Resources

When solid copper(II) carbonate, CuCO3 (s)\text{CuCO}_3\,(\text{s}), is treated with aqueous hydrochloric acid, HCl (aq)\text{HCl}\,(\text{aq}), an acid-base neutralization coupled with gas evolution occurs, dissolving the solid. (a) Write the balanced net ionic equation for this coupled process. (b) If 3.705 g3.705\text{ g} of CuCO3 (s)\text{CuCO}_3\,(\text{s}) (molar mass =123.55 g/mol= 123.55\text{ g/mol}) is completely consumed by 0.500 M HCl (aq)0.500\text{ M}\ \text{HCl}\,(\text{aq}), calculate the minimum volume in milliliters of HCl (aq)\text{HCl}\,(\text{aq}) required and the volume of dry CO2 (g)\text{CO}_2\,(\text{g}) produced at standard temperature and pressure (273.15 K273.15\text{ K}, 1.000 atm1.000\text{ atm}, molar volume =22.414 L/mol= 22.414\text{ L/mol}).

Answer and steps

Final answer

(a) CuCO3 (s)+2H+ (aq)→Cu2+ (aq)+CO2 (g)+H2O (l)\text{CuCO}_3\,(\text{s}) + 2\text{H}^+\,(\text{aq}) \rightarrow \text{Cu}^{2+}\,(\text{aq}) + \text{CO}_2\,(\text{g}) + \text{H}_2\text{O}\,(\text{l}); (b) Minimum volume of HCl=120. mL\text{HCl} = 120.\text{ mL}; Volume of CO2 (g)=0.672 L\text{CO}_2\,(\text{g}) = 0.672\text{ L}.

Steps

Part (a): Writing the Net Ionic Equation

  1. Write the balanced molecular equation: When solid copper(II) carbonate reacts with aqueous hydrochloric acid, it undergoes an acid-base neutralization coupled with the decomposition of unstable carbonic acid (HX2COX3\ce{H2CO3}) into carbon dioxide gas and liquid water: CuCOX3(s)+2 HCl(aq)→CuClX2(aq)+COX2(g)+HX2O(l)\ce{CuCO3(s) + 2HCl(aq) -> CuCl2(aq) + CO2(g) + H2O(l)}
  2. Write the complete ionic equation: Dissociate all strong electrolytes in aqueous solution into their constituent ions. Insoluble solids, pure liquids, and gases remain in their un-ionized or molecular forms:

    • CuCOX3(s)\ce{CuCO3(s)} is an insoluble solid and stays intact.
    • HCl(aq)\ce{HCl(aq)} is a strong acid: 2HCl(aq)→2HX+(aq)+2ClX−(aq)2\ce{HCl(aq)} \rightarrow 2\ce{H+(aq)} + 2\ce{Cl-(aq)}.
    • CuClX2(aq)\ce{CuCl2(aq)} is a soluble ionic compound: CuClX2(aq)→CuX2+(aq)+2ClX−(aq)\ce{CuCl2(aq)} \rightarrow \ce{Cu^2+(aq)} + 2\ce{Cl-(aq)}.
    • COX2(g)\ce{CO2(g)} and HX2O(l)\ce{H2O(l)} remain molecular.

    CuCOX3(s)+2 HX+(aq)+2 ClX−(aq)→CuX2+(aq)+2 ClX−(aq)+COX2(g)+HX2O(l)\ce{CuCO3(s) + 2H+(aq) + 2Cl-(aq) -> Cu^2+(aq) + 2Cl-(aq) + CO2(g) + H2O(l)}

  3. Cancel spectator ions: The chloride ion (ClX−\ce{Cl-}) appears identically on both sides of the equation. Eliminating it yields the balanced net ionic equation: CuCOX3(s)+2 HX+(aq)→CuX2+(aq)+COX2(g)+HX2O(l)\ce{CuCO3(s) + 2H+(aq) -> Cu^2+(aq) + CO2(g) + H2O(l)}

Common Pitfall: Do not dissociate CuCOX3(s)\ce{CuCO3(s)} into free ions on the reactant side. Only soluble strong electrolytes in aqueous solution (aq\text{aq}) are separated into ions.


Part (b): Stoichiometric Calculations

  1. Calculate the amount of CuCOX3(s)\ce{CuCO3(s)} consumed: Using its molar mass (M=123.55 g/molM = 123.55\text{ g/mol}): n(CuCOX3)=mM=3.705 g123.55 g/mol≈0.029988 mol≈0.0300 moln(\ce{CuCO3}) = \frac{m}{M} = \frac{3.705\text{ g}}{123.55\text{ g/mol}} \approx 0.029988\text{ mol} \approx 0.0300\text{ mol}
  2. Calculate the minimum volume of HCl(aq)\ce{HCl(aq)} required: From the balanced equation, 1 mol1\text{ mol} of CuCOX3\ce{CuCO3} requires 2 mol2\text{ mol} of HCl\ce{HCl}: n(HCl)=2⋅n(CuCOX3)=2⋅0.029988 mol=0.05998 moln(\ce{HCl}) = 2 \cdot n(\ce{CuCO3}) = 2 \cdot 0.029988\text{ mol} = 0.05998\text{ mol}

    Using the molarity (C=0.500 MC = 0.500\text{ M}): V(HCl)=n(HCl)C=0.05998 mol0.500 mol/L=0.120 L=120. mLV(\ce{HCl}) = \frac{n(\ce{HCl})}{C} = \frac{0.05998\text{ mol}}{0.500\text{ mol/L}} = 0.120\text{ L} = 120.\text{ mL}

  3. Calculate the volume of dry COX2(g)\ce{CO2(g)} produced at STP: From the balanced equation, the mole ratio between CuCOX3\ce{CuCO3} and COX2\ce{CO2} is 1:11:1: n(COX2)=n(CuCOX3)=0.029988 moln(\ce{CO2}) = n(\ce{CuCO3}) = 0.029988\text{ mol}

    Using the standard molar volume at STP (Vm=22.414 L/molV_{\text{m}} = 22.414\text{ L/mol}): V(COX2)=n(COX2)⋅Vm=0.029988 mol⋅22.414 L/mol≈0.672 LV(\ce{CO2}) = n(\ce{CO2}) \cdot V_{\text{m}} = 0.029988\text{ mol} \cdot 22.414\text{ L/mol} \approx 0.672\text{ L}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the 2:1 stoichiometry between HCl and CuCO3, assuming an equimolar 1:1 reaction ratio and calculating only half the required acid volume.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    CuCOX3(s)+2 HX+(aq)→CuX2+(aq)+HX2O(l)+COX2(g)\ce{CuCO3(s) + 2H+(aq) -> Cu^2+(aq) + H2O(l) + CO2(g)}

  2. Step 2

    n(CuCOX3)=3.705 g123.55 g/mol=0.0300 moln(\ce{CuCO3}) = \frac{3.705\text{ g}}{123.55\text{ g/mol}} = 0.0300\text{ mol}

  3. Step 3

    n(HCl)=n(CuCOX3)=0.0300 mol  ⟹  V(HCl)=0.0300 mol0.500 M=0.060 L=60 mLn(\ce{HCl}) = n(\ce{CuCO3}) = 0.0300\text{ mol} \implies V(\ce{HCl}) = \frac{0.0300\text{ mol}}{0.500\text{ M}} = 0.060\text{ L} = 60\text{ mL}

    Correct

    n(HCl)=2×n(CuCOX3)=0.0600 mol  ⟹  V(HCl)=0.0600 mol0.500 M=0.120 L=120. mLn(\ce{HCl}) = 2 \times n(\ce{CuCO3}) = 0.0600\text{ mol} \implies V(\ce{HCl}) = \frac{0.0600\text{ mol}}{0.500\text{ M}} = 0.120\text{ L} = 120.\text{ mL}

    You equated the moles of HCl\ce{HCl} directly to the moles of CuCOX3\ce{CuCO3}. According to the balanced equation, 1 mol1\text{ mol} of CuCOX3\ce{CuCO3} requires 2 mol2\text{ mol} of HX+\ce{H+} (from HCl\ce{HCl}), so n(HCl)=2×0.0300 mol=0.0600 moln(\ce{HCl}) = 2 \times 0.0300\text{ mol} = 0.0600\text{ mol}, yielding 120. mL120.\text{ mL}.

  4. Step 4

    n(COX2)=0.0300 mol  ⟹  V(COX2)=0.0300 mol×22.414 L/mol=0.672 Ln(\ce{CO2}) = 0.0300\text{ mol} \implies V(\ce{CO2}) = 0.0300\text{ mol} \times 22.414\text{ L/mol} = 0.672\text{ L}

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the completely balanced net ionic equation with accurate stoichiometric coefficients.

You correctly converted the solid mass to moles using molar mass.

You correctly used standard molar volume at STP to compute the volume of dry gas evolved.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Mole Ratio Omission

You set n(HCl)=n(CuCOX3)n(\ce{HCl}) = n(\ce{CuCO3}) even though your own balanced net ionic equation clearly shows a coefficient of 22 for HX+\ce{H+}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the stoichiometric coefficients from the balanced reaction when transferring values into aqueous solution molarity calculations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometric Coefficient Check
  • For any reactant or product BB related to AA by aA+bB→…aA + bB \rightarrow \dots, the mole relationship is n(B)=ban(A)n(B) = \frac{b}{a} n(A).

  • Always explicitly multiply by the stoichiometric ratio coefficient of unknowncoefficient of known\frac{\text{coefficient of unknown}}{\text{coefficient of known}} before calculating solution volume or concentration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. From the balanced equation, determine the mole ratio: n(HCl)n(CuCOX3)=21\frac{n(\ce{HCl})}{n(\ce{CuCO3})} = \frac{2}{1}.

  2. Calculate the moles of HCl\ce{HCl} required: n(HCl)=2×0.0300 mol=0.0600 moln(\ce{HCl}) = 2 \times 0.0300\text{ mol} = 0.0600\text{ mol}.

  3. Calculate the required volume in milliliters: V(HCl)=0.0600 mol0.500 mol/L=0.120 L=120. mLV(\ce{HCl}) = \frac{0.0600\text{ mol}}{0.500\text{ mol/L}} = 0.120\text{ L} = 120.\text{ mL}.

Final answer

(a) CuCOX3(s)+2 HX+(aq)→CuX2+(aq)+COX2(g)+HX2O(l)\ce{CuCO3(s) + 2H+(aq) -> Cu^2+(aq) + CO2(g) + H2O(l)}; (b) Minimum volume of HCl=120. mL\ce{HCl} = 120.\text{ mL}; Volume of COX2=0.672 L\ce{CO2} = 0.672\text{ L}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the mole ratio from your balanced equation is explicitly included in your dimensional analysis or mole calculations.

  • Practice stoichiometry problems involving monoprotic vs. diprotic acids reacting with divalent metal carbonates.

OverviewACEpath Teacher's Diagnosis

02 The student dissociates the insoluble solid reactant into aqueous ions in the net ionic equation, incorrectly writing Cu2+ and CO3^2- on the reactant side.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    CO32− (aq)+2H+ (aq)→H2O (l)+CO2 (g)\text{CO}_3^{2-}\,(\text{aq}) + 2\text{H}^+\,(\text{aq}) \rightarrow \text{H}_2\text{O}\,(\text{l}) + \text{CO}_2\,(\text{g})

    Correct

    CuCO3 (s)+2H+ (aq)→Cu2+ (aq)+CO2 (g)+H2O (l)\text{CuCO}_3\,(\text{s}) + 2\text{H}^+\,(\text{aq}) \rightarrow \text{Cu}^{2+}\,(\text{aq}) + \text{CO}_2\,(\text{g}) + \text{H}_2\text{O}\,(\text{l})

    Copper(II) carbonate is an insoluble solid denoted as CuCO3 (s)\text{CuCO}_3\,(\text{s}). In net ionic equations, insoluble solids, pure liquids, and gases must remain in their intact molecular or formula unit forms. Because Cu2+\text{Cu}^{2+} changes state from a solid lattice to dissolved aqueous ions (Cu2+ (aq)\text{Cu}^{2+}\,(\text{aq})), it participates directly in the reaction and is not a spectator ion.

  2. Step 2

    n(CuCO3)=3.705 g123.55 g/mol=0.0300 mol  ⟹  n(HCl)=2×0.0300 mol=0.0600 mol  ⟹  V(HCl)=0.0600 mol0.500 M=0.120 L=120 mLn(\text{CuCO}_3) = \frac{3.705\text{ g}}{123.55\text{ g/mol}} = 0.0300\text{ mol} \implies n(\text{HCl}) = 2 \times 0.0300\text{ mol} = 0.0600\text{ mol} \implies V(\text{HCl}) = \frac{0.0600\text{ mol}}{0.500\text{ M}} = 0.120\text{ L} = 120\text{ mL}

  3. Step 3

    n(CO2)=0.0300 mol  ⟹  V(CO2)=0.0300 mol×22.414 L/mol=0.672 Ln(\text{CO}_2) = 0.0300\text{ mol} \implies V(\text{CO}_2) = 0.0300\text{ mol} \times 22.414\text{ L/mol} = 0.672\text{ L}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the molar amounts and stoichiometric mole ratios for both reactants and products.

You correctly determined the minimum required volume of hydrochloric acid solution.

You correctly applied the ideal gas molar volume at STP to compute the volume of carbon dioxide produced.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dissociating Insoluble Solid in Net Ionic Equation

No, this is a conceptual misunderstanding regarding which chemical species dissociate in net ionic equations.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that all ionic compounds dissociate into separated aqueous ions in ionic equations, treating CuCO3 (s)\text{CuCO}_3\,(\text{s}) as dissolved CO32−\text{CO}_3^{2-} and canceling Cu2+\text{Cu}^{2+} as a spectator ion. Only soluble strong electrolytes in aqueous solution ((aq)(\text{aq})) are written as dissociated ions; insoluble solids ((s)(\text{s})) must remain intact.

REASONING PATH
Your ACEpath teacher’s suggested approach
Phase Check for Dissociation
  • Only soluble strong electrolytes (soluble salts, strong acids, strong bases) written with (aq)(\text{aq}) dissociate into separate ions.

  • Check solubility rules before dissociating an ionic compound. If it is labeled (s)(\text{s}), write it as an intact formula unit.

Spectator Ion Verification
  • An ion is a spectator only if its physical state and chemical environment are identical on both reactant and product sides.

  • Compare Cu2+\text{Cu}^{2+} in the reactant solid lattice CuCO3 (s)\text{CuCO}_3\,(\text{s}) versus aqueous Cu2+ (aq)\text{Cu}^{2+}\,(\text{aq}) in the products; because its phase and bonding change, it must appear in the net ionic equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete formula of insoluble copper(II) carbonate as CuCO3 (s)\text{CuCO}_3\,(\text{s}) on the reactant side.

  2. Represent the strong acid as dissociated hydronium/hydrogen ions, 2H+ (aq)2\text{H}^+\,(\text{aq}).

  3. Write the products showing dissolved copper(II) ions, gas evolution, and liquid water: Cu2+ (aq)+CO2 (g)+H2O (l)\text{Cu}^{2+}\,(\text{aq}) + \text{CO}_2\,(\text{g}) + \text{H}_2\text{O}\,(\text{l}).

  4. Verify that mass and charge are both balanced (+2+2 on each side).

Final answer

(a) CuCO3 (s)+2H+ (aq)→Cu2+ (aq)+CO2 (g)+H2O (l)\text{CuCO}_3\,(\text{s}) + 2\text{H}^+\,(\text{aq}) \rightarrow \text{Cu}^{2+}\,(\text{aq}) + \text{CO}_2\,(\text{g}) + \text{H}_2\text{O}\,(\text{l}); (b) Minimum volume of HCl=120 mL\text{HCl} = 120\text{ mL}; Volume of CO2 (g)=0.672 L\text{CO}_2\,(\text{g}) = 0.672\text{ L}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the solubility rules to quickly classify salts as soluble aqueous species or insoluble solids.

  • Practice writing complete and net ionic equations for reactions involving solid carbonates, hydroxides, and sulfides reacting with strong acids.

OverviewACEpath Teacher's Diagnosis

03 The student misapplies the 2:1 stoichiometric ratio between HCl and CuCO3 by dividing moles of CuCO3 by 2 instead of multiplying.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    CuCO3 (s)+2H+ (aq)→Cu2+ (aq)+H2O (l)+CO2 (g)\text{CuCO}_3\,(\text{s}) + 2\text{H}^+\,(\text{aq}) \rightarrow \text{Cu}^{2+}\,(\text{aq}) + \text{H}_2\text{O}\,(\text{l}) + \text{CO}_2\,(\text{g})

  2. Step 2

    n(CuCO3)=3.705 g123.55 g/mol=0.0300 moln(\text{CuCO}_3) = \frac{3.705\text{ g}}{123.55\text{ g/mol}} = 0.0300\text{ mol}

  3. Step 3

    n(HCl)=0.0300 mol2=0.0150 moln(\text{HCl}) = \frac{0.0300\text{ mol}}{2} = 0.0150\text{ mol}

    Correct

    n(HCl)=0.0300 mol×2 mol HCl1 mol CuCO3=0.0600 moln(\text{HCl}) = 0.0300\text{ mol} \times \frac{2\text{ mol HCl}}{1\text{ mol CuCO}_3} = 0.0600\text{ mol}

    According to the balanced equation, 1 mol1\text{ mol} of CuCO3\text{CuCO}_3 consumes 2 mol2\text{ mol} of H+\text{H}^+ (from HCl\text{HCl}). You need to multiply the moles of CuCO3\text{CuCO}_3 by 22, not divide by 22.

  4. Step 4

    V(HCl)=0.0150 mol0.500 M=0.030 L=30 mLV(\text{HCl}) = \frac{0.0150\text{ mol}}{0.500\text{ M}} = 0.030\text{ L} = 30\text{ mL}

    Correct

    V(HCl)=0.0600 mol0.500 mol/L=0.120 L=120. mLV(\text{HCl}) = \frac{0.0600\text{ mol}}{0.500\text{ mol/L}} = 0.120\text{ L} = 120.\text{ mL}

    Your formula V=nMV = \frac{n}{M} is set up properly, but the numerical result is halved due to the mole value carried over from Step 3.

  5. Step 5

    n(CO2)=0.0300 mol  ⟹  V(CO2)=0.0300 mol×22.414 L/mol=0.672 Ln(\text{CO}_2) = 0.0300\text{ mol} \implies V(\text{CO}_2) = 0.0300\text{ mol} \times 22.414\text{ L/mol} = 0.672\text{ L}

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the complete, properly balanced net ionic equation showing the dissolution and gas evolution.

You accurately calculated the amount of CuCO3\text{CuCO}_3 using its molar mass.

You correctly determined the volume of dry CO2\text{CO}_2 gas produced at STP using the standard molar volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Ratio Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the mole ratio conversion factor, dividing by the stoichiometric coefficient of the target reactant (extHCl ext{HCl}) rather than multiplying by the ratio 2 mol HCl1 mol CuCO3\frac{2\text{ mol HCl}}{1\text{ mol CuCO}_3}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis with Mole Ratios
  • moles of unknown=moles of given×coefficient of unknowncoefficient of given\text{moles of unknown} = \text{moles of given} \times \frac{\text{coefficient of unknown}}{\text{coefficient of given}}

  • Always write out the units explicitly, such as mol CuCO3×2 mol HCl1 mol CuCO3\text{mol CuCO}_3 \times \frac{2\text{ mol HCl}}{1\text{ mol CuCO}_3}, to ensure the given unit cancels out and the target coefficient stays in the numerator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. n(HCl)=0.0300 mol CuCO3×2 mol HCl1 mol CuCO3=0.0600 moln(\text{HCl}) = 0.0300\text{ mol CuCO}_3 \times \frac{2\text{ mol HCl}}{1\text{ mol CuCO}_3} = 0.0600\text{ mol}

  2. V(HCl)=n(HCl)C(HCl)=0.0600 mol0.500 mol/L=0.120 L=120. mLV(\text{HCl}) = \frac{n(\text{HCl})}{C(\text{HCl})} = \frac{0.0600\text{ mol}}{0.500\text{ mol/L}} = 0.120\text{ L} = 120.\text{ mL}

Final answer

(a) CuCO3 (s)+2H+ (aq)→Cu2+ (aq)+CO2 (g)+H2O (l)\text{CuCO}_3\,(\text{s}) + 2\text{H}^+\,(\text{aq}) \rightarrow \text{Cu}^{2+}\,(\text{aq}) + \text{CO}_2\,(\text{g}) + \text{H}_2\text{O}\,(\text{l}); (b) Minimum volume of HCl=120. mL\text{HCl} = 120.\text{ mL}; Volume of CO2 (g)=0.672 L\text{CO}_2\,(\text{g}) = 0.672\text{ L}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out dimensional analysis units for every mole-ratio conversion to prevent accidentally dividing instead of multiplying.

  • Double-check that the calculated volume of reactant makes chemical sense relative to its stoichiometric coefficient: a species with coefficient 22 requires twice as many moles as one with coefficient 11.

Lock it in

Similar question

01

Calculate the volume in milliliters of 0.250 M HNOX3(aq)0.250\text{ M } \ce{HNO3(aq)} required to completely react with 1.68 g1.68\text{ g} of solid magnesium carbonate, MgCOX3(s)\ce{MgCO3(s)} (molar mass =84.31 g/mol= 84.31\text{ g/mol}).

Answer

159 mL159\text{ mL}. Moles of MgCOX3=1.68 g84.31 g/mol≈0.01993 mol\ce{MgCO3} = \frac{1.68\text{ g}}{84.31\text{ g/mol}} \approx 0.01993\text{ mol}. From the balanced equation MgCOX3(s)+2 HX+(aq)→MgX2+(aq)+COX2(g)+HX2O(l)\ce{MgCO3(s) + 2H+(aq) -> Mg^2+(aq) + CO2(g) + H2O(l)}, n(HNOX3)=2×0.01993 mol≈0.03985 moln(\ce{HNO3}) = 2 \times 0.01993\text{ mol} \approx 0.03985\text{ mol}. Volume V=0.03985 mol0.250 M≈0.1594 L=159 mLV = \frac{0.03985\text{ mol}}{0.250\text{ M}} \approx 0.1594\text{ L} = 159\text{ mL}.

02

A 2.50 g2.50\text{ g} sample of solid barium carbonate, BaCOX3(s)\ce{BaCO3(s)} (molar mass =197.34 g/mol= 197.34\text{ g/mol}), is dissolved in excess 1.20 M HCl(aq)1.20\text{ M } \ce{HCl(aq)}. Determine the volume of dry COX2(g)\ce{CO2(g)} generated at STP (22.414 L/mol22.414\text{ L/mol}) and the minimum volume of the acid in milliliters needed for complete reaction.

Answer

0.284 L COX20.284\text{ L } \ce{CO2} and 21.1 mL HCl21.1\text{ mL } \ce{HCl}. Moles of BaCOX3=2.50 g197.34 g/mol=0.01267 mol\ce{BaCO3} = \frac{2.50\text{ g}}{197.34\text{ g/mol}} = 0.01267\text{ mol}. V(COX2)=0.01267 mol×22.414 L/mol≈0.284 LV(\ce{CO2}) = 0.01267\text{ mol} \times 22.414\text{ L/mol} \approx 0.284\text{ L}. Moles of HCl=2×0.01267 mol=0.02534 mol\ce{HCl} = 2 \times 0.01267\text{ mol} = 0.02534\text{ mol}; V(HCl)=0.02534 mol1.20 M≈0.0211 L=21.1 mLV(\ce{HCl}) = \frac{0.02534\text{ mol}}{1.20\text{ M}} \approx 0.0211\text{ L} = 21.1\text{ mL}.

03

Solid iron(III) carbonate, FeX2(COX3)X3(s)\ce{Fe2(CO3)3(s)}, is dissolved completely by 0.400 M HCl(aq)0.400\text{ M } \ce{HCl(aq)}. Write the balanced net ionic equation, and determine the volume in milliliters of 0.400 M HCl0.400\text{ M } \ce{HCl} required to react with 0.0150 mol0.0150\text{ mol} of FeX2(COX3)X3(s)\ce{Fe2(CO3)3(s)}.

Answer

Net ionic equation: FeX2(COX3)X3(s)+6 HX+(aq)→2 FeX3+(aq)+3 COX2(g)+3 HX2O(l)\ce{Fe2(CO3)3(s) + 6H+(aq) -> 2Fe^3+(aq) + 3CO2(g) + 3H2O(l)}. Volume of HCl=225 mL\ce{HCl} = 225\text{ mL}. Stoichiometry requires 6 mol HX+6\text{ mol } \ce{H+} per 1 mol FeX2(COX3)X31\text{ mol } \ce{Fe2(CO3)3}. Moles of HCl=6×0.0150 mol=0.0900 mol\ce{HCl} = 6 \times 0.0150\text{ mol} = 0.0900\text{ mol}. Volume V=0.0900 mol0.400 M=0.225 L=225 mLV = \frac{0.0900\text{ mol}}{0.400\text{ M}} = 0.225\text{ L} = 225\text{ mL}.

Loading workspace…