Resources

Evaluate the following combined multi-step laboratory calculation representing a differential mass per unit volume: Z=125.48 g−125.41 g15.00 mL×2.055 cm3/mLZ = \frac{125.48\text{ g} - 125.41\text{ g}}{15.00\text{ mL} \times 2.055\text{ cm}^3/\text{mL}}. Identify the critical intermediate operation where a severe loss of significant figures occurs, and state the final computed value of ZZ in g/cm3\text{g/cm}^3 rounded strictly to the correct number of significant figures.

Answer and steps

Final answer

Z=2.3×10−3 g/cm3Z = 2.3 \times 10^{-3}\text{ g/cm}^3 (limited to 22 significant figures due to subtraction in the numerator: 125.48−125.41=0.07 g125.48 - 125.41 = 0.07\text{ g}, having only two decimal places and two significant figures)

Steps

01

Evaluate the Numerator (Subtraction)

For addition and subtraction, the result is governed by the least number of decimal places in any term: 125.48 g−125.41 g=0.07 g125.48\text{ g} - 125.41\text{ g} = 0.07\text{ g} Both measurements are known to the hundredths place (two decimal places). This intermediate subtraction represents a phenomenon known as catastrophic cancellation (or significant figure loss), where subtracting two nearly equal five-significant-figure numbers results in an intermediate value of 0.07 g0.07\text{ g} with precision determined by its two decimal places, leaving it with 22 significant figures for downstream multi-step evaluation.

02

Evaluate the Denominator (Multiplication)

For multiplication and division, the result is governed by the factor with the fewest significant figures: 15.00 mL×2.055 cm3/mL=30.825 cm315.00\text{ mL} \times 2.055\text{ cm}^3/\text{mL} = 30.825\text{ cm}^3

  • 15.00 mL15.00\text{ mL} has 44 significant figures.
  • 2.055 cm3/mL2.055\text{ cm}^3/\text{mL} has 44 significant figures.

Thus, the denominator retains 44 significant figures (30.83 cm330.83\text{ cm}^3), but we keep the unrounded value (30.825 cm330.825\text{ cm}^3) to prevent intermediate rounding error.

03

Compute the Quotient and Apply the Limiting Precision

Now divide the numerator by the denominator: Z=0.07 g30.825 cm3≈0.00227088… g/cm3Z = \frac{0.07\text{ g}}{30.825\text{ cm}^3} \approx 0.00227088\dots\text{ g/cm}^3

The numerator operation is the critical limiting step that restricts the final value to 22 significant figures. Rounding 0.00227088…0.00227088\dots to 22 significant figures gives: Z=2.3×10−3 g/cm3Z = 2.3 \times 10^{-3}\text{ g/cm}^3

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student tracks significant figures by counting total digits instead of applying the decimal place addition/subtraction rule, incorrectly assigning two significant figures (0.070 g) to the numerator.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Loss of significance occurs during division because the values have different counts of significant figures.

    Correct

    Loss of significance (catastrophic cancellation) occurs during the subtraction in the numerator (125.48 g−125.41 g125.48\text{ g} - 125.41\text{ g}).

    Subtracting two nearly equal five-significant-figure numbers leaves a difference of 0.07 g0.07\text{ g}, causing a severe drop from 55 significant figures down to limited precision in the numerator. Division simply preserves the lowest count of significant figures rather than causing the sudden loss.

  2. Step 2

    125.48 g−125.41 g=0.070 g125.48\text{ g} - 125.41\text{ g} = 0.070\text{ g}

    Correct

    125.48 g−125.41 g=0.07 g125.48\text{ g} - 125.41\text{ g} = 0.07\text{ g}

    Both initial values have two decimal places (hundredths place). Their difference is 0.07 g0.07\text{ g}. Appending a trailing zero to make 0.070 g0.070\text{ g} falsely claims precision to the thousandths place (three decimal places).

  3. Step 3

    15.00 mL×2.055 cm3/mL=30.825 cm315.00\text{ mL} \times 2.055\text{ cm}^3/\text{mL} = 30.825\text{ cm}^3

  4. Step 4

    Z=0.070 g/30.825 cm3  ⟹  Z=0.0023 g/cm3Z = 0.070\text{ g} / 30.825\text{ cm}^3 \implies Z = 0.0023\text{ g/cm}^3

    Correct

    Z=0.07 g30.825 cm3≈2.3×10−3 g/cm3Z = \frac{0.07\text{ g}}{30.825\text{ cm}^3} \approx 2.3 \times 10^{-3}\text{ g/cm}^3

    Your numerical division and rounding to two figures were executed well based on your numerator, though writing the result as 2.3×10−3 g/cm32.3 \times 10^{-3}\text{ g/cm}^3 in standard scientific notation avoids ambiguity with leading zeros.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the denominator accurately without premature rounding.

You carried out the quotient calculation correctly to arrive at 0.0023 g/cm30.0023\text{ g/cm}^3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Catastrophic cancellation misidentification & artificial trailing zero

You appended an unwarranted trailing zero (0.070 g0.070\text{ g}) to the subtraction result, which changed the measurement from two decimal places to three.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the decimal place rule for addition/subtraction with significant figure counting, and you attributed the loss of precision to division instead of recognizing catastrophic cancellation in the subtraction of nearly equal values.

REASONING PATH
Your ACEpath teacher’s suggested approach
Addition/Subtraction Rule
  • The result of addition or subtraction is determined by the fewest decimal places (least precise place value), not by the total number of significant figures.

  • Subtract directly and terminate at the least precise place value; never add extra trailing zeros unless the measurement digits explicitly produce them.

Identifying Catastrophic Cancellation
  • Catastrophic cancellation occurs when subtracting two close numbers of similar magnitude, leaving very few remaining digits.

  • Inspect subtraction steps first whenever you look for an operation that dramatically reduces significant figures.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the subtraction 125.48 g−125.41 g125.48\text{ g} - 125.41\text{ g} as the critical step where significant figures drop from 55 to limited precision.

  2. Compute the numerator: 125.48 g−125.41 g=0.07 g125.48\text{ g} - 125.41\text{ g} = 0.07\text{ g}, stopping at the hundredths place.

  3. Divide by the denominator: Z=0.07 g30.825 cm3≈0.0022709 g/cm3Z = \frac{0.07\text{ g}}{30.825\text{ cm}^3} \approx 0.0022709\text{ g/cm}^3.

  4. Round according to the limiting numerator precision to obtain 2.3×10−3 g/cm32.3 \times 10^{-3}\text{ g/cm}^3.

Final answer

Z=2.3×10−3 g/cm3Z = 2.3 \times 10^{-3}\text{ g/cm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between the decimal place rule for subtraction and the significant figure count rule for division.

  • Practice identifying catastrophic cancellation in experimental laboratory differences, such as container taring.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the operation causing loss of precision and rounds the final answer to four significant figures based on the least precise term in the denominator.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The critical loss occurs in the denominator multiplication of 15.00 mL15.00\text{ mL} and 2.055 cm3/mL2.055\text{ cm}^3/\text{mL}.

    Correct

    The critical loss occurs in the numerator subtraction: 125.48 g−125.41 g125.48\text{ g} - 125.41\text{ g}.

    In the denominator multiplication, both 15.00 mL15.00\text{ mL} and 2.055 cm3/mL2.055\text{ cm}^3/\text{mL} have 44 significant figures, so no significant figures are lost there. The severe loss of precision occurs during the subtraction in the numerator, where subtracting two nearly equal five-significant-figure values drops the precision drastically to two decimal places.

  2. Step 2

    125.48 g−125.41 g=0.07 g  ⟹  15.00 mL×2.055 cm3/mL=30.825 cm3  ⟹  Z=0.07 g30.825 cm3=0.00227088… g/cm3125.48\text{ g} - 125.41\text{ g} = 0.07\text{ g} \implies 15.00\text{ mL} \times 2.055\text{ cm}^3/\text{mL} = 30.825\text{ cm}^3 \implies Z = \frac{0.07\text{ g}}{30.825\text{ cm}^3} = 0.00227088\dots\text{ g/cm}^3

  3. Step 3

    Z=0.002271 g/cm3Z = 0.002271\text{ g/cm}^3

    Correct

    Z=2.3×10−3 g/cm3Z = 2.3 \times 10^{-3}\text{ g/cm}^3

    Because the numerator subtraction limits the result to 22 significant figures, the final quotient must be rounded to 22 significant figures (2.3×10−3 g/cm32.3 \times 10^{-3}\text{ g/cm}^3) rather than 44 significant figures.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the numerical values of both the numerator and the denominator.

You retained extra unrounded decimal places during the intermediate division step to prevent compounding roundoff error.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Catastrophic cancellation and significant figures in mixed operations

You mistook the 44-significant-figure denominator terms as the limiting precision instead of evaluating the precision lost in the numerator subtraction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the multiplication rule count to the whole expression without tracking how addition/subtraction rules reduce the number of significant figures before a subsequent division.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate Addition and Subtraction by Decimal Places
  • For addition and subtraction, precision is determined by the term with the fewest decimal places, not the fewest significant figures.

  • Always count the decimal places first, determine the resulting value, and note how many significant figures survive before moving to multiplication or division.

Recognize Catastrophic Cancellation
  • Subtracting two close numbers with many significant figures often leaves an answer with very few significant figures.

  • Check differences of nearly equal numbers immediately; they are almost always the bottleneck limiting the overall precision of the final answer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the limiting step: the numerator subtraction leaves an intermediate difference of 0.07 g0.07\text{ g}, which governs the quotient precision with 22 significant figures.

  2. Divide the unrounded values: 0.07 g30.825 cm3=0.00227088… g/cm3\frac{0.07\text{ g}}{30.825\text{ cm}^3} = 0.00227088\dots\text{ g/cm}^3.

  3. Round the final quotient to 22 significant figures: 0.00227088… g/cm3≈2.3×10−3 g/cm30.00227088\dots\text{ g/cm}^3 \approx 2.3 \times 10^{-3}\text{ g/cm}^3.

Final answer

Z=2.3×10−3 g/cm3Z = 2.3 \times 10^{-3}\text{ g/cm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Annotate the number of significant figures above each intermediate result when solving mixed-operation equations.

  • Practice identifying catastrophic cancellation in laboratory titrations and differential weighing problems.

OverviewACEpath Teacher's Diagnosis

03 The student confuses decimal places with significant figures, incorrectly keeping two decimal places in the final quotient and reporting 0.00 g/cm³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The subtraction in the numerator loses significant figures because 125.48 g−125.41 g125.48\text{ g} - 125.41\text{ g} yields 0.07 g0.07\text{ g}. Numerator has 22 decimal places.

  2. Step 2

    Denominator=15.00×2.055=30.825 cm3\text{Denominator} = 15.00 \times 2.055 = 30.825\text{ cm}^3

  3. Step 3

    Z=0.00227 g/cm3  ⟹  Z=0.00 g/cm3Z = 0.00227\text{ g/cm}^3 \implies Z = 0.00\text{ g/cm}^3

    Correct

    Z=0.07 g30.825 cm3≈0.00227088… g/cm3  ⟹  Z=2.3×10−3 g/cm3Z = \frac{0.07\text{ g}}{30.825\text{ cm}^3} \approx 0.00227088\dots\text{ g/cm}^3 \implies Z = 2.3 \times 10^{-3}\text{ g/cm}^3

    You rounded the quotient to two decimal places (0.00 g/cm30.00\text{ g/cm}^3) rather than keeping two significant figures (2.3×10−3 g/cm32.3 \times 10^{-3}\text{ g/cm}^3). The rule for division is governed by significant figures, not decimal places.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the numerator subtraction as the operation responsible for catastrophic loss of precision.

You evaluated the denominator multiplication accurately without prematurely rounding intermediate digits.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing decimal places with significant figures in mixed operations

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You transferred the decimal-place rule from the intermediate subtraction step directly into the final division step, rounding the final quotient to two decimal places instead of counting significant figures.

REASONING PATH
Your ACEpath teacher’s suggested approach
Operation-specific rounding rules
  • Addition and subtraction are limited by the fewest decimal places; multiplication and division are limited by the fewest total significant figures.

  • Once you determine the precision of an intermediate subtraction, count how many significant figures that result holds, and use that count to govern subsequent multiplications or divisions.

Leading zeros in decimals
  • Leading zeros in numbers like 0.00230.0023 are place holders and do not count as significant figures.

  • Write small values in scientific notation (2.3×10−32.3 \times 10^{-3}) to clearly display the correct number of significant digits.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the intermediate values: 0.07 g30.825 cm3=0.00227088… g/cm3\frac{0.07\text{ g}}{30.825\text{ cm}^3} = 0.00227088\dots\text{ g/cm}^3.

  2. Identify the limiting significant figures: the numerator 0.07 g0.07\text{ g} limits the quotient to 22 significant figures.

  3. Round 0.00227088… g/cm30.00227088\dots\text{ g/cm}^3 to 22 significant figures, giving 0.0023 g/cm30.0023\text{ g/cm}^3 or 2.3×10−3 g/cm32.3 \times 10^{-3}\text{ g/cm}^3.

Final answer

Z=2.3×10−3 g/cm3Z = 2.3 \times 10^{-3}\text{ g/cm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing when to count decimal places (addition/subtraction) versus significant figures (multiplication/division).

  • Convert small decimal results to scientific notation before rounding so leading zeros do not confuse your digit count.

Lock it in

Similar question

01

A student measures an empty beaker as 48.26 g48.26\text{ g} and the beaker with a small sample as 48.31 g48.31\text{ g}. Calculate the sample mass and state how many decimal places and significant figures it possesses.

Answer

Mass =48.31 g−48.26 g=0.05 g= 48.31\text{ g} - 48.26\text{ g} = 0.05\text{ g}. Key steps: subtraction is governed by decimal places (hundredths place, 22 decimal places). The result has 22 decimal places and 11 significant figure.

02

Evaluate the density expression ρ=10.84 g−10.72 g2.500 mL\rho = \frac{10.84\text{ g} - 10.72\text{ g}}{2.500\text{ mL}}. Identify which operation limits the significant figures of the final answer and report ρ\rho to the correct number of significant figures.

Answer

ρ=4.8×10−2 g/mL\rho = 4.8 \times 10^{-2}\text{ g/mL}. Key steps: Numerator subtraction 10.84−10.72=0.12 g10.84 - 10.72 = 0.12\text{ g} (22 significant figures, hundredths place) limits the overall calculation because the denominator has 44 significant figures (2.500 mL2.500\text{ mL}). Dividing gives 0.122.500=0.048=4.8×10−2 g/mL\frac{0.12}{2.500} = 0.048 = 4.8 \times 10^{-2}\text{ g/mL}.

03

Consider the multi-step expression Y=(84.155−84.120)×4.1840.5000×12.0Y = \frac{(84.155 - 84.120) \times 4.184}{0.5000 \times 12.0}. Identify the intermediate step where catastrophic cancellation occurs, and compute YY rounded strictly to the correct number of significant figures.

Answer

Y=0.024Y = 0.024. Key steps: Catastrophic cancellation occurs in the subtraction 84.155−84.120=0.03584.155 - 84.120 = 0.035 (drops from 55 figures to 22 significant figures, matching 33 decimal places). The denominator equals 6.0006.000 (22 significant figures from 12.012.0). Evaluating 0.035×4.1846.000≈0.024406…\frac{0.035 \times 4.184}{6.000} \approx 0.024406\dots, which rounds to 22 significant figures as 0.0240.024 (or 2.4×10−22.4 \times 10^{-2}).

Loading workspace…