Resources
In an analytical chemistry laboratory, students monitor the rate of the persulfate-iodide clock reaction: . A fixed aliquot of sodium thiosulfate ( of ) and starch indicator are added to a reaction mixture having a total calibrated volume of . The thiosulfate rapidly consumes the generated iodine via the scavenger reaction . The instant all thiosulfate is depleted, free complexes with starch, turning the solution dark blue at exactly after mixing. (a) Calculate the concentration of produced by the primary reaction during this time interval. (b) Calculate the average rate of appearance of and the average rate of consumption of iodide ions () over this period.
Answer and steps
Final answer
(a) ; (b) Average rate of appearance of , Average rate of consumption of
Steps
Part (a): Concentration of Produced
- Relate iodine produced to thiosulfate consumed:
In this clock reaction, iodine () is generated continuously by the main reaction: The added thiosulfate ions () act as a scavenger, immediately reducing back to : According to the stoichiometry of the scavenger reaction, of reacts with of . Therefore, the total amount of produced up to the sudden color change equals half the moles of initially present: - Calculate the concentration:
Convert the solution volume to liters: Divide the moles of by the total volume:
Part (b): Average Rates of Appearance and Consumption
- Average rate of appearance of :
The average rate of appearance is the change in concentration of divided by the elapsed time (): - Average rate of consumption of :
From the stoichiometry of the primary reaction (), two moles of are consumed for every one mole of produced: Therefore, the rate of consumption of (expressed as a positive rate of loss, ) is twice the rate of formation of :
Common Pitfall: Do not confuse the scavenger reaction stoichiometry with the primary reaction stoichiometry. The scavenger reaction determines how much was formed from the known amount of , while the primary reaction stoichiometric coefficients determine the relative rate of consumption of compared to .
Typical errors
01 The student assumes a 1:1 mole ratio between iodine and thiosulfate in the scavenger reaction, doubling the calculated iodine concentration and subsequent rates.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
In the scavenger reaction , of reacts with of . You set their mole quantities equal to each other instead of dividing the moles of thiosulfate by .
- Step 2Correct
Your rate calculation formula is completely correct, but the numerical result is doubled due to the concentration error from Step 1.
- Step 3Correct
Your application of the primary reaction stoichiometry () is correct, but the final value inherits the error from the earlier steps.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted to .
You correctly applied the definition of molar concentration as moles divided by volume.
You correctly identified that the rate of appearance of is .
You correctly used the stoichiometric coefficient of from the primary reaction to relate the rate of consumption of to the rate of formation of .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed a 1:1 mole ratio between iodine and thiosulfate rather than checking the balanced scavenger equation , where each mole of consumes two moles of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Balancing the Scavenger Titration
For a reaction , the mole relationship at equivalence is .
Always write down the mole ratio expression before plugging in given quantities.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the correct moles of produced: .
Divide by the solution volume to find concentration: .
Calculate the average rate of appearance of : .
Multiply by to find the rate of consumption of : .
(a) ; (b) Average rate of appearance of , Average rate of consumption of
02 The student sets the rate of consumption of iodide equal to the rate of formation of iodine instead of multiplying by its stoichiometric coefficient of 2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
\text{Rate of }$$\ce{I2} = = 4.52 10^{-5}$\text{ M/s}$$
- Step 3
\text{Rate of }$$\ce{I-} = \text{Rate of }$$\ce{I2} = 4.52 10^{-5}
Correct- = 2 = 2 (4.52 10^{-5}\text{ M}$$\cdot$$\text{s}^{-1}) = 9.05 10^{-5}\text{ M}$$\cdot$$\text{s}^{-1}
In the primary reaction , two moles of are consumed for every one mole of produced, so the rate of consumption of must be twice the rate of formation of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the stoichiometry of the scavenger reaction to find the moles of formed.
You accurately converted the volume to liters and determined the molarity of .
You correctly calculated the average rate of appearance of .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assumed that all species in the primary reaction change concentration at the same rate, omitting the stoichiometric coefficient of for .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the general reaction rate with individual species rates, forgetting that relative rates of consumption and appearance are proportional to their stoichiometric coefficients: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Relative Rates and Stoichiometry
For , .
Express the rate of consumption of reactant as .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the rate relationship for : .
Multiply both sides by to solve for the rate of consumption: .
Substitute the rate of : .
(a) ; (b) Rate of , Rate of
03 The student divides the rate of appearance of iodine by 2 instead of multiplying by 2 when finding the rate of consumption of iodide.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
From the balanced reaction , two moles of disappear for every one mole of formed. Therefore, the rate of consumption of must be twice as fast as the formation of , so you need to multiply by 2 rather than divide by 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou used the 2:1 stoichiometry of the thiosulfate scavenger reaction correctly to find the moles of iodine.
You converted milliliters to liters properly and found the correct concentration of iodine.
You determined the rate of appearance of iodine accurately using the elapsed time.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeDividing the appearance rate by 2 instead of multiplying by 2 when relating a reactant with coefficient 2 to a product with coefficient 1.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the definition of the unique general reaction rate, , with the species rate of consumption , which requires isolating the species rate by multiplying by the coefficient.
REASONING PATH
Your ACEpath teacher’s suggested approach- Relate species rate to general reaction rate
For , the overall rate is .
Always isolate the desired species rate algebraically: .
- Physical reality check
A reactant with a larger stoichiometric coefficient must disappear faster than a product with a smaller coefficient appears.
Check that the rate of consumption of (coefficient 2) is larger than the appearance rate of (coefficient 1).
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the primary reaction rate equality: .
Solve for the consumption rate of : .
Substitute the value: .
(a) ; (b) Rate of appearance of , Rate of consumption of
Lock it in
In an iodine clock reaction, what is the stoichiometric relationship between consumed and added?
. From , two moles of thiosulfate are required to reduce one mole of iodine.
Similar question
A student carries out the persulfate-iodide clock reaction in a total volume of . The mixture contains of . The blue starch-iodine complex appears at . Calculate: (a) the concentration of produced up to the color change, and (b) the average rate of appearance of .
Answer
(a) . . (b) .
In a persulfate-iodide reaction, , the rate of consumption of is found to be . Determine the rate of consumption of and the rate of appearance of .
Answer
From stoichiometry, . Thus, the rate of consumption of , and the rate of appearance of .
In a Landolt iodate-bisulfite clock reaction, iodate is reduced to iodide: . Once is fully consumed, excess reacts with to generate , which triggers the starch indicator. If of in a beaker is consumed in , calculate the average rate of consumption of during this time interval.
Answer
Moles of consumed . . Rate of consumption of .