Resources

An industrial alloy sample of mass 250.0 g250.0\text{ g} contains 0.485 mol0.485\text{ mol} of a metalloid with atomic number Z=33Z = 33 and 1.860 mol1.860\text{ mol} of a transition metal with atomic number Z=29Z = 29. (a) Identify both elements by name and periodic table category. (b) Given atomic masses Mmetalloid=74.92 g/molM_{\text{metalloid}} = 74.92\text{ g/mol} and Mmetal=63.55 g/molM_{\text{metal}} = 63.55\text{ g/mol}, compute the mass percentage of the metalloid in the alloy to three significant figures.

Answer and steps

Final answer

(a) Arsenic (As\text{As}, metalloid) and Copper (Cu\text{Cu}, transition metal); (b) Mass percentage of As=14.5%\text{As} = 14.5\% (from 0.485 mol×74.92 g/mol250.0 g×100%=36.34 g250.0 g×100%\frac{0.485\text{ mol} \times 74.92\text{ g/mol}}{250.0\text{ g}} \times 100\% = \frac{36.34\text{ g}}{250.0\text{ g}} \times 100\%).

Steps

Part (a): Identifying the Elements and Their Periodic Categories

  1. Locate element with atomic number Z=33Z = 33:

    • The atomic number represents the number of protons in the nucleus and uniquely defines the element.
    • Element 3333 is arsenic (As\ce{As}), situated in Period 4, Group 15 (pp-block).
    • Along the periodic table staircase dividing metals and nonmetals, arsenic exhibits intermediate physical and chemical properties and is classified as a metalloid (or semimetal).
  2. Locate element with atomic number Z=29Z = 29:

    • Element 2929 is copper (Cu\ce{Cu}), situated in Period 4, Group 11 (dd-block).
    • As a member of the dd-block with partially filled or readily accessible dd-subshell electrons, it is classified as a transition metal.

Part (b): Calculating the Mass Percentage of the Metalloid

  1. Calculate the mass of the metalloid (As\ce{As}): Using the formula relating mass (mm), moles (nn), and molar mass (MM): mAs=nAs⋅MAsm_{\ce{As}} = n_{\ce{As}} \cdot M_{\ce{As}} mAs=0.485 mol⋅74.92 g/mol=36.3362 gm_{\ce{As}} = 0.485\text{ mol} \cdot 74.92\text{ g/mol} = 36.3362\text{ g}
  2. Calculate the mass percentage in the alloy: Divide the mass of arsenic by the total mass of the alloy sample (msample=250.0 gm_{\text{sample}} = 250.0\text{ g}) and multiply by 100%100\%: Mass % of As=mAsmsample⋅100%\text{Mass \% of As} = \frac{m_{\ce{As}}}{m_{\text{sample}}} \cdot 100\% Mass % of As=36.3362 g250.0 g⋅100%≈14.534%\text{Mass \% of As} = \frac{36.3362\text{ g}}{250.0\text{ g}} \cdot 100\% \approx 14.534\%
  3. Round to three significant figures:

    • The mole quantity 0.485 mol0.485\text{ mol} has three significant figures, which limits the final precision to three significant figures: Mass % of As=14.5%\text{Mass \% of As} = 14.5\%

(Common Pitfall: Do not sum the calculated masses of As\ce{As} and Cu\ce{Cu} to use as the denominator unless explicitly told the alloy consists solely of those two components; always use the given total sample mass of 250.0 g250.0\text{ g}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the percentage using the sum of the two component masses instead of the total sample mass given for the alloy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Z=33Z = 33: Arsenic, metalloid   ⟹  Z=29\implies Z = 29: Copper, transition metal

  2. Step 2

    m(As)=0.485 mol×74.92 g/mol=36.34 g  ⟹  m(Cu)=1.860 mol×[… ]=118.20 gm(\text{As}) = 0.485\text{ mol} \times 74.92\text{ g/mol} = 36.34\text{ g} \implies m(\text{Cu}) = 1.860\text{ mol} \times [\dots] = 118.20\text{ g}

  3. Step 3

    m(total)=36.34 g+118.20 g=154.54 gm(\text{total}) = 36.34\text{ g} + 118.20\text{ g} = 154.54\text{ g}

    Correct

    msample=250.0 gm_{\text{sample}} = 250.0\text{ g}

    The problem explicitly states that the total mass of the alloy sample is 250.0 g250.0\text{ g}. You should not sum the calculated component masses to find the denominator, as the sample may contain other unlisted elements or matrix material.

  4. Step 4

    Mass %\text{Mass \%} = (36.34 g\text{ g} / 154.54 g\text{ g}) ×\times 100% = 23.5%

    Correct

    Mass %\text{Mass \%} = 36.34 g250.0 g\frac{36.34\text{ g}}{250.0\text{ g}} ×\times 100% = 14.5%

    Your division and percentage calculation followed your incorrect total mass from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified both elements along with their periodic table categories.

You used the formula m=n⋅Mm = n \cdot M to find the mass of arsenic.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator Substitution Trap

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the alloy consisted solely of the two analyzed components and summed their masses, overlooking the explicitly provided total sample mass (250.0 g250.0\text{ g}) in the problem statement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Given Total vs. Component Sum
  • When a question gives an explicit total sample mass, use it as the denominator in mass percentage calculations unless told otherwise.

  • Check whether a total sample mass is directly specified in the prompt before attempting to reconstruct it by summing components.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the given total alloy mass: msample=250.0 gm_{\text{sample}} = 250.0\text{ g}.

  2. Compute the mass percentage: Mass %=36.34 g250.0 g×100%=14.536%\text{Mass \%} = \frac{36.34\text{ g}}{250.0\text{ g}} \times 100\% = 14.536\%.

  3. Round to three significant figures.

Final answer

(a) Arsenic (metalloid) and Copper (transition metal); (b) 14.5%14.5\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always re-read the opening sentence of composition problems to see if a whole-sample mass is already established.

  • Practice distinguishing between closed binary mixtures (where components sum to 100%100\%) and open samples analyzed for specific constituents.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the mole percentage of the metalloid instead of the required mass percentage.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Z=33:Arsenic, metalloid  ⟹  Z=29:Copper, transition metalZ = 33 : \text{Arsenic, metalloid} \implies Z = 29 : \text{Copper, transition metal}

  2. Step 2

    Total moles\text{Total moles} = 0.485 mol\text{ mol} + 1.860 mol\text{ mol} = 2.345 mol\text{ mol}   ⟹  \implies Percentage\text{Percentage} = (0.485 mol2.345 mol)\left(\frac{0.485\text{ mol}}{2.345\text{ mol}}\right) ×\times 100% = 20.7%

    Correct

    m_{As\ce{As}} = 0.485 mol\text{ mol} ×\times 74.92 g/mol\text{ g/mol} = 36.34 g\text{ g}   ⟹  \implies Mass %\text{Mass \%} = (36.34 g250.0 g)\left(\frac{36.34\text{ g}}{250.0\text{ g}}\right) ×\times 100% = 14.5%_

    You computed the mole fraction of arsenic instead of its mass percentage. To find the mass percentage, convert the moles of arsenic to grams using its molar mass (74.92 g/mol74.92\text{ g/mol}) and divide by the total alloy sample mass (250.0 g250.0\text{ g}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified element 33 as arsenic and classified it as a metalloid.

You correctly identified element 29 as copper and classified it as a transition metal.

You accurately summed the moles and performed the percentage calculation on the values you chose.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Quantity type mismatch (mole fraction vs. mass percentage)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused mole percentage (ratio of moles of one component to total moles) with mass percentage (ratio of mass of one component to total sample mass), omitting the conversion step using molar mass and ignoring the given total sample mass of 250.0 g250.0\text{ g}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Mass Percentage from Mole Percentage
  • Mass %=mcomponentmtotal×100%\text{Mass \%} = \frac{m_{\text{component}}}{m_{\text{total}}} \times 100\%, whereas Mole %=ncomponentntotal×100%\text{Mole \%} = \frac{n_{\text{component}}}{n_{\text{total}}} \times 100\%.

  • Always check the unit requested: when asked for mass percentage, convert moles to grams using molar mass (m=n×Mm = n \times M) before dividing by the total sample mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. mAs=0.485 mol×74.92 g/mol=36.3362 gm_{\ce{As}} = 0.485\text{ mol} \times 74.92\text{ g/mol} = 36.3362\text{ g}

  2. Mass % of As=(36.3362 g250.0 g)×100%=14.534%\text{Mass \% of As} = \left(\frac{36.3362\text{ g}}{250.0\text{ g}}\right) \times 100\% = 14.534\%

Final answer

14.5%14.5\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Check the wording of the prompt to see whether 'mass percent' or 'mole percent' is required.

  • When given a total sample mass (mtotal=250.0 gm_{\text{total}} = 250.0\text{ g}), use that directly in the denominator rather than summing mole quantities.

OverviewACEpath Teacher's Diagnosis

03 The student swaps the molar masses of the two elements when calculating the mass of the metalloid.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Z=33Z=33: Arsenic, metalloid   ⟹  Z=29\implies Z=29: Copper, transition metal

  2. Step 2

    m(metalloid)=0.485 mol×63.55 g/mol  ⟹  =30.82 gm(\text{metalloid}) = 0.485\text{ mol} \times 63.55\text{ g/mol} \implies = 30.82\text{ g}

    Correct

    m(metalloid)=0.485 mol×74.92 g/mol=36.34 gm(\text{metalloid}) = 0.485\text{ mol} \times 74.92\text{ g/mol} = 36.34\text{ g}

    You swapped the molar masses and multiplied the moles of the metalloid by 63.55 g/mol63.55\text{ g/mol} (the molar mass of the metal, Cu\text{Cu}) rather than 74.92 g/mol74.92\text{ g/mol} (the molar mass of the metalloid, As\text{As}).

  3. Step 3

    Mass %=(30.82 g250.0 g)×100%  ⟹  =12.3%\text{Mass } \% = \left(\frac{30.82\text{ g}}{250.0\text{ g}}\right) \times 100\% \implies = 12.3\%

    Correct

    Mass %=(36.34 g250.0 g)×100%=14.5%\text{Mass } \% = \left(\frac{36.34\text{ g}}{250.0\text{ g}}\right) \times 100\% = 14.5\%

    Your mass percentage formula, calculation, and rounding to three significant figures were carried out properly, but the result was affected by the incorrect mass from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified element 3333 as arsenic (a metalloid) and element 2929 as copper (a transition metal).

You correctly applied the relationship between moles, molar mass, and mass.

You used the correct alloy sample mass as the denominator and rounded to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Quantity or Constant Value Mismatch

You accidentally paired the moles of the metalloid with the molar mass of the transition metal (63.55 g/mol63.55\text{ g/mol}) instead of the metalloid (74.92 g/mol74.92\text{ g/mol}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When a problem provides data for multiple components simultaneously, it is easy to pick the wrong numerical constant if each value is not explicitly tagged with its chemical identity before calculation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Label Data by Chemical Species
  • In multi-component stoichiometry, always write variables with species subscripts (e.g., MAsM_{\text{As}} vs. MCuM_{\text{Cu}}).

  • Before calculating, explicitly write down nAs=0.485 moln_{\text{As}} = 0.485\text{ mol} and MAs=74.92 g/molM_{\text{As}} = 74.92\text{ g/mol} so you do not accidentally pull the constant for copper.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the mass of arsenic using its correct molar mass: mAs=0.485 mol×74.92 g/mol=36.3362 gm_{\text{As}} = 0.485\text{ mol} \times 74.92\text{ g/mol} = 36.3362\text{ g}.

  2. Substitute this mass into the mass percentage formula: Mass %=(36.3362 g250.0 g)×100%=14.534%\text{Mass } \% = \left(\frac{36.3362\text{ g}}{250.0\text{ g}}\right) \times 100\% = 14.534\%.

  3. Round to three significant figures: 14.5%14.5\%.

Final answer

(a) Arsenic (metalloid) and Copper (transition metal); (b) 14.5%14.5\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check numerical values against their assigned chemical names before multiplying.

  • Label all given quantities with explicit chemical formulas (mAsm_{\text{As}}, MAsM_{\text{As}}) rather than generic labels like 'metalloid'.

  • Practice multi-component alloy calculations to build vigilance against data-swapping errors.

Lock it in

Similar question

01

A 120.0 g120.0\text{ g} specimen of stainless steel is analyzed and found to contain 0.450 mol0.450\text{ mol} of chromium (M=52.00 g/molM = 52.00\text{ g/mol}) and 0.150 mol0.150\text{ mol} of nickel (M=58.69 g/molM = 58.69\text{ g/mol}). Calculate the mass percentage of chromium in the steel to three significant figures.

Answer

mCr=0.450 mol×52.00 g/mol=23.4 gm_{\ce{Cr}} = 0.450\text{ mol} \times 52.00\text{ g/mol} = 23.4\text{ g}. Divide by total sample mass: Mass %=23.4 g120.0 g×100%=19.5%\text{Mass \%} = \frac{23.4\text{ g}}{120.0\text{ g}} \times 100\% = 19.5\%.

02

An ore sample weighing 400.0 g400.0\text{ g} contains 1.20 mol1.20\text{ mol} of silicon (M=28.09 g/molM = 28.09\text{ g/mol}) and 0.500 mol0.500\text{ mol} of aluminum (M=26.98 g/molM = 26.98\text{ g/mol}). (a) Classify silicon and aluminum by periodic table category. (b) Find the combined mass percentage of these two elements in the ore to three significant figures.

Answer

(a) Silicon is a metalloid; aluminum is a post-transition (or poor) metal. (b) mSi=1.20×28.09=33.71 gm_{\ce{Si}} = 1.20 \times 28.09 = 33.71\text{ g}; mAl=0.500×26.98=13.49 gm_{\ce{Al}} = 0.500 \times 26.98 = 13.49\text{ g}. Total component mass =33.71+13.49=47.20 g= 33.71 + 13.49 = 47.20\text{ g}. Combined mass percentage =47.20 g400.0 g×100%=11.8%= \frac{47.20\text{ g}}{400.0\text{ g}} \times 100\% = 11.8\%.

03

A chemist analyzes a 15.00 g15.00\text{ g} sample of bronze known to be an alloy of only copper (M=63.55 g/molM = 63.55\text{ g/mol}) and tin (M=118.71 g/molM = 118.71\text{ g/mol}). If the sample contains 0.200 mol0.200\text{ mol} of copper, determine the moles of tin present in the sample.

Answer

mCu=0.200 mol×63.55 g/mol=12.71 gm_{\ce{Cu}} = 0.200\text{ mol} \times 63.55\text{ g/mol} = 12.71\text{ g}. Since it is a binary alloy, mSn=15.00 g−12.71 g=2.29 gm_{\ce{Sn}} = 15.00\text{ g} - 12.71\text{ g} = 2.29\text{ g}. Moles of tin: nSn=2.29 g118.71 g/mol=0.0193 moln_{\ce{Sn}} = \frac{2.29\text{ g}}{118.71\text{ g/mol}} = 0.0193\text{ mol}.

Loading workspace…