Resources
An industrial electroplating rinse effluent contains chromium(VI) ions at a concentration of . Environmental protection regulations dictate that the concentration of must be reduced below a critical threshold of prior to discharge into municipal sewers. A wastewater technician treats of this effluent by reducing to using sodium metabisulfite (, molar mass ) in acidic solution according to the stoichiometry: . Calculate: (a) the total initial mass of dissolved in grams, (b) the minimum theoretical mass of pure sodium metabisulfite in grams required to react completely with all chromium(VI) present, and (c) the minimum required percentage reduction efficiency of concentration to satisfy the discharge standard.
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Part (a): Total Initial Mass of Dissolved
- Calculate the mass from concentration and volume: The total mass of dissolved hexavalent chromium is the product of its mass concentration and the total wastewater volume:
- Convert milligrams to grams:
Part (b): Theoretical Mass of Sodium Metabisulfite ()
- Determine the moles of : Using the atomic molar mass of chromium ():
- Apply the stoichiometric ratio from the balanced chemical equation: The mole ratio is :
- Calculate the required mass of pure :
Part (c): Minimum Required Percentage Reduction Efficiency
-
Convert concentrations to matching units:
- Initial concentration:
- Maximum allowable discharge limit:
- Calculate the reduction efficiency:
Pitfall note: Failing to align concentration units (e.g., directly subtracting from without converting) is a frequent source of error in environmental wastewater calculations.
Typical errors
01 The student inverts the stoichiometric mole ratio as 4/3 instead of 3/4 when calculating the required moles of sodium metabisulfite.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You inverted the stoichiometric mole ratio. According to the balanced equation, of reacts with of , so you must multiply by , not .
- Step 4Correct
Your conversion method from moles to mass using the molar mass was logically sound, but the final value was affected by the inverted mole ratio in the previous step.
- Step 5
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total initial mass of dissolved hexavalent chromium in grams.
You aligned concentration units accurately before computing the required reduction efficiency.
You correctly applied the percentage reduction formula to reach .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up the conversion factor as instead of when finding moles of metabisulfite from moles of chromate.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the numerator and denominator in stoichiometric conversion factors by placing the known substance's coefficient on top instead of the target substance's coefficient.
REASONING PATH
Your ACEpath teacher’s suggested approach- Dimensional Analysis Unit-Check
Write out the full chemical formulas in your conversion fraction units (e.g., ) so the starting substance cancels out cleanly.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b) (or ); (c)
02 The student fails to convert mg/L to μg/L when computing the percentage reduction efficiency, directly subtracting 50.0 from 18.5.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You treated and as identical units. Because , the allowable threshold is (or the initial concentration is ).
WHAT YOU DID WELL
Compliments from Your TeacherYou calculated the total mass of hexavalent chromium and correctly converted milligrams to grams.
You identified and used the correct stoichiometric ratio between and .
You calculated the theoretical mass of sodium metabisulfite accurately from its molar mass.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou noticed the impossible negative percentage () from directly subtracting from , but resolved it by flipping the ratio instead of checking the concentration units.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou subtracted concentrations expressed in different metric prefixes ( and ) without converting them to a common unit before calculating relative removal efficiency.
REASONING PATH
Your ACEpath teacher’s suggested approach- Harmonize metric units before subtraction
Quantities added or subtracted must share the exact same units: .
Always convert both values to either or before taking their difference.
- Sanity-check efficiency bounds
A wastewater treatment process that reduces a pollutant from an initial level to a trace allowable limit must have a positive removal efficiency between and .
If your removal efficiency formula yields a negative value, inspect unit conversions rather than altering the formula.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the discharge limit from to : .
Calculate the concentration removed: .
Divide by the initial concentration and express as a percentage: .
(a) ; (b) (or using high-precision atomic weight); (c)
03 The student ignores the stoichiometric coefficients from the equation and assumes a 1:1 molar ratio between sodium metabisulfite and chromium(VI).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You set the moles of equal to the moles of , overlooking the stoichiometric coefficients from the equation: reacts with .
- Step 4Correct
Your molar mass multiplication was executed properly, but the resulting mass was overestimated due to the incorrect mole ratio in the preceding step.
- Step 5
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total initial mass of hexavalent chromium in grams.
You accurately converted concentration units to align with in the efficiency formula.
You correctly applied the formula for percentage reduction efficiency.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed an equimolar () reaction between the analyte and the titrant/reagent instead of multiplying by the ratio of coefficients given in the balanced chemical equation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Mole Ratios from Equations
In stoichiometry, always express the mole relationship as .
Before multiplying moles by molar mass, locate both species in the balanced equation and write down their explicit coefficient ratio.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the mole ratio from the balanced chemical equation: .
Calculate the required moles of sodium metabisulfite: .
Multiply by the molar mass of (): .
(a) ; (b) ; (c)
Lock it in
When converting from Substance A to Substance B using a balanced chemical equation, which coefficient belongs in the numerator of the mole ratio?
The coefficient of Substance B (the substance you are finding). Remember: .
Similar question
A wastewater stream contains of toxic permanganate ions () that must be reduced by sulfite ions () according to the balanced equation: . Calculate the minimum moles of sulfite required for complete reduction.
Answer
. Key step: .
To treat cyanide waste, hypochlorite oxidizes in alkaline solution: . If a holding tank contains of dissolved (), find the theoretical mass of pure () required.
Answer
. Key steps: ; ; .
An acidic rinse bath containing of ions () is neutralized and oxidized by potassium dichromate according to: . Calculate the mass in grams of pure () required to react completely with all .
Answer
(). Key steps: ; ; .