Resources
An unknown ionic solid consists of a main-group metal cation and a halogen anion . A sample containing of this compound has a total mass of . Elemental analysis confirms that the halogen constitutes of the total mass. Identify the metal and halogen, deduce the chemical formula, and state the systematic IUPAC name of the compound.
Answer and steps
Final answer
Calcium chloride ()
Steps
Determine the empirical formula from ion charges
An ionic compound is electrically neutral. The cation carries a charge () and the halogen anion carries a charge (). To balance the charges, two halide ions are required for every metal cation:
The chemical formula of the compound is .
Calculate the molar mass of the compound
The molar mass () is calculated using the sample's mass and the number of moles:
Identify the halogen ()
The halogen accounts for of the total molar mass:
Because there are two halogen atoms per formula unit ():
Comparing this atomic mass to the halogens in Group 17:
- Fluorine ():
- Chlorine ():
- Bromine ():
The halogen is chlorine ().
Identify the metal ()
Subtract the mass of the halogen from the total molar mass to find the atomic mass of the metal:
Comparing this atomic mass to the main-group elements in Group 2 (which form cations):
- Magnesium ():
- Calcium ():
- Strontium ():
Allowing for slight experimental rounding in mass percentage, the atomic mass closely matches calcium ().
State the chemical formula and IUPAC name
- Chemical formula:
- IUPAC systematic name: In ionic naming, the cation name is written first unchanged, followed by the anion name with the suffix -ide. Since calcium is a main-group metal with a fixed oxidation state of , Roman numerals are not used.
The compound is calcium chloride ().
Typical errors
01 The student omits dividing the total halogen mass by 2 to account for the two halogen atoms per formula unit, arriving at a molar mass of 71.14 g/mol that they mistakenly identify as bromine.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the charges are and , the empirical formula is . The represents the mass of two moles of halogen atoms, so you must divide by to obtain the atomic mass of a single halogen atom (, which is chlorine).
- Step 3
- Step 4Correct
Your ionic formula construction and IUPAC naming logic were applied correctly, but the final compound is incorrect because bromine was misidentified in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total molar mass of the unknown solid.
You correctly found the mass of the metal by subtracting the halogen contribution.
You correctly balanced the and charges to deduce the stoichiometry and named the resulting salt using IUPAC rules.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the total mass fraction of the halogen as belonging to a single halogen atom instead of dividing by the subscript from the empirical formula.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to connect the charge-balanced formula back to the molar mass breakdown: in one mole of , there are of atoms, so the total halogen mass must be divided by before matching with the periodic table.
REASONING PATH
Your ACEpath teacher’s suggested approach- Deduce the Formula Ratio First
An electrically neutral ionic compound formed from and has the formula .
Always write out the general chemical formula before calculating atomic masses from elemental mass percentages.
- Divide Component Mass by Subscript
Check whether the element has a subscript greater than in the formula unit before looking it up on the periodic table.
CORRECTED PATH
ACEpath Teacher's DemonstrationAccount for the two halide ions in the formula unit : .
Match this atomic mass to Group 17 on the periodic table: chlorine (, ).
Combine the metal cation and chloride anion to deduce the formula .
State the systematic IUPAC name for : calcium chloride.
Calcium chloride ()
02 The student mistakenly applies covalent molecular naming rules to an ionic compound by including the Greek multiplying prefix 'di-'.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4
- Step 5Correct
Binary ionic compounds composed of a main-group metal and a nonmetal do not use Greek numerical prefixes (such as "di-"). The subscripts are already fixed by charge balance, so the correct IUPAC name is simply "calcium chloride".
WHAT YOU DID WELL
Compliments from Your TeacherYou accurately determined the total molar mass and individual molar masses of both elements.
You correctly matched the atomic masses to calcium and chlorine.
You correctly balanced the ionic charges to establish the formula .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the Greek numerical prefix "di-" in an ionic compound's name.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the naming conventions of binary covalent (molecular) compounds with those of binary ionic compounds. Multiplying prefixes like mono-, di-, and tri- are used for covalent molecules, whereas simple binary ionic compounds are named simply as "[cation name] [anion name]-ide" without numerical prefixes.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Bonding Type Before Naming
Compounds formed between a metal and a nonmetal are ionic; compounds formed entirely between nonmetals are covalent molecular.
Inspect the constituent elements. Since calcium is a metal and chlorine is a nonmetal, apply ionic nomenclature.
- Rule Out Greek Prefixes for Ionic Compounds
Greek multiplying prefixes (mono-, di-, tri-, etc.) are never used for simple ionic compounds because the ion charges uniquely determine the ratio.
Name the metal directly, then modify the nonmetal stem with the suffix "-ide" without adding any prefix to indicate subscript counts.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the bonding type: is composed of a metal cation () and a nonmetal anion (), making it an ionic compound.
Apply the standard IUPAC binary ionic naming rule: name the cation unchanged ("calcium"), followed by the anion stem with "-ide" ("chloride").
Omit numerical prefixes because the fixed charges ( and ) uniquely dictate the ratio.
Calcium chloride
03 The student unnecessarily adds a Roman numeral oxidation state for a main-group metal with an invariant oxidation state.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4
- Step 5Correct
Calcium is a Group 2 alkaline earth metal with an invariant oxidation state of . Roman numerals (Stock notation) are used only for metals with variable oxidation states, so naming it calcium(II) chloride is non-standard.
WHAT YOU DID WELL
Compliments from Your TeacherYou calculated the molar mass of the unknown solid with complete accuracy.
You accounted for the two halide ions per formula unit when calculating the atomic mass of the halogen.
You correctly matched the atomic masses to calcium and chlorine.
You assembled the correct neutral chemical formula .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou knew the metal cation carries a charge and reflected that charge in parentheses, forgetting that Roman numerals are omitted for metals that exhibit only one stable oxidation state.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOvergeneralizing Stock system notation to all ionic compounds rather than restricting Roman numerals to metals with variable oxidation states (such as transition metals).
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Metal Position on the Periodic Table
Group 1 metals (), Group 2 metals (), silver (), zinc (), and aluminum () have fixed oxidation numbers in their ionic compounds.
Do not include Roman numerals in parentheses after the metal name if the metal has an invariant oxidation state.
- When to Use Roman Numerals
Roman numerals are reserved for transition metals and p-block metals (like , , , ) that form cations with multiple possible oxidation states.
Only insert a Roman numeral when the charge would otherwise be ambiguous.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the cation as calcium (), an alkaline earth metal in Group 2.
Recall that Group 2 elements only ever form cations in ionic compounds, making their oxidation state invariant and unambiguous.
State the cation name directly without parentheses or Roman numerals: calcium.
Combine with the anion name: calcium chloride.
Calcium chloride ()
Lock it in
If an unknown ionic compound contains and , what is its formula unit, and how many moles of are in of the compound?
The formula is , meaning there are of atoms per mole of compound.
Similar question
An ionic compound consists of an alkali metal cation and an oxide anion . A sample containing of this compound has a mass of . Identify the metal , deduce the formula, and name the compound.
Answer
The formula is . Total molar mass . Mass of . Since there are metal atoms, (Sodium, ). The compound is sodium oxide ().
A solid ionic compound is formed from an alkaline earth metal and a nonmetal . Elemental analysis reveals that the compound is metal by mass, and of the compound weighs . Identify and , write the formula, and state the IUPAC name.
Answer
The charge-balanced formula is . Total molar mass . Mass of metal per mole (Calcium, ). Mass of nonmetal per mole (no single element) or checking / : has molar mass ( metal). Checking : . For , metal is magnesium (, too low) or barium. Alternatively, () and (Gallium is a metal; if is arsenic with , or selenium). Thus is calcium arsenide.
An unknown salt decomposes completely to produce a main-group metal oxide . If of has a mass of , calculate the atomic mass of metal , identify the metal, and write the formula and systematic IUPAC name of the original nitrate salt.
Answer
Molar mass of . The mass of two nitrate ions . Atomic mass of metal , which corresponds to strontium (, ). The original salt is strontium nitrate, .