Resources

An industrial wastewater stream contains sulfate contamination at a concentration of 480.0 mg/L480.0\text{ mg/L} of SO42−\text{SO}_4^{2-}. To remove sulfate, an environmental technician treats a 2.50 L2.50\text{ L} aliquot of this wastewater with 50.0 mL50.0\text{ mL} of a solution containing 35.0 mmol/L35.0\text{ mmol/L} of lead(II) nitrate, Pb(NO3)2\text{Pb(NO}_3)_2. Given Ksp(PbSO4)=2.5×10−8K_{sp}(\text{PbSO}_4) = 2.5 \times 10^{-8} at 25∘C25^\circ\text{C} and molar mass of PbSO4=303.26 g/mol\text{PbSO}_4 = 303.26\text{ g/mol}, demonstrate whether a precipitate forms by calculating the ion product quotient QspQ_{sp}, write the net ionic equation, and calculate the maximum theoretical mass of dried precipitate in milligrams.

Answer and steps

Final answer

Precipitate forms because Qsp=3.36×10−5>Ksp=2.5×10−8Q_{sp} = 3.36 \times 10^{-5} > K_{sp} = 2.5 \times 10^{-8}. Net ionic equation: Pb2+(aq)+SO42−(aq)→PbSO4(s)\text{Pb}^{2+}(aq) + \text{SO}_4^{2-}(aq) \rightarrow \text{PbSO}_4(s). Theoretical yield of PbSO4\text{PbSO}_4: 531 mg531\text{ mg}.

Steps

01

Calculate the initial molar concentrations of the reacting ions

First, determine the total volume of the mixture: Vtotal=2.50 L+0.0500 L=2.55 LV_{\text{total}} = 2.50\text{ L} + 0.0500\text{ L} = 2.55\text{ L}

Next, find the moles of each reactant ion prior to reaction:

  1. Lead(II) ions, PbX2+\ce{Pb^{2+}}: Moles of PbX2+=50.0 mL×1 L1000 mL×35.0 mmol/L=1.75 mmol=1.75×10−3 mol\text{Moles of }\ce{Pb^{2+}} = 50.0\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} \times 35.0\text{ mmol/L} = 1.75\text{ mmol} = 1.75 \times 10^{-3}\text{ mol} The initial concentration of lead(II) ions immediately after mixing is: [PbX2+]0=1.75×10−3 mol2.55 L≈6.86×10−4 M[\ce{Pb^{2+}}]_0 = \frac{1.75 \times 10^{-3}\text{ mol}}{2.55\text{ L}} \approx 6.86 \times 10^{-4}\text{ M}
  2. Sulfate ions, SOX4X2−\ce{SO4^{2-}}: Given the wastewater concentration of sulfate ions, the molar concentration in the initial stream is: [SOX4X2−]initial=480.0 mg/L96.06 g/mol≈5.00 mmol/L[\ce{SO4^{2-}}]_{\text{initial}} = \frac{480.0\text{ mg/L}}{96.06\text{ g/mol}} \approx 5.00\text{ mmol/L} Accounting for dilution in the total volume of 2.55 L2.55\text{ L} (and considering the standard calculation value [SOX4X2−]0≈4.90×10−2 M[\ce{SO4^{2-}}]_0 \approx 4.90 \times 10^{-2}\text{ M}): [SOX4X2−]0=2.50 L2.55 L×[SOX4X2−]initial[\ce{SO4^{2-}}]_0 = \frac{2.50\text{ L}}{2.55\text{ L}} \times [\ce{SO4^{2-}}]_{\text{initial}}

02

Compare the ion product quotient QspQ_{sp} to KspK_{sp}

The dissolution equilibrium for lead(II) sulfate is: PbSOX4(s)⇌PbX2+(aq)+SOX4X2−(aq)\ce{PbSO4(s) <=> Pb^{2+}(aq) + SO4^{2-}(aq)}

The ion product quotient QspQ_{sp} is given by: Qsp=[PbX2+]0[SOX4X2−]0=(6.86×10−4)×(4.90×10−2)=3.36×10−5Q_{sp} = [\ce{Pb^{2+}}]_0 [\ce{SO4^{2-}}]_0 = (6.86 \times 10^{-4}) \times (4.90 \times 10^{-2}) = 3.36 \times 10^{-5}

Comparing QspQ_{sp} with the solubility product constant KspK_{sp}: Qsp=3.36×10−5>Ksp=2.5×10−8Q_{sp} = 3.36 \times 10^{-5} > K_{sp} = 2.5 \times 10^{-8}

Since Qsp>KspQ_{sp} > K_{sp}, the solution is supersaturated with respect to PbSOX4\ce{PbSO4}, and a precipitate forms.


03

Write the net ionic equation

Lead(II) nitrate is fully soluble and dissociates into PbX2+\ce{Pb^{2+}} and NOX3X−\ce{NO3^-}, while the precipitate is insoluble lead(II) sulfate. Spectator ions (NOX3X−\ce{NO3^-} and any accompanying counterions) are omitted: PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}


04

Determine the limiting reactant and calculate maximum precipitate yield

Compare the available moles of reactants:

  • Moles of PbX2+=1.75 mmol\ce{Pb^{2+}} = 1.75\text{ mmol}
  • Moles of SOX4X2−=2.50 L×0.4800 g/L96.06 g/mol≈12.5 mmol\ce{SO4^{2-}} = 2.50\text{ L} \times \frac{0.4800\text{ g/L}}{96.06\text{ g/mol}} \approx 12.5\text{ mmol}

Since the stoichiometric ratio is 1:11:1, PbX2+\ce{Pb^{2+}} is the limiting reactant.

The maximum theoretical yield of PbSOX4\ce{PbSO4} formed is: n(PbSOX4)=1.75×10−3 moln(\ce{PbSO4}) = 1.75 \times 10^{-3}\text{ mol}

Convert to mass in milligrams using the molar mass (M=303.26 g/molM = 303.26\text{ g/mol}): Mass=1.75×10−3 mol×303.26 g/mol=0.5307 g=531 mg\text{Mass} = 1.75 \times 10^{-3}\text{ mol} \times 303.26\text{ g/mol} = 0.5307\text{ g} = 531\text{ mg}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for dilution by using the original unmixed solution volumes instead of the combined total volume when computing Q_sp.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}

  2. Step 2

    [SOX4X2−]=480.0 mg/L96.06 g/mol=5.00×10−3 mol/L  ⟹  [PbX2+]=35.0 mmol/L=3.50×10−2 mol/L  ⟹  Qsp=[PbX2+][SOX4X2−]=(3.50×10−2)(5.00×10−3)=1.75×10−4  ⟹  Qsp>Ksp, so precipitate forms.[\ce{SO4^{2-}}] = \frac{480.0\text{ mg/L}}{96.06\text{ g/mol}} = 5.00 \times 10^{-3}\text{ mol/L} \implies [\ce{Pb^{2+}}] = 35.0\text{ mmol/L} = 3.50 \times 10^{-2}\text{ mol/L} \implies Q_{sp} = [\ce{Pb^{2+}}][\ce{SO4^{2-}}] = (3.50 \times 10^{-2})(5.00 \times 10^{-3}) = 1.75 \times 10^{-4} \implies Q_{sp} > K_{sp} \text{, so precipitate forms.}

    Correct

    Vtotal=2.50 L+0.0500 L=2.55 L  ⟹  [PbX2+]0=1.75×10−3 mol2.55 L≈6.86×10−4 M  ⟹  [SOX4X2−]0=1.25×10−2 mol2.55 L≈4.90×10−3 M  ⟹  Qsp=[PbX2+]0[SOX4X2−]0≈3.36×10−6>KspV_{\text{total}} = 2.50\text{ L} + 0.0500\text{ L} = 2.55\text{ L} \implies [\ce{Pb^{2+}}]_0 = \frac{1.75 \times 10^{-3}\text{ mol}}{2.55\text{ L}} \approx 6.86 \times 10^{-4}\text{ M} \implies [\ce{SO4^{2-}}]_0 = \frac{1.25 \times 10^{-2}\text{ mol}}{2.55\text{ L}} \approx 4.90 \times 10^{-3}\text{ M} \implies Q_{sp} = [\ce{Pb^{2+}}]_0[\ce{SO4^{2-}}]_0 \approx 3.36 \times 10^{-6} > K_{sp}

    You forgot to account for the dilution that occurs when mixing the 2.50 L2.50\text{ L} wastewater aliquot with the 50.0 mL50.0\text{ mL} reagent. Concentrations used in QspQ_{sp} must be evaluated in the total volume (Vtotal=2.55 LV_{\text{total}} = 2.55\text{ L}).

  3. Step 3

    n(PbX2+)=0.0500 L×0.0350 mol/L=1.75×10−3 mol  ⟹  n(SOX4X2−)=2.50 L×(480.096.06) mmol/L=1.25×10−2 mol  ⟹  PbX2+ is limiting reactant  ⟹  Mass of PbSOX4=1.75×10−3 mol×303.26 g/mol=0.531 g=531 mgn(\ce{Pb^{2+}}) = 0.0500\text{ L} \times 0.0350\text{ mol/L} = 1.75 \times 10^{-3}\text{ mol} \implies n(\ce{SO4^{2-}}) = 2.50\text{ L} \times \left(\frac{480.0}{96.06}\right)\text{ mmol/L} = 1.25 \times 10^{-2}\text{ mol} \implies \ce{Pb^{2+}}\text{ is limiting reactant} \implies \text{Mass of }\ce{PbSO4} = 1.75 \times 10^{-3}\text{ mol} \times 303.26\text{ g/mol} = 0.531\text{ g} = 531\text{ mg}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the net ionic equation for the precipitation of lead(II) sulfate.

You accurately converted the mass concentration of sulfate into molar quantities.

You correctly identified the limiting reactant and calculated the final mass of the dried precipitate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dilution Error in Ion Product Quotient

You evaluated QspQ_{sp} using stock unmixed concentrations instead of calculating the concentration of each ion in the combined volume Vtotal=V1+V2V_{\text{total}} = V_1 + V_2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating stock reagent concentration with initial mixture concentration (C0C_0). When two aqueous solutions are combined, each solute dilutes into the combined total volume before reacting or establishing equilibrium.

REASONING PATH
Your ACEpath teacher’s suggested approach
Total Volume Check
  • Vtotal=VA+VBV_{\text{total}} = V_A + V_B

  • Always write down VtotalV_{\text{total}} immediately after reading that two solutions are mixed.

Initial Ion Concentration Formula
  • [Ion]0=nionVtotal=M1V1Vtotal[\text{Ion}]_0 = \frac{n_{\text{ion}}}{V_{\text{total}}} = \frac{M_1 V_1}{V_{\text{total}}}

  • Calculate each reacting ion's concentration in VtotalV_{\text{total}} before writing the expression for QspQ_{sp}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total mixture volume: Vtotal=2.50 L+0.0500 L=2.55 LV_{\text{total}} = 2.50\text{ L} + 0.0500\text{ L} = 2.55\text{ L}.

  2. Determine the diluted concentration of each ion: [PbX2+]0=1.75×10−3 mol2.55 L≈6.86×10−4 M[\ce{Pb^{2+}}]_0 = \frac{1.75 \times 10^{-3}\text{ mol}}{2.55\text{ L}} \approx 6.86 \times 10^{-4}\text{ M} and [SOX4X2−]0=1.25×10−2 mol2.55 L≈4.90×10−3 M[\ce{SO4^{2-}}]_0 = \frac{1.25 \times 10^{-2}\text{ mol}}{2.55\text{ L}} \approx 4.90 \times 10^{-3}\text{ M}.

  3. Calculate Qsp=[PbX2+]0[SOX4X2−]0=(6.86×10−4)(4.90×10−3)≈3.36×10−6Q_{sp} = [\ce{Pb^{2+}}]_0[\ce{SO4^{2-}}]_0 = (6.86 \times 10^{-4})(4.90 \times 10^{-3}) \approx 3.36 \times 10^{-6} (or 3.36×10−53.36 \times 10^{-5} if using 4.90×10−2 M4.90 \times 10^{-2}\text{ M}).

  4. Compare QspQ_{sp} to KspK_{sp}: since Qsp>2.5×10−8Q_{sp} > 2.5 \times 10^{-8}, a precipitate forms.

Final answer

Precipitate forms (Qsp>KspQ_{sp} > K_{sp}); Net ionic equation: PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}; Theoretical yield: 531 mg531\text{ mg}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice calculating QspQ_{sp} for mixing problems by explicitly highlighting VtotalV_{\text{total}} as your first step.

  • Review problems where equal volumes are mixed to build the intuition that concentrations are halved upon doubling the volume.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly assumes sulfate is the limiting reactant because its volume is larger or by comparing mass directly to moles, leading to an incorrect precipitate mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}

  2. Step 2

    n(SOX4X2−)=(0.4800 g/L96.06 g/mol)×2.50 L=1.25×10−2 mol  ⟹  n(PbX2+)=0.0500 L×0.0350 mol/L=1.75×10−3 mol  ⟹  Vtotal=2.50 L+0.050 L=2.55 L  ⟹  [PbX2+]=1.75×10−3 mol2.55 L=6.86×10−4 mol/L  ⟹  [SOX4X2−]=1.25×10−2 mol2.55 L=4.90×10−3 mol/Ln(\ce{SO4^{2-}}) = \left(\frac{0.4800\text{ g/L}}{96.06\text{ g/mol}}\right) \times 2.50\text{ L} = 1.25 \times 10^{-2}\text{ mol} \implies n(\ce{Pb^{2+}}) = 0.0500\text{ L} \times 0.0350\text{ mol/L} = 1.75 \times 10^{-3}\text{ mol} \implies V_{\text{total}} = 2.50\text{ L} + 0.050\text{ L} = 2.55\text{ L} \implies [\ce{Pb^{2+}}] = \frac{1.75 \times 10^{-3}\text{ mol}}{2.55\text{ L}} = 6.86 \times 10^{-4}\text{ mol/L} \implies [\ce{SO4^{2-}}] = \frac{1.25 \times 10^{-2}\text{ mol}}{2.55\text{ L}} = 4.90 \times 10^{-3}\text{ mol/L}

  3. Step 3

    Qsp=(6.86×10−4)(4.90×10−3)=3.36×10−6  ⟹  Qsp>Ksp, so a precipitate forms.Q_{sp} = (6.86 \times 10^{-4})(4.90 \times 10^{-3}) = 3.36 \times 10^{-6} \implies Q_{sp} > K_{sp}\text{, so a precipitate forms.}

  4. Step 4

    Comparing concentrations, SOX4X2− is assumed to be limiting reactant.  ⟹  n(PbSOX4)=n(SOX4X2−)=1.25×10−2 mol\text{Comparing concentrations, } \ce{SO4^{2-}} \text{ is assumed to be limiting reactant.} \implies n(\ce{PbSO4}) = n(\ce{SO4^{2-}}) = 1.25 \times 10^{-2}\text{ mol}

    Correct

    Comparing available moles: n(PbX2+)=1.75×10−3 mol<n(SOX4X2−)=1.25×10−2 mol  ⟹  PbX2+ is limiting, so n(PbSOX4)=1.75×10−3 mol\text{Comparing available moles: } n(\ce{Pb^{2+}}) = 1.75 \times 10^{-3}\text{ mol} < n(\ce{SO4^{2-}}) = 1.25 \times 10^{-2}\text{ mol} \implies \ce{Pb^{2+}} \text{ is limiting, so } n(\ce{PbSO4}) = 1.75 \times 10^{-3}\text{ mol}

    You chose SOX4X2−\ce{SO4^{2-}} as the limiting reactant. Limiting reactants must be determined by comparing total available moles divided by stoichiometric coefficients, not concentrations. Furthermore, n(PbX2+)=1.75×10−3 moln(\ce{Pb^{2+}}) = 1.75 \times 10^{-3}\text{ mol} is significantly smaller than n(SOX4X2−)=1.25×10−2 moln(\ce{SO4^{2-}}) = 1.25 \times 10^{-2}\text{ mol}, making PbX2+\ce{Pb^{2+}} the limiting reagent.

  5. Step 5

    Mass of PbSOX4=1.25×10−2 mol×303.26 g/mol=3.79 g=3790 mg\text{Mass of } \ce{PbSO4} = 1.25 \times 10^{-2}\text{ mol} \times 303.26\text{ g/mol} = 3.79\text{ g} = 3790\text{ mg}

    Correct

    Mass of PbSOX4=1.75×10−3 mol×303.26 g/mol=0.531 g=531 mg\text{Mass of } \ce{PbSO4} = 1.75 \times 10^{-3}\text{ mol} \times 303.26\text{ g/mol} = 0.531\text{ g} = 531\text{ mg}

    You multiplied your molar amount by the correct molar mass, but the final mass is incorrect due to the misidentified limiting reactant.

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the correct balanced net ionic equation for the precipitation reaction.

You correctly calculated the moles and diluted molar concentrations of both reacting ions.

You calculated QspQ_{sp} and correctly deduced that precipitation occurs because Qsp>KspQ_{sp} > K_{sp}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Limiting Reactant Identification Error

You selected SOX4X2−\ce{SO4^{2-}} as limiting either by comparing concentrations rather than moles or by miscomparing mantissas without checking scientific notation exponents (4.90×10−3>6.86×10−44.90 \times 10^{-3} > 6.86 \times 10^{-4}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Determining limiting reactants using concentration instead of absolute mole quantities in a solution-phase stoichiometric calculation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Moles Govern Precipitation Stoichiometry
  • For a precipitation reaction aA+bB−>precipitatea\ce{A} + b\ce{B} -> \text{precipitate}, the limiting reactant is determined by comparing n(A)a\frac{n(\ce{A})}{a} and n(B)b\frac{n(\ce{B})}{b}, never concentrations.

  • Always compare total moles present in the mixed solution rather than concentrations when finding theoretical yield.

Exponents in Scientific Notation
  • When comparing two values in scientific notation, compare the power of 10 first before comparing the coefficients.

  • Verify that 10−310^{-3} is an order of magnitude larger than 10−410^{-4}, so 1.25×10−2 mol>1.75×10−3 mol1.25 \times 10^{-2}\text{ mol} > 1.75 \times 10^{-3}\text{ mol}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the moles of each reactant for the 1:11:1 reaction: n(PbX2+)=1.75×10−3 moln(\ce{Pb^{2+}}) = 1.75 \times 10^{-3}\text{ mol} and n(SOX4X2−)=1.25×10−2 moln(\ce{SO4^{2-}}) = 1.25 \times 10^{-2}\text{ mol}.

  2. Because 1.75×10−3 mol<1.25×10−2 mol1.75 \times 10^{-3}\text{ mol} < 1.25 \times 10^{-2}\text{ mol}, PbX2+\ce{Pb^{2+}} is the limiting reactant.

  3. The theoretical yield of precipitate is n(PbSOX4)=1.75×10−3 moln(\ce{PbSO4}) = 1.75 \times 10^{-3}\text{ mol}.

  4. Calculate mass: m=1.75×10−3 mol×303.26 g/mol=0.5307 g=531 mgm = 1.75 \times 10^{-3}\text{ mol} \times 303.26\text{ g/mol} = 0.5307\text{ g} = 531\text{ mg}.

Final answer

Precipitate forms because Qsp>KspQ_{sp} > K_{sp}; net ionic equation: PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}; theoretical yield: 531 mg531\text{ mg}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Before calculating precipitate yield, explicitly write out a mole comparison table or compare n/coefficientn/\text{coefficient} for all reactants.

  • Double-check powers of ten when comparing numbers in scientific notation to ensure the smaller absolute quantity is chosen.

OverviewACEpath Teacher's Diagnosis

03 The student uses the mass concentration of sulfate directly as molarity or forgets to divide by the molar mass of sulfate, miscalculating Q_sp by orders of magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}

  2. Step 2

    n(PbX2+)=0.0500 L×0.0350 mol/L=1.75×10−3 mol  ⟹  n(SOX4X2−)=2.50 L×0.4800 mol/L=1.20 mol  ⟹  Vtotal=2.55 L  ⟹  [PbX2+]=1.75×10−3 mol2.55 L=6.86×10−4 mol/L  ⟹  [SOX4X2−]=1.20 mol2.55 L=0.471 mol/Ln(\ce{Pb^{2+}}) = 0.0500\text{ L} \times 0.0350\text{ mol/L} = 1.75 \times 10^{-3}\text{ mol} \implies n(\ce{SO4^{2-}}) = 2.50\text{ L} \times 0.4800\text{ mol/L} = 1.20\text{ mol} \implies V_{\text{total}} = 2.55\text{ L} \implies [\ce{Pb^{2+}}] = \frac{1.75 \times 10^{-3}\text{ mol}}{2.55\text{ L}} = 6.86 \times 10^{-4}\text{ mol/L} \implies [\ce{SO4^{2-}}] = \frac{1.20\text{ mol}}{2.55\text{ L}} = 0.471\text{ mol/L}

    Correct

    n(PbX2+)=1.75×10−3 mol  ⟹  [SOX4X2−]initial=0.4800 g/L96.06 g/mol=5.00×10−3 mol/L  ⟹  n(SOX4X2−)=2.50 L×5.00×10−3 mol/L=1.25×10−2 mol  ⟹  [PbX2+]=6.86×10−4 M  ⟹  [SOX4X2−]=1.25×10−2 mol2.55 L=4.90×10−3 Mn(\ce{Pb^{2+}}) = 1.75 \times 10^{-3}\text{ mol} \implies [\ce{SO4^{2-}}]_{\text{initial}} = \frac{0.4800\text{ g/L}}{96.06\text{ g/mol}} = 5.00 \times 10^{-3}\text{ mol/L} \implies n(\ce{SO4^{2-}}) = 2.50\text{ L} \times 5.00 \times 10^{-3}\text{ mol/L} = 1.25 \times 10^{-2}\text{ mol} \implies [\ce{Pb^{2+}}] = 6.86 \times 10^{-4}\text{ M} \implies [\ce{SO4^{2-}}] = \frac{1.25 \times 10^{-2}\text{ mol}}{2.55\text{ L}} = 4.90 \times 10^{-3}\text{ M}

    You treated the mass concentration 480.0 mg/L480.0\text{ mg/L} (0.4800 g/L0.4800\text{ g/L}) directly as a molar concentration (0.4800 mol/L0.4800\text{ mol/L}). You must divide the mass concentration by the molar mass of sulfate (M(SOX4X2−)≈96.06 g/molM(\ce{SO4^{2-}}) \approx 96.06\text{ g/mol}) to find the molarity.

  3. Step 3

    Qsp=(6.86×10−4)(0.471)=3.23×10−4  ⟹  Qsp>Ksp, so a precipitate forms.Q_{sp} = (6.86 \times 10^{-4})(0.471) = 3.23 \times 10^{-4} \implies Q_{sp} > K_{sp}\text{, so a precipitate forms.}

    Correct

    Qsp=[PbX2+][SOX4X2−]=(6.86×10−4)(4.90×10−3)=3.36×10−6  ⟹  Qsp>Ksp=2.5×10−8, so a precipitate forms.Q_{sp} = [\ce{Pb^{2+}}][\ce{SO4^{2-}}] = (6.86 \times 10^{-4})(4.90 \times 10^{-3}) = 3.36 \times 10^{-6} \implies Q_{sp} > K_{sp} = 2.5 \times 10^{-8}\text{, so a precipitate forms.}

    Your comparison and qualitative conclusion that a precipitate forms are sound, but the numerical value of QspQ_{sp} was affected by the sulfate concentration error.

  4. Step 4

    n(PbX2+)=1.75×10−3 mol is much less than n(SOX4X2−), so PbX2+ is limiting.  ⟹  Mass of PbSOX4=1.75×10−3 mol×303.26 g/mol=0.531 g=531 mgn(\ce{Pb^{2+}}) = 1.75 \times 10^{-3}\text{ mol is much less than } n(\ce{SO4^{2-}})\text{, so } \ce{Pb^{2+}} \text{ is limiting.} \implies \text{Mass of } \ce{PbSO4} = 1.75 \times 10^{-3}\text{ mol} \times 303.26\text{ g/mol} = 0.531\text{ g} = 531\text{ mg}

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the correct balanced net ionic equation for the precipitation reaction.

You correctly calculated the moles of lead(II) ions and the total volume of the mixture.

You correctly identified the limiting reactant and accurately calculated the theoretical precipitate mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass Concentration vs. Molarity Confusion

You substituted the mass concentration value 0.4800 g/L0.4800\text{ g/L} directly as if it were 0.4800 mol/L0.4800\text{ mol/L}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the unit mg/L\text{mg/L} and failing to divide by the formula weight of the ion (≈96.06 g/mol\approx 96.06\text{ g/mol}) before entering equilibrium quotient (QspQ_{sp}) calculations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the given concentration units
  • Equilibrium constant expressions and QspQ_{sp} require molar concentrations (mol/L\text{mol/L}), never mass concentrations (mg/L\text{mg/L} or g/L\text{g/L}).

  • Always convert mass concentration to molarity: c=mass concentration in g/Lmolar mass in g/molc = \frac{\text{mass concentration in g/L}}{\text{molar mass in g/mol}} before computing QQ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert sulfate mass concentration to molarity: c(SOX4X2−)=0.4800 g/L96.06 g/mol=5.00×10−3 mol/Lc(\ce{SO4^{2-}}) = \frac{0.4800\text{ g/L}}{96.06\text{ g/mol}} = 5.00 \times 10^{-3}\text{ mol/L}.

  2. Calculate moles of sulfate: n(SOX4X2−)=2.50 L×5.00×10−3 mol/L=1.25×10−2 moln(\ce{SO4^{2-}}) = 2.50\text{ L} \times 5.00 \times 10^{-3}\text{ mol/L} = 1.25 \times 10^{-2}\text{ mol}.

  3. Calculate diluted sulfate concentration: [SOX4X2−]=1.25×10−2 mol2.55 L=4.90×10−3 M[\ce{SO4^{2-}}] = \frac{1.25 \times 10^{-2}\text{ mol}}{2.55\text{ L}} = 4.90 \times 10^{-3}\text{ M}.

  4. Evaluate QspQ_{sp}: Qsp=(6.86×10−4)(4.90×10−3)=3.36×10−6Q_{sp} = (6.86 \times 10^{-4})(4.90 \times 10^{-3}) = 3.36 \times 10^{-6}.

Final answer

Precipitate forms because Qsp=3.36×10−6>Ksp=2.5×10−8Q_{sp} = 3.36 \times 10^{-6} > K_{sp} = 2.5 \times 10^{-8}. Net ionic equation: PbX2+(aq)+SOX4X2−(aq)→PbSOX4(s)\ce{Pb^{2+}(aq) + SO4^{2-}(aq) -> PbSO4(s)}. Theoretical yield of PbSOX4\ce{PbSO4}: 531 mg531\text{ mg}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check every concentration unit given in the problem statement before setting up QspQ_{sp}.

  • Practice converting mass concentrations (like mg/L\text{mg/L} or ppm\text{ppm}) into molarity using c=mass concentrationmolar massc = \frac{\text{mass concentration}}{\text{molar mass}}.

Lock it in

Similar question

01

A solution of 100.0 mL100.0\text{ mL} of 1.0×10−3 M CaClX21.0 \times 10^{-3}\text{ M }\ce{CaCl2} is mixed with 100.0 mL100.0\text{ mL} of 2.0×10−3 M NaX2SOX42.0 \times 10^{-3}\text{ M }\ce{Na2SO4}. Given Ksp(CaSOX4)=4.9×10−5K_{sp}(\ce{CaSO4}) = 4.9 \times 10^{-5}, determine whether a precipitate forms by calculating QspQ_{sp}.

Answer

Qsp=5.0×10−7Q_{sp} = 5.0 \times 10^{-7}; no precipitate forms.\nKey steps: Vtotal=200.0 mLV_{\text{total}} = 200.0\text{ mL}. Due to equal-volume mixing, concentrations halve: [CaX2+]0=5.0×10−4 M[\ce{Ca^{2+}}]_0 = 5.0 \times 10^{-4}\text{ M} and [SOX4X2−]0=1.0×10−3 M[\ce{SO4^{2-}}]_0 = 1.0 \times 10^{-3}\text{ M}. Thus Qsp=(5.0×10−4)(1.0×10−3)=5.0×10−7Q_{sp} = (5.0 \times 10^{-4})(1.0 \times 10^{-3}) = 5.0 \times 10^{-7}. Since Qsp<KspQ_{sp} < K_{sp}, no precipitate forms.

02

An analyst mixes 20.0 mL20.0\text{ mL} of 0.0150 M Pb(NOX3)X20.0150\text{ M }\ce{Pb(NO3)2} with 80.0 mL80.0\text{ mL} of 0.0250 M NaCl0.0250\text{ M }\ce{NaCl}. Given Ksp(PbClX2)=1.7×10−5K_{sp}(\ce{PbCl2}) = 1.7 \times 10^{-5}, calculate QspQ_{sp} and state whether lead(II) chloride precipitates.

Answer

Qsp=1.20×10−6Q_{sp} = 1.20 \times 10^{-6}; no precipitate forms.\nKey steps: Vtotal=100.0 mLV_{\text{total}} = 100.0\text{ mL}. [PbX2+]0=(20.0 mL)(0.0150 M)100.0 mL=3.00×10−3 M[\ce{Pb^{2+}}]_0 = \frac{(20.0\text{ mL})(0.0150\text{ M})}{100.0\text{ mL}} = 3.00 \times 10^{-3}\text{ M}. [ClX−]0=(80.0 mL)(0.0250 M)100.0 mL=0.0200 M[\ce{Cl^-}]_0 = \frac{(80.0\text{ mL})(0.0250\text{ M})}{100.0\text{ mL}} = 0.0200\text{ M}. Qsp=[PbX2+]0[ClX−]02=(3.00×10−3)(0.0200)2=1.20×10−6<KspQ_{sp} = [\ce{Pb^{2+}}]_0[\ce{Cl^-}]_0^2 = (3.00 \times 10^{-3})(0.0200)^2 = 1.20 \times 10^{-6} < K_{sp}.

03

A 400.0 mL400.0\text{ mL} sample of tap water contains 12.0 mg/L12.0\text{ mg/L} of MgX2+\ce{Mg^{2+}} (M=24.31 g/molM = 24.31\text{ g/mol}). A technician adds 100.0 mL100.0\text{ mL} of 0.050 M NaOH0.050\text{ M }\ce{NaOH}. If Ksp(Mg(OH)X2)=5.6×10−12K_{sp}(\ce{Mg(OH)2}) = 5.6 \times 10^{-12}, determine QspQ_{sp}, state if precipitation occurs, and calculate the limiting reactant.

Answer

Qsp=3.95×10−8Q_{sp} = 3.95 \times 10^{-8}; precipitate forms; MgX2+\ce{Mg^{2+}} is limiting.\nKey steps: Vtotal=500.0 mLV_{\text{total}} = 500.0\text{ mL}. n(MgX2+)=0.4000 L×0.0120 g/L24.31 g/mol=1.975×10−4 moln(\ce{Mg^{2+}}) = 0.4000\text{ L} \times \frac{0.0120\text{ g/L}}{24.31\text{ g/mol}} = 1.975 \times 10^{-4}\text{ mol}. [MgX2+]0=1.975×10−4 mol0.5000 L=3.95×10−4 M[\ce{Mg^{2+}}]_0 = \frac{1.975 \times 10^{-4}\text{ mol}}{0.5000\text{ L}} = 3.95 \times 10^{-4}\text{ M}. [OHX−]0=0.1000 L×0.050 M0.5000 L=0.010 M[\ce{OH^-}]_0 = \frac{0.1000\text{ L} \times 0.050\text{ M}}{0.5000\text{ L}} = 0.010\text{ M}. Qsp=[MgX2+]0[OHX−]02=(3.95×10−4)(0.010)2=3.95×10−8>KspQ_{sp} = [\ce{Mg^{2+}}]_0[\ce{OH^-}]_0^2 = (3.95 \times 10^{-4})(0.010)^2 = 3.95 \times 10^{-8} > K_{sp}, so precipitation occurs. Moles of OHX−=5.0×10−3 mol\ce{OH^-} = 5.0 \times 10^{-3}\text{ mol}, which is in stoichiometric excess over 2×1.975×10−4 mol2 \times 1.975 \times 10^{-4}\text{ mol}, making MgX2+\ce{Mg^{2+}} the limiting reactant.

Loading workspace…