Resources
An analytical chemist measures out of a concentrated nitric acid () stock solution and transfers it into a volumetric flask. Water is added until the total volume reaches , and the solution is thoroughly mixed. Determine the dilution factor (defined as the ratio of final volume to initial volume) and the final molarity of the diluted nitric acid solution.
Answer and steps
Final answer
,
Steps
Calculate the Dilution Factor
The dilution factor () describes how many times a stock solution is diluted and is defined as the ratio of the final solution volume () to the initial stock volume ():
Substitute the given volumes:
Rounding to three significant figures (matching the three significant figures in ):
Calculate the Final Molarity ()
When diluting a solution with pure water, the total amount of solute (moles of ) remains constant:
Using the dilution equation:
Rearrange the equation to solve for the final molarity, :
Substitute the given values:
(Alternatively, because the concentration decreases proportionally to the dilution factor: .)
Key Takeaway and Common Pitfall
- Volume Units: As long as and share the same unit (here, ), there is no need to convert them to liters because the volume units cancel out.
- Dilution vs. Mixing: Ensure represents the total final volume (), not the amount of water added ().
Typical errors
01 The student inverts the dilution factor formula as initial volume divided by final volume, resulting in 0.0700 instead of 14.3.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You inverted the ratio for the dilution factor. As given in the problem, the dilution factor is the ratio of final volume to initial volume (), which represents how many times the solution was diluted.
- Step 2
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly stated and rearranged the dilution relationship .
You substituted the correct volume and concentration values with matching units.
You reported the final concentration with the correct units and appropriate significant figures.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up the dilution factor as initial volume divided by final volume instead of final volume divided by initial volume.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the dilution factor (how many times more dilute the solution becomes, which is always for a standard dilution) with the volume fraction or concentration ratio .
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Dilution Factor Magnitude
For any dilution where solvent is added, the total volume increases, so the dilution factor must be greater than .
Always verify that .
- Relate Dilution Factor to Molarity
The final molarity equals the stock molarity divided by the dilution factor ().
Check that multiplying your calculated by the dilution factor gives back the original concentrated stock molarity .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the standard definition of dilution factor: .
Substitute the given volumes:
Round to three significant figures to match : .
,
02 The student treats the 500.0 mL of water as added solvent rather than the total final volume, finding a total volume of 535.0 mL and a final molarity of 0.393 M.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The problem states that water is added until the total volume reaches in a volumetric flask. This means the final solution volume is , not .
- Step 2Correct
You correctly set up the ratio for the dilution factor, but substituting your calculated instead of the true final volume of led to an incorrect value.
- Step 3Correct
You used the correct dilution formula and carried out the arithmetic properly, but the result was shifted by your earlier volume error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the dilution factor formula as the ratio of final volume to initial volume.
You selected the appropriate dilution formula to find the final molarity.
You maintained proper units and rounded your final values to three significant figures.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou added the target volume to the initial stock volume instead of using it directly as the final volume.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisinterpreting the laboratory phrase 'diluted to a total volume of' or 'water is added until the total volume reaches' as adding that specified volume of solvent.
REASONING PATH
Your ACEpath teacher’s suggested approach- Parse Volumetric Wording
Phrases like 'diluted to a volume of ' or 'filled to the mark at ' specify , not .
Look for keywords like 'to a final volume of' or 'until the mark reaches' and set directly equal to that target volume.
- Calculate Added Solvent Only When Explicitly Stated
Only use when the problem explicitly says a certain volume of solvent is added to the initial solution.
Check whether the question specifies the amount of water added or the total capacity of the volumetric flask.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the final volume directly from the problem statement: .
Calculate the dilution factor: .
Calculate the final molarity using .
,
03 The student mistakenly multiplies the initial molarity by the dilution factor instead of dividing by it, obtaining a concentrated value of 85.8 M.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Adding solvent decreases concentration, so the final molarity must be smaller than the initial molarity. The final concentration equals the initial concentration divided by the dilution factor, not multiplied by it.
- Step 3Correct
This value was computed correctly from your equation in Step 2, but it is incorrect due to the inverted operation.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the formula for the dilution factor as final volume divided by initial volume.
You correctly substituted the volume values and rounded the dilution factor to three significant figures.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up the dilution relationship by multiplying the concentration by the dilution factor rather than dividing.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the dilution factor as a multiplier for concentration rather than a measure of how many times more dilute (less concentrated) the solution becomes.
REASONING PATH
Your ACEpath teacher’s suggested approach- Physical Reality Check
Diluting a solution by adding solvent always decreases its concentration: .
Whenever you calculate for a dilution, compare it against ; if is larger, you multiplied when you should have divided.
- Conservation of Solute Moles
.
Use directly when calculating final molarity to avoid flipping the fraction.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall that dilution lowers concentration by a factor of : .
Substitute and : .
Calculate and round to three significant figures: .
,
Lock it in
What is the formula for the dilution factor () in terms of initial and final volumes?
. It represents the factor by which the volume increases (and concentration decreases), so it is always for a dilution.
Similar question
A chemist pipettes of a stock solution into a flask and adds water to reach a total volume of . Calculate the dilution factor and the final concentration of the solution.
Answer
. Final molarity .
You need to prepare of a solution from a stock solution. Determine the required dilution factor and the volume of stock solution needed.
Answer
. Initial volume .
A student performs a two-step serial dilution: first, of a stock is diluted to . Then, of that intermediate solution is diluted to a final volume of . Calculate the dilution factor for each step, the overall dilution factor, and the final concentration.
Answer
First dilution factor: . Second dilution factor: . Total dilution factor: . Final concentration: .