Resources

A clinical sample contains 368 mg368\text{ mg} of dissolved calcium hydroxide, Ca(OH)2\text{Ca(OH)}_2 (molar mass =74.09 g/mol= 74.09\text{ g/mol}), in 250.0 mL250.0\text{ mL} of aqueous solution at 25.0∘C25.0^\circ\text{C}. Classify Ca(OH)2\text{Ca(OH)}_2 as a strong or weak base, convert the mass concentration into analytical molarity (CbC_b in mol/L\text{mol/L}), determine the total [OH−][\text{OH}^-] produced in solution, and calculate the resulting pOH\text{pOH} and pH\text{pH}.

Answer and steps

Final answer

Ca(OH)2\text{Ca(OH)}_2 is a strong base; analytical concentration Cb=0.0199 MC_b = 0.0199\text{ M}; [OH−]=0.0397 M[\text{OH}^-] = 0.0397\text{ M}; pOH=1.401\text{pOH} = 1.401; pH=12.599\text{pH} = 12.599

Steps

01

Base Classification

Calcium hydroxide, Ca(OH)X2\ce{Ca(OH)2}, is classified as a strong base. Although it has limited overall solubility in water, the portion that dissolves dissolves completely into its constituent ions:

Ca(OH)X2(aq)→CaX2+(aq)+2 OHX−(aq)\ce{Ca(OH)2(aq) -> Ca^2+(aq) + 2 OH^-(aq)}


02

Calculate the Analytical Molarity (CbC_b)

First, convert the given mass of Ca(OH)X2\ce{Ca(OH)2} from milligrams to grams:

m=368 mg=0.368 gm = 368\text{ mg} = 0.368\text{ g}

Next, determine the amount in moles:

n=mM=0.368 g74.09 g/mol≈4.967×10−3 moln = \frac{m}{M} = \frac{0.368\text{ g}}{74.09\text{ g/mol}} \approx 4.967 \times 10^{-3}\text{ mol}

Convert the solution volume to liters (V=250.0 mL=0.2500 LV = 250.0\text{ mL} = 0.2500\text{ L}) and find the analytical concentration:

Cb=nV=4.967×10−3 mol0.2500 L=0.01987 M≈0.0199 MC_b = \frac{n}{V} = \frac{4.967 \times 10^{-3}\text{ mol}}{0.2500\text{ L}} = 0.01987\text{ M} \approx 0.0199\text{ M}


03

Determine the Hydroxide Ion Concentration ([OHX−][\ce{OH-}])

Because each formula unit of Ca(OH)X2\ce{Ca(OH)2} releases two hydroxide ions upon complete dissociation:

[OHX−]=2⋅Cb=2⋅0.019868 M=0.039736 M≈0.0397 M[\ce{OH-}] = 2 \cdot C_b = 2 \cdot 0.019868\text{ M} = 0.039736\text{ M} \approx 0.0397\text{ M}

Common Pitfall: Forgetting the stoichiometric factor of 22 for diprotic or dihydroxy bases is a frequent error. Always write out the dissociation equation to identify the mole ratio between the parent compound and the ions released.


04

Calculate pOH\text{pOH} and pH\text{pH}

At 25.0∘C25.0^\circ\text{C}, the ion product of water gives pH+pOH=14.000\text{pH} + \text{pOH} = 14.000.

  1. Compute pOH\text{pOH}: pOH=−log⁡10[OHX−]=−log⁡10(0.039736)≈1.401\text{pOH} = -\log_{10}[\ce{OH-}] = -\log_{10}(0.039736) \approx 1.401
  2. Compute pH\text{pH}: pH=14.000−pOH=14.000−1.401=12.599\text{pH} = 14.000 - \text{pOH} = 14.000 - 1.401 = 12.599

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the 1:2 stoichiometry of Ca(OH)₂, incorrectly assuming [OH⁻] equals the base concentration C_b, which leads to an overestimated pOH and underestimated pH.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ca(OH)X2 is a strong base.\ce{Ca(OH)2}\text{ is a strong base.}

  2. Step 2

    m=0.368 g  ⟹  n=0.368 g74.09 g/mol=0.004967 mol  ⟹  Cb=0.004967 mol0.2500 L=0.01987 Mm = 0.368\text{ g} \implies n = \frac{0.368\text{ g}}{74.09\text{ g/mol}} = 0.004967\text{ mol} \implies C_b = \frac{0.004967\text{ mol}}{0.2500\text{ L}} = 0.01987\text{ M}

  3. Step 3

    [OHX−]=Cb=0.01987 M[\ce{OH-}] = C_b = 0.01987\text{ M}

    Correct

    [OHX−]=2Cb=2×0.01987 M=0.03974 M≈0.0397 M[\ce{OH-}] = 2 C_b = 2 \times 0.01987\text{ M} = 0.03974\text{ M} \approx 0.0397\text{ M}

    You set [OHX−][\ce{OH-}] equal to CbC_b, but each formula unit of Ca(OH)X2\ce{Ca(OH)2} releases two hydroxide ions upon complete dissociation: Ca(OH)X2(aq)→CaX2+(aq)+2 OHX−(aq)\ce{Ca(OH)2(aq) -> Ca^2+(aq) + 2OH^-(aq)}.

  4. Step 4

    pOH=−log⁡(0.01987)=1.70  ⟹  pH=14.00−1.70=12.30\text{pOH} = -\log(0.01987) = 1.70 \implies \text{pH} = 14.00 - 1.70 = 12.30

    Correct

    pOH=−log⁡(0.03974)=1.401  ⟹  pH=14.000−1.401=12.599\text{pOH} = -\log(0.03974) = 1.401 \implies \text{pH} = 14.000 - 1.401 = 12.599

    You applied the formulas pOH=−log⁡[OHX−]\text{pOH} = -\log[\ce{OH-}] and pH=14.00−pOH\text{pH} = 14.00 - \text{pOH} properly, but the values are shifted due to the incorrect [OHX−][\ce{OH-}] from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified calcium hydroxide as a strong base.

You converted units properly and accurately determined the molarity CbC_b.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Factor Omission in Polybasic Dissociation

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the dibasic hydroxide Ca(OH)X2\ce{Ca(OH)2} as a monobasic base, forgetting that dissociation produces 2 mol2\text{ mol} of OHX−\ce{OH-} for every 1 mol1\text{ mol} of dissolved salt.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the Dissociation Equation
  • For any metal hydroxide M(OH)n\ce{M(OH)}_n, the dissociation is M(OH)n→MXn++nOHX−\ce{M(OH)}_n\ce{ -> M^{n+} + } n\ce{OH^-}.

  • Always write out the balanced dissociation equation before setting up concentration formulas to confirm whether [OHX−]=Cb[\ce{OH-}] = C_b or [OHX−]=nCb[\ce{OH-}] = n C_b.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the dissociation: Ca(OH)X2(aq)→CaX2+(aq)+2 OHX−(aq)\ce{Ca(OH)2(aq) -> Ca^2+(aq) + 2OH^-(aq)}.

  2. Calculate hydroxide concentration: [OHX−]=2Cb=2×0.01987 M=0.03974 M[\ce{OH-}] = 2 C_b = 2 \times 0.01987\text{ M} = 0.03974\text{ M}.

  3. Compute pOH\text{pOH}: pOH=−log⁡10(0.03974)=1.401\text{pOH} = -\log_{10}(0.03974) = 1.401.

  4. Compute pH\text{pH}: pH=14.000−1.401=12.599\text{pH} = 14.000 - 1.401 = 12.599.

Final answer

Ca(OH)X2 is a strong base; Cb=0.0199 M;[OHX−]=0.0397 M;pOH=1.401;pH=12.599\ce{Ca(OH)2}\text{ is a strong base; } C_b = 0.0199\text{ M}; [\ce{OH-}] = 0.0397\text{ M}; \text{pOH} = 1.401; \text{pH} = 12.599

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the balanced ionic dissociation equation whenever dealing with Group 2 hydroxides like Ca(OH)X2\ce{Ca(OH)2}, Ba(OH)X2\ce{Ba(OH)2}, or Sr(OH)X2\ce{Sr(OH)2}.

  • Multiply the analytical concentration CbC_b by the subscript of the hydroxide group to obtain [OHX−][\ce{OH-}] before calculating pOH\text{pOH} and pH\text{pH}.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly uses milliliters directly instead of converting the volume to liters when calculating molarity, resulting in a concentration that is 1000 times too small and an erroneously acidic pH.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ca(OH)2 is a strong base.\text{Ca(OH)}_2\text{ is a strong base.}

  2. Step 2

    n=0.368 g/74.09 g/mol=0.004967 moln = 0.368\text{ g} / 74.09\text{ g/mol} = 0.004967\text{ mol}

  3. Step 3

    Cb=0.004967 mol/250.0 mL=1.987×10−5 MC_b = 0.004967\text{ mol} / 250.0\text{ mL} = 1.987 \times 10^{-5}\text{ M}

    Correct

    Cb=0.004967 mol0.2500 L≈0.0199 MC_b = \frac{0.004967\text{ mol}}{0.2500\text{ L}} \approx 0.0199\text{ M}

    Molarity is defined as moles of solute per liter of solution (mol/L\text{mol/L}). Because you divided by 250.0 mL250.0\text{ mL} directly without converting to 0.2500 L0.2500\text{ L}, your analytical molarity was underestimated by a factor of 10001000.

  4. Step 4

    [OH−]=2×1.987×10−5 M=3.974×10−5 M[\text{OH}^-] = 2 \times 1.987 \times 10^{-5}\text{ M} = 3.974 \times 10^{-5}\text{ M}

    Correct

    [OH−]=2⋅Cb=2×0.01987 M≈0.0397 M[\text{OH}^-] = 2 \cdot C_b = 2 \times 0.01987\text{ M} \approx 0.0397\text{ M}

    Your reasoning to multiply CbC_b by 22 for the dihydroxy base was completely correct, but the numerical result inherited the volume conversion error from Step 3.

  5. Step 5

    pOH=−log⁡(3.974×10−5)=4.40  ⟹  pH=14.00−4.40=9.60\text{pOH} = -\log(3.974 \times 10^{-5}) = 4.40 \implies \text{pH} = 14.00 - 4.40 = 9.60

    Correct

    pOH=−log⁡(0.03974)≈1.401  ⟹  pH=14.000−1.401=12.599\text{pOH} = -\log(0.03974) \approx 1.401 \implies \text{pH} = 14.000 - 1.401 = 12.599

    You applied the logarithmic formulas and the pH+pOH=14.00\text{pH} + \text{pOH} = 14.00 relationship accurately, but the values were offset because of the earlier concentration error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified calcium hydroxide as a strong base.

You accurately converted milligrams to grams and computed the moles of solute.

You remembered the stoichiometric factor of 22 when relating base concentration to [OH−][\text{OH}^-].

You correctly applied the logarithmic definitions of pOH\text{pOH} and pH\text{pH}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Molarity Volume Unit Error

You divided by volume in milliliters (250.0 mL250.0\text{ mL}) instead of converting to liters (0.2500 L0.2500\text{ L}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the explicit dimensional definition of molarity (1 M=1 mol/L1\text{ M} = 1\text{ mol/L}) leads to using raw volumetric values directly from the problem statement without unit cancellation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity Unit Definition
  • Molarity (M)=moles of solute (mol)volume of solution (L)\text{Molarity } (M) = \frac{\text{moles of solute } (\text{mol})}{\text{volume of solution } (\text{L})}

  • Always convert solution volumes given in milliliters to liters (V (L)=V (mL)1000V\text{ (L)} = \frac{V\text{ (mL)}}{1000}) before computing concentration.

Sanity Check on Basic pH
  • A soluble strong base at millimolar concentrations should produce a distinctly alkaline pH\text{pH} well above 1111.

  • If your calculated pH\text{pH} for a moderate concentration of strong base seems unusually close to neutral (e.g., 99–1010), check for a 1000×1000\times volume conversion slip.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the solution volume to liters: V=250.0 mL=0.2500 LV = 250.0\text{ mL} = 0.2500\text{ L}.

  2. Calculate analytical molarity: Cb=0.004967 mol0.2500 L=0.01987 M≈0.0199 MC_b = \frac{0.004967\text{ mol}}{0.2500\text{ L}} = 0.01987\text{ M} \approx 0.0199\text{ M}.

  3. Determine hydroxide concentration using the 1:21:2 ratio: [OH−]=2×0.01987 M=0.03974 M≈0.0397 M[\text{OH}^-] = 2 \times 0.01987\text{ M} = 0.03974\text{ M} \approx 0.0397\text{ M}.

  4. Calculate pOH\text{pOH}: pOH=−log⁡10(0.03974)≈1.401\text{pOH} = -\log_{10}(0.03974) \approx 1.401.

  5. Calculate pH\text{pH}: pH=14.000−1.401=12.599\text{pH} = 14.000 - 1.401 = 12.599.

Final answer

Ca(OH)2 is a strong base; Cb=0.0199 M;[OH−]=0.0397 M;pOH=1.401;pH=12.599\text{Ca(OH)}_2\text{ is a strong base; } C_b = 0.0199\text{ M}; [\text{OH}^-] = 0.0397\text{ M}; \text{pOH} = 1.401; \text{pH} = 12.599

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that all volume quantities are converted to liters (L\text{L}) before calculating molarity.

  • Perform dimensional analysis explicitly with units on paper: write molL\frac{\text{mol}}{\text{L}} rather than just numbers.

OverviewACEpath Teacher's Diagnosis

03 The student equates the calculated -log[OH⁻] directly to pH rather than pOH, yielding an acidic pH value for a strong base solution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ca(OH)2 is a strong base.\text{Ca(OH)}_2\text{ is a strong base.}

  2. Step 2

    n=0.368 g74.09 g/mol=0.004967 mol  ⟹  Cb=0.004967 mol0.2500 L=0.01987 Mn = \frac{0.368\text{ g}}{74.09\text{ g/mol}} = 0.004967\text{ mol} \implies C_b = \frac{0.004967\text{ mol}}{0.2500\text{ L}} = 0.01987\text{ M}

  3. Step 3

    [OH−]=2×0.01987 M=0.03974 M[\text{OH}^-] = 2 \times 0.01987\text{ M} = 0.03974\text{ M}

  4. Step 4

    pH=−log⁡(0.03974)=1.40\text{pH} = -\log(0.03974) = 1.40

    Correct

    pOH=−log⁡[OH−]=−log⁡(0.03974)≈1.401\text{pOH} = -\log[\text{OH}^-] = -\log(0.03974) \approx 1.401

    Taking the negative logarithm of hydroxide concentration [OH−][\text{OH}^-] defines pOH\text{pOH}, not pH\text{pH}. A solution of a strong base must have a basic pH>7\text{pH} > 7, so a value of 1.401.40 indicates an acidic solution.

  5. Step 5

    pOH=14.00−1.40=12.60\text{pOH} = 14.00 - 1.40 = 12.60

    Correct

    pH=14.000−pOH=14.000−1.401=12.599\text{pH} = 14.000 - \text{pOH} = 14.000 - 1.401 = 12.599

    You correctly used the relationship pH+pOH=14.00\text{pH} + \text{pOH} = 14.00, but because pH\text{pH} and pOH\text{pOH} were swapped in the previous step, your final values remained inverted.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified calcium hydroxide as a strong base.

You accurately converted mass concentration into analytical molarity.

You remembered to multiply by 22 for the two moles of OH−\text{OH}^- produced per mole of Ca(OH)2\text{Ca(OH)}_2.

You correctly applied the relationship pH+pOH=14.00\text{pH} + \text{pOH} = 14.00 at 25.0∘C25.0^\circ\text{C}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Swapped pH and pOH definitions

Equating −log⁡[OH−]-\log[\text{OH}^-] to pH\text{pH} rather than pOH\text{pOH}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating −log⁡[OH−]-\log[\text{OH}^-] with −log⁡[H3O+]-\log[\text{H}_3\text{O}^+]. The prefix 'p' stands for −log⁡10-\log_{10}, so applying it to [OH−][\text{OH}^-] yields pOH\text{pOH}. Always check that basic solutions result in pH>7\text{pH} > 7 and pOH<7\text{pOH} < 7.

REASONING PATH
Your ACEpath teacher’s suggested approach
Connecting $[\text{OH}^-]$ to $\text{pOH}$
  • pOH=−log⁡10[OH−]\text{pOH} = -\log_{10}[\text{OH}^-] and pH=−log⁡10[H+]\text{pH} = -\log_{10}[\text{H}^+]

  • Label the negative logarithm of [OH−][\text{OH}^-] as pOH\text{pOH}, then subtract from 14.0014.00 to obtain pH\text{pH}.

Reality Check for Base Solutions
  • At 25∘C25^\circ\text{C}, any basic solution must have pH>7\text{pH} > 7 and pOH<7\text{pOH} < 7.

  • If you calculate a pH\text{pH} below 77 for a strong base, verify whether you accidentally assigned the pOH\text{pOH} value to pH\text{pH}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. pOH=−log⁡10[OH−]=−log⁡10(0.03974)≈1.401\text{pOH} = -\log_{10}[\text{OH}^-] = -\log_{10}(0.03974) \approx 1.401

  2. pH=14.000−pOH=14.000−1.401=12.599\text{pH} = 14.000 - \text{pOH} = 14.000 - 1.401 = 12.599

Final answer

Ca(OH)2 is a strong base;Cb=0.0199 M;[OH−]=0.0397 M;pOH=1.401;pH=12.599\text{Ca(OH)}_2\text{ is a strong base}; C_b = 0.0199\text{ M}; [\text{OH}^-] = 0.0397\text{ M}; \text{pOH} = 1.401; \text{pH} = 12.599

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the label pOH=−log⁡[OH−]\text{pOH} = -\log[\text{OH}^-] explicitly before computing the logarithm.

  • Perform a sanity check on your final pH\text{pH}: acidic solutions have pH<7\text{pH} < 7, while basic solutions have pH>7\text{pH} > 7.

Lock it in

Similar question

01

Calculate the [OHX−][\ce{OH-}], pOH\text{pOH}, and pH\text{pH} of a 0.0025 M0.0025\text{ M} aqueous solution of barium hydroxide, Ba(OH)X2\ce{Ba(OH)2}, at 25.0∘C25.0^\circ\text{C}.

Answer

[OHX−]=2×0.0025 M=0.0050 M[\ce{OH-}] = 2 \times 0.0025\text{ M} = 0.0050\text{ M}; pOH=−log⁡(0.0050)=2.30\text{pOH} = -\log(0.0050) = 2.30; pH=14.00−2.30=11.70\text{pH} = 14.00 - 2.30 = 11.70.

02

A solution is prepared by dissolving 0.122 g0.122\text{ g} of strontium hydroxide, Sr(OH)X2\ce{Sr(OH)2} (molar mass =121.63 g/mol= 121.63\text{ g/mol}), in water to make 500.0 mL500.0\text{ mL} of solution at 25.0∘C25.0^\circ\text{C}. Find the analytical concentration CbC_b, [OHX−][\ce{OH-}], and pH\text{pH}.

Answer

n=0.122 g121.63 g/mol=1.003×10−3 moln = \frac{0.122\text{ g}}{121.63\text{ g/mol}} = 1.003 \times 10^{-3}\text{ mol}; Cb=1.003×10−3 mol0.5000 L=0.00201 MC_b = \frac{1.003 \times 10^{-3}\text{ mol}}{0.5000\text{ L}} = 0.00201\text{ M}; [OHX−]=2×0.00201 M=0.00401 M[\ce{OH-}] = 2 \times 0.00201\text{ M} = 0.00401\text{ M}; pOH=−log⁡(0.00401)=2.40\text{pOH} = -\log(0.00401) = 2.40; pH=14.00−2.40=11.60\text{pH} = 14.00 - 2.40 = 11.60.

03

An aqueous solution of an unknown strong group 2 hydroxide, M(OH)X2\ce{M(OH)2}, has a measured pH\text{pH} of 12.8012.80 at 25.0∘C25.0^\circ\text{C}. Determine the analytical molarity CbC_b of the base originally dissolved in the solution.

Answer

pOH=14.00−12.80=1.20\text{pOH} = 14.00 - 12.80 = 1.20; [OHX−]=10−1.20=0.0631 M[\ce{OH-}] = 10^{-1.20} = 0.0631\text{ M}; since [OHX−]=2Cb[\ce{OH-}] = 2 C_b, Cb=0.0631 M2=0.0315 MC_b = \frac{0.0631\text{ M}}{2} = 0.0315\text{ M} (or 0.032 M0.032\text{ M} to two significant figures).

Loading workspace…