Resources

A student mixes 50.0 mL50.0\text{ mL} of 0.200 M AgNO3(aq)0.200\text{ M }\text{AgNO}_3(aq) with 50.0 mL50.0\text{ mL} of 0.300 M NaCl(aq)0.300\text{ M }\text{NaCl}(aq) at 25∘C25^\circ\text{C}. (a) Write the balanced net ionic equation for the precipitation reaction that occurs. (b) Determine the limiting reactant and calculate the mass of the solid precipitate formed. (c) Calculate the final molar concentration of spectator ions NO3−(aq)\text{NO}_3^-(aq) and Na+(aq)\text{Na}^+(aq) remaining in the mixture, assuming additive volumes. (Mr of AgCl=143.32 g/molM_r\text{ of AgCl} = 143.32\text{ g/mol})

Answer and steps

Final answer

(a) Ag+(aq)+Cl−(aq)→AgCl(s)\text{Ag}^+(aq) + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s); (b) Limiting reactant is AgNO3\text{AgNO}_3, mass of AgCl(s)=1.43 g\text{AgCl}(s) = 1.43\text{ g}; (c) [NO3−]=0.100 M[\text{NO}_3^-] = 0.100\text{ M}, [Na+]=0.150 M[\text{Na}^+] = 0.150\text{ M}.

Steps

Part (a): Net Ionic Equation

When aqueous solutions of silver nitrate, AgNOX3(aq)\ce{AgNO3(aq)}, and sodium chloride, NaCl(aq)\ce{NaCl(aq)}, are mixed, a double-replacement reaction occurs:

AgNOX3(aq)+NaCl(aq)→AgCl(s)+NaNOX3(aq)\ce{AgNO3(aq) + NaCl(aq) -> AgCl(s) + NaNO3(aq)}

Both initial salts and the product sodium nitrate are soluble, strong electrolytes that dissociate completely into ions:

AgX+(aq)+NOX3X−(aq)+NaX+(aq)+ClX−(aq)→AgCl(s)+NaX+(aq)+NOX3X−(aq)\ce{Ag+(aq) + NO3-(aq) + Na+(aq) + Cl-(aq) -> AgCl(s) + Na+(aq) + NO3-(aq)}

The sodium ions (NaX+\ce{Na+}) and nitrate ions (NOX3X−\ce{NO3-}) remain unchanged in solution as spectator ions. Canceling them from both sides gives the net ionic equation:

AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+(aq) + Cl-(aq) -> AgCl(s)}


Part (b): Limiting Reactant and Precipitate Mass

  1. Calculate the moles of each reacting ion initially present: Moles of AgX+=Moles of AgNOX3=0.0500 L⋅0.200 mol/L=0.0100 mol\text{Moles of }\ce{Ag+} = \text{Moles of }\ce{AgNO3} = 0.0500\text{ L} \cdot 0.200\text{ mol/L} = 0.0100\text{ mol} Moles of ClX−=Moles of NaCl=0.0500 L⋅0.300 mol/L=0.0150 mol\text{Moles of }\ce{Cl-} = \text{Moles of }\ce{NaCl} = 0.0500\text{ L} \cdot 0.300\text{ mol/L} = 0.0150\text{ mol}
  2. Identify the limiting reactant: From the balanced net ionic equation, AgX+\ce{Ag+} and ClX−\ce{Cl-} react in a 1:11:1 stoichiometric ratio. Since 0.0100 mol of AgX+<0.0150 mol of ClX−0.0100\text{ mol of }\ce{Ag+} < 0.0150\text{ mol of }\ce{Cl-}, AgNOX3\ce{AgNO3} is completely consumed first. Therefore, AgNOX3\ce{AgNO3} is the limiting reactant.
  3. Calculate the mass of precipitate (AgCl\ce{AgCl}) formed: The amount of AgCl\ce{AgCl} produced is determined by the limiting reactant: Moles of AgCl=0.0100 mol\text{Moles of }\ce{AgCl} = 0.0100\text{ mol} Mass of AgCl=0.0100 mol⋅143.32 g/mol=1.4332 g≈1.43 g\text{Mass of }\ce{AgCl} = 0.0100\text{ mol} \cdot 143.32\text{ g/mol} = 1.4332\text{ g} \approx 1.43\text{ g}

Part (c): Final Molar Concentration of Spectator Ions

Spectator ions do not participate in the formation of the precipitate, so their total mole amounts remain constant.

  1. Determine the total volume of the mixture: Vtotal=50.0 mL+50.0 mL=100.0 mL=0.1000 LV_{\text{total}} = 50.0\text{ mL} + 50.0\text{ mL} = 100.0\text{ mL} = 0.1000\text{ L}
  2. Calculate the concentration of each spectator ion:

    • For nitrate ions (NOX3X−\ce{NO3-}): [NOX3X−]=0.0100 mol0.1000 L=0.100 M[\ce{NO3-}] = \frac{0.0100\text{ mol}}{0.1000\text{ L}} = 0.100\text{ M}
    • For sodium ions (NaX+\ce{Na+}): [NaX+]=0.0150 mol0.1000 L=0.150 M[\ce{Na+}] = \frac{0.0150\text{ mol}}{0.1000\text{ L}} = 0.150\text{ M}

Common Pitfall: When calculating final ion concentrations after mixing, remember that the solution has been diluted; divide moles by the new total combined volume (100.0 mL100.0\text{ mL}), not by the initial volume (50.0 mL50.0\text{ mL}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the limiting reactant by picking the one with the higher concentration or number of moles rather than the reactant that produces the smaller amount of product.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ag+(aq)+Cl−(aq)→AgCl(s)\text{Ag}^+(aq) + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s)

  2. Step 2

    n(Ag+)=0.0500 L×0.200 M=0.0100 mol  ⟹  n(Cl−)=0.0500 L×0.300 M=0.0150 moln(\text{Ag}^+) = 0.0500\text{ L} \times 0.200\text{ M} = 0.0100\text{ mol} \implies n(\text{Cl}^-) = 0.0500\text{ L} \times 0.300\text{ M} = 0.0150\text{ mol}

  3. Step 3

    0.0150 mol>0.0100 mol0.0150\text{ mol} > 0.0100\text{ mol}, so NaCl\text{NaCl} is the limiting reactant

    Correct

    0.0100 mol Ag+<0.0150 mol Cl−0.0100\text{ mol }\text{Ag}^+ < 0.0150\text{ mol }\text{Cl}^-, so AgNO3\text{AgNO}_3 is the limiting reactant

    The limiting reactant is the substance that is completely consumed first (the one providing fewer moles of product in a 1:11:1 reaction), which is AgNO3\text{AgNO}_3, not NaCl\text{NaCl}.

  4. Step 4

    mass of AgCl=0.0150 mol×143.32 g/mol=2.15 g\text{mass of AgCl} = 0.0150\text{ mol} \times 143.32\text{ g/mol} = 2.15\text{ g}

    Correct

    mass of AgCl=0.0100 mol×143.32 g/mol=1.43 g\text{mass of AgCl} = 0.0100\text{ mol} \times 143.32\text{ g/mol} = 1.43\text{ g}

    Because AgNO3\text{AgNO}_3 limits the reaction, only 0.0100 mol0.0100\text{ mol} of AgCl\text{AgCl} can form.

  5. Step 5

    Vtotal=50.0 mL+50.0 mL=100.0 mL=0.100 L  ⟹  [NO3−]=0.0100 mol0.100 L=0.100 M  ⟹  [Na+]=0.0150 mol0.100 L=0.150 MV_{\text{total}} = 50.0\text{ mL} + 50.0\text{ mL} = 100.0\text{ mL} = 0.100\text{ L} \implies [\text{NO}_3^-] = \frac{0.0100\text{ mol}}{0.100\text{ L}} = 0.100\text{ M} \implies [\text{Na}^+] = \frac{0.0150\text{ mol}}{0.100\text{ L}} = 0.150\text{ M}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the net ionic equation for the precipitation reaction.

You accurately calculated the initial molar quantities of both ions.

You correctly used the additive volume to determine final spectator ion concentrations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Limiting Reactant Misidentification

You selected the reactant with the larger mole quantity as the limiting reactant instead of the reactant with the smaller mole quantity.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the limiting reactant with the excess reactant by associating 'limiting' with the greater available quantity rather than the substance that is exhausted first.

REASONING PATH
Your ACEpath teacher’s suggested approach
Limiting Reactant Definition
  • For reactants reacting in a 1:11:1 stoichiometric ratio, the reactant with fewer moles runs out first and limits the reaction.

  • Compare ncoefficient\frac{n}{\text{coefficient}} for each reactant; the smallest value identifies the limiting reactant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. From the balanced equation Ag+(aq)+Cl−(aq)→AgCl(s)\text{Ag}^+(aq) + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s), 1 mol of Ag+1\text{ mol of }\text{Ag}^+ reacts with 1 mol of Cl−1\text{ mol of }\text{Cl}^-.

  2. Compare the available amounts: 0.0100 mol Ag+<0.0150 mol Cl−0.0100\text{ mol }\text{Ag}^+ < 0.0150\text{ mol }\text{Cl}^-.

  3. Therefore, Ag+\text{Ag}^+ (from AgNO3\text{AgNO}_3) is completely consumed first and is the limiting reactant.

  4. Calculate the precipitate mass from the limiting reactant: m=0.0100 mol×143.32 g/mol=1.43 gm = 0.0100\text{ mol} \times 143.32\text{ g/mol} = 1.43\text{ g}.

Final answer

(a) Ag+(aq)+Cl−(aq)→AgCl(s)\text{Ag}^+(aq) + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s); (b) Limiting reactant is AgNO3\text{AgNO}_3, mass of AgCl(s)=1.43 g\text{AgCl}(s) = 1.43\text{ g}; (c) [NO3−]=0.100 M[\text{NO}_3^-] = 0.100\text{ M}, [Na+]=0.150 M[\text{Na}^+] = 0.150\text{ M}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that the limiting reactant is always the one that produces the least amount of product and runs out first.

  • Practice checking mole-to-coefficient ratios whenever determining the limiting reactant in stoichiometry problems.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to use the total combined volume of the mixture when calculating the final concentrations of spectator ions, dividing by the initial 50.0 mL instead.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ag+(aq)+Cl−(aq)→AgCl(s)\text{Ag}^+(aq) + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s)

  2. Step 2

    n(Ag+)=0.0500 L×0.200 M=0.0100 mol  ⟹  n(Cl−)=0.0500 L×0.300 M=0.0150 mol  ⟹  Since the mole ratio is 1:1, AgNO3 is the limiting reactant  ⟹  mass of AgCl=0.0100 mol×143.32 g/mol=1.43 gn(\text{Ag}^+) = 0.0500\text{ L} \times 0.200\text{ M} = 0.0100\text{ mol} \implies n(\text{Cl}^-) = 0.0500\text{ L} \times 0.300\text{ M} = 0.0150\text{ mol} \implies \text{Since the mole ratio is } 1:1\text{, } \text{AgNO}_3 \text{ is the limiting reactant} \implies \text{mass of AgCl} = 0.0100\text{ mol} \times 143.32\text{ g/mol} = 1.43\text{ g}

  3. Step 3

    V=50.0 mL=0.0500 L  ⟹  [NO3−]=0.0100 mol0.0500 L=0.200 M  ⟹  [Na+]=0.0150 mol0.0500 L=0.300 MV = 50.0\text{ mL} = 0.0500\text{ L} \implies [\text{NO}_3^-] = \frac{0.0100\text{ mol}}{0.0500\text{ L}} = 0.200\text{ M} \implies [\text{Na}^+] = \frac{0.0150\text{ mol}}{0.0500\text{ L}} = 0.300\text{ M}

    Correct

    Vtotal=50.0 mL+50.0 mL=100.0 mL=0.1000 L  ⟹  [NO3−]=0.0100 mol0.1000 L=0.100 M  ⟹  [Na+]=0.0150 mol0.1000 L=0.150 MV_{\text{total}} = 50.0\text{ mL} + 50.0\text{ mL} = 100.0\text{ mL} = 0.1000\text{ L} \implies [\text{NO}_3^-] = \frac{0.0100\text{ mol}}{0.1000\text{ L}} = 0.100\text{ M} \implies [\text{Na}^+] = \frac{0.0150\text{ mol}}{0.1000\text{ L}} = 0.150\text{ M}

    You divided the spectator ion moles by the initial volume (0.0500 L0.0500\text{ L}) rather than the total combined volume of the mixed solution (0.0500 L+0.0500 L=0.1000 L0.0500\text{ L} + 0.0500\text{ L} = 0.1000\text{ L}). Mixing two solutions dilutes all non-precipitating ions.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the net ionic equation for the precipitation reaction.

You accurately calculated initial moles and identified the limiting reactant.

You correctly calculated the mass of silver chloride precipitate formed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of total solution volume upon mixing

You correctly tracked the moles of each spectator ion, but you used the initial volume of one reactant solution instead of adding the two solution volumes together.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the dilution effect when two aqueous solutions are combined. Molar concentration requires dividing moles by the total final volume of the mixture (Vtotal=V1+V2V_{\text{total}} = V_1 + V_2), not by either individual starting volume.

REASONING PATH
Your ACEpath teacher’s suggested approach
Combined Solution Volume
  • When two aqueous solutions are mixed, their volumes add together: Vtotal=V1+V2V_{\text{total}} = V_1 + V_2.

  • Always write down Vtotal=V1+V2V_{\text{total}} = V_1 + V_2 explicitly before calculating any post-mixing ion concentrations.

Spectator Ion Dilution
  • For spectator ions, moles remain constant (nfinal=ninitialn_{\text{final}} = n_{\text{initial}}), but molarity decreases due to dilution: Mfinal=nVtotalM_{\text{final}} = \frac{n}{V_{\text{total}}}.

  • Divide the unreacted or spectator moles by VtotalV_{\text{total}}, not by the initial aliquot volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the total volume of the mixture: Vtotal=50.0 mL+50.0 mL=100.0 mL=0.1000 LV_{\text{total}} = 50.0\text{ mL} + 50.0\text{ mL} = 100.0\text{ mL} = 0.1000\text{ L}.

  2. Calculate final [NO3−][\text{NO}_3^-]: [NO3−]=0.0100 mol0.1000 L=0.100 M[\text{NO}_3^-] = \frac{0.0100\text{ mol}}{0.1000\text{ L}} = 0.100\text{ M}.

  3. Calculate final [Na+][\text{Na}^+]: [Na+]=0.0150 mol0.1000 L=0.150 M[\text{Na}^+] = \frac{0.0150\text{ mol}}{0.1000\text{ L}} = 0.150\text{ M}.

Final answer

[NO3−]=0.100 M[\text{NO}_3^-] = 0.100\text{ M}, [Na+]=0.150 M[\text{Na}^+] = 0.150\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before finding final concentrations, underline both given volumes and calculate Vtotal=V1+V2V_{\text{total}} = V_1 + V_2 as a distinct step.

  • Practice mixing problems where volumes are unequal (such as 25 mL+75 mL25\text{ mL} + 75\text{ mL}) to reinforce dividing by the total combined volume.

OverviewACEpath Teacher's Diagnosis

03 The student writes the complete molecular equation instead of the net ionic equation for the precipitation reaction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    AgNOX3(aq)+NaCl(aq)→AgCl(s)+NaNOX3(aq)\ce{AgNO3(aq) + NaCl(aq) -> AgCl(s) + NaNO3(aq)}

    Correct

    AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+(aq) + Cl-(aq) -> AgCl(s)}

    You wrote the complete molecular equation rather than the net ionic equation. To find the net ionic equation, split all aqueous strong electrolytes into their component ions and eliminate spectator ions (NaX+\ce{Na+} and NOX3X−\ce{NO3-}).

  2. Step 2

    n(AgNOX3)=0.0500 L×0.200 M=0.0100 mol  ⟹  n(NaCl)=0.0500 L×0.300 M=0.0150 mol  ⟹  AgNOX3 is the limiting reactant  ⟹  mass of AgCl=0.0100 mol×143.32 g/mol=1.43 gn(\ce{AgNO3}) = 0.0500\text{ L} \times 0.200\text{ M} = 0.0100\text{ mol} \implies n(\ce{NaCl}) = 0.0500\text{ L} \times 0.300\text{ M} = 0.0150\text{ mol} \implies \ce{AgNO3}\text{ is the limiting reactant} \implies \text{mass of }\ce{AgCl} = 0.0100\text{ mol} \times 143.32\text{ g/mol} = 1.43\text{ g}

  3. Step 3

    Vtotal=50.0 mL+50.0 mL=100.0 mL=0.100 L  ⟹  [NOX3X−]=0.0100 mol0.100 L=0.100 M  ⟹  [NaX+]=0.0150 mol0.100 L=0.150 MV_{\text{total}} = 50.0\text{ mL} + 50.0\text{ mL} = 100.0\text{ mL} = 0.100\text{ L} \implies [\ce{NO3-}] = \frac{0.0100\text{ mol}}{0.100\text{ L}} = 0.100\text{ M} \implies [\ce{Na+}] = \frac{0.0150\text{ mol}}{0.100\text{ L}} = 0.150\text{ M}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial moles of both reactants.

You correctly identified the limiting reactant and determined the mass of precipitate formed.

You properly summed the solution volumes to calculate the final spectator ion concentrations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Molecular vs. Net Ionic Equation Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You provided the balanced molecular equation representing the overall formula units instead of canceling out the spectator ions to show only the species directly participating in bond formation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguishing Equation Types
  • A molecular equation shows neutral formula units; a complete ionic equation dissociates all soluble strong electrolytes into ions; a net ionic equation cancels spectator ions and shows only species forming a precipitate, gas, or weak electrolyte.

  • Whenever asked for a net ionic equation, write the complete ionic equation first and eliminate identical aqueous ions appearing on both sides.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete ionic equation: AgX+(aq)+NOX3X−(aq)+NaX+(aq)+ClX−(aq)→AgCl(s)+NaX+(aq)+NOX3X−(aq)\ce{Ag+(aq) + NO3-(aq) + Na+(aq) + Cl-(aq) -> AgCl(s) + Na+(aq) + NO3-(aq)}

  2. Identify and cancel spectator ions that remain dissolved and unchanged on both sides: NaX+(aq)\ce{Na+(aq)} and NOX3X−(aq)\ce{NO3-(aq)}

  3. Write the remaining participating ions and insoluble solid: AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+(aq) + Cl-(aq) -> AgCl(s)}

Final answer

(a) AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+(aq) + Cl-(aq) -> AgCl(s)}; (b) Limiting reactant is AgNOX3\ce{AgNO3}, mass of AgCl(s)=1.43 g\ce{AgCl}(s) = 1.43\text{ g}; (c) [NOX3X−]=0.100 M[\ce{NO3-}] = 0.100\text{ M}, [NaX+]=0.150 M[\ce{Na+}] = 0.150\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the three formats of aqueous equations: molecular, complete ionic, and net ionic.

  • Practice crossing out spectator ions from complete ionic equations to isolate the precipitation event.

  • Pay close attention to problem prompts specifying 'net ionic' rather than 'balanced chemical equation'.

Lock it in

Similar question

01

A student mixes 40.0 mL40.0\text{ mL} of 0.100 M AgNO3(aq)0.100\text{ M }\text{AgNO}_3(aq) with 60.0 mL60.0\text{ mL} of 0.100 M NaCl(aq)0.100\text{ M }\text{NaCl}(aq). Identify the limiting reactant and calculate the mass of AgCl(s)\text{AgCl}(s) produced. (Mr of AgCl=143.32 g/molM_r\text{ of AgCl} = 143.32\text{ g/mol})

Answer

n(Ag+)=0.00400 moln(\text{Ag}^+) = 0.00400\text{ mol}, n(Cl−)=0.00600 moln(\text{Cl}^-) = 0.00600\text{ mol}. Since 0.00400<0.006000.00400 < 0.00600, AgNO3\text{AgNO}_3 is the limiting reactant. Mass of AgCl=0.00400 mol×143.32 g/mol=0.573 g\text{AgCl} = 0.00400\text{ mol} \times 143.32\text{ g/mol} = 0.573\text{ g}.

02

A solution containing 0.0250 mol of Pb(NO3)20.0250\text{ mol of }\text{Pb(NO}_3)_2 is mixed with a solution containing 0.0400 mol of KI0.0400\text{ mol of }\text{KI}. The reaction is Pb2+(aq)+2I−(aq)→PbI2(s)\text{Pb}^{2+}(aq) + 2\text{I}^-(aq) \rightarrow \text{PbI}_2(s). Identify the limiting reactant and find the moles of PbI2(s)\text{PbI}_2(s) precipitated.

Answer

Comparing ncoefficient\frac{n}{\text{coefficient}}: for Pb2+\text{Pb}^{2+}, 0.02501=0.0250\frac{0.0250}{1} = 0.0250; for I−\text{I}^-, 0.04002=0.0200\frac{0.0400}{2} = 0.0200. Since 0.0200<0.02500.0200 < 0.0250, KI\text{KI} is limiting. Moles of PbI2=0.04002=0.0200 mol\text{PbI}_2 = \frac{0.0400}{2} = 0.0200\text{ mol}.

03

Mixing 50.0 mL50.0\text{ mL} of 0.200 M CaCl2(aq)0.200\text{ M }\text{CaCl}_2(aq) and 50.0 mL50.0\text{ mL} of 0.150 M Na2CO3(aq)0.150\text{ M }\text{Na}_2\text{CO}_3(aq) precipitates CaCO3(s)\text{CaCO}_3(s) (Mr=100.09 g/molM_r = 100.09\text{ g/mol}). Determine the limiting reactant, calculate the mass of precipitate, and find the concentration of excess Ca2+(aq)\text{Ca}^{2+}(aq) remaining in the 100.0 mL100.0\text{ mL} mixture.

Answer

n(Ca2+)=0.0100 moln(\text{Ca}^{2+}) = 0.0100\text{ mol}, n(CO32−)=0.00750 moln(\text{CO}_3^{2-}) = 0.00750\text{ mol}. Na2CO3\text{Na}_2\text{CO}_3 is limiting (0.00750<0.01000.00750 < 0.0100). Mass of CaCO3=0.00750 mol×100.09 g/mol=0.751 g\text{CaCO}_3 = 0.00750\text{ mol} \times 100.09\text{ g/mol} = 0.751\text{ g}. Unreacted n(Ca2+)=0.0100−0.00750=0.00250 moln(\text{Ca}^{2+}) = 0.0100 - 0.00750 = 0.00250\text{ mol}. [extCa2+]final=0.00250 mol0.1000 L=0.0250 M[ ext{Ca}^{2+}]_{\text{final}} = \frac{0.00250\text{ mol}}{0.1000\text{ L}} = 0.0250\text{ M}.

Loading workspace…