Resources

An analytical chemist measures the solubility of an unknown organic alcohol in liquid water at 20∘C20^\circ\text{C} to be 8.00×103 mg8.00\times 10^3\text{ mg} per 100.0 mL100.0\text{ mL} of water. Convert this solubility into molar concentration (mol/L\text{mol/L}) given that the alcohol has a molar mass of 74.12 g/mol74.12\text{ g/mol}, and explain in terms of competing intermolecular forces why 1-butanol has limited water solubility whereas ethanol is completely miscible in water.

Answer and steps

Final answer

Calculated molar solubility: 1.08 mol/L1.08\text{ mol/L} (from 8.00 g0.1000 L×1 mol74.12 g=1.079 mol/L\frac{8.00\text{ g}}{0.1000\text{ L}} \times \frac{1\text{ mol}}{74.12\text{ g}} = 1.079\text{ mol/L}). While both alcohols possess a polar −OH-\text{OH} group capable of hydrogen bonding with water, 1-butanol possesses a nonpolar four-carbon aliphatic chain (\-C4H9\-\text{C}_4\text{H}_9) whose extensive London dispersion self-interactions and hydrophobic disruption of the water hydrogen-bonding network outweigh the favorable solvation enthalpy, whereas ethanol has a short two-carbon hydrophobic tail (\-C2H5\-\text{C}_2\text{H}_5) that minimally perturbs water structure, yielding complete miscibility.

Steps

01

Convert Mass and Volume to Standard Units

First, convert the given mass of the alcohol from milligrams to grams: Mass=8.00×103 mg×1 g1000 mg=8.00 g\text{Mass} = 8.00 \times 10^3\text{ mg} \times \frac{1\text{ g}}{1000\text{ mg}} = 8.00\text{ g}

Next, convert the volume of water from milliliters to liters: Volume=100.0 mL×1 L1000 mL=0.1000 L\text{Volume} = 100.0\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.1000\text{ L}


02

Calculate the Molar Solubility (mol/L\text{mol/L})

Find the moles of the alcohol using its molar mass (M=74.12 g/molM = 74.12\text{ g/mol}): n=mM=8.00 g74.12 g/mol=0.10793 moln = \frac{m}{M} = \frac{8.00\text{ g}}{74.12\text{ g/mol}} = 0.10793\text{ mol}

Now calculate the molar concentration (molarity, CC): C=nV=0.10793 mol0.1000 L≈1.08 mol/LC = \frac{n}{V} = \frac{0.10793\text{ mol}}{0.1000\text{ L}} \approx 1.08\text{ mol/L}

Common Pitfall: Avoid dividing milligrams directly by the molar mass in g/mol\text{g/mol} without converting units, which causes a factor-of-1000 error.


03

Compare Intermolecular Forces in Ethanol vs. 1-Butanol

The solubility of alcohols in water is governed by a balance between hydrophilic (water-loving) and hydrophobic (water-fearing) regions of the molecule:

  1. Hydrophilic Hydroxyl Group (−OH-\ce{OH}): Both ethanol (CX2HX5OH\ce{C2H5OH}) and 1-butanol (CX4HX9OH\ce{C4H9OH}) possess a polar −OH-\ce{OH} group capable of acting as both a hydrogen-bond donor and acceptor with liquid water molecules (HX2O⋯H−O−R\ce{H2O}\cdots\ce{H-O-R}).
  2. Hydrophobic Alkyl Chain: The nonpolar hydrocarbon tail can only engage in weak London dispersion forces with surrounding water molecules and cannot form hydrogen bonds.
  3. Competing Interactions and Chain Length:

    • Ethanol (CX2HX5OH\ce{C2H5OH}): Contains a short, two-carbon nonpolar tail (−CX2HX5\ce{-C2H5}). The strong hydrogen bonds formed between the −OH-\ce{OH} group and water easily compensate for the minimal disruption to the water-water hydrogen-bonding network. As a result, ethanol is completely miscible with water in all proportions.
    • 1-Butanol (CX4HX9OH\ce{C4H9OH}): Contains a larger, four-carbon nonpolar chain (−CX4HX9\ce{-C4H9}). Accommodating this bulky nonpolar group requires breaking multiple strong water-water hydrogen bonds to carve out a cavity in the solvent. Because the weak dispersion interactions between the butyl chain and water cannot energetically make up for the lost hydrogen bonds and the attractive dispersion forces between butanol molecules themselves, 1-butanol has limited water solubility (1.08 mol/L1.08\text{ mol/L}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert milligrams to grams when calculating moles, resulting in a molar concentration that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Mass=8.00×103 g  ⟹  Volume=100.0 mL=0.1000 L\text{Mass} = 8.00 \times 10^3\text{ g} \implies \text{Volume} = 100.0\text{ mL} = 0.1000\text{ L}

    Correct

    Mass=8.00×103 mg×1 g1000 mg=8.00 g  ⟹  Volume=100.0 mL=0.1000 L\text{Mass} = 8.00 \times 10^3\text{ mg} \times \frac{1\text{ g}}{1000\text{ mg}} = 8.00\text{ g} \implies \text{Volume} = 100.0\text{ mL} = 0.1000\text{ L}

    You correctly converted the volume from milliliters to liters, but you copied the mass directly as grams without converting 8.00×103 mg8.00 \times 10^3\text{ mg} into grams (8.00 g8.00\text{ g}).

  2. Step 2

    Moles=8.00×103 g74.12 g/mol=107.93 mol  ⟹  Molarity=107.93 mol0.1000 L=1080 mol/L\text{Moles} = \frac{8.00 \times 10^3\text{ g}}{74.12\text{ g/mol}} = 107.93\text{ mol} \implies \text{Molarity} = \frac{107.93\text{ mol}}{0.1000\text{ L}} = 1080\text{ mol/L}

    Correct

    Moles=8.00 g74.12 g/mol=0.10793 mol  ⟹  Molarity=0.10793 mol0.1000 L≈1.08 mol/L\text{Moles} = \frac{8.00\text{ g}}{74.12\text{ g/mol}} = 0.10793\text{ mol} \implies \text{Molarity} = \frac{0.10793\text{ mol}}{0.1000\text{ L}} \approx 1.08\text{ mol/L}

    You used the correct definitions for moles (n=mMn = \frac{m}{M}) and molarity (C=nVC = \frac{n}{V}), but because your initial mass was off by a factor of 10001000, your final concentration is 10001000 times too large.

  3. Step 3

    Both alcohols have −OH-\text{OH} groups that form hydrogen bonds with water. 1-butanol has a larger nonpolar four-carbon chain compared to the two-carbon chain in ethanol. The longer hydrophobic hydrocarbon tail disrupts water's hydrogen bonding network, decreasing solubility.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the solvent volume from milliliters to liters.

You applied the correct molarity and mole formulas.

You provided a thorough and accurate comparison of the competing intermolecular forces.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted metric prefix conversion

You read 8.00×103 mg8.00 \times 10^3\text{ mg} and wrote it down as 8.00×103 g8.00 \times 10^3\text{ g}, skipping the conversion from milligrams to grams.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the given numerical value in scientific notation as if it were already in the standard base unit (grams), overlooking the metric prefix 'milli-' (1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match units before substituting into molar mass
  • Molar mass is expressed in g/mol\text{g/mol}, so solute mass must be in grams before dividing.

  • Always circle given units in the problem and convert milligrams to grams using 1 g=1000 mg1\text{ g} = 1000\text{ mg}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the given mass to grams: m=8.00×103 mg×1 g1000 mg=8.00 gm = 8.00 \times 10^3\text{ mg} \times \frac{1\text{ g}}{1000\text{ mg}} = 8.00\text{ g}.

  2. Calculate moles of alcohol: n=8.00 g74.12 g/mol=0.10793 moln = \frac{8.00\text{ g}}{74.12\text{ g/mol}} = 0.10793\text{ mol}.

  3. Calculate molar concentration: C=0.10793 mol0.1000 L=1.08 mol/LC = \frac{0.10793\text{ mol}}{0.1000\text{ L}} = 1.08\text{ mol/L}.

Final answer

1.08 mol/L1.08\text{ mol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before starting calculations, write down the units for each given quantity and verify that mass matches the molar mass unit (grams).

  • Check that the calculated molarity is physically reasonable for a moderately soluble organic alcohol.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the 100.0 mL volume as already being 1 L, omitting the volume division factor and reporting moles per 100 mL as the molarity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Mass=8.00×103 mg=8.00 g  ⟹  Moles=8.00 g/74.12 g/mol=0.108 mol\text{Mass} = 8.00\times 10^3\text{ mg} = 8.00\text{ g} \implies \text{Moles} = 8.00\text{ g} / 74.12\text{ g/mol} = 0.108\text{ mol}

  2. Step 2

    Molarity=0.108 mol/L\text{Molarity} = 0.108\text{ mol/L}

    Correct

    C=nV=0.1079 mol0.1000 L=1.08 mol/LC = \frac{n}{V} = \frac{0.1079\text{ mol}}{0.1000\text{ L}} = 1.08\text{ mol/L}

    You treated the calculated moles as the molarity directly, forgetting to divide by the volume of water (100.0 mL=0.1000 L100.0\text{ mL} = 0.1000\text{ L}). Molarity is defined as moles of solute per liter of solution.

  3. Step 3

    Both ethanol and 1-butanol can form hydrogen bonds with water through their −OH-\text{OH} groups. Ethanol's short alkyl chain easily integrates into water's hydrogen-bonded structure. 1-butanol's larger nonpolar alkyl chain cannot hydrogen bond with water, making it only partially soluble.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted milligrams to grams correctly.

You calculated the number of moles of the solute accurately using the given molar mass.

You correctly identified hydrogen bonding through the hydroxyl group as the favorable interaction with water.

You correctly contrasted the steric and hydrophobic impact of the shorter ethyl chain versus the longer butyl chain.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Volume in Concentration Calculation

You equated the number of moles in a 100.0 mL100.0\text{ mL} sample directly to the concentration in moles per liter.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the volume denominator in the definition of molar concentration (M=n/VM = n/V), mistakenly assuming the calculated mole quantity was already per liter.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Molarity Explicitly
  • Molarity (M)=moles of solute (n)volume of solution in liters (V)\text{Molarity } (M) = \frac{\text{moles of solute } (n)}{\text{volume of solution in liters } (V)}

  • Always write down the formula C=nVC = \frac{n}{V} before writing down numbers, and explicitly check whether the given volume is 1 L1\text{ L} or a fractional volume like 100.0 mL=0.1000 L100.0\text{ mL} = 0.1000\text{ L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the given volume of water to liters: V=100.0 mL×1 L1000 mL=0.1000 LV = 100.0\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.1000\text{ L}.

  2. Divide the moles of solute by the volume in liters: C=0.1079 mol0.1000 L=1.079 mol/LC = \frac{0.1079\text{ mol}}{0.1000\text{ L}} = 1.079\text{ mol/L}.

  3. Round to three significant figures to match the given data: 1.08 mol/L1.08\text{ mol/L}.

Final answer

Calculated molar solubility: 1.08 mol/L1.08\text{ mol/L}. Both alcohols possess polar −OH-\text{OH} groups that form hydrogen bonds with water, but 1-butanol's nonpolar four-carbon aliphatic chain disrupts the water hydrogen-bonding network significantly more than ethanol's two-carbon chain, limiting its solubility.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full formula M=nVM = \frac{n}{V} with explicit units before substituting numbers.

  • Make it a habit to check the volume term in concentration problems whenever the volume is not 1 L1\text{ L}.

OverviewACEpath Teacher's Diagnosis

03 The student attributes the difference in solubility solely to the presence versus absence of hydrogen bonding rather than the competing effects of the nonpolar hydrocarbon tail.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Mass=8.00×103 mg=8.00 g  ⟹  Volume=0.1000 L  ⟹  Moles=8.00 g74.12 g/mol=0.108 mol  ⟹  Molarity=0.108 mol0.1000 L=1.08 mol/L\text{Mass} = 8.00 \times 10^3\text{ mg} = 8.00\text{ g} \implies \text{Volume} = 0.1000\text{ L} \implies \text{Moles} = \frac{8.00\text{ g}}{74.12\text{ g/mol}} = 0.108\text{ mol} \implies \text{Molarity} = \frac{0.108\text{ mol}}{0.1000\text{ L}} = 1.08\text{ mol/L}

  2. Step 2

    Ethanol forms strong hydrogen bonds with water molecules, allowing complete miscibility.

  3. Step 3

    1-butanol cannot form hydrogen bonds with water and only experiences London dispersion forces. Because it lacks hydrogen bonding with water, 1-butanol has limited solubility.

    Correct

    1-butanol contains a polar −OH-\ce{OH} group that does hydrogen-bond with water, but its larger four-carbon nonpolar tail (−CX4HX9\ce{-C4H9}) disrupts the water hydrogen-bonding network and cannot provide sufficient solvation energy to allow complete miscibility.

    Like ethanol, 1-butanol is an alcohol and has a polar −OH-\ce{OH} group that actively hydrogen-bonds with water. Its limited solubility is caused by the larger hydrophobic four-carbon alkyl chain, which requires breaking favorable water-water hydrogen bonds without sufficient compensating interactions.

WHAT YOU DID WELL
Compliments from Your Teacher

You performed all mass, volume, and molarity calculations correctly with proper significant figures.

You recognized the role of hydrogen bonding in promoting solubility in water.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Intermolecular forces in organic solubility

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated 1-butanol as lacking the −OH-\ce{OH} functional group entirely, missing that all aliphatic alcohols retain hydrogen-bonding capability through their hydroxyl group while the length of the nonpolar alkyl chain determines the hydrophobic penalty.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Functional Groups Consistently
  • Any molecule ending in −OH-\ce{OH} (such as 1-butanol, CHX3CHX2CHX2CHX2OH\ce{CH3CH2CH2CH2OH}) contains a hydroxyl group capable of donating and accepting hydrogen bonds with water.

  • Always draw or inspect the functional group first to confirm that the polar −OH-\ce{OH} moiety is present regardless of chain length.

Evaluate Competing Hydrophobic and Hydrophilic Regions
  • In organic solutes, solubility in water is a balance between favorable −OH⋯HX2O-\ce{OH}\cdots\ce{H2O} hydrogen bonds and the energetic cost of disrupting the water network to accommodate the nonpolar alkyl chain.

  • Attribute decreasing alcohol solubility to the increasing size of the nonpolar hydrocarbon tail, not to a loss of hydrogen bonding.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that both ethanol (CX2HX5OH\ce{C2H5OH}) and 1-butanol (CX4HX9OH\ce{C4H9OH}) contain a polar hydroxyl group that forms hydrogen bonds with water.

  2. Compare the hydrocarbon portions: ethanol has a small two-carbon ethyl group, while 1-butanol has a four-carbon butyl chain.

  3. Explain that accommodating the larger nonpolar butyl chain requires disrupting many strong water-water hydrogen bonds, which the weak dispersion interactions cannot overcome, limiting 1-butanol's solubility.

Final answer

1.08 mol/L1.08\text{ mol/L}; both alcohols hydrogen-bond with water via −OH-\ce{OH}, but the larger nonpolar butyl group in 1-butanol disrupts water structure and limits solubility.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the flashcards on alcohol functional groups and the hydrophobic effect.

  • Practice comparing solubility trends across homologous alcohol series (methanol to 1-hexanol).

Lock it in

Similar question

01

A sample contains 5.20×102 mg5.20 \times 10^2\text{ mg} of glucose (molar mass=180.16 g/mol\text{molar mass} = 180.16\text{ g/mol}) dissolved in 250.0 mL250.0\text{ mL} of water. What is the molar concentration of glucose in mol/L\text{mol/L}?

Answer

Convert mass: 5.20×102 mg=0.520 g5.20 \times 10^2\text{ mg} = 0.520\text{ g}. Moles: n=0.520 g180.16 g/mol=2.886×10−3 moln = \frac{0.520\text{ g}}{180.16\text{ g/mol}} = 2.886 \times 10^{-3}\text{ mol}. Volume: V=0.2500 LV = 0.2500\text{ L}. Molarity: C=2.886×10−3 mol0.2500 L=1.15×10−2 mol/LC = \frac{2.886 \times 10^{-3}\text{ mol}}{0.2500\text{ L}} = 1.15 \times 10^{-2}\text{ mol/L} (0.0115 mol/L0.0115\text{ mol/L}).

02

The solubility of benzoic acid (molar mass=122.12 g/mol\text{molar mass} = 122.12\text{ g/mol}) in water at 25∘C25^\circ\text{C} is 3.40 g/L3.40\text{ g/L}. How many milligrams of benzoic acid are dissolved in 50.0 mL50.0\text{ mL} of a saturated solution, and what is its molarity?

Answer

Mass in 50.0 mL50.0\text{ mL}: m=3.40 g/L×0.0500 L=0.170 g=170 mgm = 3.40\text{ g/L} \times 0.0500\text{ L} = 0.170\text{ g} = 170\text{ mg}. Molarity: C=3.40 g/L122.12 g/mol=2.78×10−2 mol/LC = \frac{3.40\text{ g/L}}{122.12\text{ g/mol}} = 2.78 \times 10^{-2}\text{ mol/L} (0.0278 mol/L0.0278\text{ mol/L}).

03

Compare the aqueous solubility of 1-propanol (CHX3CHX2CHX2OH\ce{CH3CH2CH2OH}) and 1-hexanol (CHX3(CHX2)X5OH\ce{CH3(CH2)5OH}) at 20∘C20^\circ\text{C}. Predict which is miscible and explain why in terms of competing intermolecular forces.

Answer

1-Propanol is miscible with water, whereas 1-hexanol has very low solubility. Both molecules form hydrogen bonds with water via their polar −OH-\ce{OH} groups. However, 1-hexanol has a much longer six-carbon nonpolar hydrophobic tail. Accommodating this large nonpolar chain requires disrupting many strong water-water hydrogen bonds without sufficient compensating interactions, making dissolution thermodynamically unfavorable.

Loading workspace…