Resources

A student performs a flame test on an unknown group 1 alkali metal salt and observes a deep crimson-red flame. To verify the identity through quantitative atomic spectroscopy, the student measures the frequency of the most prominent electronic transition to be ν=4.470×1014 Hz\nu = 4.470 \times 10^{14}\text{ Hz}. (a) Solve for the wavelength (λ\lambda) of this emission line in nanometers (nm\text{nm}), given c=2.998×108 m/sc = 2.998 \times 10^8\text{ m/s}. (b) Identify the alkali metal cation based on this characteristic spectroscopic transition. (c) Express the wavenumber (ν~=1λ\tilde{\nu} = \frac{1}{\lambda}) of this transition in reciprocal centimeters (cm−1\text{cm}^{-1}).

Answer and steps

Final answer

(a) λ=670.7 nm\lambda = 670.7\text{ nm}; (b) Lithium ion (Li+\text{Li}^+); (c) ν~=1.491×104 cm−1\tilde{\nu} = 1.491 \times 10^4\text{ cm}^{-1}

Steps

Part (a): Calculating the Wavelength (λ\lambda) in Nanometers

The speed of light (cc), frequency (ν\nu), and wavelength (λ\lambda) are related by the wave equation:

c=λνc = \lambda \nu

Rearranging the formula to solve for wavelength:

λ=cν\lambda = \frac{c}{\nu}

Substitute the given values into the equation:

λ=2.998×108 m/s4.470×1014 s−1=6.7069×10−7 m\lambda = \frac{2.998 \times 10^8\text{ m/s}}{4.470 \times 10^{14}\text{ s}^{-1}} = 6.7069 \times 10^{-7}\text{ m}

Convert meters to nanometers using the conversion factor 1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}:

λ=6.7069×10−7 m×109 nm1 m≈670.7 nm\lambda = 6.7069 \times 10^{-7}\text{ m} \times \frac{10^9\text{ nm}}{1\text{ m}} \approx 670.7\text{ nm}


Part (b): Identifying the Alkali Metal Cation

Alkali metal cations produce characteristic colors during flame tests and emit light at specific wavelengths corresponding to valence electron relaxation:

  • Sodium (NaX+\ce{Na+}): Intense yellow (≈589 nm\approx 589\text{ nm})
  • Potassium (KX+\ce{K+}): Lilac / pale violet (≈766 nm\approx 766\text{ nm})
  • Rubidium (RbX+\ce{Rb+}): Red-violet (≈780 nm\approx 780\text{ nm})
  • Cesium (CsX+\ce{Cs+}): Blue / violet (≈455 nm\approx 455\text{ nm})
  • Lithium (LiX+\ce{Li+}): Deep crimson-red (intense atomic emission line at 670.7 nm670.7\text{ nm} or 670.8 nm670.8\text{ nm}, corresponding to the 2p→2s2p \rightarrow 2s transition)

Both the qualitative observation of a crimson-red flame and the quantitative emission line at λ=670.7 nm\lambda = 670.7\text{ nm} confirm the identity of the cation as the lithium ion (LiX+\ce{Li+}).


Part (c): Expressing the Wavenumber (ν~\tilde{\nu}) in cm−1\text{cm}^{-1}

Wavenumber (ν~\tilde{\nu}) represents the number of waves per unit length and is defined as the reciprocal of wavelength:

ν~=1λ\tilde{\nu} = \frac{1}{\lambda}

First, express the wavelength in centimeters:

λ=6.7069×10−7 m×100 cm1 m=6.7069×10−5 cm\lambda = 6.7069 \times 10^{-7}\text{ m} \times \frac{100\text{ cm}}{1\text{ m}} = 6.7069 \times 10^{-5}\text{ cm}

Now, compute the wavenumber:

ν~=16.7069×10−5 cm≈1.491×104 cm−1\tilde{\nu} = \frac{1}{6.7069 \times 10^{-5}\text{ cm}} \approx 1.491 \times 10^4\text{ cm}^{-1}

Common Pitfall: When calculating wavenumber in cm−1\text{cm}^{-1}, ensure you convert the wavelength λ\lambda from meters to centimeters before taking the reciprocal, rather than simply dividing 11 by the wavelength in meters or nanometers.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the alkali metal as strontium because strontium also produces a crimson flame, forgetting that the problem specifies a group 1 alkali metal.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=cν=2.998×1084.470×1014=6.707×10−7 m⟹λ=670.7 nm\lambda = \frac{c}{\nu} = \frac{2.998 \times 10^8}{4.470 \times 10^{14}} = 6.707 \times 10^{-7}\text{ m} \Longrightarrow \lambda = 670.7\text{ nm}

  2. Step 2

    "A crimson-red flame is characteristic of strontium, so the cation is Sr2+\text{Sr}^{2+}."

    Correct

    The crimson flame and 670.7 nm670.7\text{ nm} emission line correspond to the Group 1 alkali metal lithium ion (Li+\text{Li}^+).

    While strontium also imparts a crimson-red flame, strontium is an alkaline earth metal in Group 2. The problem specifies an unknown Group 1 alkali metal salt, which identifies the cation as lithium (Li+\text{Li}^+).

  3. Step 3

    ν~=1λ=1(6.707×10−5 cm)=14910 cm−1\tilde{\nu} = \frac{1}{\lambda} = \frac{1}{(6.707 \times 10^{-5}\text{ cm})} = 14910\text{ cm}^{-1}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the relationship λ=cν\lambda = \frac{c}{\nu} to compute the wavelength.

You performed the unit conversions to nanometers and reciprocal centimeters accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Periodic Group Constraint Overlooked

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the crimson-red flame exclusively with strontium without checking the periodic group constraint given in the prompt (Group 1 alkali metal vs. Group 2 alkaline earth metal).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Flame Color to the Specified Periodic Group
  • Both Li+\text{Li}^+ (Group 1) and Sr2+\text{Sr}^{2+} (Group 2) yield crimson-red flame tests.

  • Always verify the group classification given in the prompt before finalizing an element's identity based on flame color alone.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Check the prompt's group requirement: the cation must be a Group 1 alkali metal.

  2. Recall the characteristic flame test colors of alkali metals: Li+\text{Li}^+ = crimson-red, Na+\text{Na}^+ = yellow, K+\text{K}^+ = lilac, Rb+\text{Rb}^+ = red-violet, Cs+\text{Cs}^+ = blue-violet.

  3. Match the prominent emission line at 670.7 nm670.7\text{ nm} (2p→2s2p \rightarrow 2s transition) to the lithium ion.

Final answer

(a) λ=670.7 nm\lambda = 670.7\text{ nm}; (b) Lithium ion (Li+\text{Li}^+); (c) ν~=1.491×104 cm−1\tilde{\nu} = 1.491 \times 10^4\text{ cm}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the flame test colors of both Group 1 (alkali metals) and Group 2 (alkaline earth metals) side by side.

  • Highlight given periodic group constraints in problem statements to avoid confusing elements that share similar flame hues (such as Li\text{Li} and Sr\text{Sr}, or Ca\text{Ca} and other orange-red emitters).

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly converts meters to nanometers by multiplying by 10⁶ instead of 10⁹, resulting in a wavelength that is off by three orders of magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=cν=2.998×1084.470×1014=6.707×10−7 m\lambda = \frac{c}{\nu} = \frac{2.998 \times 10^8}{4.470 \times 10^{14}} = 6.707 \times 10^{-7}\text{ m}

  2. Step 2

    λ=6.707×10−7×106 nm=0.6707 nm\lambda = 6.707 \times 10^{-7} \times 10^6\text{ nm} = 0.6707\text{ nm}

    Correct

    λ=6.707×10−7 m×109 nm1 m=670.7 nm\lambda = 6.707 \times 10^{-7}\text{ m} \times \frac{10^9\text{ nm}}{1\text{ m}} = 670.7\text{ nm}

    You multiplied by 10610^6 rather than 10910^9. The prefix 'nano-' denotes 10−910^{-9}, so 1 m=109 nm1\text{ m} = 10^9\text{ nm}.

  3. Step 3

    Lithium (LiX+)\text{Lithium } (\ce{Li+})

  4. Step 4

    \tilde{ν\nu} = 16.707×10−5 cm\frac{1}{6.707 \times 10^{-5}\text{ cm}} = 1.491 ×\times 10^4 cm\text{ cm}^{-1}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the relationship λ=cν\lambda = \frac{c}{\nu} to compute the wavelength in meters.

You correctly identified the alkali metal as lithium from the emission signature.

You correctly converted the wavelength to centimeters before finding the reciprocal wavenumber in cm−1\text{cm}^{-1}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix confusion (micro vs. nano)

Multiplying by 10610^6 instead of 10910^9 when converting meters to nanometers.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the prefix multiplier for micro- (10−610^{-6}) or mega- (10610^6) with nano- (10−910^{-9}), leading to an answer that is three orders of magnitude too small.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Prefix Multipliers
  • 1 m=109 nm1\text{ m} = 10^9\text{ nm} (1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}), while 1 m=106 μm1\text{ m} = 10^6\ \mu\text{m} (1 μm=10−6 m1\ \mu\text{m} = 10^{-6}\text{ m}).

  • Write out the full unit conversion factor with explicit units canceling, m×109 nm1 m\text{m} \times \frac{10^9\text{ nm}}{1\text{ m}}, to avoid substituting the wrong power of ten.

Visible Light Sanity Check
  • Visible light wavelengths always fall between approximately 380 nm380\text{ nm} and 750 nm750\text{ nm}.

  • Whenever you calculate a wavelength in the visible spectrum, check whether your final value in nanometers falls in the hundreds (e.g., around 400–750 nm400\text{--}750\text{ nm}), not under 1 nm1\text{ nm}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the definition of nanometers: 1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}, so 1 m=109 nm1\text{ m} = 10^9\text{ nm}.

  2. Multiply the wavelength in meters by 109 nm/m10^9\text{ nm/m}: λ=6.707×10−7 m×109 nm/m=670.7 nm\lambda = 6.707 \times 10^{-7}\text{ m} \times 10^9\text{ nm/m} = 670.7\text{ nm}.

Final answer

(a) λ=670.7 nm\lambda = 670.7\text{ nm}; (b) Lithium ion (LiX+\ce{Li+}); (c) ν~=1.491×104 cm−1\tilde{\nu} = 1.491 \times 10^4\text{ cm}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard SI prefixes from pico- (10−1210^{-12}) up to giga- (10910^9) to build automatic recall.

  • Before finishing any wavelength problem involving visible flame colors, verify that the value is in the 400–750 nm400\text{--}750\text{ nm} window.

OverviewACEpath Teacher's Diagnosis

03 The student directly inverts the wavelength in meters without converting it to centimeters, reporting the wavenumber in reciprocal meters instead of reciprocal centimeters.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=cν=2.998×108 m/s4.470×1014 s−1  ⟹  λ=6.707×10−7 m=670.7 nm\lambda = \frac{c}{\nu} = \frac{2.998 \times 10^8\text{ m/s}}{4.470 \times 10^{14}\text{ s}^{-1}} \implies \lambda = 6.707 \times 10^{-7}\text{ m} = 670.7\text{ nm}

  2. Step 2

    Lithium (Li+)\text{Lithium (Li}^+\text{)}

  3. Step 3

    ν~=1λ  ⟹  ν~=16.707×10−7=1.491×106 cm−1\tilde{\nu} = \frac{1}{\lambda} \implies \tilde{\nu} = \frac{1}{6.707 \times 10^{-7}} = 1.491 \times 10^6\text{ cm}^{-1}

    Correct

    ν~=16.707×10−5 cm=1.491×104 cm−1\tilde{\nu} = \frac{1}{6.707 \times 10^{-5}\text{ cm}} = 1.491 \times 10^4\text{ cm}^{-1}

    You substituted the wavelength in meters (6.707×10−7 m6.707 \times 10^{-7}\text{ m}) directly into the reciprocal formula without converting it to centimeters first. As a result, 16.707×10−7 m=1.491×106 m−1\frac{1}{6.707 \times 10^{-7}\text{ m}} = 1.491 \times 10^6\text{ m}^{-1}, which is off by a factor of 100100 from reciprocal centimeters.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the relationship λ=cν\lambda = \frac{c}{\nu} to find the wavelength in meters and nanometers.

You correctly identified the lithium cation (LiX+\ce{Li+}) from the emission wavelength and characteristic crimson flame color.

You correctly stated the definition of wavenumber as ν~=1λ\tilde{\nu} = \frac{1}{\lambda}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error in Reciprocal Calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the wavelength in meters into ν~=1λ\tilde{\nu} = \frac{1}{\lambda} without converting the length unit from meters to centimeters prior to taking the reciprocal, causing the resulting value to be in m−1\text{m}^{-1} rather than cm−1\text{cm}^{-1}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Alignment Before Inversion
  • Because cm−1=1cm\text{cm}^{-1} = \frac{1}{\text{cm}}, the wavelength in the denominator must have units of centimeters before evaluating the fraction.

  • Always convert λ\lambda from meters to centimeters by multiplying by 100 cm/m100\text{ cm/m} before calculating ν~=1λ\tilde{\nu} = \frac{1}{\lambda}, or multiply the result in m−1\text{m}^{-1} by 1 m100 cm\frac{1\text{ m}}{100\text{ cm}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the wavelength from meters to centimeters: λ=6.707×10−7 m×100 cm1 m=6.707×10−5 cm\lambda = 6.707 \times 10^{-7}\text{ m} \times \frac{100\text{ cm}}{1\text{ m}} = 6.707 \times 10^{-5}\text{ cm}.

  2. Substitute λ\lambda in centimeters into the wavenumber formula: ν~=16.707×10−5 cm≈1.491×104 cm−1\tilde{\nu} = \frac{1}{6.707 \times 10^{-5}\text{ cm}} \approx 1.491 \times 10^4\text{ cm}^{-1}.

Final answer

(a) λ=670.7 nm\lambda = 670.7\text{ nm}; (b) Lithium ion (LiX+\ce{Li+}); (c) ν~=1.491×104 cm−1\tilde{\nu} = 1.491 \times 10^4\text{ cm}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write explicit units inside your calculation steps so that reciprocal units such as m−1\text{m}^{-1} are not accidentally labeled as cm−1\text{cm}^{-1}.

  • Practice converting units both before taking reciprocals and after taking reciprocals to build flexibility with spectroscopic units.

Lock it in

Similar question

01

A student tests an unknown Group 2 alkaline earth metal chloride in a flame test and observes a brick-red to orange-red flame. Identify the metal cation.

Answer

Calcium ion (Ca2+\text{Ca}^{2+}). Calcium is the Group 2 alkaline earth metal that produces a characteristic brick-red/orange-red flame.

02

An unknown Group 1 metal exhibits a strong emission line at λ=589.0 nm\lambda = 589.0\text{ nm} during spectroscopy. (a) Calculate the frequency (ν\nu) in Hz\text{Hz} (c=2.998×108 m/sc = 2.998 \times 10^8\text{ m/s}). (b) Identify the cation.

Answer

(a) ν=cλ=2.998×108 m/s589.0×10−9 m=5.090×1014 Hz\nu = \frac{c}{\lambda} = \frac{2.998 \times 10^8\text{ m/s}}{589.0 \times 10^{-9}\text{ m}} = 5.090 \times 10^{14}\text{ Hz}. (b) Sodium ion (Na+\text{Na}^+), which is the Group 1 alkali metal characterized by intense yellow emission at 589 nm589\text{ nm} (the sodium D-line).

03

A metal salt from Group 1 produces a lilac flame, and a transition is recorded with a wavenumber of ν~=1.305×104 cm−1\tilde{\nu} = 1.305 \times 10^4\text{ cm}^{-1}. (a) Calculate the wavelength λ\lambda in nm\text{nm}. (b) Identify the metal cation.

Answer

(a) λ=1ν~=11.305×104 cm−1=7.663×10−5 cm=766.3 nm\lambda = \frac{1}{\tilde{\nu}} = \frac{1}{1.305 \times 10^4\text{ cm}^{-1}} = 7.663 \times 10^{-5}\text{ cm} = 766.3\text{ nm}. (b) Potassium ion (K+\text{K}^+), which is the Group 1 alkali metal responsible for a lilac flame and emission near 766 nm766\text{ nm}.

Loading workspace…