176\text{ mol/L}

    Correct

    Cnew=kH⋅Pnew=(0.0340 mol/(L⋅atm))⋅(4.00×10−4 atm)=1.36×10−5 mol/LC_{\text{new}} = k_{\text{H}} \cdot P_{\text{new}} = (0.0340\text{ mol}/(\text{L}\cdot\text{atm})) \cdot (4.00 \times 10^{-4}\text{ atm}) = 1.36 \times 10^{-5}\text{ mol/L}

    You carried over the inverted Henry's law formula into part (b).

  4. Step 4

    Mass of COX2 per L=0.01176×44.01=0.5176 g/L  ⟹  ppm=(0.51761000)×106=518 ppm\text{Mass of }\ce{CO2}\text{ per L} = 0.01176 \times 44.01 = 0.5176\text{ g/L} \implies \text{ppm} = \left(\frac{0.5176}{1000}\right) \times 10^6 = 518\text{ ppm}

    Correct

    Mass of COX2 per L=(1.36×10−5 mol)×44.01 g/mol=5.99×10−4 g/L  ⟹  ppm=(5.99×10−41000)×106=0.599 ppm\text{Mass of }\ce{CO2}\text{ per L} = (1.36 \times 10^{-5}\text{ mol}) \times 44.01\text{ g/mol} = 5.99 \times 10^{-4}\text{ g/L} \implies \text{ppm} = \left(\frac{5.99 \times 10^{-4}}{1000}\right) \times 10^6 = 0.599\text{ ppm}

    Your unit conversion steps were mathematically sound, but the result was affected by the molarity calculated in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the molar mass of COX2\ce{CO2} to convert moles to grams.

You correctly calculated parts per million by mass using the solution mass of 1000 g1000\text{ g} per liter.

You showed neat, well-organized steps across both parts of the problem.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Henry's Law Formula

You divided PP by kHk_{\text{H}} instead of multiplying them together.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely misremembered the algebraic form of Henry's law without using dimensional analysis on kHk_{\text{H}} to verify whether pressure should be multiplied or divided.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis of Henry's Law Constant
  • The units of kHk_{\text{H}} tell you how to relate CC and PP. When kHk_{\text{H}} has units of mol/(L⋅atm)\text{mol}/(\text{L}\cdot\text{atm}), multiplying by PP (in atm\text{atm}) yields concentration in mol/L\text{mol/L}.

  • Always write out units explicitly when substituting into gas-law formulas: (mol/(L⋅atm))×atm=mol/L(\text{mol}/(\text{L}\cdot\text{atm})) \times \text{atm} = \text{mol/L}.

Physical Reality Check for Gas Solubility
  • Gases are only sparingly soluble in water under normal conditions; a concentration of over 100 mol/L100\text{ mol/L} (equivalent to >4.5 kg>4.5\text{ kg} of gas per liter of water) is physically impossible.

  • Pause and evaluate whether an aqueous molarity exceeds the molar density of water itself ( ≈55.5 mol/L\,\approx 55.5\text{ mol/L}). If it does, check for an inverted ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply Henry's constant by the partial pressure: C=kH⋅P=0.0340×3.50=0.119 mol/LC = k_{\text{H}} \cdot P = 0.0340 \times 3.50 = 0.119\text{ mol/L}.

  2. Convert molarity to mass per liter: 0.119 mol/L×44.01 g/mol=5.237 g/L0.119\text{ mol/L} \times 44.01\text{ g/mol} = 5.237\text{ g/L}.

  3. Calculate ppm\text{ppm} for part (a): 5.237 g1000 g×106=5.24×103 ppm\frac{5.237\text{ g}}{1000\text{ g}} \times 10^6 = 5.24 \times 10^3\text{ ppm}.

  4. Repeat for part (b): C=0.0340×(4.00×10−4)=1.36×10−5 mol/LC = 0.0340 \times (4.00 \times 10^{-4}) = 1.36 \times 10^{-5}\text{ mol/L}.

  5. Convert to ppm\text{ppm} for part (b): 1.36×10−5×44.01 g1000 g×106=0.599 ppm\frac{1.36 \times 10^{-5} \times 44.01\text{ g}}{1000\text{ g}} \times 10^6 = 0.599\text{ ppm}.

Final answer

(a) 5.24×103 ppm5.24 \times 10^3\text{ ppm}; (b) 0.599 ppm0.599\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the two common forms of Henry's law constants (concentration-over-pressure vs. pressure-over-concentration) and use dimensional analysis every time.

  • Practice checking whether your calculated gas solubility is realistic for a liquid solution.

Lock it in

Similar question

01

An aqueous solution has a dissolved oxygen (OX2\ce{O2}) concentration of 2.50×10−4 mol/L2.50 \times 10^{-4}\text{ mol/L}. Assuming a solution density of 1.00 g/mL1.00\text{ g/mL} and a molar mass for OX2\ce{O2} of 32.00 g/mol32.00\text{ g/mol}, calculate the concentration of dissolved OX2\ce{O2} in ppm\text{ppm}.

Answer

8.00 ppm8.00\text{ ppm}. Mass of OX2\ce{O2} in 1 L=(2.50×10−4 mol)×32.00 g/mol=8.00×10−3 g=8.00 mg1\text{ L} = (2.50 \times 10^{-4}\text{ mol}) \times 32.00\text{ g/mol} = 8.00 \times 10^{-3}\text{ g} = 8.00\text{ mg}. Since 1 L=1000 g1\text{ L} = 1000\text{ g}, ppm=8.00×10−3 g1000 g×106=8.00 ppm\text{ppm} = \frac{8.00 \times 10^{-3}\text{ g}}{1000\text{ g}} \times 10^6 = 8.00\text{ ppm}.

02

At 25∘C25^\circ\text{C}, the Henry's law constant for nitrogen gas (NX2\ce{N2}, M=28.02 g/molM = 28.02\text{ g/mol}) in water is kH=6.10×10−4 mol/(L⋅atm)k_{\text{H}} = 6.10 \times 10^{-4}\text{ mol/(L}\cdot\text{atm)}. Under an atmospheric nitrogen partial pressure of 0.780 atm0.780\text{ atm}, calculate the dissolved nitrogen concentration in ppm\text{ppm} in water (density =1.00 g/mL= 1.00\text{ g/mL}).

Answer

13.3 ppm13.3\text{ ppm}. First find molarity: C=(6.10×10−4 mol/(L⋅atm))×0.780 atm=4.758×10−4 mol/LC = (6.10 \times 10^{-4}\text{ mol/(L}\cdot\text{atm)}) \times 0.780\text{ atm} = 4.758 \times 10^{-4}\text{ mol/L}. Mass per liter: (4.758×10−4 mol)×28.02 g/mol=0.01333 g/L=13.33 mg/L(4.758 \times 10^{-4}\text{ mol}) \times 28.02\text{ g/mol} = 0.01333\text{ g/L} = 13.33\text{ mg/L}. In water with density 1.00 g/mL1.00\text{ g/mL}, 13.33 mg/L=13.3 ppm13.33\text{ mg/L} = 13.3\text{ ppm}.

03

A sample of industrial wastewater contains dissolved methane gas (CHX4\ce{CH4}, M=16.04 g/molM = 16.04\text{ g/mol}) at a concentration of 35.0 ppm35.0\text{ ppm}. The density of the wastewater is 1.02 g/mL1.02\text{ g/mL}. Calculate the molar concentration (molarity, mol/L\text{mol/L}) of CHX4\ce{CH4} in this wastewater.

Answer

2.22×10−3 mol/L2.22 \times 10^{-3}\text{ mol/L}. Mass of 1.00 L1.00\text{ L} of wastewater =1000 mL×1.02 g/mL=1020 g= 1000\text{ mL} \times 1.02\text{ g/mL} = 1020\text{ g}. Mass of CHX4\ce{CH4} in 1 L=1020 g×35.0106=0.0357 g1\text{ L} = 1020\text{ g} \times \frac{35.0}{10^6} = 0.0357\text{ g}. Moles of CHX4=0.0357 g16.04 g/mol=2.225×10−3 mol\ce{CH4} = \frac{0.0357\text{ g}}{16.04\text{ g/mol}} = 2.225 \times 10^{-3}\text{ mol}, so the molarity is 2.22×10−3 mol/L2.22 \times 10^{-3}\text{ mol/L}.

Loading workspace…