Resources

A 30.0 mL30.0\text{ mL} aliquot of 0.100 M0.100\text{ M} hypochlorous acid (HClO\text{HClO}, Ka=3.00×10−8K_a = 3.00 \times 10^{-8}) is titrated with 0.100 M NaOH0.100\text{ M}\text{ NaOH}. Instead of determining the pH\text{pH} at equivalence, calculate the percent ionization of the remaining unreacted weak acid after exactly 6.00 mL6.00\text{ mL} of the NaOH\text{NaOH} titrant has been added.

Answer and steps

Final answer

Percent Ionization=0.0125% (or 1.25×10−4)\text{Percent Ionization} = 0.0125\% \text{ (or } 1.25 \times 10^{-4}\text{)}

Steps

01

Determine Initial and Added Amounts (Stoichiometry)

Calculate the initial amount of hypochlorous acid (HClO\ce{HClO}) and the amount of sodium hydroxide (NaOH\ce{NaOH}) added:

  • Initial moles of HClO\ce{HClO}: nHClO,initial=30.0 mL×0.100 M=3.00 mmoln_{\ce{HClO},\text{initial}} = 30.0\text{ mL} \times 0.100\text{ M} = 3.00\text{ mmol}
  • Moles of NaOH\ce{NaOH} added: nNaOH=6.00 mL×0.100 M=0.600 mmoln_{\ce{NaOH}} = 6.00\text{ mL} \times 0.100\text{ M} = 0.600\text{ mmol}

02

Determine Remaining Unreacted Weak Acid

The added strong base (OHX−\ce{OH^-}) completely neutralizes a stoichiometric amount of the weak acid: HClO(aq)+OHX−(aq)→ClOX−(aq)+HX2O(l)\ce{HClO(aq) + OH^-(aq) -> ClO^-(aq) + H2O(l)}

  • Moles of HClO\ce{HClO} consumed: 0.600 mmol0.600\text{ mmol}
  • Moles of conjugate base (ClOX−\ce{ClO^-}) produced: 0.600 mmol0.600\text{ mmol}
  • Moles of unreacted HClO\ce{HClO} remaining: nHClO,remaining=3.00 mmol−0.600 mmol=2.40 mmol=2.40×10−4 moln_{\ce{HClO},\text{remaining}} = 3.00\text{ mmol} - 0.600\text{ mmol} = 2.40\text{ mmol} = 2.40 \times 10^{-4}\text{ mol}

03

Calculate the Percent Ionization of the Remaining Acid

Due to the common ion effect, the presence of the conjugate base ClOX−\ce{ClO^-} dramatically suppresses the further ionization of the remaining HClO\ce{HClO}.

The fractional ionization α\alpha of the remaining weak acid pool is determined by comparing its acid dissociation constant KaK_a to the remaining unreacted acid quantity: α=KanHClO,remaining=3.00×10−82.40×10−4=1.25×10−4\alpha = \frac{K_a}{n_{\ce{HClO},\text{remaining}}} = \frac{3.00 \times 10^{-8}}{2.40 \times 10^{-4}} = 1.25 \times 10^{-4}

Convert the fraction to a percentage: Percent Ionization=α×100%=1.25×10−4×100%=0.0125%\text{Percent Ionization} = \alpha \times 100\% = 1.25 \times 10^{-4} \times 100\% = 0.0125\%

(Common Pitfall: Do not confuse the fraction ionized with the percent ionized; a fraction of 1.25×10−41.25 \times 10^{-4} corresponds directly to 0.0125%0.0125\%.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the common-ion effect from the conjugate base formed during titration and calculates ionization as if only pure unreacted weak acid were present in solution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Moles of HClO remaining=0.0300×0.100−0.00600×0.100=0.00240 mol  ⟹  Total volume=36.0 mL=0.0360 L  ⟹  [HClO]=0.002400.0360=0.0667 M\text{Moles of } \ce{HClO} \text{ remaining} = 0.0300 \times 0.100 - 0.00600 \times 0.100 = 0.00240\text{ mol} \implies \text{Total volume} = 36.0\text{ mL} = 0.0360\text{ L} \implies [\ce{HClO}] = \frac{0.00240}{0.0360} = 0.0667\text{ M}

  2. Step 2

    Ka=[HX+]2[HClO]=3.00×10−8  ⟹  [HX+]=3.00×10−8×0.0667=4.47×10−5 MK_a = \frac{[\ce{H+}]^2}{[\ce{HClO}]} = 3.00 \times 10^{-8} \implies [\ce{H+}] = \sqrt{3.00 \times 10^{-8} \times 0.0667} = 4.47 \times 10^{-5}\text{ M}

    Correct

    HClO(aq)+OHX−(aq)→ClOX−(aq)+HX2O(l)\ce{HClO(aq) + OH^-(aq) -> ClO^-(aq) + H2O(l)}, producing nClOX−=0.600 mmoln_{\ce{ClO^-}} = 0.600\text{ mmol}. Because conjugate base ClOX−\ce{ClO^-} is present, [HX+]≠[ClOX−][\ce{H+}] \neq [\ce{ClO^-}]; the common-ion effect must be included in the equilibrium expression.

    You assumed [HX+]=[ClOX−][\ce{H+}] = [\ce{ClO^-}] as if pure weak acid were dissolving in water. Because the added NaOH\ce{NaOH} converted 0.600 mmol0.600\text{ mmol} of HClO\ce{HClO} into ClOX−\ce{ClO^-}, the substantial presence of conjugate base strongly suppresses the ionization of the remaining acid.

  3. Step 3

    Percent ionization=(4.47×10−50.0667)×100%=0.0670%\text{Percent ionization} = \left(\frac{4.47 \times 10^{-5}}{0.0667}\right) \times 100\% = 0.0670\%

    Correct

    Percent Ionization=0.0125%\text{Percent Ionization} = 0.0125\%

    You evaluated percent ionization correctly using your calculated [HX+][\ce{H+}], but your result was distorted by omitting the common-ion effect in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of weak acid remaining after partial neutralization.

You correctly calculated the new total solution volume and the concentration of unreacted HClO\ce{HClO}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglected Common-Ion Effect in Buffer Region

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the partially titrated solution as a single weak acid dissolving in pure water rather than recognizing that neutralization creates a buffer system containing both the weak acid and its conjugate base.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for Conjugate Base Formation
  • During a weak acid–strong base titration before the equivalence point, every mole of strong base added produces an equimolar amount of the conjugate base: HA+OHX−→AX−+HX2O\ce{HA + OH^- -> A^- + H2O}.

  • Always write out the neutralization reaction first and tally both the unreacted weak acid [HA][\ce{HA}] and the newly formed conjugate base [AX−][\ce{A^-}].

Equilibrium with Common Ion
  • When conjugate base is already present, [HX+]≠[AX−][\ce{H+}] \neq [\ce{A^-}]. The equilibrium expression is Ka=[HX+][AX−][HA]K_a = \frac{[\ce{H+}][\ce{A^-}]}{[\ce{HA}]}.

  • Do not set [HX+]=Ka⋅[HA][\ce{H+}] = \sqrt{K_a \cdot [\ce{HA}]} when conjugate base is present in solution.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the neutralization products: adding 6.00 mL6.00\text{ mL} of 0.100 M NaOH0.100\text{ M } \ce{NaOH} produces 0.600 mmol0.600\text{ mmol} of conjugate base ClOX−\ce{ClO^-}, leaving 2.40 mmol2.40\text{ mmol} of unreacted HClO\ce{HClO}.

  2. Account for the suppression of acid ionization by the common ion ClOX−\ce{ClO^-} using the equilibrium relationship for the remaining acid pool.

  3. Calculate the fractional ionization α=1.25×10−4\alpha = 1.25 \times 10^{-4} and multiply by 100%100\% to get the percent ionization.

Final answer

Percent Ionization=0.0125% (or 1.25×10−4)\text{Percent Ionization} = 0.0125\% \text{ (or } 1.25 \times 10^{-4}\text{)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review titration stoichiometry by always setting up an Initial-Change-End (ICE) or Before-Addition-After table in moles.

  • Identify whether a solution contains a pure weak acid ([HX+]=[AX−][\ce{H+}] = [\ce{A^-}]) or a buffer mixture before choosing which equilibrium formula to apply.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the percent ionization of the remaining unreacted acid with the fraction of original acid converted/neutralized by the titrant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Initial moles of HClO=0.0300×0.100=0.00300 mol  ⟹  Moles of NaOH added=0.00600×0.100=0.000600 mol  ⟹  Moles of HClO reacted=0.000600 mol\text{Initial moles of } \ce{HClO} = 0.0300 \times 0.100 = 0.00300\text{ mol} \implies \text{Moles of } \ce{NaOH} \text{ added} = 0.00600 \times 0.100 = 0.000600\text{ mol} \implies \text{Moles of } \ce{HClO} \text{ reacted} = 0.000600\text{ mol}

  2. Step 2

    Percent ionization=(0.000600/0.00300)×100%=20.0%\text{Percent ionization} = (0.000600 / 0.00300) \times 100\% = 20.0\%

    Correct

    Percent Ionization=α×100%=KanHClO,remaining×100%=3.00×10−82.40×10−4×100%=0.0125%\text{Percent Ionization} = \alpha \times 100\% = \frac{K_a}{n_{\ce{HClO},\text{remaining}}} \times 100\% = \frac{3.00 \times 10^{-8}}{2.40 \times 10^{-4}} \times 100\% = 0.0125\%

    The value (0.000600/0.00300)×100%=20.0%(0.000600 / 0.00300) \times 100\% = 20.0\% represents the percentage of the original acid neutralized by the titrant, not the percent ionization of the unreacted weak acid pool at equilibrium.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial moles of the weak acid from its concentration and volume.

You correctly determined the moles of strong base added from the titrant volume.

You applied the 1:11:1 stoichiometric ratio to find the amount of weak acid neutralized.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neutralization Progress vs. Equilibrium Ionization

You divided the moles of acid neutralized by the initial moles of acid, which gives the percent completion of the titration rather than percent ionization.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated forced neutralization driven by added strong base (HClO+OHX−→ClOX−+HX2O\ce{HClO + OH^- -> ClO^- + H2O}) with reversible acid self-ionization in water (HClO+HX2O⇌HX3OX++ClOX−\ce{HClO + H2O <=> H3O^+ + ClO^-}), which is governed by KaK_a and suppressed by the common ion effect.

REASONING PATH
Your ACEpath teacher’s suggested approach
Neutralization vs. Ionization
  • Forced neutralization is the quantitative reaction of HA\ce{HA} with added OHX−\ce{OH^-}; equilibrium ionization is the spontaneous dissociation of the remaining unreacted HA\ce{HA} in solution.

  • Always find the amount of unreacted weak acid remaining first, then use equilibrium principles (KaK_a and the common ion effect) to find the ionized fraction.

Percent Ionization Definition
  • Percent ionization of remaining weak acid refers to the fraction of that unreacted pool that dissociates into HX3OX+\ce{H3O^+} at equilibrium: α=[HX3OX+]eq[HA]remaining×100%\alpha = \frac{[\ce{H3O^+}]_{\text{eq}}}{[\ce{HA}]_{\text{remaining}}} \times 100\%.

  • Do not plug the moles of added titrant into the percent ionization formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the remaining unreacted weak acid: nHClO,remaining=3.00 mmol−0.600 mmol=2.40 mmol=2.40×10−4 moln_{\ce{HClO},\text{remaining}} = 3.00\text{ mmol} - 0.600\text{ mmol} = 2.40\text{ mmol} = 2.40 \times 10^{-4}\text{ mol}.

  2. Determine the fractional ionization α\alpha of the remaining weak acid pool using its dissociation constant: α=KanHClO,remaining=3.00×10−82.40×10−4=1.25×10−4\alpha = \frac{K_a}{n_{\ce{HClO},\text{remaining}}} = \frac{3.00 \times 10^{-8}}{2.40 \times 10^{-4}} = 1.25 \times 10^{-4}.

  3. Convert this fraction to a percentage: Percent Ionization=1.25×10−4×100%=0.0125%\text{Percent Ionization} = 1.25 \times 10^{-4} \times 100\% = 0.0125\%.

Final answer

Percent Ionization=0.0125% (or 1.25×10−4)\text{Percent Ionization} = 0.0125\% \text{ (or } 1.25 \times 10^{-4}\text{)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Distinguish between stoichiometric reaction progress (percent neutralized) and equilibrium dissociation (percent ionized).

  • When a weak acid is partially titrated, identify the resulting mixture as a buffer containing both unreacted weak acid and its conjugate base.

  • Practice setting up equilibrium expressions for partially titrated weak acid solutions to find [HX+][\ce{H+}] and the corresponding degree of ionization.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the correct equilibrium [H⁺] using the buffer equation but divides by the initial acid concentration rather than the concentration of the remaining unreacted acid to find percent ionization.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Remaining HClO=0.0300×0.100−0.00600×0.100=0.00240 mol  ⟹  Produced ClOX−=0.00600×0.100=0.000600 mol\text{Remaining } \ce{HClO} = 0.0300 \times 0.100 - 0.00600 \times 0.100 = 0.00240\text{ mol} \implies \text{Produced } \ce{ClO^-} = 0.00600 \times 0.100 = 0.000600\text{ mol}

  2. Step 2

    [HX+]=Ka×(moles HClOmoles ClOX−)=3.00×10−8×(0.002400.000600)=1.20×10−7 M[\ce{H^+}] = K_a \times \left( \frac{\text{moles } \ce{HClO}}{\text{moles } \ce{ClO^-}} \right) = 3.00 \times 10^{-8} \times \left( \frac{0.00240}{0.000600} \right) = 1.20 \times 10^{-7}\text{ M}

  3. Step 3

    Percent ionization=(1.20×10−70.100)×100%=1.20×10−4%\text{Percent ionization} = \left( \frac{1.20 \times 10^{-7}}{0.100} \right) \times 100\% = 1.20 \times 10^{-4}\%

    Correct

    Percent ionization=[HX+][HClO]remaining×100%=1.20×10−7 M0.00240 mol0.0360 L×100%=1.80×10−4%\text{Percent ionization} = \frac{[\ce{H^+}]}{[\ce{HClO}]_{\text{remaining}}} \times 100\% = \frac{1.20 \times 10^{-7}\text{ M}}{\frac{0.00240\text{ mol}}{0.0360\text{ L}}} \times 100\% = 1.80 \times 10^{-4}\%

    You divided [HX+][\ce{H^+}] by the initial stock concentration of the acid (0.100 M0.100\text{ M}) rather than the current concentration of the remaining unreacted HClO\ce{HClO} in the mixture, [HClO]remaining=0.00240 mol0.0360 L≈0.0667 M[\ce{HClO}]_{\text{remaining}} = \frac{0.00240\text{ mol}}{0.0360\text{ L}} \approx 0.0667\text{ M}.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately carried out the stoichiometric neutralization calculations to determine the quantities of HClO\ce{HClO} and ClOX−\ce{ClO^-}.

You correctly used the equilibrium ratio to calculate the hydronium ion concentration [HX+][\ce{H^+}] in the buffer solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect denominator in percent ionization

You used the stock concentration 0.100 M0.100\text{ M} in the denominator instead of the diluted, unreacted acid concentration present in the mixture.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The definition of percent ionization of the remaining weak acid requires comparing the equilibrium dissociated amount [HX+][\ce{H^+}] directly to the remaining pool of weak acid ([HA]remaining[\ce{HA}]_{\text{remaining}} or moles of remaining HA\ce{HA}), rather than the starting concentration prior to titration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Reference Quantity
  • When finding the percent ionization of the remaining weak acid in a partially neutralized mixture, the denominator must be [HA]remaining=nHA,remainingVtotal[\ce{HA}]_{\text{remaining}} = \frac{n_{\ce{HA},\text{remaining}}}{V_{\text{total}}}.

  • Always compute the total solution volume (Vinitial+VaddedV_{\text{initial}} + V_{\text{added}}) to determine the concentration of remaining unreacted acid.

Consistent Units in Percent Ionization
  • Percent ionization=[HX+]equil[HA]remaining×100%=nHX+nHA,remaining×100%\text{Percent ionization} = \frac{[\ce{H^+}]_{\text{equil}}}{[\ce{HA}]_{\text{remaining}}} \times 100\% = \frac{n_{\ce{H^+}}}{n_{\ce{HA},\text{remaining}}} \times 100\%.

  • Verify that both numerator and denominator represent the same system at the specified titration point.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the total solution volume after adding titrant: Vtotal=30.0 mL+6.00 mL=36.0 mL=0.0360 LV_{\text{total}} = 30.0\text{ mL} + 6.00\text{ mL} = 36.0\text{ mL} = 0.0360\text{ L}.

  2. Calculate the concentration of unreacted HClO\ce{HClO} in this volume: [HClO]remaining=0.00240 mol0.0360 L=0.0667 M[\ce{HClO}]_{\text{remaining}} = \frac{0.00240\text{ mol}}{0.0360\text{ L}} = 0.0667\text{ M}.

  3. Calculate the percent ionization of the remaining acid: Percent ionization=1.20×10−7 M0.0667 M×100%=1.80×10−4%\text{Percent ionization} = \frac{1.20 \times 10^{-7}\text{ M}}{0.0667\text{ M}} \times 100\% = 1.80 \times 10^{-4}\%.

Final answer

1.80×10−4%1.80 \times 10^{-4}\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of percent ionization in buffered and partially titrated solutions.

  • Practice identifying the correct denominator when titrations alter both total volume and remaining moles of analyte.

Lock it in

Similar question

01

A solution contains 0.20 M HNOX20.20\text{ M } \ce{HNO2} (Ka=4.0×10−4K_a = 4.0 \times 10^{-4}) and 0.10 M NaNOX20.10\text{ M } \ce{NaNO2}. Calculate the equilibrium concentration of HX3OX+\ce{H3O+} and the percent ionization of HNOX2\ce{HNO2}.

Answer

[HX3OX+]=8.0×10−4 M[\ce{H3O+}] = 8.0 \times 10^{-4}\text{ M}, Percent Ionization=0.40%\text{Percent Ionization} = 0.40\%. Key steps: Ka=[HX3OX+][NOX2X−][HNOX2]  ⟹  [HX3OX+]=4.0×10−4×0.200.10=8.0×10−4 MK_a = \frac{[\ce{H3O+}][\ce{NO2^-}]}{[\ce{HNO2}]} \implies [\ce{H3O+}] = 4.0 \times 10^{-4} \times \frac{0.20}{0.10} = 8.0 \times 10^{-4}\text{ M}. Percent ionization =8.0×10−40.20×100%=0.40%= \frac{8.0 \times 10^{-4}}{0.20} \times 100\% = 0.40\%.

02

A 50.0 mL50.0\text{ mL} sample of 0.120 M0.120\text{ M} acetic acid (CHX3COOH\ce{CH3COOH}, Ka=1.80×10−5K_a = 1.80 \times 10^{-5}) is titrated with 0.120 M NaOH0.120\text{ M } \ce{NaOH}. After adding 10.0 mL10.0\text{ mL} of titrant, what is the concentration of HX3OX+\ce{H3O+} in the solution?

Answer

[HX3OX+]=7.20×10−5 M[\ce{H3O+}] = 7.20 \times 10^{-5}\text{ M}. Key steps: Initial acid =6.00 mmol= 6.00\text{ mmol}, OHX−\ce{OH^-} added =1.20 mmol= 1.20\text{ mmol}. Remaining CHX3COOH=4.80 mmol\ce{CH3COOH} = 4.80\text{ mmol}, CHX3COOX−\ce{CH3COO^-} formed =1.20 mmol= 1.20\text{ mmol}. Total volume =60.0 mL= 60.0\text{ mL}. Using Ka=[HX3OX+][AX−][HA]K_a = [\ce{H3O+}] \frac{[\ce{A^-}]}{[\ce{HA}]}, [HX3OX+]=1.80×10−5×4.801.20=7.20×10−5 M[\ce{H3O+}] = 1.80 \times 10^{-5} \times \frac{4.80}{1.20} = 7.20 \times 10^{-5}\text{ M}.

03

Compare the percent ionization of 0.050 M HF0.050\text{ M } \ce{HF} (Ka=6.8×10−4K_a = 6.8 \times 10^{-4}) in pure water versus in a solution that is also 0.050 M NaF0.050\text{ M } \ce{NaF}.

Answer

In pure water: 11.7%11.7\%; in presence of 0.050 M NaF0.050\text{ M } \ce{NaF}: 1.36%1.36\%. Key steps: Pure water: [HX+]=Kac=(6.8×10−4)(0.050)=5.83×10−3 M[\ce{H+}] = \sqrt{K_a c} = \sqrt{(6.8 \times 10^{-4})(0.050)} = 5.83 \times 10^{-3}\text{ M} (or solving quadratic gives 5.50×10−3 M  ⟹  11.0%5.50 \times 10^{-3}\text{ M} \implies 11.0\%). With common ion: [HX+]=Ka[HF][FX−]=6.8×10−4 M  ⟹  6.8×10−40.050×100%=1.36%[\ce{H+}] = K_a \frac{[\ce{HF}]}{[\ce{F^-}]} = 6.8 \times 10^{-4}\text{ M} \implies \frac{6.8 \times 10^{-4}}{0.050} \times 100\% = 1.36\%. This highlights the dramatic suppression by the common ion.

Loading workspace…