Resources

An industrial wastewater sample contains 325 mg/L325\text{ mg/L} of dissolved sulfate ions, SO42− (aq)\text{SO}_4^{2-}\,(\text{aq}). To remove the sulfate by precipitation, a technician adds an aqueous solution of lead(II) acetate, Pb(C2H3O2)2 (aq)\text{Pb(C}_2\text{H}_3\text{O}_2)_2\,(\text{aq}). (a) Write the balanced net ionic equation for the precipitation reaction. (b) Convert the concentration of SO42−\text{SO}_4^{2-} in the wastewater to millimoles per liter (mmol/L\text{mmol/L}), given the molar mass of SO42−\text{SO}_4^{2-} is 96.06 g/mol96.06\text{ g/mol}. (c) Calculate the mass in milligrams of solid PbSO4 (s)\text{PbSO}_4\,(\text{s}) (molar mass =303.26 g/mol= 303.26\text{ g/mol}) formed per liter of wastewater assuming stoichiometric conversion.

Answer and steps

Final answer

(a) Pb2+ (aq)+SO42− (aq)→PbSO4 (s)\text{Pb}^{2+}\,(\text{aq}) + \text{SO}_4^{2-}\,(\text{aq}) \rightarrow \text{PbSO}_4\,(\text{s}); (b) [SO42−]=3.38 mmol/L[\text{SO}_4^{2-}] = 3.38\text{ mmol/L}; (c) Mass of PbSO4 (s)=1.03×103 mg\text{PbSO}_4\,(\text{s}) = 1.03 \times 10^3\text{ mg} (or 1.03 g1.03\text{ g}).

Steps

Part (a): Write the Balanced Net Ionic Equation

  1. Identify the species present in solution:

    • Lead(II) acetate is a soluble, strong electrolyte that dissociates completely in water: Pb(CX2HX3OX2)X2(aq)→PbX2+(aq)+2 CX2HX3OX2X−(aq)\ce{Pb(C2H3O2)2(aq) -> Pb^{2+}(aq) + 2C2H3O2^-(aq)}
    • The wastewater contains dissolved sulfate ions: SOX4X2−(aq)\ce{SO4^{2-}(aq)}.
  2. Determine the precipitate using solubility rules:

    • Acetates (CX2HX3OX2X−\ce{C2H3O2^-}) are generally soluble.
    • Sulfates (SOX4X2−\ce{SO4^{2-}}) are usually soluble, but lead(II) sulfate, PbSOX4\ce{PbSO4}, is an insoluble solid precipitate.
  3. Write the net ionic equation:

    • Omitting the spectator acetate ions (CX2HX3OX2X−\ce{C2H3O2^-}), the reaction between lead(II) ions and sulfate ions is: PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}

Part (b): Convert Sulfate Concentration to mmol/L\text{mmol/L}

  1. Relate mass, molar mass, and moles:

    • Molar mass of SOX4X2−=96.06 g/mol=96.06 mg/mmol\ce{SO4^{2-}} = 96.06\text{ g/mol} = 96.06\text{ mg/mmol}.
    • Given concentration: 325 mg/L325\text{ mg/L}.
  2. Calculate the concentration in millimoles per liter: [SOX4X2−]=325 mg/L96.06 mg/mmol≈3.3833 mmol/L[\ce{SO4^{2-}}] = \frac{325\text{ mg/L}}{96.06\text{ mg/mmol}} \approx 3.3833\text{ mmol/L}

    Rounding to three significant figures gives: [SOX4X2−]=3.38 mmol/L[\ce{SO4^{2-}}] = 3.38\text{ mmol/L}


Part (c): Calculate the Mass of PbSOX4(s)\ce{PbSO4(s)} Formed

  1. Use the stoichiometric ratio:

    • According to the balanced net ionic equation, 1 mol1\text{ mol} of SOX4X2−\ce{SO4^{2-}} reacts with 1 mol1\text{ mol} of PbX2+\ce{Pb^{2+}} to produce 1 mol1\text{ mol} of PbSOX4(s)\ce{PbSO4(s)}: nPbSOX4=nSOX4X2−=3.3833 mmol per litern_{\ce{PbSO4}} = n_{\ce{SO4^{2-}}} = 3.3833\text{ mmol per liter}
  2. Calculate the mass in milligrams:

    • Molar mass of PbSOX4=303.26 g/mol=303.26 mg/mmol\ce{PbSO4} = 303.26\text{ g/mol} = 303.26\text{ mg/mmol}. Mass of PbSOX4=3.3833 mmol⋅303.26 mg/mmol≈1026 mg\text{Mass of }\ce{PbSO4} = 3.3833\text{ mmol} \cdot 303.26\text{ mg/mmol} \approx 1026\text{ mg}

    Expressing the result to three significant figures: Mass of PbSOX4=1.03×103 mg(or 1.03 g)\text{Mass of }\ce{PbSO4} = 1.03 \times 10^3\text{ mg}\quad (\text{or } 1.03\text{ g})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student writes a full molecular equation instead of the requested net ionic equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Pb(CX2HX3OX2)X2(aq)+NaX2SOX4(aq)→PbSOX4(s)+2 NaCX2HX3OX2(aq)\ce{Pb(C2H3O2)2(aq) + Na2SO4(aq) -> PbSO4(s) + 2NaC2H3O2(aq)}

    Correct

    PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}

    The question asked for a net ionic equation and only specified dissolved sulfate ions SOX4X2−(aq)\ce{SO4^{2-}(aq)}, without any sodium present. In a net ionic equation, you only include the ions directly participating in bond formation to yield the solid precipitate, omitting spectator ions.

  2. Step 2

    325 mg/L=0.325 g/L  ⟹  (0.325 g/L)/(96.06 g/mol)=0.00338 mol/L  ⟹  0.00338 mol/L×1000 mmol/mol=3.38 mmol/L325\text{ mg/L} = 0.325\text{ g/L} \implies (0.325\text{ g/L}) / (96.06\text{ g/mol}) = 0.00338\text{ mol/L} \implies 0.00338\text{ mol/L} \times 1000\text{ mmol/mol} = 3.38\text{ mmol/L}

  3. Step 3

    3.38 mmol/L PbSOX4 formed  ⟹  3.38 mmol/L×303.26 mg/mmol=1025 mg3.38\text{ mmol/L }\ce{PbSO4}\text{ formed} \implies 3.38\text{ mmol/L} \times 303.26\text{ mg/mmol} = 1025\text{ mg}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the concentration of sulfate ions from milligrams per liter to millimoles per liter.

You accurately identified that lead(II) and sulfate react in a 1:11:1 mole ratio to form lead(II) sulfate precipitate.

You correctly calculated the final mass of precipitate using the molar mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Molecular Equation Instead of Net Ionic Equation

You assumed a sodium counterion for sulfate and wrote a molecular double-replacement equation rather than isolating the active participating ions.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating a full molecular equation with a net ionic equation, likely stemming from a habit of needing a neutral molecular reactant formula even when isolated aqueous ions are already provided.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Active Ions vs. Spectators
  • A net ionic equation includes only the chemical species that undergo a change (e.g., forming a precipitate, weak electrolyte, or gas). Spectator ions are omitted entirely.

  • Write only the ions that form the precipitate: PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the reacting cation from lead(II) acetate: PbX2+(aq)\ce{Pb^{2+}(aq)}.

  2. Identify the reacting anion provided in the wastewater: SOX4X2−(aq)\ce{SO4^{2-}(aq)}.

  3. Combine them to form the insoluble solid precipitate: PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}.

Final answer

(a) PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}; (b) [SOX4X2−]=3.38 mmol/L[\ce{SO4^{2-}}] = 3.38\text{ mmol/L}; (c) Mass of PbSOX4=1.03×103 mg\text{Mass of }\ce{PbSO4} = 1.03 \times 10^3\text{ mg} (or 1025 mg1025\text{ mg})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice extracting net ionic equations directly from word descriptions without inventing counterions.

  • Review solubility rules to quickly identify which ionic pairs form precipitates and which remain as aqueous spectators.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies by the molar mass instead of dividing when converting mass concentration to molar concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Pb2+(aq)+SO42−(aq)→PbSO4(s)\text{Pb}^{2+}(\text{aq}) + \text{SO}_4^{2-}(\text{aq}) \rightarrow \text{PbSO}_4(\text{s})

  2. Step 2

    325 mg/L×96.06 mg/mmol=31219.5 mmol/L=3.12×104 mmol/L325\text{ mg/L} \times 96.06\text{ mg/mmol} = 31219.5\text{ mmol/L} = 3.12 \times 10^4\text{ mmol/L}

    Correct

    [SO42−]=325 mg/L96.06 mg/mmol=3.38 mmol/L[\text{SO}_4^{2-}] = \frac{325\text{ mg/L}}{96.06\text{ mg/mmol}} = 3.38\text{ mmol/L}

    You multiplied the mass concentration by molar mass instead of dividing. Because molar mass has units of mg/mmol\text{mg/mmol}, finding amount of substance requires dividing mass by molar mass: mg/Lmg/mmol=mmol/L\frac{\text{mg/L}}{\text{mg/mmol}} = \text{mmol/L}.

  3. Step 3

    31219.5 mmol/L×303.26 mg/mmol=9.47×106 mg31219.5\text{ mmol/L} \times 303.26\text{ mg/mmol} = 9.47 \times 10^6\text{ mg}

    Correct

    Mass of PbSO4=3.3833 mmol/L×1 L×303.26 mg/mmol=1.03×103 mg\text{Mass of } \text{PbSO}_4 = 3.3833\text{ mmol/L} \times 1\text{ L} \times 303.26\text{ mg/mmol} = 1.03 \times 10^3\text{ mg}

    Your setup of multiplying moles by molar mass was conceptually correct, but this step was affected by using the incorrect concentration from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the correct balanced net ionic equation including aqueous and solid states.

You recognized that to find mass from millimoles, you multiply by the molar mass in mg/mmol\text{mg/mmol}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Multiplied by molar mass instead of dividing

You set up part (b) by multiplying 325 mg/L325\text{ mg/L} by 96.06 mg/mmol96.06\text{ mg/mmol} rather than dividing.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the dimensional analysis relationship between mass, molar mass, and moles (n=mMn = \frac{m}{M}). Tracking the explicit cancellation of units reveals that multiplying mg/L×mg/mmol\text{mg/L} \times \text{mg/mmol} yields mg2/(L⋅mmol)\text{mg}^2/(\text{L}\cdot\text{mmol}), not mmol/L\text{mmol/L}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit cancellation check
  • Always write out units as fractions: mg÷(mgmmol)=mg×(mmolmg)=mmol\text{mg} \div \left(\frac{\text{mg}}{\text{mmol}}\right) = \text{mg} \times \left(\frac{\text{mmol}}{\text{mg}}\right) = \text{mmol}.

  • Before calculating, verify that the unit you want to eliminate is in the denominator of the conversion factor.

Magnitude sanity check
  • One mole (or millimole) corresponds to the mass number in grams (or milligrams).

  • Since one millimole of sulfate weighs about 96 mg96\text{ mg}, 325 mg325\text{ mg} should be roughly 3 to 4 mmol3\text{ to }4\text{ mmol}, not tens of thousands of millimoles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the sulfate molar concentration by dividing mass concentration by molar mass: [SO42−]=325 mg/L96.06 mg/mmol≈3.3833 mmol/L[\text{SO}_4^{2-}] = \frac{325\text{ mg/L}}{96.06\text{ mg/mmol}} \approx 3.3833\text{ mmol/L}.

  2. Apply the 1:11:1 stoichiometric ratio from part (a): 1 L1\text{ L} of wastewater contains 3.3833 mmol3.3833\text{ mmol} of SO42−\text{SO}_4^{2-}, producing 3.3833 mmol3.3833\text{ mmol} of PbSO4(s)\text{PbSO}_4(\text{s}).

  3. Multiply by the molar mass of PbSO4\text{PbSO}_4: 3.3833 mmol×303.26 mg/mmol≈1026 mg3.3833\text{ mmol} \times 303.26\text{ mg/mmol} \approx 1026\text{ mg}.

Final answer

(a) Pb2+(aq)+SO42−(aq)→PbSO4(s)\text{Pb}^{2+}(\text{aq}) + \text{SO}_4^{2-}(\text{aq}) \rightarrow \text{PbSO}_4(\text{s}); (b) 3.38 mmol/L3.38\text{ mmol/L}; (c) 1.03×103 mg1.03 \times 10^3\text{ mg} (or 1.03 g1.03\text{ g})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing dimensional analysis unit fractions showing cross-cancellation for every mole-mass conversion.

  • Perform a mental order-of-magnitude estimation before entering numbers into your calculator.

OverviewACEpath Teacher's Diagnosis

03 The student introduces an extraneous unit conversion factor of 1000 by misinterpreting grams to milligrams during the conversion to millimoles.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Pb2+(aq)+SO42−(aq)→PbSO4(s)\text{Pb}^{2+}(\text{aq}) + \text{SO}_4^{2-}(\text{aq}) \rightarrow \text{PbSO}_4(\text{s})

  2. Step 2

    325 mg/L/(96.06 g/mol)=3.38⟹3.38/1000=0.00338 mmol/L325\text{ mg/L} / (96.06\text{ g/mol}) = 3.38 \Longrightarrow 3.38 / 1000 = 0.00338\text{ mmol/L}

    Correct

    [SO42−]=325 mg/L96.06 mg/mmol=3.38 mmol/L[\text{SO}_4^{2-}] = \frac{325\text{ mg/L}}{96.06\text{ mg/mmol}} = 3.38\text{ mmol/L}

    Because 1 g/mol=1 mg/mmol1\text{ g/mol} = 1\text{ mg/mmol}, dividing 325 mg/L325\text{ mg/L} by 96.06 g/mol96.06\text{ g/mol} directly yields 3.38 mmol/L3.38\text{ mmol/L}. Dividing by 10001000 gave 0.00338 mol/L0.00338\text{ mol/L}, but you labeled it as mmol/L\text{mmol/L}.

  3. Step 3

    0.00338 mmol/L×303.26 mg/mmol=1.03 mg0.00338\text{ mmol/L} \times 303.26\text{ mg/mmol} = 1.03\text{ mg}

    Correct

    Mass of PbSO4=3.3833 mmol×303.26 mg/mmol=1.03×103 mg\text{Mass of }\text{PbSO}_4 = 3.3833\text{ mmol} \times 303.26\text{ mg/mmol} = 1.03 \times 10^3\text{ mg} (or 1.03 g1.03\text{ g})

    Your stoichiometry and multiplication method were correct, but your numerical value was off by a factor of 10001000 due to the carried-over error from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified lead(II) sulfate as the insoluble precipitate and wrote the balanced net ionic equation.

You correctly selected the molar masses and applied the 1:11:1 stoichiometric ratio between sulfate ions and lead(II) sulfate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Extraneous metric prefix conversion

You divided by 10001000 after computing 325/96.06325 / 96.06, mistaking the resulting value for moles rather than millimoles.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the equivalence 1 g/mol≡1 mg/mmol1\text{ g/mol} \equiv 1\text{ mg/mmol}. When mass is given in milligrams and molar mass in grams per mole, dividing them directly yields millimoles without requiring an extra factor of 10001000.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equivalence of Unit Ratios
  • 1 g1 mol=1000 mg1000 mmol=1 mg/mmol\frac{1\text{ g}}{1\text{ mol}} = \frac{1000\text{ mg}}{1000\text{ mmol}} = 1\text{ mg/mmol}.

  • Whenever mass is expressed in mg\text{mg}, use molar mass directly as mg/mmol\text{mg/mmol} to obtain quantity directly in mmol\text{mmol}.

Sanity Check on Prefixes
  • 1 mol=1000 mmol1\text{ mol} = 1000\text{ mmol}, so the numerical value in mmol\text{mmol} must always be larger than the numerical value in mol\text{mol}.

  • Verify that your concentration in mmol/L\text{mmol/L} (3.383.38) is 10001000 times larger than in mol/L\text{mol/L} (0.003380.00338).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert sulfate mass concentration directly to millimoles: [SO42−]=325 mg/L96.06 mg/mmol=3.3833 mmol/L≈3.38 mmol/L[\text{SO}_4^{2-}] = \frac{325\text{ mg/L}}{96.06\text{ mg/mmol}} = 3.3833\text{ mmol/L} \approx 3.38\text{ mmol/L}.

  2. Apply the 1:11:1 stoichiometric ratio to find the amount of PbSO4(s)\text{PbSO}_4(\text{s}) formed per liter: n=3.3833 mmoln = 3.3833\text{ mmol}.

  3. Calculate mass: 3.3833 mmol×303.26 mg/mmol=1026 mg≈1.03×103 mg3.3833\text{ mmol} \times 303.26\text{ mg/mmol} = 1026\text{ mg} \approx 1.03 \times 10^3\text{ mg} (or 1.03 g1.03\text{ g}).

Final answer

(a) Pb2+(aq)+SO42−(aq)→PbSO4(s)\text{Pb}^{2+}(\text{aq}) + \text{SO}_4^{2-}(\text{aq}) \rightarrow \text{PbSO}_4(\text{s}); (b) [SO42−]=3.38 mmol/L[\text{SO}_4^{2-}] = 3.38\text{ mmol/L}; (c) 1.03×103 mg1.03 \times 10^3\text{ mg} (or 1.03 g1.03\text{ g})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting mass in milligrams directly to millimoles using mg/mmol\text{mg/mmol}.

  • Track units explicitly at each stage of dimensional analysis to prevent unnecessary factor-of-10001000 conversions.

Lock it in

Similar question

01

Write the balanced net ionic equation for the reaction that occurs when aqueous barium chloride, BaClX2(aq)\ce{BaCl2(aq)}, is mixed with aqueous sodium sulfate, NaX2SOX4(aq)\ce{Na2SO4(aq)}.

Answer

BaX2+(aq)+SOX4X2−(aq)→BaSOX4(s)\ce{Ba^{2+}(aq) + SO4^{2-}(aq) -> BaSO4(s)}. The NaX+\ce{Na+} and ClX−\ce{Cl-} ions remain aqueous as spectators and are omitted.

02

An environmental sample contains 150 mg/L150\text{ mg/L} of carbonate ions, COX3X2−(aq)\ce{CO3^{2-}(aq)}. Aqueous calcium nitrate, Ca(NOX3)X2(aq)\ce{Ca(NO3)2(aq)}, is added in excess to precipitate CaCOX3(s)\ce{CaCO3(s)}. (a) Write the balanced net ionic equation. (b) Calculate the mass in milligrams of CaCOX3(s)\ce{CaCO3(s)} (molar mass =100.09 g/mol= 100.09\text{ g/mol}) formed per liter of water given the molar mass of COX3X2−\ce{CO3^{2-}} is 60.01 g/mol60.01\text{ g/mol}.

Answer

(a) CaX2+(aq)+COX3X2−(aq)→CaCOX3(s)\ce{Ca^{2+}(aq) + CO3^{2-}(aq) -> CaCO3(s)}. (b) [COX3X2−]=150 mg/L60.01 mg/mmol≈2.50 mmol/L[\ce{CO3^{2-}}] = \frac{150\text{ mg/L}}{60.01\text{ mg/mmol}} \approx 2.50\text{ mmol/L}. Mass of CaCOX3=2.50 mmol×100.09 mg/mmol=250 mg\ce{CaCO3} = 2.50\text{ mmol} \times 100.09\text{ mg/mmol} = 250\text{ mg}.

03

A 500.0 mL500.0\text{ mL} industrial rinse stream containing 0.0250 M PbX2+(aq)0.0250\text{ M}\ \ce{Pb^{2+}(aq)} is treated with 0.0400 M NaCl(aq)0.0400\text{ M}\ \ce{NaCl(aq)}. (a) Write the balanced net ionic equation for the formation of solid lead(II) chloride. (b) What volume in milliliters of the NaCl\ce{NaCl} solution is required to completely precipitate all the lead ions?

Answer

(a) PbX2+(aq)+2 ClX−(aq)→PbClX2(s)\ce{Pb^{2+}(aq) + 2Cl-(aq) -> PbCl2(s)}. (b) Moles of PbX2+=0.5000 L×0.0250 mol/L=0.0125 mol\ce{Pb^{2+}} = 0.5000\text{ L} \times 0.0250\text{ mol/L} = 0.0125\text{ mol}. Moles of ClX−\ce{Cl-} required =2×0.0125 mol=0.0250 mol= 2 \times 0.0125\text{ mol} = 0.0250\text{ mol}. Volume of NaCl=0.0250 mol0.0400 mol/L=0.625 L=625 mL\ce{NaCl} = \frac{0.0250\text{ mol}}{0.0400\text{ mol/L}} = 0.625\text{ L} = 625\text{ mL}.

Loading workspace…