Resources
In a gravimetric chloride determination lab, a dry sample of an impure soluble chloride salt is dissolved in deionized water and titrated with . The endpoint is reached after adding exactly of the titrant, completely precipitating all chloride ions as silver chloride, . Write the balanced net ionic equation for the titration reaction, and calculate the mass percentage of chloride (, molar mass ) in the original solid sample.
Answer and steps
Final answer
Net ionic equation: ; Mass percentage:
Steps
Write the Balanced Net Ionic Equation
When aqueous silver nitrate () is added to a solution containing dissolved chloride ions (), silver ions () and chloride ions combine to form an insoluble white precipitate of silver chloride (). The nitrate ions () and the cations from the unknown salt remain dissolved as spectator ions.
Canceling spectator ions gives the net ionic precipitation equation:
Determine the Moles of Silver Ions Consumed
Convert the volume of the solution from milliliters to liters:
Use molarity () to find the moles of ions delivered at the endpoint:
Calculate the Mass of Chloride Ions in the Sample
From the stoichiometric ratio in the net ionic equation:
Multiply by the molar mass of chloride () to find the mass of chloride ions present:
Calculate the Mass Percentage of Chloride
Divide the mass of chloride by the total mass of the impure sample and multiply by :
Typical errors
01 The student forgets to convert the titrant volume from milliliters to liters when calculating moles, resulting in a calculated chloride mass that implausibly exceeds the total sample mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Molarity is defined in moles per liter (). Multiplying molarity directly by milliliters yields millimoles (), not moles. You needed to divide by to convert the volume to .
- Step 3Correct
Your formula is correct, but the result is times too large because it inherited the incorrect mole value from Step 2.
- Step 4
%^- = 100% = 32350%
Correct%^- = \left( ight) 100% 32.35%
You correctly set up the mass percentage ratio, but the propagated mass produced an answer of . A constituent percentage in an impure solid sample cannot exceed , which serves as an immediate check that a volume unit conversion was missed earlier.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly wrote the balanced net ionic precipitation equation with accurate phases.
You correctly recognized the stoichiometric ratio between and .
You correctly applied the molar mass of chloride to convert moles to grams.
You correctly structured the mass percentage expression as the component mass divided by total sample mass multiplied by .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou multiplied molarity by volume in milliliters directly and labeled the product as moles instead of millimoles.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated molarity as a bare conversion factor without canceling the liter unit against the volume unit (, so ). Furthermore, you did not use the resulting percentage () as a physical sanity check.
REASONING PATH
Your ACEpath teacher’s suggested approach- Molarity Unit Alignment
Molarity has units of . To find moles, the volume must be in liters: .
Always rewrite as explicitly and multiply by whenever volume is given in milliliters.
- Physical Reality Sanity Check
The mass of any constituent element or ion cannot exceed the total mass of the original sample (), and mass percentage must always lie between and .
Whenever a calculated percentage exceeds (especially by a factor of ), inspect volume conversions and molar masses immediately.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert titrant volume: .
Calculate moles of (and thus ): .
Calculate mass of : .
Calculate mass percentage: .
Net ionic equation: ; Mass percentage:
02 The student uses the molar mass of silver chloride (143.32 g/mol) instead of chloride ion (35.45 g/mol) to calculate the mass percentage, mistaking the mass of precipitate for the mass of chloride.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You multiplied by the molar mass of silver chloride (, ) instead of the atomic molar mass of chloride ions (, ). This calculates the mass of the precipitate formed rather than the mass of chloride in the initial sample.
- Step 4
%^- = 100% = 130.8%
Correct%^- = 100% = 32.35%
Your formula structure for mass percentage is correct, but the result is affected by the incorrect mass carried over from the previous step. Notice that a mass percentage greater than is a clear signal that the analyte mass was overestimated.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly wrote the balanced net ionic precipitation equation.
You calculated the moles of titrant and applied the stoichiometric ratio accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the molar mass of the compound precipitate () in place of the analyte ion ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn gravimetric and precipitation titrations, it is common to confuse the precipitate's total mass with the mass of the specific target element or ion being analyzed. Because the question asked for , the relevant molar mass is that of alone, not the entire salt.
REASONING PATH
Your ACEpath teacher’s suggested approach- Target Analyte vs. Precipitate
When calculating the mass percentage of an individual constituent ion (such as ), use the molar mass of that specific ion (), not the precipitate containing it (, ).
Check the prompt's required percentage target before multiplying moles by molar mass.
- Physical Reality Check for Mass Percentage
The mass percentage of any single component in an impure solid mixture must be strictly between and .
Whenever a calculated percentage exceeds , pause immediately to check whether the component mass is larger than the original sample.
CORRECTED PATH
ACEpath Teacher's DemonstrationMultiply the moles of chloride ions by the molar mass of chloride: .
Divide by the sample mass and convert to a percentage: .
Net ionic equation: ; Mass percentage:
03 The student writes a full molecular equation involving spectator ions instead of the requested net ionic equation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The prompt asks for a net ionic equation for an unspecified soluble chloride salt. Writing a full molecular equation assumes the spectator cation is , which was not given, and includes spectator ions that should be omitted.
- Step 2
- Step 3
- Step 4
% = 100% = 32.35%
WHAT YOU DID WELL
Compliments from Your TeacherYou converted the titrant volume to liters and accurately found the moles of reacting silver ions.
You used the correct stoichiometric ratio between and .
You correctly calculated the mass of chloride and divided by the total sample mass to determine the mass percentage.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou wrote a molecular equation with an assumed spectator counterion () rather than canceling spectator ions to show only the species directly forming the precipitate.
REASONING PATH
Your ACEpath teacher’s suggested approach- Net Ionic vs. Molecular Equations
A net ionic equation shows only the specific dissolved ions and species directly involved in forming the precipitate, omitting all spectator ions.
Whenever a question specifies an unknown or generic salt, write only the ions that form the precipitate: .
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the active ions in solution that combine to form the insoluble solid: silver cations, , and chloride anions, .
Combine them to form solid silver chloride without adding unstated spectator cations: .
Net ionic equation: ; Mass percentage:
Lock it in
What quantity do you get when you multiply molarity (, in ) directly by volume in milliliters ()?
You get millimoles (), not moles (). To find moles, you must multiply by volume in liters.
Similar question
A sample of soluble bromide salt requires of to reach the precipitation endpoint. Calculate the moles of consumed and the mass of (molar mass ) present.
Answer
. Because the ratio is , .
A sample containing an unknown chloride is titrated with . The titration reaches the equivalence point at . Determine the mass percentage of chloride (molar mass ) in the sample.
Answer
. Steps: . . .
A sample of an impure sulfate salt is dissolved and titrated with , forming insoluble . If of titrant is required to precipitate all sulfate ions, write the net ionic equation and calculate the mass percentage of (molar mass ) in the sample.
Answer
Net ionic equation: ; Mass percentage: . Steps: . . .