Resources

In an analytical standardization experiment, a 0.4285 g0.4285\,\text{g} sample of primary-standard potassium hydrogen phthalate, KHC8H4O4\text{KHC}_8\text{H}_4\text{O}_4 (abbreviated KHP\text{KHP}, molar mass =204.22 g/mol= 204.22\,\text{g/mol}), is dissolved in 50.0 mL50.0\,\text{mL} of distilled water and titrated with a freshly prepared sodium hydroxide solution, NaOH(aq)\text{NaOH}(aq), using a calibrated 50.00 mL50.00\,\text{mL} Class A buret. The reaction reaches the phenolphthalein end point after the addition of exactly 23.45 mL23.45\,\text{mL} of NaOH\text{NaOH}. Predict the products, write the balanced molecular equation, and calculate the exact standardized molar concentration of the NaOH\text{NaOH} titrant.

Answer and steps

Final answer

KHC8H4O4(aq)+NaOH(aq)→KNaC8H4O4(aq)+H2O(l)\text{KHC}_8\text{H}_4\text{O}_4(aq) + \text{NaOH}(aq) \rightarrow \text{KNaC}_8\text{H}_4\text{O}_4(aq) + \text{H}_2\text{O}(l); [NaOH]=0.08947 M[\text{NaOH}] = 0.08947\,\text{M}

Steps

01

Identify the Reaction Type and Predict the Products

Potassium hydrogen phthalate, KHCX8HX4OX4\ce{KHC8H4O4} (abbreviated KHP\ce{KHP}), acts as a monoprotic acid in aqueous solution. It contains one ionizable carboxyl proton (HX+\ce{H+}) and one potassium ion (KX+\ce{K+}) balancing the monobasic hydrogen phthalate ion (HCX8HX4OX4X−\ce{HC8H4O4-}).

When titrated with the strong base sodium hydroxide (NaOH\ce{NaOH}), an acid-base neutralization reaction occurs:

  • The acidic proton of the hydrogen phthalate ion combines with the hydroxide ion (OHX−\ce{OH-}) from NaOH\ce{NaOH} to form liquid water, HX2O(l)\ce{H2O(l)}.
  • The remaining ions (KX+\ce{K+}, NaX+\ce{Na+}, and the bivalent phthalate ion CX8HX4OX4X2−\ce{C8H4O4^2-}) form the aqueous salt potassium sodium phthalate, KNaCX8HX4OX4(aq)\ce{KNaC8H4O4(aq)}.

The balanced molecular equation is: KHCX8HX4OX4(aq)+NaOH(aq)→KNaCX8HX4OX4(aq)+HX2O(l)\ce{KHC8H4O4}(aq) + \ce{NaOH}(aq) \rightarrow \ce{KNaC8H4O4}(aq) + \ce{H2O}(l)

The stoichiometric ratio between KHP\ce{KHP} and NaOH\ce{NaOH} is 1:11:1.


02

Calculate the Moles of Primary-Standard KHP

Using the given mass and molar mass of KHP\ce{KHP}: nKHP=mKHPMKHP=0.4285 g204.22 g/mol≈2.0982×10−3 moln_{\ce{KHP}} = \frac{m_{\ce{KHP}}}{M_{\ce{KHP}}} = \frac{0.4285\text{ g}}{204.22\text{ g/mol}} \approx 2.0982 \times 10^{-3}\text{ mol}

(Note: The volume of distilled water used to dissolve the solid, 50.0 mL50.0\text{ mL}, does not affect the total moles of KHP\ce{KHP} titrated.)


03

Determine the Moles and Concentration of NaOH\ce{NaOH}

From the 1:11:1 stoichiometric relationship: nNaOH=nKHP=2.0982×10−3 moln_{\ce{NaOH}} = n_{\ce{KHP}} = 2.0982 \times 10^{-3}\text{ mol}

Convert the equivalence volume of NaOH\ce{NaOH} from milliliters to liters: VNaOH=23.45 mL=0.02345 LV_{\ce{NaOH}} = 23.45\text{ mL} = 0.02345\text{ L}

Calculate the molar concentration of the standardized NaOH\ce{NaOH} solution: [NaOH]=nNaOHVNaOH=2.0982×10−3 mol0.02345 L≈0.08947 M[\ce{NaOH}] = \frac{n_{\ce{NaOH}}}{V_{\ce{NaOH}}} = \frac{2.0982 \times 10^{-3}\text{ mol}}{0.02345\text{ L}} \approx 0.08947\text{ M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses KHP with a diprotic acid due to seeing two hydrogen atoms in the abbreviated formula and applies an incorrect 1:2 stoichiometric ratio between KHP and NaOH.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    KHC8H4O4(aq)+2NaOH(aq)→Na2C8H4O4(aq)+KOH(aq)+H2O(l)\text{KHC}_8\text{H}_4\text{O}_4(aq) + 2\text{NaOH}(aq) \rightarrow \text{Na}_2\text{C}_8\text{H}_4\text{O}_4(aq) + \text{KOH}(aq) + \text{H}_2\text{O}(l)

    Correct

    KHC8H4O4(aq)+NaOH(aq)→KNaC8H4O4(aq)+H2O(l)\text{KHC}_8\text{H}_4\text{O}_4(aq) + \text{NaOH}(aq) \rightarrow \text{KNaC}_8\text{H}_4\text{O}_4(aq) + \text{H}_2\text{O}(l)

    Potassium hydrogen phthalate (KHP\text{KHP}) is the monopotassium salt of phthalic acid and contains only one acidic, ionizable carboxylic proton. It neutralizes NaOH\text{NaOH} in a 1:11:1 stoichiometric mole ratio to produce aqueous potassium sodium phthalate and water, rather than displacing potassium ion to form KOH\text{KOH}.

  2. Step 2

    moles KHP=0.4285 g/204.22 g/mol=0.002098 mol\text{moles KHP} = 0.4285\text{ g} / 204.22\text{ g/mol} = 0.002098\text{ mol}

  3. Step 3

    moles NaOH=2×0.002098 mol=0.004196 mol\text{moles NaOH} = 2 \times 0.002098\text{ mol} = 0.004196\text{ mol}

    Correct

    nNaOH=nKHP=0.0020982 moln_{\text{NaOH}} = n_{\text{KHP}} = 0.0020982\text{ mol}

    Because of the 1:21:2 coefficient from your equation in Step 1, you multiplied the moles of KHP\text{KHP} by 22. With the correct 1:11:1 stoichiometry, nNaOH=nKHPn_{\text{NaOH}} = n_{\text{KHP}}.

  4. Step 4

    Molarity of NaOH=0.004196 mol/0.02345 L=0.1790 M\text{Molarity of NaOH} = 0.004196\text{ mol} / 0.02345\text{ L} = 0.1790\text{ M}

    Correct

    [NaOH]=2.0982×10−3 mol0.02345 L≈0.08947 M[\text{NaOH}] = \frac{2.0982 \times 10^{-3}\text{ mol}}{0.02345\text{ L}} \approx 0.08947\text{ M}

    You correctly carried out the division of moles by volume in liters, but the resulting concentration is doubled due to the carried-forward stoichiometric error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined the moles of KHP\text{KHP} from its mass and molar mass.

You correctly converted the titrant volume from 23.45 mL23.45\text{ mL} to 0.02345 L0.02345\text{ L} before computing molarity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Reaction Stoichiometry

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that potassium hydrogen phthalate requires two equivalents of sodium hydroxide and displaces K+\text{K}^+ to form KOH\text{KOH}, overlooking that KHP\text{KHP} is already a half-neutralized salt containing exactly one titratable proton (1:11:1 neutralization with OH−\text{OH}^-).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Ionizable Protons in Acid Salts
  • Potassium hydrogen phthalate (KHC8H4O4\text{KHC}_8\text{H}_4\text{O}_4) has one K+\text{K}^+ spectator cation and one monovalent anion (HC8H4O4−\text{HC}_8\text{H}_4\text{O}_4^-) with a single ionizable carboxyl group (−COOH-\text{COOH}).

  • Always treat KHP\text{KHP} as a monoprotic acid when titrating against strong bases like NaOH\text{NaOH} (1 mol KHP:1 mol NaOH1\text{ mol KHP} : 1\text{ mol NaOH}).

Predict Salt Products in Neutralization
  • Neutralizing an acid salt with a strong base yields a mixed-cation salt and water, not a second strong base like KOH\text{KOH} in aqueous solution.

  • Combine K+\text{K}^+, Na+\text{Na}^+, and the fully deprotonated phthalate ion C8H4O42−\text{C}_8\text{H}_4\text{O}_4^{2-} into KNaC8H4O4(aq)+H2O(l)\text{KNaC}_8\text{H}_4\text{O}_4(aq) + \text{H}_2\text{O}(l).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. nNaOH=nKHP=0.4285 g204.22 g/mol=2.0982×10−3 moln_{\text{NaOH}} = n_{\text{KHP}} = \frac{0.4285\text{ g}}{204.22\text{ g/mol}} = 2.0982 \times 10^{-3}\text{ mol}

  2. VNaOH=23.45 mL=0.02345 LV_{\text{NaOH}} = 23.45\text{ mL} = 0.02345\text{ L}

  3. MNaOH=2.0982×10−3 mol0.02345 L=0.08947 MM_{\text{NaOH}} = \frac{2.0982 \times 10^{-3}\text{ mol}}{0.02345\text{ L}} = 0.08947\text{ M}

Final answer

KHC8H4O4(aq)+NaOH(aq)→KNaC8H4O4(aq)+H2O(l)\text{KHC}_8\text{H}_4\text{O}_4(aq) + \text{NaOH}(aq) \rightarrow \text{KNaC}_8\text{H}_4\text{O}_4(aq) + \text{H}_2\text{O}(l); [NaOH]=0.08947 M[\text{NaOH}] = 0.08947\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the structural formula of potassium hydrogen phthalate to see why only one proton is titratable.

  • Practice identifying whether common primary-standard acid salts (e.g., KHP\text{KHP}, KH(IO3)2\text{KH(IO}_3)_2) are monoprotic or polyprotic before writing titration equations.

OverviewACEpath Teacher's Diagnosis

02 The student divides moles of solute by the volume of water used to dissolve the primary standard rather than the volume of NaOH delivered from the buret.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    KHC8H4O4(aq)+NaOH(aq)→KNaC8H4O4(aq)+H2O(l)\text{KHC}_8\text{H}_4\text{O}_4(aq) + \text{NaOH}(aq) \rightarrow \text{KNaC}_8\text{H}_4\text{O}_4(aq) + \text{H}_2\text{O}(l)

  2. Step 2

    moles KHP=0.4285 g204.22 g/mol=0.002098 mol  ⟹  moles NaOH=0.002098 mol\text{moles KHP} = \frac{0.4285\text{ g}}{204.22\text{ g/mol}} = 0.002098\text{ mol} \implies \text{moles NaOH} = 0.002098\text{ mol}

  3. Step 3

    Molarity of NaOH=0.002098 mol0.0500 L=0.0420 M\text{Molarity of NaOH} = \frac{0.002098\text{ mol}}{0.0500\text{ L}} = 0.0420\text{ M}

    Correct

    [NaOH]=2.0982×10−3 mol0.02345 L=0.08947 M[\text{NaOH}] = \frac{2.0982 \times 10^{-3}\text{ mol}}{0.02345\text{ L}} = 0.08947\text{ M}

    You divided by 0.0500 L0.0500\,\text{L} (50.0 mL50.0\,\text{mL}), which is the volume of solvent water in the flask used to dissolve the solid KHP\text{KHP}. To find the concentration of the NaOH\text{NaOH} solution, you must divide by the volume of NaOH\text{NaOH} dispensed from the buret, which is 23.45 mL=0.02345 L23.45\,\text{mL} = 0.02345\,\text{L}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly predicted the products and wrote the balanced neutralization equation.

You accurately converted the mass of primary-standard KHP\text{KHP} to moles.

You correctly applied the 1:11:1 stoichiometric ratio between KHP\text{KHP} and NaOH\text{NaOH}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Volume in Molarity Calculation

You substituted the flask solvent volume instead of the buret delivery volume into the molarity formula for the titrant.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the volume of water used to dissolve an analyte with the volume of titrant delivered from the buret during a titration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity of Titrant Definition
  • The concentration of a titrant is defined as [Titrant]=ntitrantVtitrant delivered[\text{Titrant}] = \frac{n_{\text{titrant}}}{V_{\text{titrant delivered}}}.

  • Always identify which substance's concentration is being calculated and match its moles to its own solution volume dispensed from the buret.

Role of Solvent in the Receiving Flask
  • The water used to dissolve the primary standard does not alter the number of moles of acid present in the flask.

  • Treat the volume of water added to dissolve solid primary standards as a medium for reaction that does not enter into the titrant concentration formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the volume of NaOH\text{NaOH} delivered from the buret into liters: VNaOH=23.45 mL=0.02345 LV_{\text{NaOH}} = 23.45\,\text{mL} = 0.02345\,\text{L}.

  2. Divide the moles of NaOH\text{NaOH} by the delivered volume: [NaOH]=2.0982×10−3 mol0.02345 L=0.08947 M[\text{NaOH}] = \frac{2.0982 \times 10^{-3}\,\text{mol}}{0.02345\,\text{L}} = 0.08947\,\text{M}.

Final answer

[NaOH]=0.08947 M[\text{NaOH}] = 0.08947\,\text{M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review titration terminology to distinguish analyte dissolution volume from titrant delivery volume.

  • Practice standardizing solutions by explicitly labeling VflaskV_{\text{flask}} and VburetV_{\text{buret}} before calculating molarity.

OverviewACEpath Teacher's Diagnosis

03 The student neglects to convert the titrant volume from milliliters to liters when calculating molarity, resulting in a concentration that is too small by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    KHCX8HX4OX4(aq)+NaOH(aq)→KNaCX8HX4OX4(aq)+HX2O(l)\ce{KHC8H4O4}(aq) + \ce{NaOH}(aq) \rightarrow \ce{KNaC8H4O4}(aq) + \ce{H2O}(l)

  2. Step 2

    nKHP=0.4285 g204.22 g/mol=0.002098 moln_{\ce{KHP}} = \frac{0.4285\text{ g}}{204.22\text{ g/mol}} = 0.002098\text{ mol}

  3. Step 3

    nNaOH=0.002098 moln_{\ce{NaOH}} = 0.002098\text{ mol}

  4. Step 4

    [NaOH]=0.002098 mol23.45 mL=8.948×10−5 M[\ce{NaOH}] = \frac{0.002098\text{ mol}}{23.45\text{ mL}} = 8.948 \times 10^{-5}\text{ M}

    Correct

    [NaOH]=2.0982×10−3 mol0.02345 L≈0.08947 M[\ce{NaOH}] = \frac{2.0982 \times 10^{-3}\text{ mol}}{0.02345\text{ L}} \approx 0.08947\text{ M}

    Molarity is defined as moles of solute per liter of solution (mol/L\text{mol/L}). You substituted the volume directly in milliliters (23.45 mL23.45\text{ mL}) instead of converting it to liters (0.02345 L0.02345\text{ L}).

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the complete and balanced molecular equation for the neutralization of KHP with NaOH.

You calculated the moles of KHP accurately from its mass and molar mass.

You recognized the 1:1 stoichiometric equivalence between KHP and NaOH.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omitted in molarity calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated molarity as moles divided by volume regardless of unit, omitting the required metric unit conversion from milliliters to liters (1 L=1000 mL1\text{ L} = 1000\text{ mL}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Definition of Molarity
  • Molarity (MM) strictly has units of mol/L\text{mol/L} or mmol/mL\text{mmol/mL}.

  • Always convert volume into liters before dividing moles, or convert moles to millimoles if keeping volume in milliliters.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert titrant volume from milliliters to liters: V=23.45 mL×1 L1000 mL=0.02345 LV = 23.45\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.02345\text{ L}.

  2. Divide moles by volume in liters: [NaOH]=0.0020982 mol0.02345 L=0.08947 M[\ce{NaOH}] = \frac{0.0020982\text{ mol}}{0.02345\text{ L}} = 0.08947\text{ M}.

Final answer

[NaOH]=0.08947 M[\ce{NaOH}] = 0.08947\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the units explicitly at each stage (e.g., mol/L\text{mol}/\text{L}) to confirm they simplify to molarity (MM).

  • Perform a quick order-of-magnitude check: standardized bench titrants are commonly between 0.05 M0.05\text{ M} and 1 M1\text{ M}; a value around 10−5 M10^{-5}\text{ M} should immediately signal a missing factor of 1000.

Lock it in

Similar question

01

A student dissolves 0.5106 g0.5106\,\text{g} of primary-standard KHP\text{KHP} (molar mass =204.22 g/mol= 204.22\,\text{g/mol}) in 40.0 mL40.0\,\text{mL} of water. Titration to a phenolphthalein end point requires 28.12 mL28.12\,\text{mL} of KOH(aq)\text{KOH}(aq). Calculate the molar concentration of the KOH\text{KOH} titrant.

Answer

[KOH]=0.08890 M[\text{KOH}] = 0.08890\,\text{M}. Key steps: nKHP=0.5106 g204.22 g/mol=2.5002×10−3 moln_{\text{KHP}} = \frac{0.5106\,\text{g}}{204.22\,\text{g/mol}} = 2.5002 \times 10^{-3}\,\text{mol}. Because KHP\text{KHP} is monoprotic, nKOH=nKHP=2.5002×10−3 moln_{\text{KOH}} = n_{\text{KHP}} = 2.5002 \times 10^{-3}\,\text{mol}. [KOH]=2.5002×10−3 mol0.02812 L≈0.08890 M[\text{KOH}] = \frac{2.5002 \times 10^{-3}\,\text{mol}}{0.02812\,\text{L}} \approx 0.08890\,\text{M}.

02

Oxalic acid dihydrate, H2C2O4⋅2H2O\text{H}_2\text{C}_2\text{O}_4 \cdot 2\text{H}_2\text{O} (molar mass =126.07 g/mol= 126.07\,\text{g/mol}), is a diprotic primary standard. If 0.1891 g0.1891\,\text{g} of oxalic acid dihydrate requires 24.80 mL24.80\,\text{mL} of an unknown NaOH(aq)\text{NaOH}(aq) solution for complete neutralization, write the balanced molecular equation and find [NaOH][\text{NaOH}].

Answer

Equation: H2C2O4(aq)+2NaOH(aq)→Na2C2O4(aq)+2H2O(l)\text{H}_2\text{C}_2\text{O}_4(aq) + 2\text{NaOH}(aq) \rightarrow \text{Na}_2\text{C}_2\text{O}_4(aq) + 2\text{H}_2\text{O}(l); [NaOH]=0.1210 M[\text{NaOH}] = 0.1210\,\text{M}. Key steps: nacid=0.1891 g126.07 g/mol=1.5000×10−3 moln_{\text{acid}} = \frac{0.1891\,\text{g}}{126.07\,\text{g/mol}} = 1.5000 \times 10^{-3}\,\text{mol}. Stoichiometric ratio is 1:21:2, so nNaOH=2×1.5000×10−3=3.0000×10−3 moln_{\text{NaOH}} = 2 \times 1.5000 \times 10^{-3} = 3.0000 \times 10^{-3}\,\text{mol}. [NaOH]=3.0000×10−3 mol0.02480 L≈0.1210 M[\text{NaOH}] = \frac{3.0000 \times 10^{-3}\,\text{mol}}{0.02480\,\text{L}} \approx 0.1210\,\text{M}.

03

A 0.3550 g0.3550\,\text{g} sample contains an unknown mixture of non-acidic inert sodium chloride and primary-standard KHP\text{KHP}. Titrating the sample requires 16.20 mL16.20\,\text{mL} of 0.09500 M NaOH0.09500\,\text{M }\text{NaOH} to reach the end point. Calculate the mass percent of KHP\text{KHP} in the original mixture.

Answer

88.54%88.54\%. Key steps: nNaOH=(0.01620 L)(0.09500 M)=1.539×10−3 moln_{\text{NaOH}} = (0.01620\,\text{L})(0.09500\,\text{M}) = 1.539 \times 10^{-3}\,\text{mol}. Since KHP:NaOH=1:1\text{KHP} : \text{NaOH} = 1:1, nKHP=1.539×10−3 moln_{\text{KHP}} = 1.539 \times 10^{-3}\,\text{mol}. Mass of KHP=(1.539×10−3 mol)(204.22 g/mol)=0.3143 g\text{KHP} = (1.539 \times 10^{-3}\,\text{mol})(204.22\,\text{g/mol}) = 0.3143\,\text{g}. Mass percent=0.3143 g0.3550 g×100%≈88.54%\text{Mass percent} = \frac{0.3143\,\text{g}}{0.3550\,\text{g}} \times 100\% \approx 88.54\%.

Loading workspace…