Resources

A student measures the vapor pressure of an organic solvent at two temperatures: T1=300.0 KT_1 = 300.0\text{ K} (P1=100.0 mmHgP_1 = 100.0\text{ mmHg}) and T2=350.0 KT_2 = 350.0\text{ K} (P2=450.0 mmHgP_2 = 450.0\text{ mmHg}). The student applies the two-point Clausius-Clapeyron formula but inadvertently writes the temperature difference as (T2−T1)(T_2 - T_1) in the numerator instead of (1T1−1T2)\left(\frac{1}{T_1} - \frac{1}{T_2}\right), yielding an unphysical negative value with incorrect dimensions. Calculate the correct, physically valid standard enthalpy of vaporization ΔHvap\Delta H_{\text{vap}} in kJ/mol\text{kJ/mol} using R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, ensuring all signs and inverse-temperature conventions are strictly preserved.

Answer and steps

Final answer

26.2 kJ/mol26.2\text{ kJ/mol}

Steps

01

Identify the Clausius-Clapeyron Equation

The two-point form of the Clausius-Clapeyron equation relates the vapor pressures P1P_1 and P2P_2 at two absolute temperatures T1T_1 and T2T_2 to the standard enthalpy of vaporization ΔHvap\Delta H_{\text{vap}}:

ln⁡(P2P1)=−ΔHvapR(1T2−1T1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)

Rearranging to solve directly for ΔHvap\Delta H_{\text{vap}}:

ΔHvap=Rln⁡(P2P1)1T1−1T2\Delta H_{\text{vap}} = \frac{R \ln\left(\frac{P_2}{P_1}\right)}{\frac{1}{T_1} - \frac{1}{T_2}}

Common Pitfall: A frequent error is replacing the difference in inverse temperatures (1T1−1T2)\left(\frac{1}{T_1} - \frac{1}{T_2}\right) with the simple temperature difference (T2−T1)(T_2 - T_1) or (T1−T2)(T_1 - T_2). This introduces an incorrect unit (K\text{K} instead of K−1\text{K}^{-1}) and yields an incorrect magnitude and sign.


02

Substitute the Given Values

The given parameters are:

  • T1=300.0 KT_1 = 300.0\text{ K}, P1=100.0 mmHgP_1 = 100.0\text{ mmHg}
  • T2=350.0 KT_2 = 350.0\text{ K}, P2=450.0 mmHgP_2 = 450.0\text{ mmHg}
  • R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}

Note: Because the ratio P2P1\frac{P_2}{P_1} is dimensionless, the pressure units cancel directly, so converting mmHg\text{mmHg} to atmospheres or pascals is not required.

  1. Calculate the pressure ratio and its natural logarithm: P2P1=450.0 mmHg100.0 mmHg=4.500\frac{P_2}{P_1} = \frac{450.0\text{ mmHg}}{100.0\text{ mmHg}} = 4.500 ln⁡(4.500)≈1.5041\ln(4.500) \approx 1.5041
  2. Calculate the difference of inverse temperatures: 1T1−1T2=1300.0 K−1350.0 K=350.0−300.0300.0×350.0 K−1=50.0105000 K−1≈4.762×10−4 K−1\frac{1}{T_1} - \frac{1}{T_2} = \frac{1}{300.0\text{ K}} - \frac{1}{350.0\text{ K}} = \frac{350.0 - 300.0}{300.0 \times 350.0}\text{ K}^{-1} = \frac{50.0}{105000}\text{ K}^{-1} \approx 4.762 \times 10^{-4}\text{ K}^{-1}

03

Calculate ΔHvap\Delta H_{\text{vap}}

Substitute these values into the rearranged equation:

ΔHvap=8.314 J/(mol⋅K)×1.50414.762×10−4 K−1≈26260 J/mol\Delta H_{\text{vap}} = \frac{8.314\text{ J/(mol}\cdot\text{K)} \times 1.5041}{4.762 \times 10^{-4}\text{ K}^{-1}} \approx 26260\text{ J/mol}

Convert from J/mol\text{J/mol} to kJ/mol\text{kJ/mol}:

ΔHvap=26260 J/mol1000 J/kJ≈26.2 kJ/mol\Delta H_{\text{vap}} = \frac{26260\text{ J/mol}}{1000\text{ J/kJ}} \approx 26.2\text{ kJ/mol}

The positive sign confirms an endothermic vaporization process, consistent with physical principles.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student reverses the order of reciprocal temperatures as (1/T2 - 1/T1) without including the negative sign in the Clausius-Clapeyron formula, resulting in a negative enthalpy of vaporization.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ln⁡(P2/P1)=(ΔHvapR)⋅(1T2−1T1)\ln(P_2/P_1) = \left(\frac{\Delta H_{\text{vap}}}{R}\right) \cdot \left(\frac{1}{T_2} - \frac{1}{T_1}\right)

    Correct

    ln⁡(P2P1)=−ΔHvapR(1T2−1T1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)

    You omitted the leading minus sign when pairing ln⁡(P2/P1)\ln(P_2/P_1) with the temperature difference (1/T2−1/T1)(1/T_2 - 1/T_1). Because T2>T1T_2 > T_1, the term (1/T2−1/T1)(1/T_2 - 1/T_1) is negative, requiring a negative sign in front to ensure ΔHvap\Delta H_{\text{vap}} is positive.

  2. Step 2

    ln⁡(450.0/100.0)=ΔHvap8.314⋅(1350.0−1300.0)  ⟹  1.5041=ΔHvap8.314⋅(−0.0004762)\ln(450.0/100.0) = \frac{\Delta H_{\text{vap}}}{8.314} \cdot \left(\frac{1}{350.0} - \frac{1}{300.0}\right) \implies 1.5041 = \frac{\Delta H_{\text{vap}}}{8.314} \cdot (-0.0004762)

    Correct

    1.5041=ΔHvap8.314⋅(0.0004762)1.5041 = \frac{\Delta H_{\text{vap}}}{8.314} \cdot (0.0004762)

    You substituted the numerical values and evaluated the natural logarithm accurately, but this step inherited the inverted temperature difference from Step 1.

  3. Step 3

    ΔHvap=−26261 J/mol=−26.3 kJ/mol\Delta H_{\text{vap}} = -26261\text{ J/mol} = -26.3\text{ kJ/mol}

    Correct

    ΔHvap=2.62×104 J/mol=26.2 kJ/mol\Delta H_{\text{vap}} = 2.62 \times 10^4\text{ J/mol} = 26.2\text{ kJ/mol}

    You solved the equation correctly based on your intermediate values, but the final sign is unphysical because vaporization is always an endothermic process (ΔHvap>0\Delta H_{\text{vap}} > 0).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the natural logarithm of the vapor pressure ratio ln⁡(450.0/100.0)≈1.5041\ln(450.0/100.0) \approx 1.5041.

You used the correct gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} and handled unit conversion from J/mol\text{J/mol} to kJ/mol\text{kJ/mol} accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Sign Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the reciprocal temperature difference (1/T2−1/T1)(1/T_2 - 1/T_1) without including the necessary negative sign in the Clausius-Clapeyron equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Clausius-Clapeyron sign convention
  • ln⁡(P2P1)=−ΔHvapR(1T2−1T1)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) or ln⁡(P2P1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)

  • Pair subscript order 2/12/1 in the logarithm with either a negative sign and (1/T2−1/T1)(1/T_2 - 1/T_1), or a positive sign and (1/T1−1/T2)(1/T_1 - 1/T_2).

Physical reality check on $\Delta H_{\text{vap}}$
  • Phase change from liquid to gas requires absorbing heat, so ΔHvap\Delta H_{\text{vap}} must always be strictly positive.

  • If your calculated ΔHvap\Delta H_{\text{vap}} is negative, immediately review the signs and index ordering in your temperature difference.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard two-point form with the correct sign: ln⁡(P2P1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right).

  2. Substitute the given values: 1.5041=ΔHvap8.314(1300.0−1350.0)=ΔHvap8.314(4.762×10−4)1.5041 = \frac{\Delta H_{\text{vap}}}{8.314}\left(\frac{1}{300.0} - \frac{1}{350.0}\right) = \frac{\Delta H_{\text{vap}}}{8.314}(4.762 \times 10^{-4}).

  3. Solve for ΔHvap\Delta H_{\text{vap}}: ΔHvap=1.5041×8.3144.762×10−4≈26260 J/mol≈26.2 kJ/mol\Delta H_{\text{vap}} = \frac{1.5041 \times 8.314}{4.762 \times 10^{-4}} \approx 26260\text{ J/mol} \approx 26.2\text{ kJ/mol}.

Final answer

26.2 kJ/mol26.2\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the two-point Clausius-Clapeyron formula by linking the positive sign directly to the reversed temperature order: ln⁡(P2/P1)=(ΔHvap/R)(1/T1−1/T2)\ln(P_2/P_1) = (\Delta H_{\text{vap}}/R)(1/T_1 - 1/T_2).

  • Always perform a physical sanity check: vaporization is endothermic, so ΔHvap\Delta H_{\text{vap}} must be positive.

OverviewACEpath Teacher's Diagnosis

02 The student calculates ΔHvap correctly in joules per mole but forgets to convert the final answer to kilojoules per mole as requested.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ln⁡(P2P1)=ΔHvapR⋅(1T1−1T2)  ⟹  ln⁡(450.0100.0)=ΔHvap8.314⋅(1300.0−1350.0)\ln\left(\frac{P_2}{P_1}\right) = \frac{\Delta H_{\text{vap}}}{R} \cdot \left(\frac{1}{T_1} - \frac{1}{T_2}\right) \implies \ln\left(\frac{450.0}{100.0}\right) = \frac{\Delta H_{\text{vap}}}{8.314} \cdot \left(\frac{1}{300.0} - \frac{1}{350.0}\right)

  2. Step 2

    1.5041=ΔHvap8.314⋅0.00047621.5041 = \frac{\Delta H_{\text{vap}}}{8.314} \cdot 0.0004762

  3. Step 3

    ΔHvap=26261 J/mol\Delta H_{\text{vap}} = 26261\text{ J/mol}

    Correct

    ΔHvap=26.2 kJ/mol\Delta H_{\text{vap}} = 26.2\text{ kJ/mol}

    You calculated the magnitude in joules per mole correctly, but the question specifically requested the enthalpy of vaporization in kJ/mol\text{kJ/mol}.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct reciprocal temperature difference form (1T1−1T2)\left(\frac{1}{T_1} - \frac{1}{T_2}\right) instead of the common subtraction pitfall.

You matched pressures and temperatures to the correct thermodynamic states.

You carried out the intermediate arithmetic and algebra with high precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing unit conversion

You stopped calculating as soon as you isolated the numeric value from the gas constant without converting the base energy unit from joules to kilojoules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Because the ideal gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} naturally produces energies in J/mol\text{J/mol}, calculating enthalpy requires an explicit final division by 10001000 whenever standard thermodynamic units (kJ/mol\text{kJ/mol}) are requested.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Output Units of Constants
  • Using R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} always yields an enthalpy in J/mol\text{J/mol}.

  • Always append units through every algebraic manipulation to monitor the base dimension.

Prompt Unit Verification
  • Thermodynamic state functions like ΔHvap\Delta H_{\text{vap}} are typically reported in kJ/mol\text{kJ/mol}.

  • Divide the value in J/mol\text{J/mol} by 1000 J/kJ1000\text{ J/kJ} before boxing your final answer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the enthalpy calculated from the gas law: ΔHvap=26260 J/mol\Delta H_{\text{vap}} = 26260\text{ J/mol}.

  2. Convert from joules to kilojoules using the factor 1 kJ=1000 J1\text{ kJ} = 1000\text{ J}: ΔHvap=26260 J/mol1000 J/kJ=26.26 kJ/mol\Delta H_{\text{vap}} = \frac{26260\text{ J/mol}}{1000\text{ J/kJ}} = 26.26\text{ kJ/mol}.

  3. Round to three significant figures to match the given data.

Final answer

ΔHvap=26.2 kJ/mol\Delta H_{\text{vap}} = 26.2\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write target units next to the unknown variable at the very start of your scratch work (e.g., 'ΔHvap=? kJ/mol\Delta H_{\text{vap}} = \text{? kJ/mol}').

  • Perform a final dimension check against the prompt before submitting your result.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the reciprocal temperature subtraction into 1/(T2 - T1), misunderstanding how to evaluate the difference of inverse temperatures.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ln⁡(P2P1)=ΔHvapR⋅1T2−T1\ln\left(\frac{P_2}{P_1}\right) = \frac{\Delta H_{\text{vap}}}{R} \cdot \frac{1}{T_2 - T_1}

    Correct

    ln⁡(P2P1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)

    You substituted 1T2−T1\frac{1}{T_2 - T_1} for the temperature term. In the integrated Clausius-Clapeyron equation, the term is the difference between two reciprocals, 1T1−1T2\frac{1}{T_1} - \frac{1}{T_2}, which is not mathematically equal to 1T2−T1\frac{1}{T_2 - T_1}.

  2. Step 2

    ln⁡(450.0100.0)=ΔHvap8.314⋅(1350.0−300.0)  ⟹  1.5041=ΔHvap8.314⋅150.0\ln\left(\frac{450.0}{100.0}\right) = \frac{\Delta H_{\text{vap}}}{8.314} \cdot \left(\frac{1}{350.0 - 300.0}\right) \implies 1.5041 = \frac{\Delta H_{\text{vap}}}{8.314} \cdot \frac{1}{50.0}

    Correct

    1.5041=ΔHvap8.314⋅(1300.0−1350.0)  ⟹  1.5041=ΔHvap8.314⋅(4.762×10−4 K−1)1.5041 = \frac{\Delta H_{\text{vap}}}{8.314} \cdot \left(\frac{1}{300.0} - \frac{1}{350.0}\right) \implies 1.5041 = \frac{\Delta H_{\text{vap}}}{8.314} \cdot (4.762 \times 10^{-4}\text{ K}^{-1})

    You correctly calculated ln⁡(4.500)≈1.5041\ln(4.500) \approx 1.5041, but substituting into the incorrect temperature term carried the error forward.

  3. Step 3

    ΔHvap=1.5041⋅8.314⋅50.0=625.3 J/mol=0.625 kJ/mol\Delta H_{\text{vap}} = 1.5041 \cdot 8.314 \cdot 50.0 = 625.3\text{ J/mol} = 0.625\text{ kJ/mol}

    Correct

    ΔHvap=1.5041×8.3144.762×10−4 K−1≈26260 J/mol=26.2 kJ/mol\Delta H_{\text{vap}} = \frac{1.5041 \times 8.314}{4.762 \times 10^{-4}\text{ K}^{-1}} \approx 26260\text{ J/mol} = 26.2\text{ kJ/mol}

    You correctly executed the arithmetic and the conversion from J/mol\text{J/mol} to kJ/mol\text{kJ/mol}, but the numerical answer is incorrect due to the initial formula error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the natural logarithm of the vapor pressure ratio, ln⁡(4.500)≈1.5041\ln(4.500) \approx 1.5041.

You correctly isolated the unknown variable using algebraic operations on your stated formula.

You properly converted the final calculated energy from J/mol\text{J/mol} to kJ/mol\text{kJ/mol}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal subtraction algebra error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the difference of reciprocals (1T1−1T2)\left(\frac{1}{T_1} - \frac{1}{T_2}\right) as the reciprocal of a difference 1T2−T1\frac{1}{T_2 - T_1}, confusing how definite integration of T−2 dTT^{-2}\,dT yields reciprocal temperature values.

REASONING PATH
Your ACEpath teacher’s suggested approach
Difference of Reciprocals vs. Reciprocal of Difference
  • For any non-zero numbers aa and bb, 1a−1b=b−aa⋅b≠1b−a\frac{1}{a} - \frac{1}{b} = \frac{b - a}{a \cdot b} \neq \frac{1}{b - a}.

  • Always evaluate 1T1\frac{1}{T_1} and 1T2\frac{1}{T_2} individually (or write T2−T1T1T2\frac{T_2 - T_1}{T_1 T_2}) before multiplying by RR.

Sign and Magnitude Sanity Check
  • Vaporization is endothermic (ΔHvap>0\Delta H_{\text{vap}} > 0). Typical standard enthalpies of vaporization for small organic solvents range from 20 kJ/mol20\text{ kJ/mol} to 50 kJ/mol50\text{ kJ/mol}.

  • When you obtain an unusually low enthalpy of vaporization like 0.625 kJ/mol0.625\text{ kJ/mol}, inspect the temperature term for missing reciprocal factors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the valid Clausius-Clapeyron equation: ln⁡(P2P1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right).

  2. Compute the reciprocal temperature difference: 1300.0 K−1350.0 K=350.0−300.0300.0×350.0 K−1=4.7619×10−4 K−1\frac{1}{300.0\text{ K}} - \frac{1}{350.0\text{ K}} = \frac{350.0 - 300.0}{300.0 \times 350.0}\text{ K}^{-1} = 4.7619 \times 10^{-4}\text{ K}^{-1}.

  3. Substitute into the rearranged formula: ΔHvap=Rln⁡(P2/P1)1T1−1T2=8.314 J/(mol⋅K)×1.50414.7619×10−4 K−1≈26260 J/mol\Delta H_{\text{vap}} = \frac{R \ln(P_2 / P_1)}{\frac{1}{T_1} - \frac{1}{T_2}} = \frac{8.314\text{ J/(mol}\cdot\text{K)} \times 1.5041}{4.7619 \times 10^{-4}\text{ K}^{-1}} \approx 26260\text{ J/mol}.

  4. Convert to kJ/mol\text{kJ/mol}: 26260 J/mol1000 J/kJ≈26.2 kJ/mol\frac{26260\text{ J/mol}}{1000\text{ J/kJ}} \approx 26.2\text{ kJ/mol}.

Final answer

26.2 kJ/mol26.2\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the two-point Clausius-Clapeyron formula in terms of explicit reciprocals: ln⁡(P2/P1)=−ΔHvapR(1T2−1T1)=ΔHvapR(1T1−1T2)\ln(P_2/P_1) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right).

  • Practice converting differences of reciprocals into the common-denominator form ΔTT1T2\frac{\Delta T}{T_1 T_2} to avoid the invalid 1ΔT\frac{1}{\Delta T} shortcut.

  • Check your calculated ΔHvap\Delta H_{\text{vap}} against typical molecular vaporization scales (usually tens of kJ/mol\text{kJ/mol}) as a quick sanity check.

Lock it in

Similar question

01

A liquid has a vapor pressure of 40.0 mmHg40.0\text{ mmHg} at 280.0 K280.0\text{ K} and 160.0 mmHg160.0\text{ mmHg} at 320.0 K320.0\text{ K}. Calculate its standard enthalpy of vaporization ΔHvap\Delta H_{\text{vap}} in kJ/mol\text{kJ/mol} using R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}.

Answer

25.9 kJ/mol25.9\text{ kJ/mol}. Step 1: ln⁡(P2/P1)=ln⁡(160.0/40.0)=ln⁡(4)≈1.3863\ln(P_2/P_1) = \ln(160.0/40.0) = \ln(4) \approx 1.3863. Step 2: 1T1−1T2=1280.0−1320.0≈4.464×10−4 K−1\frac{1}{T_1} - \frac{1}{T_2} = \frac{1}{280.0} - \frac{1}{320.0} \approx 4.464 \times 10^{-4}\text{ K}^{-1}. Step 3: ΔHvap=Rln⁡(P2/P1)1T1−1T2=8.314×1.38634.464×10−4≈25820 J/mol≈25.9 kJ/mol\Delta H_{\text{vap}} = \frac{R \ln(P_2/P_1)}{\frac{1}{T_1} - \frac{1}{T_2}} = \frac{8.314 \times 1.3863}{4.464 \times 10^{-4}} \approx 25820\text{ J/mol} \approx 25.9\text{ kJ/mol}.

02

The normal boiling point of ethanol is 351.5 K351.5\text{ K} (P1=760.0 TorrP_1 = 760.0\text{ Torr}), and its enthalpy of vaporization is ΔHvap=38.56 kJ/mol\Delta H_{\text{vap}} = 38.56\text{ kJ/mol}. What is the vapor pressure of ethanol at 300.0 K300.0\text{ K} in Torr\text{Torr}?

Answer

67.0 Torr67.0\text{ Torr}. Step 1: Use ln⁡(P2P1)=−ΔHvapR(1T2−1T1)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right). Step 2: 1T2−1T1=1300.0−1351.5≈4.884×10−4 K−1\frac{1}{T_2} - \frac{1}{T_1} = \frac{1}{300.0} - \frac{1}{351.5} \approx 4.884 \times 10^{-4}\text{ K}^{-1}. Step 3: ln⁡(P2760.0)=−385608.314×4.884×10−4≈−2.265\ln\left(\frac{P_2}{760.0}\right) = -\frac{38560}{8.314} \times 4.884 \times 10^{-4} \approx -2.265. Step 4: P2=760.0×e−2.265≈67.0 TorrP_2 = 760.0 \times e^{-2.265} \approx 67.0\text{ Torr}.

03

A researcher fits vapor pressure data to the linear Clausius-Clapeyron equation ln⁡(P)=−ΔHvapR(1T)+C\ln(P) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T}\right) + C. The resulting plot of ln⁡(P)\ln(P) versus 1/T1/T yields a best-fit line with a slope of −4250 K-4250\text{ K}. (a) Why must the slope of this plot always be negative for any substance? (b) Calculate ΔHvap\Delta H_{\text{vap}} in kJ/mol\text{kJ/mol}.

Answer

(a) Because vaporization is endothermic (ΔHvap>0\Delta H_{\text{vap}} > 0) and R>0R > 0, the slope m=−ΔHvapRm = -\frac{\Delta H_{\text{vap}}}{R} must always be strictly negative. (b) 35.3 kJ/mol35.3\text{ kJ/mol}. Since m=−ΔHvapR=−4250 Km = -\frac{\Delta H_{\text{vap}}}{R} = -4250\text{ K}, ΔHvap=4250 K×8.314 J/(mol⋅K)=35335 J/mol≈35.3 kJ/mol\Delta H_{\text{vap}} = 4250\text{ K} \times 8.314\text{ J/(mol}\cdot\text{K)} = 35335\text{ J/mol} \approx 35.3\text{ kJ/mol}.

Loading workspace…