Resources

An analytical chemistry student standardizes an unknown aqueous solution of a diprotic acid, H2X\text{H}_2X, by titrating a 25.00 mL25.00\text{ mL} aliquot with standardized 0.1200 M NaOH0.1200\text{ M}\,\text{NaOH}. The equivalence point is detected after adding exactly 31.25 mL31.25\text{ mL} of the NaOH\text{NaOH} titrant. (a) Calculate the molar concentration of H2X\text{H}_2X in the original sample. (b) If the conjugate base X2−X^{2-} is a monoatomic anion of an element XX belonging to Period 44, identify the element XX, its IUPAC group number, and the number of valence electrons in the neutral atom of XX.

Answer and steps

Final answer

(a) 0.07500 M H2X0.07500\text{ M}\,\text{H}_2X; (b) Element XX is Selenium (Se\text{Se}), Group 1616, with 66 valence electrons.

Steps

Part (a): Determine the Molar Concentration of HX2X\ce{H2X}

  1. Write the balanced chemical equation: A diprotic acid (HX2X\ce{H2X}) donates two protons (HX+\ce{H+}) per formula unit, reacting with sodium hydroxide in a 1:21:2 stoichiometric ratio: HX2X(aq)+2 NaOH(aq)→NaX2X(aq)+2 HX2O(l)\ce{H2X (aq) + 2 NaOH (aq) -> Na2X (aq) + 2 H2O (l)}
  2. Calculate the moles of NaOH\ce{NaOH} consumed: Moles of NaOH=M×V=(0.1200 mol/L)×(0.03125 L)=3.750×10−3 mol\text{Moles of } \ce{NaOH} = M \times V = (0.1200\text{ mol/L}) \times (0.03125\text{ L}) = 3.750 \times 10^{-3}\text{ mol}
  3. Determine the moles of HX2X\ce{H2X} titrated: From the 1:21:2 mole ratio: Moles of HX2X=3.750×10−3 mol NaOH2=1.875×10−3 mol HX2X\text{Moles of } \ce{H2X} = \frac{3.750 \times 10^{-3}\text{ mol }\ce{NaOH}}{2} = 1.875 \times 10^{-3}\text{ mol }\ce{H2X}
  4. Calculate the molarity of the acid solution: Molarity of HX2X=moles of HX2Xvolume in liters=1.875×10−3 mol0.02500 L=0.07500 M\text{Molarity of } \ce{H2X} = \frac{\text{moles of }\ce{H2X}}{\text{volume in liters}} = \frac{1.875 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.07500\text{ M}

Common Pitfall: Forgetting the stoichiometric factor of 22 for a diprotic acid will result in calculating twice the actual concentration.


Part (b): Identify Element XX and Its Periodic Properties

  1. Relate ion charge to periodic group: The conjugate base forms a stable monoatomic anion with a 2−2- charge (X2−X^{2-}). A main-group element forms a 2−2- ion by gaining two electrons to complete an octet (ns2np6ns^2 np^6). Therefore, a neutral atom of element XX has: Valence electrons=8−2=6\text{Valence electrons} = 8 - 2 = 6
  2. Determine the IUPAC group number: Main-group elements with 66 valence electrons belong to Group 16 (the chalcogens).
  3. Locate the element in Period 4: In Period 4, the Group 16 element directly below sulfur (S\ce{S}) is Selenium (Se\ce{Se}).

    • Electron configuration: [Ar] 3d10 4s2 4p4[\ce{Ar}]\,3d^{10}\,4s^2\,4p^4
    • Valence electrons in outer shell (n=4n=4): 2+4=62 + 4 = 6

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the 1:2 stoichiometric ratio between diprotic acid H₂X and NaOH, assuming a 1:1 equimolar equivalence.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    moles NaOH=0.1200 M×0.03125 L=0.003750 mol\text{moles NaOH} = 0.1200\text{ M} \times 0.03125\text{ L} = 0.003750\text{ mol}

  2. Step 2

    moles H2X=moles NaOH=0.003750 mol\text{moles }\text{H}_2X = \text{moles NaOH} = 0.003750\text{ mol}

    Correct

    moles H2X=12×nNaOH=0.003750 mol2=0.001875 mol\text{moles }\text{H}_2X = \frac{1}{2} \times n_{\text{NaOH}} = \frac{0.003750\text{ mol}}{2} = 0.001875\text{ mol}

    Because H2X\text{H}_2X is a diprotic acid, each mole of acid donates 2 moles2\text{ moles} of H+\text{H}^+ ions, reacting with NaOH\text{NaOH} in a 1:21:2 stoichiometric ratio: H2X+2NaOH→Na2X+2H2O\text{H}_2X + 2\text{NaOH} \rightarrow \text{Na}_2X + 2\text{H}_2\text{O}.

  3. Step 3

    M=0.003750 mol0.02500 L=0.1500 MM = \frac{0.003750\text{ mol}}{0.02500\text{ L}} = 0.1500\text{ M}

    Correct

    [H2X]=0.001875 mol0.02500 L=0.07500 M[\text{H}_2X] = \frac{0.001875\text{ mol}}{0.02500\text{ L}} = 0.07500\text{ M}

    Your division by the aliquot volume was mathematically correct, but the result is doubled due to the stoichiometric error in the previous step.

  4. Step 4

    X2− has a charge of −2, so neutral X has 6 valence electrons. Group 16 element in Period 4 is Selenium (Se). Element: Se, Group: 16, Valence electrons: 6X^{2-}\text{ has a charge of }-2\text{, so neutral }X\text{ has }6\text{ valence electrons. Group }16\text{ element in Period }4\text{ is Selenium (Se). Element: Se, Group: }16\text{, Valence electrons: }6

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of NaOH\text{NaOH} consumed from its volume and molarity.

You correctly determined the number of valence electrons, IUPAC group number, and element identity in Part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Ratio Omission

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the diprotic acid as monoprotic, setting nacid=nbasen_{\text{acid}} = n_{\text{base}} rather than applying the 1:21:2 mole ratio from the balanced neutralization equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Acid Proticity
  • For a polyprotic acid HnA\text{H}_nA, each mole of acid requires nn moles of strong base OH−\text{OH}^- for complete neutralization: HnA+nOH−→An−+nH2O\text{H}_nA + n\text{OH}^- \rightarrow A^{n-} + n\text{H}_2\text{O}.

  • Always write the balanced net ionic equation before calculating moles of unknown analyte.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the balanced reaction: H2X+2NaOH→Na2X+2H2O\text{H}_2X + 2\text{NaOH} \rightarrow \text{Na}_2X + 2\text{H}_2\text{O}.

  2. Calculate moles of acid: nH2X=nNaOH2=3.750×10−3 mol2=1.875×10−3 moln_{\text{H}_2X} = \frac{n_{\text{NaOH}}}{2} = \frac{3.750 \times 10^{-3}\text{ mol}}{2} = 1.875 \times 10^{-3}\text{ mol}.

  3. Calculate molarity: [H2X]=1.875×10−3 mol0.02500 L=0.07500 M[\text{H}_2X] = \frac{1.875 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.07500\text{ M}.

Final answer

(a) 0.07500 M H2X0.07500\text{ M}\text{ H}_2X; (b) Element Se\text{Se}, Group 1616, 66 valence electrons

NEXT STEPS
Final Takeaways from Your Teacher
  • Review titration stoichiometry for diprotic and triprotic acids like H2SO4\text{H}_2\text{SO}_4 and H3PO4\text{H}_3\text{PO}_4.

  • Practice checking whether an acid formula contains ionizable hydrogen subscripts before assuming equimolar equivalence.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the group number with the number of valence electrons, reporting Group 6 instead of IUPAC Group 16.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    moles NaOH=0.1200 M×0.03125 L=0.003750 mol  ⟹  moles H2X=0.003750 mol/2=0.001875 mol  ⟹  M=0.001875 mol0.02500 L=0.07500 M\text{moles NaOH} = 0.1200\text{ M} \times 0.03125\text{ L} = 0.003750\text{ mol} \implies \text{moles }\text{H}_2X = 0.003750\text{ mol} / 2 = 0.001875\text{ mol} \implies M = \frac{0.001875\text{ mol}}{0.02500\text{ L}} = 0.07500\text{ M}

  2. Step 2

    X2− has 6 valence electrons in neutral form.  ⟹  Period 4 element with 6 valence electrons is Se.X^{2-}\text{ has } 6\text{ valence electrons in neutral form.} \implies \text{Period 4 element with } 6\text{ valence electrons is Se.}

  3. Step 3

    Group: \text{Group: } 6   ⟹  \implies Element: Se, Group: 6, Valence electrons: 6\text{Element: Se, Group: 6, Valence electrons: 6}

    Correct

    IUPAC Group: 16\text{IUPAC Group: } 16

    You wrote Group 66 instead of Group 1616. In the standard IUPAC 1–18 numbering system, the main-group p-block chalcogens (with 66 valence electrons) are in Group 1616. Group 66 contains transition metals like chromium (Cr\text{Cr}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the 1:21:2 stoichiometric ratio to find the molarity of the diprotic acid.

You deduced that an element forming an X2−X^{2-} ion possesses 66 valence electrons in its neutral state.

You correctly identified the Period 4 chalcogen as selenium (Se\text{Se}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Periodic Table Group Numbering Confusion

You crossed out '6A' and wrote '6', accidentally equating the number of valence electrons directly with the IUPAC group number.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing older CAS/American group notation (Group 6A) or valence electron count with standard IUPAC 1–18 group numbering, where p-block groups are found by adding 10 (valence electrons + 10 = Group 16).

REASONING PATH
Your ACEpath teacher’s suggested approach
IUPAC Group Numbering for p-Block Elements
  • For main-group elements in the p-block (Groups 13–18), IUPAC Group Number = Valence Electrons + 10.

  • Add 1010 to the valence electron count of p-block elements to account for the intervening transition metal d-block (Groups 3–12).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Selenium (Se\text{Se}) has the electron configuration [Ar] 3d10 4s2 4p4[\text{Ar}]\,3d^{10}\,4s^2\,4p^4, giving it 66 valence electrons (4s2 4p44s^2\,4p^4).

  2. Main-group elements with an ns2np4ns^2 np^4 valence configuration belong to IUPAC Group 10+6=1610 + 6 = 16.

Final answer

Element: Se\text{Se}, Group: 1616, Valence electrons: 66

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between the IUPAC 1–18 numbering system and the older A/B designation.

  • Remember that Group 6 is a transition metal column (Cr, Mo, W), whereas Group 16 is the oxygen family (O, S, Se, Te, Po).

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the monoatomic anion with a -2 charge as having 2 valence electrons instead of 6, mistakenly identifying the alkaline earth metal in Period 4 (calcium).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    moles NaOH=0.1200 M×0.03125 L=0.003750 mol\text{moles NaOH} = 0.1200\text{ M} \times 0.03125\text{ L} = 0.003750\text{ mol}

  2. Step 2

    moles H2X=0.003750 mol2=0.001875 mol\text{moles }\text{H}_2X = \frac{0.003750\text{ mol}}{2} = 0.001875\text{ mol}

  3. Step 3

    M=0.001875 mol0.02500 L=0.07500 MM = \frac{0.001875\text{ mol}}{0.02500\text{ L}} = 0.07500\text{ M}

  4. Step 4

    Charge is 2, so neutral atom has 2 valence electrons.\text{Charge is } 2\text{, so neutral atom has } 2\text{ valence electrons.}

    Correct

    For a monoatomic anion X2−, the neutral atom gained 2 electrons to complete an octet: valence electrons=8−2=6.\text{For a monoatomic anion } X^{2-}\text{, the neutral atom gained } 2\text{ electrons to complete an octet: } \text{valence electrons} = 8 - 2 = 6.

    Anions form when nonmetals gain electrons to reach an octet. A charge of 2−2- means the neutral atom gained 22 electrons, so it originally had 8−2=68 - 2 = 6 valence electrons, not 22.

  5. Step 5

    Period 4 element in Group 2 is Calcium (Ca).  ⟹  Element: Ca, Group: 2, Valence electrons: 2\text{Period 4 element in Group 2 is Calcium (Ca).} \implies \text{Element: Ca, Group: 2, Valence electrons: 2}

    Correct

    A Period 4 element in Group 16 with 6 valence electrons is Selenium (Se).\text{A Period 4 element in Group 16 with 6 valence electrons is Selenium (Se).}

    Because of the misidentified valence count, you selected Group 2 (calcium) instead of Group 16 (selenium).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of titrant and recognized that a diprotic acid requires a 1:2 stoichiometric factor.

You calculated the correct molar concentration of the acid solution with the right units and precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Anion charge vs. valence electron confusion

You treated an anion of charge 2−2- as if it were a cation losing 22 valence electrons.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sign and origin of ion charges: main-group monoatomic anions gain electrons to complete a stable octet (ns2np6ns^2 np^6), meaning valence electrons=8−∣anion charge∣\text{valence electrons} = 8 - |\text{anion charge}|, whereas main-group cations lose all valence electrons, leaving ∣cation charge∣=valence electrons|\text{cation charge}| = \text{valence electrons}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Ion Type and Electron Flow
  • Anions (Xn−X^{n-}) gain nn electrons to reach 88 valence electrons; cations (Mn+M^{n+}) lose nn valence electrons.

  • When you see a negative charge X2−X^{2-}, compute valence electrons as 8−2=68 - 2 = 6, placing the nonmetal in Group 16.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that X2−X^{2-} is an anion formed by gaining 22 electrons to achieve a full valence shell of 88 electrons: valence electrons=8−2=6\text{valence electrons} = 8 - 2 = 6.

  2. Main-group elements with 66 valence electrons correspond to IUPAC Group 16.

  3. Locate Group 16 in Period 4 of the periodic table, which is Selenium (Se\text{Se}).

Final answer

(a) 0.07500 M H2X0.07500\text{ M}\,\text{H}_2X; (b) Element XX is Selenium (Se\text{Se}), Group 16, with 66 valence electrons.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing how cations and anions relate to valence electron count using the octet rule.

  • Map typical monoatomic ion charges (−3,−2,−1-3, -2, -1 vs. +1,+2,+3+1, +2, +3) directly to their IUPAC periodic groups (15, 16, 17 vs. 1, 2, 13).

Lock it in

Similar question

01

A 20.00 mL20.00\text{ mL} sample of a triprotic acid, H3A\text{H}_3A, is titrated to its equivalence point with 18.00 mL18.00\text{ mL} of 0.1500 M KOH0.1500\text{ M}\text{ KOH}. What is the molar concentration of H3A\text{H}_3A?

Answer

0.04500 M0.04500\text{ M}. Key steps: nKOH=(0.01800 L)(0.1500 M)=2.700×10−3 moln_{\text{KOH}} = (0.01800\text{ L})(0.1500\text{ M}) = 2.700 \times 10^{-3}\text{ mol}. Stoichiometry is 1 H3A:3 KOH1\text{ H}_3A : 3\text{ KOH}, so nH3A=2.700×10−3 mol3=9.000×10−4 moln_{\text{H}_3A} = \frac{2.700 \times 10^{-3}\text{ mol}}{3} = 9.000 \times 10^{-4}\text{ mol}. Concentration M=9.000×10−4 mol0.02000 L=0.04500 MM = \frac{9.000 \times 10^{-4}\text{ mol}}{0.02000\text{ L}} = 0.04500\text{ M}.

02

A 0.1800 g0.1800\text{ g} sample of an unknown solid diprotic acid H2A\text{H}_2A is dissolved in water and titrated with 0.1000 M NaOH0.1000\text{ M}\text{ NaOH}. Exactly 30.00 mL30.00\text{ mL} of NaOH\text{NaOH} is required to reach the equivalence point. What is the molar mass of H2A\text{H}_2A?

Answer

120.0 g/mol120.0\text{ g/mol}. Key steps: nNaOH=(0.03000 L)(0.1000 M)=3.000×10−3 moln_{\text{NaOH}} = (0.03000\text{ L})(0.1000\text{ M}) = 3.000 \times 10^{-3}\text{ mol}. Because the acid is diprotic, nH2A=3.000×10−3 mol2=1.500×10−3 moln_{\text{H}_2A} = \frac{3.000 \times 10^{-3}\text{ mol}}{2} = 1.500 \times 10^{-3}\text{ mol}. Molar mass =0.1800 g1.500×10−3 mol=120.0 g/mol= \frac{0.1800\text{ g}}{1.500 \times 10^{-3}\text{ mol}} = 120.0\text{ g/mol}.

03

A 25.00 mL25.00\text{ mL} solution of an unknown diprotic acid H2Z\text{H}_2Z requires 40.00 mL40.00\text{ mL} of 0.1250 M NaOH0.1250\text{ M}\text{ NaOH} for complete neutralization. (a) Determine [H2Z][\text{H}_2Z]. (b) If Z2−Z^{2-} is an isoelectronic monoatomic anion with Argon, identify element ZZ and its IUPAC group.

Answer

(a) 0.1000 M0.1000\text{ M}; (b) Sulfur (S\text{S}), Group 1616. Key steps: nNaOH=(0.04000 L)(0.1250 M)=5.000×10−3 moln_{\text{NaOH}} = (0.04000\text{ L})(0.1250\text{ M}) = 5.000 \times 10^{-3}\text{ mol}. Moles of H2Z=5.000×10−3 mol2=2.500×10−3 mol\text{H}_2Z = \frac{5.000 \times 10^{-3}\text{ mol}}{2} = 2.500 \times 10^{-3}\text{ mol}. [H2Z]=2.500×10−3 mol0.02500 L=0.1000 M[\text{H}_2Z] = \frac{2.500 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.1000\text{ M}. An anion Z2−Z^{2-} with 1818 electrons (like Ar\text{Ar}) has 1616 protons, identifying element 1616 as Sulfur in Group 1616.

Loading workspace…