Resources

A student mixes 100.0 mL100.0\,\text{mL} of 0.300 M0.300\,\text{M} acetic acid, CH3COOH(aq)\text{CH}_3\text{COOH}(aq), with 50.0 mL50.0\,\text{mL} of 0.200 M0.200\,\text{M} sodium hydroxide, NaOH(aq)\text{NaOH}(aq). Predict the neutralization products and write the net ionic equation. Then, using Ka=1.80×10−5K_a = 1.80 \times 10^{-5} for CH3COOH\text{CH}_3\text{COOH}, determine the pH\text{pH} of the resulting buffer solution at 25 ∘C25\,^{\circ}\text{C}.

Answer and steps

Final answer

Net ionic equation: CH3COOH(aq)+OH−(aq)→CH3COO−(aq)+H2O(l)\text{CH}_3\text{COOH}(aq) + \text{OH}^-(aq) \rightarrow \text{CH}_3\text{COO}^-(aq) + \text{H}_2\text{O}(l); pH=4.44\text{pH} = 4.44

Steps

01

Predict the Products and Write the Net Ionic Equation

Acetic acid (CHX3COOH\ce{CH3COOH}) is a weak monoprotic acid, and sodium hydroxide (NaOH\ce{NaOH}) is a strong base. In an aqueous neutralization reaction, the hydroxide ion abstracts a proton from the weak acid:

CHX3COOH(aq)+NaOH(aq)→CHX3COONa(aq)+HX2O(l)\ce{CH3COOH}(aq) + \ce{NaOH}(aq) \rightarrow \ce{CH3COONa}(aq) + \ce{H2O}(l)

To determine the net ionic equation:

  1. Because acetic acid is a weak electrolyte, it exists predominantly in its undissociated molecular form and is written as CHX3COOH(aq)\ce{CH3COOH}(aq).
  2. Strong electrolytes dissociate completely into ions: NaOH(aq)→NaX+(aq)+OHX−(aq)\ce{NaOH}(aq) \rightarrow \ce{Na+}(aq) + \ce{OH-}(aq) and CHX3COONa(aq)→NaX+(aq)+CHX3COOX−(aq)\ce{CH3COONa}(aq) \rightarrow \ce{Na+}(aq) + \ce{CH3COO-}(aq).
  3. Eliminate the spectator ion, NaX+(aq)\ce{Na+}(aq), from both sides.

The net ionic equation is: CHX3COOH(aq)+OHX−(aq)→CHX3COOX−(aq)+HX2O(l)\ce{CH3COOH}(aq) + \ce{OH-}(aq) \rightarrow \ce{CH3COO-}(aq) + \ce{H2O}(l)

Common Pitfall: Do not write HX+(aq)+OHX−(aq)→HX2O(l)\ce{H+}(aq) + \ce{OH-}(aq) \rightarrow \ce{H2O}(l). That equation applies only when both the acid and base are strong electrolytes. Weak acids must remain largely un-ionized in net ionic equations.


02

Calculate Initial Moles of Reactants

Find the moles of acid and base initially present:

ninitial(CHX3COOH)=M⋅V=(0.300 mol/L)⋅(0.1000 L)=0.0300 moln_{\text{initial}}(\ce{CH3COOH}) = M \cdot V = (0.300\,\text{mol/L}) \cdot (0.1000\,\text{L}) = 0.0300\,\text{mol}

ninitial(OHX−)=M⋅V=(0.200 mol/L)⋅(0.0500 L)=0.0100 moln_{\text{initial}}(\ce{OH-}) = M \cdot V = (0.200\,\text{mol/L}) \cdot (0.0500\,\text{L}) = 0.0100\,\text{mol}


03

Determine Quantities After Neutralization

Hydroxide ion (OHX−\ce{OH-}) is the limiting reactant and reacts completely:

  • Moles of CHX3COOH\ce{CH3COOH} remaining: n(CHX3COOH)=0.0300 mol−0.0100 mol=0.0200 moln(\ce{CH3COOH}) = 0.0300\,\text{mol} - 0.0100\,\text{mol} = 0.0200\,\text{mol}
  • Moles of CHX3COOX−\ce{CH3COO-} produced: n(CHX3COOX−)=0.0100 moln(\ce{CH3COO-}) = 0.0100\,\text{mol}

Because both conjugate species share the same total solution volume (Vtotal=100.0 mL+50.0 mL=150.0 mLV_{\text{total}} = 100.0\,\text{mL} + 50.0\,\text{mL} = 150.0\,\text{mL}), their mole ratio is equal to their concentration ratio:

[CHX3COOX−][CHX3COOH]=n(CHX3COOX−)n(CHX3COOH)=0.0100 mol0.0200 mol=0.500\frac{[\ce{CH3COO-}]}{[\ce{CH3COOH}]} = \frac{n(\ce{CH3COO-})}{n(\ce{CH3COOH})} = \frac{0.0100\,\text{mol}}{0.0200\,\text{mol}} = 0.500


04

Calculate the pH\text{pH} of the Buffer

First, compute pKa\text{p}K_a for acetic acid:

pKa=−log⁡10(Ka)=−log⁡10(1.80×10−5)≈4.745\text{p}K_a = -\log_{10}(K_a) = -\log_{10}(1.80 \times 10^{-5}) \approx 4.745

Next, use the Henderson-Hasselbalch equation:

pH=pKa+log⁡10([CHX3COOX−][CHX3COOH])\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\ce{CH3COO-}]}{[\ce{CH3COOH}]}\right)

pH=4.745+log⁡10(0.500)=4.745−0.301=4.44\text{pH} = 4.745 + \log_{10}(0.500) = 4.745 - 0.301 = 4.44

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio of conjugate base to weak acid in the Henderson-Hasselbalch equation, resulting in an incorrectly high pH of 5.05.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Products: CHX3COONa(aq) and HX2O(l)\text{Products: } \ce{CH3COONa}(aq) \text{ and } \ce{H2O}(l) ⟹\Longrightarrow CHX3COOH(aq)+OHX−(aq)→CHX3COOX−(aq)+HX2O(l)\ce{CH3COOH}(aq) + \ce{OH-}(aq) \rightarrow \ce{CH3COO-}(aq) + \ce{H2O}(l)

  2. Step 2

    mol CHX3COOH=0.1000 L×0.300 M=0.0300 mol\text{mol } \ce{CH3COOH} = 0.1000\,\text{L} \times 0.300\,\text{M} = 0.0300\,\text{mol} ⟹\Longrightarrow mol NaOH=0.0500 L×0.200 M=0.0100 mol\text{mol } \ce{NaOH} = 0.0500\,\text{L} \times 0.200\,\text{M} = 0.0100\,\text{mol} ⟹\Longrightarrow mol CHX3COOX− formed=0.0100 mol\text{mol } \ce{CH3COO-} \text{ formed} = 0.0100\,\text{mol} ⟹\Longrightarrow mol CHX3COOH remaining=0.0300−0.0100=0.0200 mol\text{mol } \ce{CH3COOH} \text{ remaining} = 0.0300 - 0.0100 = 0.0200\,\text{mol}

  3. Step 3

    pKa=−log⁡(1.80×10−5)=4.745\text{p}K_a = -\log(1.80 \times 10^{-5}) = 4.745 ⟹\Longrightarrow pH=pKa+log⁡([CHX3COOH][CHX3COOX−])\text{pH} = \text{p}K_a + \log\left(\frac{[\ce{CH3COOH}]}{[\ce{CH3COO-}]}\right) ⟹\Longrightarrow pH=4.745+log⁡(0.02000.0100)=4.745+0.301=5.05\text{pH} = 4.745 + \log\left(\frac{0.0200}{0.0100}\right) = 4.745 + 0.301 = 5.05

    Correct

    pH=pKa+log⁡([CHX3COOX−][CHX3COOH])=4.745+log⁡(0.01000.0200)=4.745−0.301=4.44\text{pH} = \text{p}K_a + \log\left(\frac{[\ce{CH3COO-}]}{[\ce{CH3COOH}]}\right) = 4.745 + \log\left(\frac{0.0100}{0.0200}\right) = 4.745 - 0.301 = 4.44

    In the Henderson-Hasselbalch equation, the log term is log⁡([conjugate base][weak acid])\log\left(\frac{[\text{conjugate base}]}{[\text{weak acid}]}\right), with the base in the numerator. Because more acid (0.0200 mol0.0200\,\text{mol}) remains than conjugate base (0.0100 mol0.0100\,\text{mol}), the ratio must be less than 11 and the pH\text{pH} must be lower than pKa\text{p}K_a (4.7454.745).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the molecular products and the net ionic equation for the reaction of a weak acid with a strong base.

You accurately calculated the initial moles of both reactants and applied limiting reactant stoichiometry.

You calculated the correct pKa\text{p}K_a of acetic acid from its KaK_a value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Henderson-Hasselbalch Ratio

You placed the weak acid [CHX3COOH][\ce{CH3COOH}] in the numerator and the conjugate base [CHX3COOX−][\ce{CH3COO-}] in the denominator of the Henderson-Hasselbalch equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusion regarding the ratio inside the logarithm of the Henderson-Hasselbalch equation, combined with not performing a qualitative sanity check (when [extacid]>[extbase][ ext{acid}] > [ ext{base}], pH<pKa\text{pH} < \text{p}K_a).

REASONING PATH
Your ACEpath teacher’s suggested approach
Henderson-Hasselbalch Formula
  • pH=pKa+log⁡([A−][HA])=pKa+log⁡([base][acid])\text{pH} = \text{p}K_a + \log\left(\frac{[\text{A}^-]}{[\text{HA}]}\right) = \text{p}K_a + \log\left(\frac{[\text{base}]}{[\text{acid}]}\right)

  • Remember 'base over acid' or derive it directly from Ka=[H+][A−][HA]K_a = \frac{[\text{H}^+][\text{A}^-]}{[\text{HA}]} by taking −log⁡-\log of both sides.

Qualitative pH Check
  • If [base]<[acid][\text{base}] < [\text{acid}], then [base][acid]<1\frac{[\text{base}]}{[\text{acid}]} < 1, which makes log⁡([base][acid])<0\log\left(\frac{[\text{base}]}{[\text{acid}]}\right) < 0 and pH<pKa\text{pH} < \text{p}K_a.

  • Always compare your final pH\text{pH} to pKa\text{p}K_a: an excess of weak acid relative to conjugate base must pull the pH\text{pH} below pKa\text{p}K_a.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the Henderson-Hasselbalch equation with base in the numerator: pH=pKa+log⁡([CHX3COOX−][CHX3COOH])\text{pH} = \text{p}K_a + \log\left(\frac{[\ce{CH3COO-}]}{[\ce{CH3COOH}]}\right)

  2. Substitute the calculated mole quantities: pH=4.745+log⁡(0.0100 mol0.0200 mol)\text{pH} = 4.745 + \log\left(\frac{0.0100\,\text{mol}}{0.0200\,\text{mol}}\right)

  3. Evaluate the logarithm: log⁡(0.500)=−0.301\log(0.500) = -0.301

  4. Add to pKa\text{p}K_a: pH=4.745−0.301=4.444≈4.44\text{pH} = 4.745 - 0.301 = 4.444 \approx 4.44

Final answer

pH=4.44\text{pH} = 4.44

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic 'Base on top, Acid on bottom' for the Henderson-Hasselbalch logarithmic term.

  • Perform a quick qualitative sanity check after calculating buffer pH\text{pH}: more acid means pH<pKa\text{pH} < \text{p}K_a, while more base means pH>pKa\text{pH} > \text{p}K_a.

OverviewACEpath Teacher's Diagnosis

02 The student treats acetic acid as a strong acid that completely dissociates and writes H+(aq) + OH-(aq) -> H2O(l) instead of keeping the weak acid molecule intact in the net ionic equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Products: CHX3COONa(aq)+HX2O(l)\text{Products: } \ce{CH3COONa}(aq) + \ce{H2O}(l)

  2. Step 2

    HX+(aq)+OHX−(aq)→HX2O(l)\ce{H+}(aq) + \ce{OH-}(aq) \rightarrow \ce{H2O}(l)

    Correct

    CHX3COOH(aq)+OHX−(aq)→CHX3COOX−(aq)+HX2O(l)\ce{CH3COOH}(aq) + \ce{OH-}(aq) \rightarrow \ce{CH3COO-}(aq) + \ce{H2O}(l)

    Acetic acid (CHX3COOH\ce{CH3COOH}) is a weak electrolyte that ionizes only slightly in water. In net ionic equations, weak acids must be kept as intact molecules rather than written as separated HX+(aq)\ce{H+}(aq) ions.

  3. Step 3

    mol CHX3COOH=0.1000 L⋅0.300 M=0.0300 mol  ⟹  mol OHX−=0.0500 L⋅0.200 M=0.0100 mol  ⟹  mol CHX3COOX−=0.0100 mol  ⟹  mol CHX3COOH left=0.0300−0.0100=0.0200 mol\text{mol } \ce{CH3COOH} = 0.1000\,\text{L} \cdot 0.300\,\text{M} = 0.0300\,\text{mol} \implies \text{mol } \ce{OH-} = 0.0500\,\text{L} \cdot 0.200\,\text{M} = 0.0100\,\text{mol} \implies \text{mol } \ce{CH3COO-} = 0.0100\,\text{mol} \implies \text{mol } \ce{CH3COOH left} = 0.0300 - 0.0100 = 0.0200\,\text{mol}

  4. Step 4

    pKa=−log⁡(1.80×10−5)=4.745  ⟹  pH=4.745+log⁡(0.01000.0200)=4.44\text{p}K_a = -\log(1.80 \times 10^{-5}) = 4.745 \implies \text{pH} = 4.745 + \log\left(\frac{0.0100}{0.0200}\right) = 4.44

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly predicted the neutralization reaction products.

You carried out the stoichiometric calculations accurately to find the remaining weak acid and formed conjugate base.

You correctly applied the Henderson-Hasselbalch equation to find the buffer solution pH.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Weak electrolyte dissociation in net ionic equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated acetic acid as a strong acid by dissociating it fully into HX+(aq)\ce{H+}(aq) in the net ionic equation, overlooking that weak electrolytes remain predominantly un-ionized in aqueous solution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Strong vs. Weak Electrolyte Rule
  • Only strong electrolytes (strong acids, strong bases, soluble ionic salts) are written separated into aqueous ions in ionic equations.

  • Check whether an acid is on the list of strong acids; if it is a weak acid, leave its formula intact as molecular HA(aq)\ce{HA}(aq).

Net Ionic Equation Construction
  • Only spectator ions common to both sides should be cancelled out.

  • Write the full molecular equation first, dissociate only strong soluble species, and cancel spectator ions such as NaX+(aq)\ce{Na+}(aq) to reveal the true net reaction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total ionic equation by separating only strong electrolytes: CHX3COOH(aq)+NaX+(aq)+OHX−(aq)→CHX3COOX−(aq)+NaX+(aq)+HX2O(l)\ce{CH3COOH}(aq) + \ce{Na+}(aq) + \ce{OH-}(aq) \rightarrow \ce{CH3COO-}(aq) + \ce{Na+}(aq) + \ce{H2O}(l).

  2. Identify and eliminate the spectator ion NaX+(aq)\ce{Na+}(aq) present on both sides of the equation.

  3. Write the remaining species: CHX3COOH(aq)+OHX−(aq)→CHX3COOX−(aq)+HX2O(l)\ce{CH3COOH}(aq) + \ce{OH-}(aq) \rightarrow \ce{CH3COO-}(aq) + \ce{H2O}(l).

Final answer

Net ionic equation: \ce{CH3COOH}(aq) + \ce{OH-}(aq) \rightarrow \ce{CH3COO-}(aq) + \ce{H2O}(l)}; pH=4.44\text{pH} = 4.44

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the six common strong acids (HCl\ce{HCl}, HBr\ce{HBr}, HI\ce{HI}, HNOX3\ce{HNO3}, HClOX4\ce{HClO4}, HX2SOX4\ce{H2SO4}) so you can instantly recognize weak acids.

  • Practice writing complete and net ionic equations for weak acid-strong base and strong acid-weak base neutralizations.

OverviewACEpath Teacher's Diagnosis

03 The student forgets that the reaction between acetic acid and hydroxide consumes acetic acid, using the initial moles of CH3COOH instead of the remaining moles in the Henderson-Hasselbalch equation to get pH = 4.27.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Products: CHX3COONa(aq) and HX2O(l)  ⟹  CHX3COOH(aq)+OHX−(aq)→CHX3COOX−(aq)+HX2O(l)\text{Products: } \ce{CH3COONa}(aq) \text{ and } \ce{H2O}(l) \implies \ce{CH3COOH}(aq) + \ce{OH-}(aq) \rightarrow \ce{CH3COO-}(aq) + \ce{H2O}(l)

  2. Step 2

    n(CHX3COOH)initial=0.1000 L×0.300 M=0.0300 mol  ⟹  n(OHX−)added=0.0500 L×0.200 M=0.0100 mol  ⟹  n(CHX3COOX−)=0.0100 moln(\ce{CH3COOH})_{\text{initial}} = 0.1000\text{ L} \times 0.300\text{ M} = 0.0300\text{ mol} \implies n(\ce{OH-})_{\text{added}} = 0.0500\text{ L} \times 0.200\text{ M} = 0.0100\text{ mol} \implies n(\ce{CH3COO-}) = 0.0100\text{ mol}

  3. Step 3

    pKa=−log⁡(1.80×10−5)=4.745\text{p}K_a = -\log(1.80 \times 10^{-5}) = 4.745

  4. Step 4

    pH=4.745+log⁡(0.01000.0300)=4.745−0.477=4.27\text{pH} = 4.745 + \log\left(\frac{0.0100}{0.0300}\right) = 4.745 - 0.477 = 4.27

    Correct

    pH=4.745+log⁡10(0.0100 mol0.0300 mol−0.0100 mol)=4.745+log⁡10(0.500)=4.44\text{pH} = 4.745 + \log_{10}\left(\frac{0.0100\text{ mol}}{0.0300\text{ mol} - 0.0100\text{ mol}}\right) = 4.745 + \log_{10}(0.500) = 4.44

    You substituted the initial amount of weak acid (0.0300 mol0.0300\text{ mol}) into the denominator of the Henderson-Hasselbalch equation instead of subtracting the 0.0100 mol0.0100\text{ mol} consumed by the added hydroxide.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly predicted the neutralization reaction and spectator ions to yield the proper net ionic equation.

You accurately converted volume and molarity into initial mole quantities for both reactants.

You correctly computed pKa\text{p}K_a from the given KaK_a.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Initial vs. Equilibrium Buffer Quantities

You forgot to account for the consumption of weak acid during neutralization, directly plugging the initial acid moles into the buffer ratio.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating neutralization as an isolated step without setting up an ICF (Initial-Change-Final) mole table led to omitting the subtraction step: n(HA)remaining=n(HA)initial−n(OHX−)addedn(\text{HA})_{\text{remaining}} = n(\text{HA})_{\text{initial}} - n(\ce{OH-})_{\text{added}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Use an ICF Table for Partial Neutralization
  • When a strong base reacts with an excess weak acid: n(HA)final=n(HA)initial−n(OHX−)n(\text{HA})_{\text{final}} = n(\text{HA})_{\text{initial}} - n(\ce{OH-}), and n(A−)final=n(A−)initial+n(OHX−)n(\text{A}^-)_{\text{final}} = n(\text{A}^-)_{\text{initial}} + n(\ce{OH-}).

  • Always complete an ICF table in moles before substituting into the Henderson-Hasselbalch equation.

Buffer Component Ratio
  • pH=pKa+log⁡10([A−][HA])=pKa+log⁡10(n(A−)remainingn(HA)remaining)\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\text{A}^-]}{[\text{HA}]}\right) = \text{p}K_a + \log_{10}\left(\frac{n(\text{A}^-)_{\text{remaining}}}{n(\text{HA})_{\text{remaining}}}\right).

  • Ensure both quantities in the log term represent the moles present after the acid-base reaction goes to completion.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the remaining moles of CHX3COOH\ce{CH3COOH}: n(CHX3COOH)rem=0.0300 mol−0.0100 mol=0.0200 moln(\ce{CH3COOH})_{\text{rem}} = 0.0300\text{ mol} - 0.0100\text{ mol} = 0.0200\text{ mol}.

  2. Set up the Henderson-Hasselbalch equation with equilibrium moles: pH=4.745+log⁡10(0.01000.0200)\text{pH} = 4.745 + \log_{10}\left(\frac{0.0100}{0.0200}\right).

  3. Evaluate the logarithm: log⁡10(0.500)=−0.301\log_{10}(0.500) = -0.301.

  4. Compute the final pH\text{pH}: pH=4.745−0.301=4.44\text{pH} = 4.745 - 0.301 = 4.44.

Final answer

pH=4.44\text{pH} = 4.44

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice using 3-row ICF (Initial, Change, Final) stoichiometry tables whenever strong acid or base is added to a buffer system.

  • Verify that the addition of a strong base causes the pH\text{pH} to increase or stay above what an unreacted acid would produce, and always check that n(acid)final<n(acid)initialn(\text{acid})_{\text{final}} < n(\text{acid})_{\text{initial}}.

Lock it in

Similar question

01

A buffer solution contains 0.040 mol0.040\,\text{mol} of nitrous acid, HNOX2\ce{HNO2} (Ka=4.5×10−4K_a = 4.5 \times 10^{-4}, pKa=3.35\text{p}K_a = 3.35), and 0.080 mol0.080\,\text{mol} of potassium nitrite, KNOX2\ce{KNO2}, in a total volume of 500.0 mL500.0\,\text{mL}. Calculate the pH\text{pH} of the buffer.

Answer

pH=3.65\text{pH} = 3.65. Key steps: Identify conjugate base as NOX2X−\ce{NO2-} (0.080 mol0.080\,\text{mol}) and weak acid as HNOX2\ce{HNO2} (0.040 mol0.040\,\text{mol}). Apply pH=pKa+log⁡([NOX2X−][HNOX2])=3.35+log⁡(0.0800.040)=3.35+log⁡(2.0)=3.35+0.301=3.65\text{pH} = \text{p}K_a + \log\left(\frac{[\ce{NO2-}]}{[\ce{HNO2}]}\right) = 3.35 + \log\left(\frac{0.080}{0.040}\right) = 3.35 + \log(2.0) = 3.35 + 0.301 = 3.65.

02

A student mixes 150.0 mL150.0\,\text{mL} of 0.200 M  HCOOH0.200\,\text{M}\;\ce{HCOOH} (formic acid, Ka=1.80×10−4K_a = 1.80 \times 10^{-4}) with 100.0 mL100.0\,\text{mL} of 0.150 M  KOH0.150\,\text{M}\;\ce{KOH}. Predict the net ionic equation and calculate the pH\text{pH} of the resulting solution.

Answer

Net ionic equation: HCOOH(aq)+OHX−(aq)→HCOOX−(aq)+HX2O(l)\ce{HCOOH}(aq) + \ce{OH-}(aq) \rightarrow \ce{HCOO-}(aq) + \ce{H2O}(l); pH=3.44\text{pH} = 3.44. Key steps: Initial moles: n(HCOOH)=0.1500 L×0.200 M=0.0300 moln(\ce{HCOOH}) = 0.1500\,\text{L} \times 0.200\,\text{M} = 0.0300\,\text{mol}, n(OHX−)=0.1000 L×0.150 M=0.0150 moln(\ce{OH-}) = 0.1000\,\text{L} \times 0.150\,\text{M} = 0.0150\,\text{mol}. After reaction: n(HCOOX−)=0.0150 moln(\ce{HCOO-}) = 0.0150\,\text{mol}, n(HCOOH)=0.0300−0.0150=0.0150 moln(\ce{HCOOH}) = 0.0300 - 0.0150 = 0.0150\,\text{mol}. Since [HCOOX−]=[HCOOH][\ce{HCOO-}] = [\ce{HCOOH}], pH=pKa=−log⁡(1.80×10−4)=3.74−0=3.74\text{pH} = \text{p}K_a = -\log(1.80 \times 10^{-4}) = 3.74 - 0 = 3.74 (wait: 0.0150/0.0150=10.0150 / 0.0150 = 1, so pH=pKa=3.74\text{pH} = \text{p}K_a = 3.74).

03

A chemist prepares a buffer by mixing 200.0 mL200.0\,\text{mL} of 0.250 M  NHX30.250\,\text{M}\;\ce{NH3} (Kb=1.80×10−5K_b = 1.80 \times 10^{-5}) with 100.0 mL100.0\,\text{mL} of 0.200 M  HCl0.200\,\text{M}\;\ce{HCl}. Determine the net ionic equation for the reaction, and find the pH\text{pH} of the resulting solution at 25 ∘C25\,^{\circ}\text{C}.

Answer

Net ionic equation: NHX3(aq)+HX3OX+(aq)→NHX4X+(aq)+HX2O(l)\ce{NH3}(aq) + \ce{H3O+}(aq) \rightarrow \ce{NH4+}(aq) + \ce{H2O}(l) (or NHX3(aq)+HX+(aq)→NHX4X+(aq)\ce{NH3}(aq) + \ce{H+}(aq) \rightarrow \ce{NH4+}(aq)); pH=9.43\text{pH} = 9.43. Key steps: n(NHX3)initial=0.2000 L×0.250 M=0.0500 moln(\ce{NH3})_{\text{initial}} = 0.2000\,\text{L} \times 0.250\,\text{M} = 0.0500\,\text{mol}; n(HX+)initial=0.1000 L×0.200 M=0.0200 moln(\ce{H+})_{\text{initial}} = 0.1000\,\text{L} \times 0.200\,\text{M} = 0.0200\,\text{mol}. Limiting reactant HX+\ce{H+} reacts completely: n(NHX4X+)=0.0200 moln(\ce{NH4+}) = 0.0200\,\text{mol}, n(NHX3)remaining=0.0500−0.0200=0.0300 moln(\ce{NH3})_{\text{remaining}} = 0.0500 - 0.0200 = 0.0300\,\text{mol}. For NHX4X+\ce{NH4+}, pKa=14.00−pKb=14.00−4.745=9.255\text{p}K_a = 14.00 - \text{p}K_b = 14.00 - 4.745 = 9.255. Using Henderson-Hasselbalch: pH=pKa+log⁡([NHX3][NHX4X+])=9.255+log⁡(0.03000.0200)=9.255+0.176=9.43\text{pH} = \text{p}K_a + \log\left(\frac{[\ce{NH3}]}{[\ce{NH4+}]}\right) = 9.255 + \log\left(\frac{0.0300}{0.0200}\right) = 9.255 + 0.176 = 9.43.

Loading workspace…