Resources
Consider the electrolysis of an aqueous solution containing and . Under standard reduction potentials, and . (a) Identify which species is thermodynamically favored to be reduced at the cathode. (b) If a student runs the electrolysis at a high cell voltage with a current of for , but experimentally recovers only of (molar mass ), determine the cathodic current efficiency with respect to copper deposition and identify the competing reduction reaction responsible for the lower yield. Use .
Answer and steps
Final answer
(a) is thermodynamically favored to be reduced because it has the more positive reduction potential ( vs. ). (b) Current efficiency is ; the competing cathode reaction is the reduction of to ().
Steps
Calculate the Total Electrical Charge Passed ()
Part (a): Determining the Thermodynamically Favored Cathodic Reaction
At the cathode of an electrolytic cell, reduction (the gain of electrons) takes place. When multiple reducible cations or species are present in an aqueous solution, the species with the more positive (higher) reduction potential is thermodynamically favored to be reduced first because it has a greater affinity for electrons. The two competing reduction half-reactions are: Because , is thermodynamically favored to be reduced at the cathode.
Part (b): Calculating Current Efficiency and Identifying the Competing Reaction
Using the relationship between current () and time ():
Calculate the Theoretical Mass of Copper Deposited ()
From Faraday's law of electrolysis, the mass of a substance produced by charge is: where:
- (molar mass of )
- (moles of electrons required per mole of reduced)
Substitute the values:
Determine the Cathodic Current Efficiency
Current efficiency is the ratio of the actual mass (or charge used to form the product) to the theoretical mass (or total charge supplied):
Identify the Competing Reduction Reaction
The current efficiency is less than because part of the electrical current is consumed by a side reaction. In an acidic aqueous solution (), when high cell voltage is applied (causing significant overpotential or localized depletion of near the cathode surface), ions also accept electrons to form hydrogen gas: This evolution of at the cathode accounts for the remaining of the electrical charge, directly reducing the copper recovery.
Typical errors
01 The student forgets that reducing Cu²⁺ to Cu requires two electrons per atom, assuming a 1:1 electron stoichiometry.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Reducing each ion to metallic requires electrons (). You assumed a ratio (), which led to twice the theoretical yield.
- Step 4Correct
Your efficiency calculation followed the correct formula, but the numerical result was halved due to the incorrect theoretical mass from Step 3.
- Step 5
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly compared standard reduction potentials to determine cathode selectivity.
You accurately converted units to compute total charge and moles of electrons.
You correctly identified the competing half-reaction responsible for reduced current efficiency.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the moles of copper directly to moles of electrons () instead of dividing by the ion's charge ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the valency/electron stoichiometry () in Faraday's law of electrolysis (), which treats polyvalent metal cations as if they underwent a single-electron transfer.
REASONING PATH
Your ACEpath teacher’s suggested approach- Half-Reaction Electron Count
Always write the balanced reduction half-reaction explicitly before calculating molar yields: .
Identify from the oxidation state change and compute .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the reduction half-reaction: , showing that .
Calculate theoretical moles of copper: .
Calculate theoretical mass of copper: .
Recalculate current efficiency: .
02 The student fails to convert the electrolysis time from minutes to seconds, resulting in a charge that is 60 times too small.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You multiplied current directly by time in minutes without converting to seconds. Since , time must be in seconds (), giving a charge of rather than .
- Step 3Correct
Your stoichiometric method and application of Faraday's constant were entirely correct, including using electrons per copper atom. The numerical value was off by a factor of solely because of the earlier time-unit error.
- Step 4Correct
You set up the ratio of actual yield to theoretical yield correctly, but propagating the underestimated theoretical mass resulted in an efficiency exceeding . With , the efficiency is .
- Step 5
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified as the thermodynamically favored species based on standard reduction potentials.
You properly used the electron-to-copper mole ratio () for .
You accurately identified the hydrogen evolution reaction () as the competing cathodic process.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou forgot to convert the electrolysis duration from minutes to seconds before multiplying by the current in amperes.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the definition of an ampere as coulombs per second (), which requires all electrolysis time values in to be strictly expressed in seconds.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define the Ampere in Base SI Units
, so .
Always convert minutes or hours into seconds () before calculating electrical charge .
- Physical Reality Check for Current Efficiency
Current efficiency can never exceed in a standard electrolytic deposition.
If your calculated current efficiency is greater than , immediately inspect your theoretical yield calculation for a time-unit or stoichiometry error.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert time to seconds: .
Calculate total charge: .
Calculate moles of electrons passed: .
Calculate theoretical mass of : .
Compute current efficiency: .
(a) is thermodynamically favored to be reduced (). (b) Current efficiency is ; competing reaction is .
03 The student misidentifies H⁺ as the favored species under the mistaken belief that a lower or zero potential makes a species easier to reduce.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
At the cathode, reduction occurs. A more positive standard reduction potential indicates a stronger tendency to gain electrons (a greater thermodynamic driving force). Therefore, with is thermodynamically favored over with .
- Step 2
- Step 3
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total charge passed and converted it to moles of electrons using Faraday's constant.
You used the correct stoichiometric ratio of 2 moles of electrons per mole of copper deposited.
You accurately calculated the cathodic current efficiency from the actual and theoretical masses.
You correctly wrote the balanced half-reaction for the competing reduction of protons to hydrogen gas.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual misunderstanding regarding how reduction potential correlates with thermodynamic favorability of cathodic reduction.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the thermodynamically preferred reduction with the lower (less positive) potential rather than the higher (more positive) potential. In electrochemistry, reduction represents electron gain; the more positive the standard reduction potential , the more spontaneous (favored) the species is to gain electrons and undergo reduction.
REASONING PATH
Your ACEpath teacher’s suggested approach- Cathodic vs. Anodic Selection Rule
At the cathode (reduction), the species with the most positive is reduced first. At the anode (oxidation), the species with the least positive (most negative) is oxidized first.
Always rank competing cathodic half-reactions from highest to lowest ; the highest value has the largest positive thermodynamic drive .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the competing cathode half-reactions and their standard reduction potentials: with , and with .
Recall that a higher reduction potential corresponds to a more negative (since ), meaning greater thermodynamic favorability for reduction.
Compare the numerical values: .
Conclude that is thermodynamically favored to be reduced.
(a) is thermodynamically favored to be reduced because . (b) Cathodic current efficiency is (or ); competing reaction is .
Lock it in
In Faraday's law calculations (), what does the variable represent?
is the number of moles of electrons transferred per mole of substance produced or consumed (e.g., for ).
Similar question
A steady current of is passed through an aqueous solution of for . Assuming current efficiency, calculate the mass of silver deposited at the cathode. (Molar mass of ; ).
Answer
. Key steps: . For , . . Mass .
Electroplating chromium from a solution uses a current of for . If of is deposited (molar mass ), determine the cathodic current efficiency with respect to chromium deposition.
Answer
. Key steps: . Theoretical mass: for , , so . Current efficiency .
An acidic solution containing both and is electrolyzed. A current of is passed for . At the cathode, is reduced to with current efficiency, while the rest of the current reduces to ( efficiency). Calculate the mass of deposited and the moles of formed. ().
Answer
and . Key steps: Total charge , so . For , ; with , . For , ; with , , giving mass .