Resources

Rather than calculating the standard single bond order, analyze the degree of electron sharing and percent ionic character in a gaseous hydrogen chloride molecule, HCl(g)\text{HCl}(g). The experimental dipole moment of HCl\text{HCl} is μexp=1.08 D\mu_{\text{exp}} = 1.08\text{ D} (where 1 D=3.336×10−30 C⋅m1\text{ D} = 3.336 \times 10^{-30}\text{ C}\cdot\text{m}), and the equilibrium internuclear bond distance is d=1.27×10−10 md = 1.27 \times 10^{-10}\text{ m}. (a) Calculate the theoretical dipole moment μionic\mu_{\text{ionic}} assuming a hypothetical 100%100\% ionic bond with complete electron transfer of one fundamental charge (e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}). (b) Calculate the percent ionic character of the H−Cl\text{H}-\text{Cl} covalent bond. (c) Based on this percentage, determine the effective fractional electronic charge δ\delta (in units of ee) shared unequally between the bonded nuclei.

Answer and steps

Final answer

(a) μionic=q×d=(1.602×10−19 C)(1.27×10−10 m)=2.035×10−29 C⋅m=6.10 D\mu_{\text{ionic}} = q \times d = (1.602 \times 10^{-19}\text{ C})(1.27 \times 10^{-10}\text{ m}) = 2.035 \times 10^{-29}\text{ C}\cdot\text{m} = 6.10\text{ D}. (b) Percent Ionic Character=μexpμionic×100%=1.08 D6.10 D×100%=17.7%\text{Percent Ionic Character} = \frac{\mu_{\text{exp}}}{\mu_{\text{ionic}}} \times 100\% = \frac{1.08\text{ D}}{6.10\text{ D}} \times 100\% = 17.7\%. (c) The effective partial charge is δ=0.177e\delta = 0.177e (or +0.177e+0.177e on H\text{H} and −0.177e-0.177e on Cl\text{Cl}).

Steps

Part (a): Theoretical Dipole Moment for a Purely Ionic Bond

An electric dipole moment μ\mu for two opposite charges +q+q and −q-q separated by a distance dd is given by: μ=q⋅d\mu = q \cdot d

For a hypothetical 100%100\% ionic bond (HX+ClX−\ce{H+Cl-}), a complete elementary charge (e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}) is transferred across the internuclear distance d=1.27×10−10 md = 1.27 \times 10^{-10}\text{ m}: μionic=(1.602×10−19 C)⋅(1.27×10−10 m)=2.035×10−29 C⋅m\mu_{\text{ionic}} = (1.602 \times 10^{-19}\text{ C}) \cdot (1.27 \times 10^{-10}\text{ m}) = 2.035 \times 10^{-29}\text{ C}\cdot\text{m}

To convert this value into debyes (D\text{D}), divide by the conversion factor 1 D=3.336×10−30 C⋅m1\text{ D} = 3.336 \times 10^{-30}\text{ C}\cdot\text{m}: μionic=2.035×10−29 C⋅m3.336×10−30 C⋅m/D≈6.10 D\mu_{\text{ionic}} = \frac{2.035 \times 10^{-29}\text{ C}\cdot\text{m}}{3.336 \times 10^{-30}\text{ C}\cdot\text{m/D}} \approx 6.10\text{ D}


Part (b): Percent Ionic Character

The percent ionic character compares the observed experimental dipole moment to the theoretical maximum from a purely ionic model: Percent Ionic Character=(μexpμionic)⋅100%\text{Percent Ionic Character} = \left(\frac{\mu_{\text{exp}}}{\mu_{\text{ionic}}}\right) \cdot 100\%

Substitute the given experimental value μexp=1.08 D\mu_{\text{exp}} = 1.08\text{ D} and the calculated theoretical value μionic=6.10 D\mu_{\text{ionic}} = 6.10\text{ D}: Percent Ionic Character=(1.08 D6.10 D)⋅100%≈17.7%\text{Percent Ionic Character} = \left(\frac{1.08\text{ D}}{6.10\text{ D}}\right) \cdot 100\% \approx 17.7\%

Common Pitfall: Ensure both dipole moments are in the same units (either both in D\text{D} or both in C⋅m\text{C}\cdot\text{m}) before calculating the ratio.


Part (c): Effective Partial Charge

Because the percent ionic character represents the fraction of a full electron charge transferred: δ=Percent Ionic Character100%⋅e\delta = \frac{\text{Percent Ionic Character}}{100\%} \cdot e

δ=0.177e\delta = 0.177e

Due to the higher electronegativity of chlorine compared to hydrogen, the unequal sharing results in a partial positive charge on hydrogen and a partial negative charge on chlorine: δ+(H)=+0.177eandδ−(Cl)=−0.177e\delta^+(\ce{H}) = +0.177e \quad \text{and} \quad \delta^-(\ce{Cl}) = -0.177e

This confirms that the H−Cl\ce{H-Cl} bond is predominantly covalent with moderate polar character, rather than ionic.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student inverts the ratio for percent ionic character by dividing the theoretical dipole moment by the experimental dipole moment, yielding a percentage greater than 100%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    μionic=(1.602×10−19 C)×(1.27×10−10 m)=2.035×10−29 C⋅m  ⟹  μionic=2.035×10−293.336×10−30=6.10 D\mu_{\text{ionic}} = (1.602 \times 10^{-19}\text{ C}) \times (1.27 \times 10^{-10}\text{ m}) = 2.035 \times 10^{-29}\text{ C}\cdot\text{m} \implies \mu_{\text{ionic}} = \frac{2.035 \times 10^{-29}}{3.336 \times 10^{-30}} = 6.10\text{ D}

  2. Step 2

    % ionic character\text{ ionic character} = (μionicμexp)\left(\frac{\mu_{\text{ionic}}}{\mu_{\text{exp}}}\right) ×\times 100% = (6.10 D1.08 D)\left(\frac{6.10\text{ D}}{1.08\text{ D}}\right) ×\times 100% = 565%

    Correct

    Percent Ionic Character\text{Percent Ionic Character} = (μexpμionic)\left(\frac{\mu_{\text{exp}}}{\mu_{\text{ionic}}}\right) ×\times 100% = (1.08 D6.10 D)\left(\frac{1.08\text{ D}}{6.10\text{ D}}\right) ×\times 100% ≈\approx 17.7%

    You inverted the fraction. Percent ionic character measures how much of the theoretical maximum ionic dipole moment is actually observed experimentally, so the observed experimental value belongs in the numerator and the hypothetical 100%100\% ionic value belongs in the denominator.

  3. Step 3

    δ=565%100%=5.65e\delta = \frac{565\%}{100\%} = 5.65e

    Correct

    δ=17.7%100%⋅e=0.177e\delta = \frac{17.7\%}{100\%} \cdot e = 0.177e

    Your conversion method from percentage to fractional electronic charge was set up properly, but the numerical answer is incorrect due to the inverted ratio from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the theoretical dipole moment using fundamental charge and bond length.

You accurately converted the dipole moment from coulomb-meters to debyes using the appropriate conversion factor.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Dipole Moment Ratio in Percent Ionic Character

You set up the ratio as theoretical over experimental instead of experimental over theoretical.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the reference baseline (the theoretical maximum, which serves as the denominator) with the observed measurement (the numerator) when defining percent ionic character.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Maximum as Denominator
  • In any percentage comparing an observed measurement to an ideal limit, the theoretical limit is the whole (100%100\% base) and must be placed in the denominator: % ionic character=μmeasuredμtheoretical×100%\text{\% ionic character} = \frac{\mu_{\text{measured}}}{\mu_{\text{theoretical}}} \times 100\%.

  • Check whether your calculated percentage is between 0%0\% and 100%100\%. A value exceeding 100%100\% indicates that the ratio has been inverted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the ratio with observed over theoretical: Percent Ionic Character=μexpμionic×100%=1.08 D6.10 D×100%≈17.7%\text{Percent Ionic Character} = \frac{\mu_{\text{exp}}}{\mu_{\text{ionic}}} \times 100\% = \frac{1.08\text{ D}}{6.10\text{ D}} \times 100\% \approx 17.7\%.

  2. Calculate the fractional charge transferred: δ=17.7%100%⋅e=0.177e\delta = \frac{17.7\%}{100\%} \cdot e = 0.177e.

Final answer

(a) 6.10 D6.10\text{ D}; (b) 17.7%17.7\%; (c) δ=0.177e\delta = 0.177e (or +0.177e+0.177e on H\text{H} and −0.177e-0.177e on Cl\text{Cl})

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the formula for percent ionic character as μactualμideal×100%\frac{\mu_{\text{actual}}}{\mu_{\text{ideal}}} \times 100\%.

  • Perform a sanity check on every fractional charge δ\delta; for a neutral diatomic molecule with a single bond, δ\delta must always satisfy 0≤δ≤1e0 \le \delta \le 1e.

OverviewACEpath Teacher's Diagnosis

02 A student forgets to convert the experimental dipole moment from debyes to C·m (or theoretical from C·m to D) before taking the ratio, directly dividing values with mismatched units.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    μionic=(1.602×10−19 C)×(1.27×10−10 m)=2.035×10−29 C⋅m\mu_{\text{ionic}} = (1.602 \times 10^{-19}\text{ C}) \times (1.27 \times 10^{-10}\text{ m}) = 2.035 \times 10^{-29}\text{ C}\cdot\text{m}

  2. Step 2

    % ionic character\text{ ionic character} = (μexpμionic)\left(\frac{\mu_{\text{exp}}}{\mu_{\text{ionic}}}\right) ×\times 100%   ⟹  \implies [1.082.035×10−29]\left[\frac{1.08}{2.035 \times 10^{-29}}\right] ×\times 100% = 5.31 ×\times 10^{30}%

    Correct

    % ionic character\text{ ionic character} = 1.08 D6.10 D\frac{1.08\text{ D}}{6.10\text{ D}} ×\times 100% ≈\approx 17.7%

    You divided the experimental dipole moment in debyes (1.08 D1.08\text{ D}) directly by the theoretical dipole moment in coulomb-meters (2.035×10−29 C⋅m2.035 \times 10^{-29}\text{ C}\cdot\text{m}) without converting them to the same unit.

  3. Step 3

    δ=5.31×1030%100%=5.31×1028e\delta = \frac{5.31 \times 10^{30}\%}{100\%} = 5.31 \times 10^{28}e

    Correct

    δ=17.7%100%⋅e=0.177e\delta = \frac{17.7\%}{100\%} \cdot e = 0.177e

    Your method of dividing the percent ionic character by 100%100\% to find the fractional charge is conceptually sound, but the numerical result is thrown off by the unit error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the dipole moment formula μ=q⋅d\mu = q \cdot d.

You set up the correct ratio formula for percent ionic character: μexpμionic×100%\frac{\mu_{\text{exp}}}{\mu_{\text{ionic}}} \times 100\%.

You recognized that the effective partial charge δ\delta equals the fractional ionic character multiplied by ee.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Mismatch

Dividing quantities expressed in debyes by quantities expressed in coulomb-meters without applying the conversion factor 1 D=3.336×10−30 C⋅m1\text{ D} = 3.336 \times 10^{-30}\text{ C}\cdot\text{m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked unit consistency when evaluating a dimensionless ratio, forgetting that debyes (D\text{D}) and SI dipole units (C⋅m\text{C}\cdot\text{m}) cannot directly cancel.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Cancellation Check
  • Ratios that yield percentages or dimensionless quantities must have identical units in the numerator and denominator.

  • Convert both dipole moments to debyes or both to coulomb-meters before dividing.

Physical Sanity Check
  • A bond's percent ionic character must fall between 0%0\% (purely covalent) and 100%100\% (fully ionic).

  • If your calculated percent ionic character is greater than 100%100\% (e.g., 1030%10^{30}\%), immediately pause and check your unit conversions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the theoretical dipole moment to debyes: μionic=2.035×10−29 C⋅m3.336×10−30 C⋅m/D≈6.10 D\mu_{\text{ionic}} = \frac{2.035 \times 10^{-29}\text{ C}\cdot\text{m}}{3.336 \times 10^{-30}\text{ C}\cdot\text{m/D}} \approx 6.10\text{ D}.

  2. Calculate percent ionic character: 1.08 D6.10 D×100%≈17.7%\frac{1.08\text{ D}}{6.10\text{ D}} \times 100\% \approx 17.7\%.

  3. Calculate effective partial charge: δ=17.7%100%⋅e=0.177e\delta = \frac{17.7\%}{100\%} \cdot e = 0.177e.

Final answer

(a) μionic=6.10 D\mu_{\text{ionic}} = 6.10\text{ D} (or 2.035×10−29 C⋅m2.035 \times 10^{-29}\text{ C}\cdot\text{m}); (b) 17.7%17.7\%; (c) δ=0.177e\delta = 0.177e

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down explicit units next to numbers inside fraction bars to verify they cancel out.

  • Sanity-check percentages to ensure they lie within the physically realistic interval [0%,100%][0\%, 100\%].

OverviewACEpath Teacher's Diagnosis

03 A student expresses the partial charge as the percent value itself rather than dividing by 100 to obtain the fractional electronic charge in units of e.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    μionic=(1.602×10−19 C)×(1.27×10−10 m)=2.035×10−29 C⋅m  ⟹  μionic=2.035×10−293.336×10−30=6.10 D\mu_{\text{ionic}} = (1.602 \times 10^{-19}\text{ C}) \times (1.27 \times 10^{-10}\text{ m}) = 2.035 \times 10^{-29}\text{ C}\cdot\text{m} \implies \mu_{\text{ionic}} = \frac{2.035 \times 10^{-29}}{3.336 \times 10^{-30}} = 6.10\text{ D}

  2. Step 2

    % ionic character\text{ ionic character} = (1.08 D6.10 D)\left(\frac{1.08\text{ D}}{6.10\text{ D}}\right) ×\times 100% = 17.7%

  3. Step 3

    δ=17.7 e\delta = 17.7\text{ e}

    Correct

    δ\delta = Percent Ionic Character100%\frac{\text{Percent Ionic Character}}{100\%} ⋅\cdot e = 17.7%100%\frac{17.7\%}{100\%} ⋅\cdot e = 0.177e

    You directly copied the percentage number (17.717.7) instead of converting the percentage back into its decimal fraction (0.1770.177). A partial charge in a single bond represents a fraction of an elementary charge and must lie between 0e0e and 1e1e.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the hypothetical ionic dipole moment accurately using μ=q⋅d\mu = q \cdot d and properly converted units to debyes.

You correctly evaluated the percent ionic character using the ratio of experimental to ionic dipole moments.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percentage-to-fraction conversion omission

You omitted dividing by 100%100\% when converting percent ionic character into the fractional charge δ\delta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a percentage value (a number out of 100) with the actual dimensionless fraction representing the partial electron transfer δ/e\delta/e.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality of Partial Charge
  • For a neutral diatomic molecule with a single bond, the magnitude of the partial charge δ\delta must satisfy 0≤δ≤1e0 \le \delta \le 1e.

  • Always convert a percent value to a decimal fraction by dividing by 100%100\% before multiplying by ee.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that percent ionic character represents 100%×(δ/e)100\% \times (\delta / e).

  2. Divide 17.7%17.7\% by 100%100\% to obtain the fraction: 17.7%100%=0.177\frac{17.7\%}{100\%} = 0.177.

  3. Multiply by the fundamental charge: δ=0.177e\delta = 0.177e.

Final answer

δ=0.177e\delta = 0.177e

NEXT STEPS
Final Takeaways from Your Teacher
  • Check that partial charge magnitudes for single bonds never exceed 1e1e.

  • Practice converting percent ionic character into fractional electronic charge δ\delta across other hydrogen halides.

Lock it in

Similar question

01

A hypothetical diatomic molecule AB\text{AB} has an experimental dipole moment of 1.50 D1.50\text{ D} and a calculated theoretical ionic dipole moment of 5.00 D5.00\text{ D}. Calculate the percent ionic character of the A−B\text{A}-\text{B} bond.

Answer

% Ionic Character=μexpμionic×100%=1.50 D5.00 D×100%=30.0%\text{\% Ionic Character} = \frac{\mu_{\text{exp}}}{\mu_{\text{ionic}}} \times 100\% = \frac{1.50\text{ D}}{5.00\text{ D}} \times 100\% = 30.0\%.

02

For a gaseous HBr\text{HBr} molecule, the bond distance is 1.41×10−10 m1.41 \times 10^{-10}\text{ m} and the observed dipole moment is 0.82 D0.82\text{ D}. Given 1 D=3.336×10−30 C⋅m1\text{ D} = 3.336 \times 10^{-30}\text{ C}\cdot\text{m} and e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}, determine (a) μionic\mu_{\text{ionic}} in debyes and (b) the percent ionic character.

Answer

(a) μionic=q⋅d=(1.602×10−19 C)(1.41×10−10 m)=2.259×10−29 C⋅m=6.77 D\mu_{\text{ionic}} = q \cdot d = (1.602 \times 10^{-19}\text{ C})(1.41 \times 10^{-10}\text{ m}) = 2.259 \times 10^{-29}\text{ C}\cdot\text{m} = 6.77\text{ D}. (b) % Ionic Character=0.82 D6.77 D×100%≈12.1%\text{\% Ionic Character} = \frac{0.82\text{ D}}{6.77\text{ D}} \times 100\% \approx 12.1\%.

03

The percent ionic character of lithium fluoride, LiF(g)\text{LiF}(g), is approximately 87.0%87.0\%. If the internuclear distance is 1.56×10−10 m1.56 \times 10^{-10}\text{ m}, calculate the experimental dipole moment μexp\mu_{\text{exp}} in debyes.

Answer

First, μionic=(1.602×10−19 C)(1.56×10−10 m)=2.499×10−29 C⋅m=7.49 D\mu_{\text{ionic}} = (1.602 \times 10^{-19}\text{ C})(1.56 \times 10^{-10}\text{ m}) = 2.499 \times 10^{-29}\text{ C}\cdot\text{m} = 7.49\text{ D}. Then, μexp=0.870×7.49 D≈6.52 D\mu_{\text{exp}} = 0.870 \times 7.49\text{ D} \approx 6.52\text{ D}.

Loading workspace…