Resources

A standard galvanic cell operates at 298 K298\text{ K} using the following half-reactions: Zn2+(aq)+2e−→Zn(s)\text{Zn}^{2+}(aq) + 2e^- \rightarrow \text{Zn}(s) with E∘=−0.76 VE^\circ = -0.76\text{ V}, and Cu2+(aq)+2e−→Cu(s)\text{Cu}^{2+}(aq) + 2e^- \rightarrow \text{Cu}(s) with E∘=+0.34 VE^\circ = +0.34\text{ V}. For this spontaneous cell, identify: (a) the anode electrode, (b) the cathode electrode, (c) the direction of electron flow through the external wire, and (d) the standard cell potential Ecell∘E^\circ_{\text{cell}}.

Answer and steps

Final answer

(a) Anode: Zn(s)\text{Zn}(s); (b) Cathode: Cu(s)\text{Cu}(s); (c) Electrons flow from the Zn\text{Zn} electrode (anode) to the Cu\text{Cu} electrode (cathode); (d) Ecell∘=+1.10 VE^\circ_{\text{cell}} = +1.10\text{ V}.

Steps

01

Compare the Standard Reduction Potentials

In a spontaneous electrochemical (galvanic) cell, the half-cell with the more positive (higher) standard reduction potential (E∘E^\circ) has a greater tendency to gain electrons and undergo reduction. The half-cell with the less positive (more negative) reduction potential will be forced to lose electrons and undergo oxidation.

Comparing the two standard reduction potentials:

  • For copper: E∘(CuX2+/Cu)=+0.34 VE^\circ(\ce{Cu^{2+}/Cu}) = +0.34\text{ V}
  • For zinc: E∘(ZnX2+/Zn)=−0.76 VE^\circ(\ce{Zn^{2+}/Zn}) = -0.76\text{ V}

Since +0.34 V>−0.76 V+0.34\text{ V} > -0.76\text{ V}, the CuX2+/Cu\ce{Cu^{2+}/Cu} half-reaction undergoes reduction, and the ZnX2+/Zn\ce{Zn^{2+}/Zn} half-reaction is reversed to undergo oxidation.


02

Identify the Anode and Cathode Electrodes

  • Oxidation occurs at the anode (mnemonic: An Ox): Zn(s)→Zn2+(aq)+2e−\ce{Zn}(s) \rightarrow \ce{Zn}^{2+}(aq) + 2e^- Therefore, the anode electrode is Zn(s)\ce{Zn}(s).
  • Reduction occurs at the cathode (mnemonic: Red Cat): Cu2+(aq)+2e−→Cu(s)\ce{Cu}^{2+}(aq) + 2e^- \rightarrow \ce{Cu}(s) Therefore, the cathode electrode is Cu(s)\ce{Cu}(s).

03

Determine the Direction of Electron Flow

Electrons are generated at the anode during the oxidation of Zn(s)\ce{Zn}(s) and travel through the external circuit toward the cathode, where they are consumed by Cu2+(aq)\ce{Cu}^{2+}(aq) ions during reduction.

  • Direction of electron flow: Through the external wire from the Zn\ce{Zn} electrode (anode) to the Cu\ce{Cu} electrode (cathode).

04

Calculate the Standard Cell Potential (Ecell∘E^\circ_{\text{cell}})

Using the standard cell potential formula: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}

Substitute the respective reduction potentials: Ecell∘=+0.34 V−(−0.76 V)=+0.34 V+0.76 V=+1.10 VE^\circ_{\text{cell}} = +0.34\text{ V} - (-0.76\text{ V}) = +0.34\text{ V} + 0.76\text{ V} = +1.10\text{ V}

Common Pitfall: When using the formula Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}, both values must be plugged in directly as standard reduction potentials. Do not manually invert the sign of the anode potential before substituting it into this formula.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the definitions of anode and cathode, assigning reduction to the anode and oxidation to the cathode.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Cu has higher reduction potential (+0.34 V>−0.76 V+0.34\text{ V} > -0.76\text{ V}), so it reduces at the anode.   ⟹  \implies Anode: Cu(s)\text{Cu}(s)

    Correct

    Cu2+\text{Cu}^{2+} has the higher reduction potential (+0.34 V>−0.76 V+0.34\text{ V} > -0.76\text{ V}), so it undergoes reduction at the cathode. Therefore, Zn(s)\text{Zn}(s) must undergo oxidation at the anode: Anode: Zn(s)\text{Zn}(s).

    You correctly identified that copper undergoes reduction because it has the higher reduction potential. However, reduction always takes place at the cathode, not the anode (remember: An Ox and Red Cat). Because zinc is oxidized, the anode electrode is Zn(s)\text{Zn}(s).

  2. Step 2

    Zn oxidizes at the cathode.   ⟹  \implies Cathode: Zn(s)\text{Zn}(s)

    Correct

    Reduction occurs at the cathode: Cu2+(aq)+2e−→Cu(s)\text{Cu}^{2+}(aq) + 2e^- \rightarrow \text{Cu}(s), so the cathode is Cu(s)\text{Cu}(s).

    You associated oxidation with the cathode, but oxidation occurs exclusively at the anode. Since copper is reduced, the cathode electrode is Cu(s)\text{Cu}(s).

  3. Step 3

    Electrons flow from anode to cathode.   ⟹  \implies From Cu\text{Cu} to Zn\text{Zn} through the wire.

    Correct

    Electrons flow from the anode (Zn\text{Zn}) to the cathode (Cu\text{Cu}) through the external wire.

    You correctly stated the general principle that electrons travel from the anode to the cathode through the external wire. Because your electrode identities were inverted in the previous steps, your resulting physical direction was reversed.

  4. Step 4

    Ecell∘=Ecathode∘−Eanode∘=−0.76 V−(+0.34 V)=−1.10 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = -0.76\text{ V} - (+0.34\text{ V}) = -1.10\text{ V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=+0.34 V−(−0.76 V)=+1.10 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.34\text{ V} - (-0.76\text{ V}) = +1.10\text{ V}

    You used the correct equation for standard cell potential. Substituting your inverted cathode and anode values produced a negative potential, which contradicts the spontaneous nature of a standard galvanic cell (Ecell∘>0E^\circ_{\text{cell}} > 0).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly compared the reduction potentials to identify that copper undergoes reduction and zinc undergoes oxidation.

You correctly stated that electrons flow through the external wire from the anode to the cathode.

You selected and correctly applied the standard cell potential equation Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Anode/Cathode definition confusion

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the definitions of anode and cathode, associating reduction with the anode and oxidation with the cathode instead of applying the standard electrochemistry definitions (Oxidation at the Anode, Reduction at the Cathode).

REASONING PATH
Your ACEpath teacher’s suggested approach
Electrode Mnemonics
  • Oxidation always occurs at the Anode (An Ox); Reduction always occurs at the Cathode (Red Cat).

  • Pair the consonants together (C and R: Cathode = Reduction) and the vowels together (A and O: Anode = Oxidation) before labeling electrodes.

Spontaneous Cell Potential Sign Check
  • Every operating galvanic (voltaic) cell must have a positive standard cell potential (Ecell∘>0E^\circ_{\text{cell}} > 0).

  • If your calculated Ecell∘E^\circ_{\text{cell}} is negative, check whether you swapped the cathode and anode reduction potentials.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the reduction potentials: E∘(Cu2+/Cu)=+0.34 V>E∘(Zn2+/Zn)=−0.76 VE^\circ(\text{Cu}^{2+}/\text{Cu}) = +0.34\text{ V} > E^\circ(\text{Zn}^{2+}/\text{Zn}) = -0.76\text{ V}. Therefore, Cu2+\text{Cu}^{2+} is reduced and Zn\text{Zn} is oxidized.

  2. Assign electrodes using An Ox and Red Cat: Oxidation occurs at the anode, so the anode is Zn(s)\text{Zn}(s). Reduction occurs at the cathode, so the cathode is Cu(s)\text{Cu}(s).

  3. Trace electron movement: Electrons are produced at the anode by oxidation and consumed at the cathode by reduction, so electrons flow through the external wire from Zn\text{Zn} to Cu\text{Cu}.

  4. Calculate Ecell∘E^\circ_{\text{cell}}: Ecell∘=Ecathode∘−Eanode∘=+0.34 V−(−0.76 V)=+1.10 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.34\text{ V} - (-0.76\text{ V}) = +1.10\text{ V}.

Final answer

(a) Anode: Zn(s)\text{Zn}(s); (b) Cathode: Cu(s)\text{Cu}(s); (c) Electrons flow from Zn\text{Zn} to Cu\text{Cu} through the external wire; (d) Ecell∘=+1.10 VE^\circ_{\text{cell}} = +1.10\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic pairs: An Ox (Anode = Oxidation) and Red Cat (Reduction = Cathode).

  • Use the sign of Ecell∘E^\circ_{\text{cell}} as a built-in sanity check: galvanic cells must always produce a positive voltage under standard conditions.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies the standard cell potential formula by subtracting the cathode from the anode, yielding a negative cell potential for a spontaneous cell.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Anode: Zn(s)\text{Zn}(s), Cathode: Cu(s)\text{Cu}(s)

  2. Step 2

    From Zn\text{Zn} (anode) to Cu\text{Cu} (cathode) through the wire.

  3. Step 3

    Ecell∘=Eanode∘−Ecathode∘⟹Ecell∘=−0.76 V−0.34 V=−1.10 VE^\circ_{\text{cell}} = E^\circ_{\text{anode}} - E^\circ_{\text{cathode}} \Longrightarrow E^\circ_{\text{cell}} = -0.76\text{ V} - 0.34\text{ V} = -1.10\text{ V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=+0.34 V−(−0.76 V)=+1.10 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.34\text{ V} - (-0.76\text{ V}) = +1.10\text{ V}

    The standard reduction potential of the anode must be subtracted from that of the cathode: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}. Because a galvanic cell operates spontaneously, its standard cell potential must be positive (Ecell∘>0E^\circ_{\text{cell}} > 0).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified Zn(s)\text{Zn}(s) as the anode and Cu(s)\text{Cu}(s) as the cathode based on their standard reduction potentials.

You correctly stated that electrons flow from the anode to the cathode through the external wire.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Cell Potential Formula

You subtracted the cathode potential from the anode potential (Eanode∘−Ecathode∘E^\circ_{\text{anode}} - E^\circ_{\text{cathode}}) instead of subtracting the anode from the cathode.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A spontaneous galvanic cell must always have a positive cell potential (Ecell∘>0E^\circ_{\text{cell}} > 0). When using standard reduction potentials, the correct relation is Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}, which represents (more positive reduction potential) minus (less positive reduction potential).

REASONING PATH
Your ACEpath teacher’s suggested approach
Standard Cell Potential Formula
  • Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} (where both terms are standard reduction potentials).

  • Always substitute the reduction half-cell (cathode) first, then subtract the oxidation half-cell (anode).

Spontaneity Sanity Check
  • For any operational galvanic (voltaic) cell, ΔG∘<0\Delta G^\circ < 0 and Ecell∘>0E^\circ_{\text{cell}} > 0.

  • If your calculated Ecell∘E^\circ_{\text{cell}} is negative, immediately check whether you inverted the cathode and anode terms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the formula for standard cell potential using reduction potentials: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}.

  2. Substitute Ecathode∘=+0.34 VE^\circ_{\text{cathode}} = +0.34\text{ V} and Eanode∘=−0.76 VE^\circ_{\text{anode}} = -0.76\text{ V}: Ecell∘=+0.34 V−(−0.76 V)E^\circ_{\text{cell}} = +0.34\text{ V} - (-0.76\text{ V}).

  3. Simplify the double negative: Ecell∘=+0.34 V+0.76 V=+1.10 VE^\circ_{\text{cell}} = +0.34\text{ V} + 0.76\text{ V} = +1.10\text{ V}.

Final answer

(a) Anode: Zn(s)\text{Zn}(s); (b) Cathode: Cu(s)\text{Cu}(s); (c) Electrons flow from Zn\text{Zn} (anode) to Cu\text{Cu} (cathode) through the wire; (d) Ecell∘=+1.10 VE^\circ_{\text{cell}} = +1.10\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic 'Cathode minus Anode' (alphabetical order reversed: C−AC - A) for Ecell∘=Ecat∘−Ean∘E^\circ_{\text{cell}} = E^\circ_{\text{cat}} - E^\circ_{\text{an}}.

  • Always perform a sign check: a galvanic cell must produce a positive Ecell∘E^\circ_{\text{cell}}.

  • Practice calculating cell potentials with other metal couples, paying special attention to handling double negatives correctly.

OverviewACEpath Teacher's Diagnosis

03 The student believes electrons flow toward the source of electrons (the anode) rather than toward the cathode where reduction consumes them.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Zn has lower E∘, so Zn is oxidized.  ⟹  Anode: Zn(s)\text{Zn has lower } E^\circ\text{, so Zn is oxidized.} \implies \text{Anode: Zn}(s)

  2. Step 2

    Cu has higher E∘, so Cu2+ is reduced.  ⟹  Cathode: Cu(s)\text{Cu has higher } E^\circ\text{, so } \text{Cu}^{2+} \text{ is reduced.} \implies \text{Cathode: Cu}(s)

  3. Step 3

    Electrons are produced at the cathode and From Cu to Zn through the wire.\text{Electrons are produced at the cathode and From Cu to Zn through the wire.}

    Correct

    Electrons flow from the Zn electrode (anode) to the Cu electrode (cathode).\text{Electrons flow from the Zn electrode (anode) to the Cu electrode (cathode).}

    Oxidation releases electrons at the anode (Zn→ZnX2++2 eX−\ce{Zn -> Zn^{2+} + 2e-}), while reduction consumes electrons at the cathode (CuX2++2 eX−→Cu\ce{Cu^{2+} + 2e- -> Cu}). Therefore, electrons always travel through the external circuit from the anode to the cathode.

  4. Step 4

    Ecell∘=Ecathode∘−Eanode∘=+0.34 V−(−0.76 V)=+1.10 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.34\text{ V} - (-0.76\text{ V}) = +1.10\text{ V}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the standard reduction potentials to determine which half-cell undergoes oxidation and which undergoes reduction.

You accurately identified the anode as zinc and the cathode as copper.

You correctly set up and evaluated the standard cell potential formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Direction of electron flow reversed

You stated that electrons are produced at the cathode and travel from copper to zinc.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused where electrons are generated versus where they are consumed in an electrochemical cell. In oxidation, electrons are lost (released as products), which occurs at the anode. In reduction, electrons are gained (consumed as reactants), which occurs at the cathode. As a result, electrons spontaneously flow from the electron source (anode) to the electron sink (cathode).

REASONING PATH
Your ACEpath teacher’s suggested approach
Anode vs. Cathode Half-Reactions
  • Oxidation always occurs at the anode (An Ox), releasing electrons. Reduction always occurs at the cathode (Red Cat), consuming electrons.

  • Write the oxidation half-reaction with electrons on the product side to see that electrons emerge from the anode.

External Circuit Flow
  • Electrons in any galvanic cell move spontaneously from lower reduction potential (anode) to higher reduction potential (cathode).

  • Trace electron movement directly from the anode (source) through the wire to the cathode (destination).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the oxidation half-reaction at the anode: Zn(s)→Zn2+(aq)+2e−\ce{Zn}(s) \rightarrow \ce{Zn}^{2+}(aq) + 2e^-.

  2. Write the reduction half-reaction at the cathode: Cu2+(aq)+2e−→Cu(s)\ce{Cu}^{2+}(aq) + 2e^- \rightarrow \ce{Cu}(s).

  3. Notice that e−e^- are produced at the anode and consumed at the cathode.

  4. Conclude that electrons travel through the external wire from the anode (Zn\ce{Zn}) to the cathode (Cu\ce{Cu}).

Final answer

(a) Anode: Zn(s)\text{Zn}(s); (b) Cathode: Cu(s)\text{Cu}(s); (c) From the Zn\text{Zn} electrode (anode) to the Cu\text{Cu} electrode (cathode); (d) Ecell∘=+1.10 VE^\circ_{\text{cell}} = +1.10\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember the memory aid: Anode →\rightarrow Cathode (alphabetical order, A to C) for external electron flow.

  • Whenever finding electron flow, sketch or write the half-reactions to confirm which electrode is generating free electrons.

Lock it in

Similar question

01

A standard galvanic cell is constructed from Mg2+(aq)+2e−→Mg(s)\text{Mg}^{2+}(aq) + 2e^- \rightarrow \text{Mg}(s) (E∘=−2.37 VE^\circ = -2.37\text{ V}) and Fe2+(aq)+2e−→Fe(s)\text{Fe}^{2+}(aq) + 2e^- \rightarrow \text{Fe}(s) (E∘=−0.44 VE^\circ = -0.44\text{ V}). Identify the anode, cathode, and calculate Ecell∘E^\circ_{\text{cell}}.

Answer

Anode: Mg(s)\text{Mg}(s); Cathode: Fe(s)\text{Fe}(s); Ecell∘=+1.93 VE^\circ_{\text{cell}} = +1.93\text{ V}. Since −0.44 V>−2.37 V-0.44\text{ V} > -2.37\text{ V}, iron is reduced at the cathode and magnesium is oxidized at the anode: Ecell∘=−0.44 V−(−2.37 V)=+1.93 VE^\circ_{\text{cell}} = -0.44\text{ V} - (-2.37\text{ V}) = +1.93\text{ V}.

02

A standard galvanic cell operates with silver (E∘(Ag+/Ag)=+0.80 VE^\circ(\text{Ag}^+/\text{Ag}) = +0.80\text{ V}) and lead (E∘(Pb2+/Pb)=−0.13 VE^\circ(\text{Pb}^{2+}/\text{Pb}) = -0.13\text{ V}). State the direction of electron flow in the external wire and calculate Ecell∘E^\circ_{\text{cell}}.

Answer

Electrons flow from the Pb\text{Pb} electrode to the Ag\text{Ag} electrode; Ecell∘=+0.93 VE^\circ_{\text{cell}} = +0.93\text{ V}. Lead has the lower reduction potential, so it oxidizes at the anode. Silver ions reduce at the cathode. Electrons travel from anode (Pb\text{Pb}) to cathode (Ag\text{Ag}). Ecell∘=+0.80 V−(−0.13 V)=+0.93 VE^\circ_{\text{cell}} = +0.80\text{ V} - (-0.13\text{ V}) = +0.93\text{ V}.

03

Consider a cell with half-reactions Sn4+(aq)+2e−→Sn2+(aq)\text{Sn}^{4+}(aq) + 2e^- \rightarrow \text{Sn}^{2+}(aq) (E∘=+0.15 VE^\circ = +0.15\text{ V}) and Cr2O72−(aq)+14H+(aq)+6e−→2Cr3+(aq)+7H2O(l)\text{Cr}_2\text{O}_7^{2-}(aq) + 14\text{H}^+(aq) + 6e^- \rightarrow 2\text{Cr}^{3+}(aq) + 7\text{H}_2\text{O}(l) (E∘=+1.33 VE^\circ = +1.33\text{ V}), using inert platinum electrodes. Identify the anode half-reaction and calculate the standard cell potential.

Answer

Anode half-reaction: Sn2+(aq)→Sn4+(aq)+2e−\text{Sn}^{2+}(aq) \rightarrow \text{Sn}^{4+}(aq) + 2e^-; Ecell∘=+1.18 VE^\circ_{\text{cell}} = +1.18\text{ V}. Dichromate has the higher potential (+1.33 V+1.33\text{ V}) and is reduced at the cathode. Sn2+\text{Sn}^{2+} is oxidized at the anode. Ecell∘=+1.33 V−0.15 V=+1.18 VE^\circ_{\text{cell}} = +1.33\text{ V} - 0.15\text{ V} = +1.18\text{ V}.

Loading workspace…