Resources
An industrial synthesis of ibuprofen can be carried out via the traditional Boots process or the greener BHC catalytic process. In a benchmark trial of the BHC process, of isobutylbenzene (molar mass ) is converted in three catalytic steps into ibuprofen (molar mass ). The overall balanced equation for the catalytic synthesis is . In this trial, the overall isolated product yield is . (a) Calculate the theoretical atom economy (AE) of the reaction, assuming acetic acid (, molar mass ) is considered a by-product. (b) Calculate the mass of ibuprofen isolated from the of isobutylbenzene. (c) Calculate the Environmental factor (-factor) of this run, defined as , assuming acetic acid and unreacted starting materials are the only chemical wastes generated and all recovered catalysts and solvents are recycled.
Answer and steps
Final answer
(a) ; (b) Isolated mass of ibuprofen ; (c)
Steps
Calculate the Theoretical Atom Economy (AE)
Atom economy evaluates the efficiency of a chemical reaction by measuring the proportion of reactant atoms that end up in the desired product:
From the balanced equation:
- Desired product: Ibuprofen (, molar mass )
- By-product: Acetic acid (, molar mass )
Total molar mass of all products:
Calculate the atom economy:
Calculate the Mass of Ibuprofen Isolated
- Find moles of isobutylbenzene ():
- Determine the theoretical yield of ibuprofen: The stoichiometric ratio between isobutylbenzene and ibuprofen is :
- Calculate the actual isolated mass: Applying the isolated yield of :
Calculate the Environmental Factor (-factor)
The Environmental factor (-factor) quantifies the amount of chemical waste generated per unit mass of target product:
In this catalytic run:
- Acetic acid formed: In the initial acylation step, acetic acid is generated stoichiometrically from the charged feed:
- Unreacted isobutylbenzene: With an isolated yield of , the unreacted fraction of the starting material is :
- Total waste generated: Summing the chemical wastes generated from the feedstock:
Normalized to the benchmark feedstock run, the operational waste ratio yields:
Typical errors
01 The student confuses the definition of atom economy with percentage yield, dividing the isolated mass of product by the initial mass of isobutylbenzene.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Atom economy measures stoichiometric efficiency based on the balanced chemical equation, not the experimental mass recovered from a limiting reactant. Because all reactant atoms end up as products in a balanced reaction, atom economy cannot exceed .
- Step 2
- Step 3Correct
You assumed stoichiometric charges of all four reactants were wasted rather than identifying the specific wastes defined by the process conditions: the acetic acid co-product produced () and the unreacted starting material ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the molar quantity of the starting material isobutylbenzene.
You accurately determined the stoichiometric theoretical yield and isolated mass of ibuprofen.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated experimental mass ratio and percentage yield with theoretical atom economy. Atom economy depends strictly on the molecular weights in the balanced chemical equation, independent of reaction yield or experimental charges.
REASONING PATH
Your ACEpath teacher’s suggested approach- Atom Economy vs. Yield
Always compute atom economy from the molecular weights and stoichiometric coefficients of the balanced equation, never from experimental reactant masses.
- Waste Accounting for E-factor
Explicitly identify and sum each individual waste stream (such as stoichiometric co-products and residual feedstock from incomplete conversion) before dividing by the mass of isolated target product.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the desired product and by-product from the equation: .
Sum the molar masses of all products: .
Calculate theoretical atom economy: .
Calculate acetic acid waste: .
Calculate unreacted feed waste: .
Calculate total waste and -factor: , giving .
(a) ; (b) Isolated mass ; (c)
02 The student neglects to multiply moles by the molar mass of ibuprofen when finding theoretical yield, equating mass of ibuprofen directly to the mass of isobutylbenzene.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You assumed that of isobutylbenzene yields of ibuprofen theoretically. Because the two compounds have different molar masses ( vs. ), you must convert the starting mass to moles first before multiplying by the molar mass of ibuprofen.
- Step 3Correct
Your -factor calculation followed a logical mass balance, but it was affected by your underestimated product mass from step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the definition of atom economy as the ratio of target molar mass to total product molar mass.
You recognized that isolated yield is applied as a percentage multiplier () to find the actual isolated mass.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated reactant mass as directly interchangeable with theoretical product mass, overlooking that a stoichiometric mole ratio is not a mass ratio when molar masses differ.
REASONING PATH
Your ACEpath teacher’s suggested approach- Stoichiometric Mole Bridge
Chemical equations relate quantities in moles, not in grams: .
Always convert starting mass to moles first using its molar mass before moving to the product's mass.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind moles of starting isobutylbenzene: .
Calculate theoretical mass of ibuprofen ( mole ratio): .
Apply the yield: .
Determine chemical waste: acetic acid produced is ; unreacted feed is . Total waste .
Calculate the -factor for the benchmark run: .
(a) ; (b) Isolated mass of ibuprofen ; (c)
03 The student considers only by-product acetic acid as waste in calculating the E-factor, omitting unreacted starting materials.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You considered only the stoichiometric by-product (acetic acid) as waste. In green chemistry metrics, chemical waste includes both by-products and all unreacted starting materials that are not recovered.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up and solved for the theoretical atom economy.
You accurately converted the mass of feedstock to moles and applied the percentage yield to find the isolated mass of ibuprofen.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated stoichiometric by-product formation as the sole contributor to chemical waste, forgetting that unconverted reactants also become waste when not recycled.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIncomplete definition of waste in the Environmental factor (-factor). Chemical waste encompasses all mass introduced into the process that does not end up as the desired target product, specifically including stoichiometric by-products, side-products, and unreacted reagents.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define Chemical Waste for E-factor
Before dividing by the product mass, explicitly list every waste stream specified in the problem statement.
- Account for Incomplete Conversion
Multiply the starting mass by the unreacted fraction () to determine residual feedstock waste.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate acetic acid generated from the stoichiometric reaction of the feedstock: .
Calculate unreacted starting material from the yield: .
Sum the waste components: .
Determine the -factor for the benchmark run: .
(a) ; (b) Isolated mass of ibuprofen ; (c)
Lock it in
What is the theoretical definition and formula for Atom Economy (AE)?
. It evaluates the theoretical proportion of reactant atoms incorporated into the desired product from the balanced equation.
Similar question
Ethylene oxide (molar mass ) is synthesized via direct oxidation: . Calculate the theoretical atom economy of this process.
Answer
. Because ethylene oxide is the sole product of the reaction, all reactant atoms are converted into the desired product, giving .
A classic preparation of 1-bromobutane () is . Calculate the atom economy of this substitution reaction (molar masses: , ).
Answer
. Total product molar mass . Therefore, .
In a pilot synthesis, of target product () is produced alongside of an organic salt by-product. If of unreacted starting reagent remains and all solvents are fully recycled, calculate the -factor for this batch.
Answer
. Total chemical waste is the by-product plus unreacted reagent: . .