Resources
A standard galvanic cell is constructed under standard conditions (, ionic concentrations, pressure) using a copper electrode immersed in a solution and a zinc electrode immersed in a solution. The standard reduction potentials are given as: Identify the cathode and anode, write the balanced overall spontaneous cell reaction, and calculate the standard cell potential ().
Answer and steps
Final answer
Cathode: ; Anode: ; Overall spontaneous reaction: ; .
Steps
Identify the Cathode and Anode
In a galvanic cell, reduction occurs spontaneously at the electrode with the more positive standard reduction potential ().
Comparing the two standard reduction potentials:
Since , has a greater tendency to gain electrons (undergo reduction) than .
- Reduction occurs at the cathode: acts as the cathode.
- Oxidation occurs at the anode: acts as the anode, where zinc metal loses electrons.
Write the Half-Reactions and the Overall Spontaneous Reaction
- Cathode (reduction):
- Anode (oxidation): Reverse the given reduction half-reaction for zinc:
Adding the two half-reactions cancels the on both sides, yielding the overall balanced equation:
Calculate the Standard Cell Potential ()
Using the standard reduction potentials of the cathode and anode:
Substitute the given values:
(Common Pitfall: Do not change the sign of before plugging it into the formula , as the subtraction already accounts for the reversal of the half-reaction.)
Typical errors
01 The student reverses the cathode and anode based on the misconception that the more negative reduction potential acts as the cathode.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Cathode: , Anode:
CorrectCathode: , Anode:
Reduction occurs at the cathode, and the half-cell with the more positive reduction potential () undergoes reduction more readily. Therefore, is the cathode and is the anode.
- Step 2Correct
You correctly combined your assigned oxidation and reduction half-reactions, but because the electrode assignments were reversed, this represents the non-spontaneous reverse reaction.
- Step 3Correct
You correctly applied the standard cell potential formula to your assigned values, but the negative result signals a non-spontaneous process rather than a galvanic cell.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and applied the relationship .
You balanced the transfer of two electrons cleanly when combining the half-reactions.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou originally considered as the cathode before crossing it out and switching to , which led to a negative cell potential.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou selected the more negative standard reduction potential for the cathode instead of the more positive one, forgetting that higher (more positive) values indicate a greater thermodynamic tendency to gain electrons (undergo reduction).
REASONING PATH
Your ACEpath teacher’s suggested approach- Cathode vs. Anode Selection
In a spontaneous galvanic cell, the half-cell with the algebraically larger (more positive) undergoes reduction at the cathode.
Compare reduction potentials directly: since , assign to the cathode and to the anode.
- Galvanic Spontaneity Check
A galvanic cell must produce a positive standard cell potential ().
Whenever your calculated is negative, check immediately whether you swapped the cathode and anode.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompare standard reduction potentials: and .
Because , is reduced at the cathode, and is oxidized at the anode.
Write the cathode reduction: .
Write the anode oxidation: .
Add the two half-reactions: .
Calculate standard cell potential: .
Cathode: ; Anode: ; Overall spontaneous reaction: ;
02 The student reverses the sign of the anode potential to represent oxidation and then subtracts it in the cell potential formula, inadvertently double-counting the sign inversion.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
In the standard formula , both values must be standard reduction potentials. By flipping the sign of zinc's potential to and then subtracting it, you reversed the sign twice. A galvanic cell must also have a positive standard cell potential ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified copper as the cathode and zinc as the anode using standard reduction potentials.
You wrote the correct balanced overall spontaneous redox reaction.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou changed the sign of the anode potential and also subtracted it in the cell potential formula.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating two valid conventions for calculating : the difference formula using tabulated reduction potentials () versus the additive half-cell formula ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Choose One Cell Potential Convention
Use either with unchanged table values, OR by inverting the anode sign.
Do not invert the sign of the anode potential if you are already using the subtraction formula.
- Sanity Check Galvanic Cells
Every spontaneous galvanic cell has .
If your calculated standard cell potential is negative for a galvanic cell, check immediately for a reversed electrode assignment or an extra sign flip.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify both reduction potentials directly from the table: and .
Substitute both reduction potentials into the difference formula: .
Simplify the arithmetic: .
03 The student adds standard reduction potentials directly without changing the sign of the oxidation half-reaction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You directly added two reduction potentials together. In a galvanic cell, oxidation occurs at the anode, so you must either use or reverse the sign of the anode potential () when adding.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly compared standard reduction potentials to assign the cathode and anode.
You accurately combined the oxidation and reduction half-reactions to produce the balanced overall equation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up by adding the tabulated reduction potentials directly rather than subtracting the anode potential from the cathode potential.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated adding half-reactions with directly adding standard reduction potentials, forgetting that reduction potentials are tabulated for reduction only and must be subtracted for the species undergoing oxidation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Standard Cell Potential Formula
When using tabulated standard reduction potentials (), the formula is .
Keep both values as standard reduction potentials and subtract the anode value from the cathode value.
- Spontaneous Galvanic Cell Check
A standard galvanic cell must have a positive standard cell potential ().
Whenever you calculate for a spontaneous galvanic cell, verify that your final result is positive.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall the standard cell potential equation: .
Substitute the given reduction potentials: and .
Evaluate the arithmetic: .
Lock it in
In a galvanic cell, which electrode has the more positive standard reduction potential ()?
The cathode. Reduction occurs at the cathode, and species with more positive values have a stronger driving force to gain electrons.
Similar question
A standard galvanic cell is formed using the following half-cells: Identify the cathode and calculate .
Answer
Cathode: ; . Since , silver undergoes reduction at the cathode: .
A standard galvanic cell utilizes nickel and magnesium electrodes with standard reduction potentials: Write the balanced spontaneous overall cell equation and determine .
Answer
Overall equation: ; . Nickel has the more positive potential () and acts as the cathode, while magnesium is oxidized at the anode: .
Consider three standard half-reactions:
- Select the two half-cells that will produce the maximum possible standard cell voltage in a galvanic cell, write the balanced overall reaction, and calculate .
Answer
Selected half-cells: (cathode) and (anode). Balanced overall equation: ; . Maximum voltage is obtained by pairing the most positive potential with the most negative potential: .